yay/dependencies.go

309 lines
6.5 KiB
Go
Raw Normal View History

package main
import (
"strings"
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
alpm "github.com/jguer/go-alpm"
rpc "github.com/mikkeloscar/aur"
)
2017-08-04 09:26:53 +00:00
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
type depTree struct {
ToProcess []string
Repo map[string]*alpm.Package
Aur map[string]*rpc.Pkg
Missing stringSet
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
}
type depCatagories struct {
Repo []*alpm.Package
Aur[]*rpc.Pkg
MakeOnly stringSet
Bases map[string][]*rpc.Pkg
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
}
func makeDepTree() *depTree {
dt := depTree{
make([]string, 0),
make(map[string]*alpm.Package),
make(map[string]*rpc.Pkg),
make(stringSet),
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
return &dt
}
func makeDependCatagories() *depCatagories {
dc := depCatagories{
make([]*alpm.Package, 0),
make([]*rpc.Pkg, 0),
make(stringSet),
make(map[string][]*rpc.Pkg),
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
return &dc
}
func getNameFromDep(dep string) string {
return strings.FieldsFunc(dep, func(c rune) bool {
return c == '>' || c == '<' || c == '=' || c == ' '
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
})[0]
}
func getDepCatagories(pkgs []string, dt *depTree) (*depCatagories, error) {
dc := makeDependCatagories()
seen := make(stringSet)
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
for _, pkg := range pkgs {
dep := getNameFromDep(pkg)
alpmpkg, exists := dt.Repo[dep]
if exists {
repoDepCatagoriesRecursive(alpmpkg, dc, dt, false)
dc.Repo = append(dc.Repo, alpmpkg)
delete(dt.Repo, dep)
}
aurpkg, exists := dt.Aur[dep]
if exists {
depCatagoriesRecursive(aurpkg, dc, dt, false, seen)
if !seen.get(aurpkg.PackageBase) {
dc.Aur = append(dc.Aur, aurpkg)
seen.set(aurpkg.PackageBase)
}
_, ok := dc.Bases[aurpkg.PackageBase]
if !ok {
dc.Bases[aurpkg.PackageBase] = make([]*rpc.Pkg, 0)
}
dc.Bases[aurpkg.PackageBase] = append(dc.Bases[aurpkg.PackageBase], aurpkg)
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
delete(dt.Aur, dep)
}
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
return dc, nil
}
func repoDepCatagoriesRecursive(pkg *alpm.Package, dc *depCatagories, dt *depTree, isMake bool) {
pkg.Depends().ForEach(func(_dep alpm.Depend) error {
dep := _dep.Name
alpmpkg, exists := dt.Repo[dep]
if exists {
delete(dt.Repo, dep)
repoDepCatagoriesRecursive(alpmpkg, dc, dt, isMake)
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
if isMake {
dc.MakeOnly.set(alpmpkg.Name())
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
}
dc.Repo = append(dc.Repo, alpmpkg)
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
return nil
})
}
func depCatagoriesRecursive(pkg *rpc.Pkg, dc *depCatagories, dt *depTree, isMake bool, seen stringSet) {
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
for _, deps := range [2][]string{pkg.Depends, pkg.MakeDepends} {
for _, _dep := range deps {
dep := getNameFromDep(_dep)
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
aurpkg, exists := dt.Aur[dep]
if exists {
_, ok := dc.Bases[aurpkg.PackageBase]
if !ok {
dc.Bases[aurpkg.PackageBase] = make([]*rpc.Pkg, 0)
}
dc.Bases[aurpkg.PackageBase] = append(dc.Bases[aurpkg.PackageBase], aurpkg)
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
delete(dt.Aur, dep)
depCatagoriesRecursive(aurpkg, dc, dt, isMake, seen)
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
if !seen.get(aurpkg.PackageBase) {
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
dc.Aur = append(dc.Aur, aurpkg)
seen.set(aurpkg.PackageBase)
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
if isMake {
dc.MakeOnly.set(aurpkg.Name)
}
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
alpmpkg, exists := dt.Repo[dep]
if exists {
delete(dt.Repo, dep)
repoDepCatagoriesRecursive(alpmpkg, dc, dt, isMake)
if isMake {
dc.MakeOnly.set(alpmpkg.Name())
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
}
dc.Repo = append(dc.Repo, alpmpkg)
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
isMake = true
}
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
func getDepTree(pkgs []string) (*depTree, error) {
dt := makeDepTree()
localDb, err := alpmHandle.LocalDb()
if err != nil {
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
return dt, err
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
syncDb, err := alpmHandle.SyncDbs()
if err != nil {
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
return dt, err
}
for _, pkg := range pkgs {
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
//if they explicitly asked for it still look for installed pkgs
/*installedPkg, isInstalled := localDb.PkgCache().FindSatisfier(pkg)
if isInstalled == nil {
dt.Repo[installedPkg.Name()] = installedPkg
continue
}//*/
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
//check the repos for a matching dep
repoPkg, inRepos := syncDb.FindSatisfier(pkg)
if inRepos == nil {
repoTreeRecursive(repoPkg, dt, localDb, syncDb)
continue
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
dt.ToProcess = append(dt.ToProcess, pkg)
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
if len(dt.ToProcess) > 0 {
err = depTreeRecursive(dt, localDb, syncDb, false)
}
return dt, err
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
//takes a repo package
//gives all of the non installed deps
//does again on each sub dep
func repoTreeRecursive(pkg *alpm.Package, dt *depTree, localDb *alpm.Db, syncDb alpm.DbList) (err error) {
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
_, exists := dt.Repo[pkg.Name()]
if exists {
return
}
dt.Repo[pkg.Name()] = pkg
(*pkg).Provides().ForEach(func(dep alpm.Depend) (err error) {
dt.Repo[dep.Name] = pkg
return nil
})
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
(*pkg).Depends().ForEach(func(dep alpm.Depend) (err error) {
_, exists := dt.Repo[dep.Name]
if exists {
return
