We have an optimization to skip composition if there's no damage on the
primary plane and we already have a renderer buffer active. But we don't
allow this optimization if there's a pending capture task for the
output. For the renderer-based sources, that is really necessary, but
for the writeback source we should allow this optimization.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
When doing plane selection for an output CRTC check if the plane
already has a CRTC attached and if so prefer that plane only for
the corresponding CRTC.
This prevents changing a CRTC's primary plane when it is active
which is not allowed by the DRM framework.
Based-on-patch-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
We map view alpha(0.0-1.0) to plane state's alpha
by using the max plane alpha value got from drm.
Signed-off-by: Hsuan-Yu Lin <hlin@jp.adit-jv.com>
Signed-off-by: Veeresh Kadasani <external.vkadasani@jp.adit-jv.com>
Signed-off-by: Vinh Nguyen Trong <Vinh.NguyenTrong@vn.bosch.com>
This checks whether plane alpha is supported.
We get range of alpha value supported for plane
which is required for mapping view's alpha(0.0-1.0)
with drm plane alpha. No functional change.
Signed-off-by: Hsuan-Yu Lin <hlin@jp.adit-jv.com>
Signed-off-by: Veeresh Kadasani <external.vkadasani@jp.adit-jv.com>
Signed-off-by: Vinh Nguyen Trong <Vinh.NguyenTrong@vn.bosch.com>
We log the reasons why the fb of a certain view was not placed in an
overlay plane and use that for debug purposes. With these reasons we
also decide if the scanout tranche should be included on the dma-buf
feedback or not. For instance:
1. If the reason is the incompatibility between the format/modifier
pair of the fb and those supported by the KMS device, the scanout
tranche is added and feedback is re-sent (so that the client can
re-allocate with parameters that makes it eligible for direct
scanout).
2. If the reason is because we have no overlay planes available, the
scanout tranche is useless. So the scanout tranche is removed and
the feedback re-sent (so that clients can re-allocate with
parameters optimal for the render device).
Also, when we detect that a view is eligible for direct scanout, we
don't even consider sending new feedback, as our interpretation of the
dma-buf feedback spec was that we should avoid bothering clients with
new feedback when they are already hitting direct scanout.
After some discussions and clarifications regarding the spec, we've
realized that Weston should start to also include the scanout tranche
even when the compositor is able to place client's content on overlay
planes. Basically, because this gives a chance for clients to
re-allocate with the proper parameters (not only format/modifier pair,
but also the target_device and the flags) from the scanout tranche. In
this patch we start doing this.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
It makes no sense to keep the scanout tranche on the dma-buf feedback if
there are no overlay planes available. So start to remove it.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In commit "drm-backend: add writeback connector screenshooter to
DRM-backend" we were failing the writeback screenshot when the DRM/KMS
driver would take longer than the atomic commit to finish. In this patch
we address such case.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In this patch, we add the writeback connector screenshooter to the
DRM-backend.
This will be useful to create plane composition tests that will run in
our CI, as VKMS already supports writeback connectors.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
With this change, we expose the DRM-backend writeback source through the
output capture interface, making it available to clients.
For now we'll always fail writeback screenshots requests, because we
still don't have the writeback screenshooter implementation on the
DRM-backend. We add that in the following commits.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In the following commits we add a writeback screenshooter. For that,
we'll need the formats supported by the writeback connectors. So include
the supported formats in struct drm_writeback.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The state does not own the fd. This is usually not a problem, because the
in_fence_fd of the state is assigned during drm_assign_planes() and then
immediately used in drm_repaint_flush(). It cannot be closed in-between.
However, in the fallback path in drm_output_start_repaint_loop(), the state is
duplicated. At this point in time, the in_fence_fd may be invalid because it was
replaced in a new commit of the corresponding surface.
The plane state was already committed to the kernel when it is copied, so the
fence is no longer needed. So just clear it.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
With multiple DRM devices, the state for one device may be empty during
repaint_flush(). This can happen for example if an output of one device triggers
the repaint and there are no screens attached to the other device and therefore
no active outputs.
The atomic commit will actually fail because the commit contains the
DRM_MODE_PAGE_FLIP_EVENT flag but no CRTCs.
Avoid this by skipping the commit entirly. There is nothing to to anyways.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Add the --additional-devices parameter to Weston to add secondary drm devices
that will only be used as outputs, but not for rendering.
We can only fail the repaint for the entire backend, but not for single
devices. Thus, if one of the devices fail, we have to fail the repaint for the
entire backend.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Additional devices don't have a gbm device. Therefore, we cannot create gbm bos
for the cursor.
If the output device differs from the gbm device, fall back to the allocation of
a dumb buffer for the cursor on the output device. Update the cursor sprite with
a memcpy to the already mapped dumb buffer that belongs to the current cursor.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
If the GBM bo was allocated on a different device than the device that is used
for the fb, we have to import the fd first and update the handle.
Use drmPrimeFDToHandle directly instead of using a gbm device for the scanout
device, since a gbm device would require a gbm implementation, which is often
not available for devices that only support scanout.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
If we are using multiple GPUs and are not able to use modifiers to ensure that
the formats are compatible, we have to use linear buffers for the transfer.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Weston uses a cached drm_fb when a view is shown multiple times. If the view is
shown on multiple outputs backed by different DRM devices, Weston returns the
cached drm_fb for the first device that was used for the import. This causes a
failure when adding the fb to the other device.
Use a list of all drm_fbs to cache the buf_fb per device, and check for the
device before reusing a drm_fb.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The faked z position must be created for each device. Therefore, the device
itself must be passed to the function. If only the backend is passed, the faked
z position would be only created for the primary device.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
This is needed by drm_output_fini_egl() to be able to retrieve the
backend out of the drm_output on the shutdown path of the compositor.
Both the remoting plug-in and the pipewire plug-in are users of the
drm-virtual API and as such they would trigger a crash when shutting
down the compositor, as we're not setting up any backend whatsoever.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Convert the bare x,y coordinates into struct weston_coord and update all
users.
We keep the surface position in wl_fixed_t for now so it still exactly
matches the position most recently sent to clients.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Starting with commit 4cde507be6 "backend-drm: fix plane sorting" the
plane list will have a descending order of the planes rather than ascending.
This reversed order had the side-effect of exposing the fact that we
don't set-up a plane index when creating the drm_plane using the DRM
virtual API. Without settting a plane index for that drm_plane we
effectively overwrite the plane index which has the 0 (zero) entry.
This wasn't an issue before commit 4cde507be6 "backend-drm: fix
plane sorting" as it seems we never picked up that plane index as
being a suitable one due to the fact that those were assigned to primary
planes, but after that commit, the cursor plane will be one getting
the 0 (zero) plane index.
Finally, this would trip over because we attempt to place a (cursor)
view on a primary plane (where it would've normally be a cursor
plane) and we end up with no framebuffer ref.
This is fixed trivially by assigning a plane index, different than the
ones already created by create_spirtes().
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Search for planes that support the rotation required to properly display
a paint node, and properly set coordinates and rotation properties.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
For now we just always set the plane up to have a "normal" rotation, so
no new features are added with this commit.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
From our perspective, a bitmask is pretty much the same as an enum, so
allow it to use the same path.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We can clear this via drm_plane_state_put_back() at the end of
drm_output_propose_state(). We need to set it back to the minimum zpos
when rendering.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Update users of the old coordinate space conversion functions that take
x, y pairs to the new weston_coord versions.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Clean up the code a little by dropping the now unnecessary switch case
in drm_output_init_pixman(). As a side effect, this enables all formats
that have a pixman_format entry in the pixel format table:
- rgb565
- xrgb8888
- argb8888
- xbgr8888
- abgr8888
- rgbx8888
- rgba8888
- bgrx8888
- bgra8888
- xrgb2101010
- argb2101010
- xbgr2101010
- abgr2101010
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use const struct pixel_format_info *format instead of uint32_t
gbm_format for backend and output pixel format.
Since create_gbm_surface() is never called without output->format being
set, drop the unnecessary error message.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use struct pixel_format_info pointers instead of uint32_t drm fourcc
values at the API surface for output and image creation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use struct pixel_format_info pointers instead of pixman_format_code_t
values at the API surface for output and image creation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add weston_renderbuffer_ref/unref() functions and use them to
eventually destroy the weston_renderbuffer. Drop the explicit
renderbuffer_destroy vfunc from the pixman renderer interface.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Stop calling pixman_renderer_init() from backends directly.
Call it via weston_compositor_init_renderer() instead.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a damage region to struct weston_renderbuffer and use it to replace
the previous_damage tracking in the drm backend.
Keep renderbuffers on a list in struct pixman_output_state and use it
to accumulate damage on all renderbuffers during repaint_output.
Now renderbuffers have to be created when pixman output state already
exists.
Reorder renderer output state and renderbuffer creation accordingly.
With this, pixman_renderer_output_set_hw_extra_damage() can be removed.
This can not yet replace the external damage tracking in the VNC
backend, which needsto know the accumulated damage that is not returned
from repaint_output.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add a struct weston_renderbuffer parameter to repaint_output and make
backends set the pixman image renderbuffer through this parameter
instead of using pixman_renderer_output_set_buffer()
Turn pixman_renderer_output_set_buffer() static.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add a create_image_from_ptr vfunc to struct pixman_renderer_interface,
which wraps weston_renderbuffer creation for the pixman renderer via
pixman_image_create_bits(), as well as a renderbuffer_destroy vfunc
to dispose of the pixman image renderbuffer.
Also add create_image_no_clear using pixman_image_create_bits_no_clear()
instead.
Make the backends create and destroy their pixman image renderbuffers
through this interface.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add a struct pixman_renderer_interface with output_create and
output_destroy vfuncs and store a pointer to it in struct
weston_renderer.
Make all backends access the pixman_renderer_output_create/destroy
functions through this interface and turn them static.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Move the struct gl_renderer_interface pointer from the backends into
the weston_renderer structure. The interface struct only contains
function pointers that never change, so make it const.
Load and initialize the GL renderer in libweston instead of in the
backends, using the new weston_compositor_init_renderer() function.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We can save a bit of work by using the output_to_buffer_matrix we've
already calculated for the paint node to transform the destination
rectangle, instead of starting over from global regions and doing
individual steps.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We should never hit this because drm_view_transform_supported() filters
out any transforms where it would occur.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
To avoid retrieving the backend from the compositor all the time, store
a pointer to the drm backend on its drm_output structures.
This will be useful once the compositor contains more than one backend.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Passing the backend as a parameter to the weston_backend function
pointers seems more natural and will be very useful once there can be
more than one backend.
Since all backends already store a pointer to the compositor instance,
replace the compositor parameter with the backend in all functions.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