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
_, isInstalled := localDb.PkgCache().FindSatisfier(dep.String())
if isInstalled == nil {
return
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
repoPkg, inRepos := syncDb.FindSatisfier(dep.String())
if inRepos == nil {
repoTreeRecursive(repoPkg, dt, localDb, syncDb)
return
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
dt.Missing.set(dep.String())
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
return
})
return
}
func depTreeRecursive(dt *depTree, localDb *alpm.Db, syncDb alpm.DbList, isMake bool) (err error) {
nextProcess := make([]string, 0)
currentProcess := make([]string, 0, len(dt.ToProcess))
//strip version conditions
for _, dep := range dt.ToProcess {
currentProcess = append(currentProcess, getNameFromDep(dep))
}
//assume toprocess only contains aur stuff we have not seen
info, err := rpc.Info(currentProcess)
if err != nil {
return
}
//cache the results
for _, pkg := range info {
//copying to p fixes a bug
//would rather not copy but cant find another way to fix
p := pkg
dt.Aur[pkg.Name] = &p
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
//loop through to process and check if we now have
//each packaged cached
//if its not cached we assume its missing
for k, pkgName := range currentProcess {
pkg, exists := dt.Aur[pkgName]
2018-01-31 21:04:21 +00:00
//did not get it in the request
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
if !exists {
dt.Missing.set(dt.ToProcess[k])
continue
}
//for reach dep and makedep
for _, deps := range [2][]string{pkg.Depends, pkg.MakeDepends} {
for _, versionedDep := range deps {
dep := getNameFromDep(versionedDep)
_, exists = dt.Aur[dep]
//we have it cached so skip
if exists {
continue
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
_, exists = dt.Repo[dep]
//we have it cached so skip
if exists {
continue
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
_, exists = dt.Missing[dep]
2018-01-31 21:04:21 +00:00
//we know it does not resolve so skip
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
if exists {
continue
}
//check if already installed
_, isInstalled := localDb.PkgCache().FindSatisfier(versionedDep)
if isInstalled == nil {
continue
}
//check the repos for a matching dep
repoPkg, inRepos := syncDb.FindSatisfier(versionedDep)
if inRepos == nil {
repoTreeRecursive(repoPkg, dt, localDb, syncDb)
continue
}
2018-01-31 21:04:21 +00:00
//if all else fails add it to next search
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
nextProcess = append(nextProcess, versionedDep)
}
}
}
New install algorithm I have replaced the old install and dependancy algorithms with a new design that attemps to be more pacaur like. Mostly in minimizing user input. Ask every thing first then do everything with no need for more user input. It is not yet fully complete but is finished enough so that it works, should not fail in most cases and provides a base for more contributors to help address the existing problems. The new install chain is as follows: Source info about the provided targets Fetch a list of all dependancies needed to install targets I put alot of effort into fetching the dependancy tree while making the least amount of aur requests as possible. I'm actually very happy with how it turned out and yay wil now resolve dependancies noticably faster than pacaur when there are many aur dependancies. Install repo targets by passing to pacman Print dependancy tree and ask to confirm Ask to clean build if directory already exists Download all pkgbuilds Ask to edit all pkgbuilds Ask to continue with the install Download the sources for each packagebuild Build and install every package using -s to get repo deps and -i to install Ask to remove make dependancies There are still a lot of things that need to be done for a fully working system. Here are the problems I found with this system, either new or existing: Formating I am not so good at formatting myself, I thought best to leave it until last so I could get feedback on how it should look and help implementing it. Dependancy tree The dependancy tree is usually correct although I have noticed times where it doesnt detect all the dependancies that it should. I have only noticed this when there are circular dependancies so i think this might be the cause. It's not a big deal currently because makepkg -i installed repo deps for us which handles the repo deps for us and will get the correct ones. So yay might not list all the dependancies. but they will get installed so I consider this a visual bug. I have yet to see any circular dependancies in the AUR so I can not say what will happend but I#m guessing that it will break. Versioned packages/dependencies Targets and dependancies with version constriants such as 'linux>=4.1' will not be checked on the aur side of things but will be checked on the repo side. Ignorepkg/Ignoregroup Currently I do not handle this in any way but it shouldn't be too hard to implement. Conflict checking This is not currently implemented either Split Paclages Split packages are not Handles properly. If we only specify one package so install from a split package makepkg -i ends up installing them all anyway. If we specify more than one (n) package it will actually build the package base n times and reinstall every split package n times. Makepkg To get things working I decided to keep using the makepkg -i method. I plan to eventually replace this with a pacman -U based method. This should allow passing args such as --dbpath and --config to aur packages aswell as help solve some problems such as the split packages. Clean build I plan to improve the clean build choice to be a little more smart and instead of check if the directory exists, check if the package is already build and if so skip the build all together.
2018-01-17 21:48:23 +00:00
dt.ToProcess = nextProcess
depTreeRecursive(dt, localDb, syncDb, true)
return
}