Similar to changes in simple-dmabuf-egl, this perform a x-axis
reflection as it has the same NDC values as simple-dmabuf-egl and we get
an inverted image. We do it straight in the shader this time.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The motivations for this are:
- Y_INVERT is not used by most real-world clients.
weston-simple-dmabuf-egl and weston-simple-dmabuf-v4l are one only
known users. Thus this creates a special case just for these demo
clients.
- Some compositors (wlroots) have dropped support for DMA-BUF flags,
so the client no longer runs there.
- Dropping the flag allows compositors to use a KMS hardware plane to
display the buffer.
It keeps the same axis orientation we had in place where we had the
y-invert flag enabled by default, by doing a reflection about x-axis.
Signed-off-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Closes: https://gitlab.freedesktop.org/wayland/weston/-/issues/675
As a realistic scenario used by clients.
The motivation is to have an easy way to test correct fullscreen
behavior of compositors, as they have to compensate for the smaller
buffer size by adding black bars.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
We have no guarantee that we can create a surface for the pointer at the
instant we receive a seat that will (probably eventually) need one.
Hold off until we receive an enter event before creating this - at that
point we know with certainty that wl_compositor is available, since we've
used it to create the surface that was entered.
Fixes#659
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
With commit 62ab6891db, 'clients/simple-egl: Handle buffer
scale and transform' we changed the way we resized the client, by
encapsulating the resize in update_buffer_geometry() function.
we didn't correct that when creating the EGL window, which might be
problematic if you attempt to start the window with different a
different state, like maximized.
Fixes 62ab6891db
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
If weston-simple-egl is run with the "-b" flag, it will attempt to set
the swap interval to 0 during create_surface. However, at that point, it
will not have made its EGLContext current yet, causing the
eglSwapInterval call to have no effect. To fix this, wait until the
EGLContext has been made current in init_gl before updating the swap
interval.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
We want atomic hotspot updates - this can't happen with
wl_pointer_set_cursor. So if we have a surface that already has a cursor
role, just update the hotspot when attaching new content.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This reverts commit 992ee045f1.
Recreating the surface for every cursor change causes flickering
cursors on some compositors, and is not the best way to achieve
atomic cursor updates
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This reverts commit f079f43658.
This only partially fixed a problem introduced in
992ee045f1
I'm reverting that commit in favor of a different fix, so this
broken fix needs to go first.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
It seems we've missed an update from 3 to 4 (bounds events). With it,
this updates to version 5 which sends the capabilities event. Stubs, as
we're not using them.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This file relied on shared/xalloc.h to include <libweston/zalloc.h>.
That would be a problem if xalloc.h stopped doing that.
Just use xzalloc().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Recently I learnt that fprintf() is not async-signal-safe. Maybe it also
attempts to allocate memory sometimes. Hence, using it when we
presumably are out of memory is wishful thinking.
Therefore replace that with async-signal-safe code. If you have to check
pointers from traditional signal handlers, now you could do that too!
While doing this, we also lose the string formatting for line number. I
would argue that printing file and line number is not that useful, if
the system really is out of memory. If not out of memory, a core dump
would give us much more detailed information about what went wrong.
clients/window.c had some calls to fail_on_null() and these are simply
replaced. They were used for checking that creating new wl_proxy by
issuing a protocol request worked, and IIRC that only fails on
out-of-memory, so the same rationale applies here.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Rather than open-coding our own implementation of parsing a string to
construct an envp and an argp, just use custom_env's implementation.
Signed-off-by: Daniel Stone <daniels@collabora.com>
It was binding to any advertised version, but it can't actually work
with version 4 (because it doesn't handle the new configure_bounds
event).
Other sample clients in the tree are hard-coding version 1, so do the
same here.
Fixes: 6d9fda7156 ("clients/presentation-shm: use xdg_shell instead of wl_shell")
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Pango, Cairo, and fontconfig, all want to leave thread-global data
hanging around in order to maintain a cache. Try to clean up as much of
it as we possibly can on exit, apart from the Pango language string
which appears to be unfreeable, so has been added to LSan suppressions.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This code was all dead, since neither cairo-glesv2 nor the sample nested
compositor ever made it to the Meson build.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Instead of closing the window directly by calling close_handler() use a
deferred task to do that instead.
That way we avoid a potential invalid access on a link which was
previously removed, due to the fact both window_destroy() and
touch_handle_up() traverse the same list.
This is an alternative to 841.
Fixes: #607.
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reported-by: He Yong <hyyoxhk@163.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Commit 62ab6891db intended to change the angle calculation
so that the a time delta since the first frame would be used
instead of the absolute time. That was done in order to ensure
the angle would always start with the same value, allowing users
to differentiate left and right, which again is needed when
testing flipped transforms.
However, the `benchmark_time` variable is unsuitable for that
purpose as it gets reset on each benchmark interval, abruptly
changing the angle.
Thus introduce a dedicated variable.
Fixes 62ab6891db
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Buffer scale is common enough in the modern desktop space to
expect average GL clients to handle it. Thus lets include it into
our main example client.
While on it, also handle buffer transforms. It's essentially free
for GL clients in terms of computing power but may increase the
chance that Wayland compositors are able to hit scanout fast paths.
Thus having an example client for it is likely valueabel for client
and compositor developers.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Setting the opaque region correctly is common source of error for
clients that simply want to express that a whole surface is opaque.
This is especially true once buffer_scale and buffer_transform come
into play, as unlike for damage, where buffer_damage is the
encouraged and user friendly way today, opaque regions are always
in logical coordinates.
As faulty opaque regions don't have a visual impact in these cases
but only increase resource consumption, these errors often remain
for long times. See
1e2bc68171
for one of many examples.
Give an easy example how to set the opaque region in a conformant
and reliable way.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
It is used in Mesa. Lets switch to it as well in order to provide
good examples and encourage proper API usage.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Compositors may choose to send multiple scanout or non-scanout
tranches. So instead of assuming that the first respective tranche
contains the format/modifier we're looking for, check all tranches.
While on it, make sure that in case a compositor sends scanout
tranches on the initial feedback, `pick_format_from_scanout_tranche()`
does not unintentionally pick `INITIAL_BUFFER_FORMAT`.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
It doesn't and can't build, because it depends on cairo-gl. We already
have simple-egl which shows how to use EGL/GLESv2 on Wayland.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Weston uses a timeout of 2 seconds before it sends scanout
tranches to clients in order to not trigger excessive buffer
reallocations in clients.
`simple-dmabuf-feedback` in turn counts redraws (200) before
exiting. That doesn't work on e.g. 144Hz screens, thus use a
timer here as well.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
- Use more consistent style, e.g. the tree structure uses
the same indentation level throughout
- Swap format name and code for consistency with modifiers
- Use constants for ASCII art (taken from drm_info)
Signed-off-by: Simon Ser <contact@emersion.fr>
Rather than setting the fullscreen/maximized before initial
wl_surface.commit, make it part of the initial window state.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Rather than creating the wl_egl_window at the same time as wl_surface,
do it after we get the first configure event.
With it, we also defer eglMakeCurrent() as according to the spec, the
first time a OpenGL or OpenGL ES context is made current, the viewport
and scissor dimensions are set to the size of the draw surface.
This is particulary important when attempting to start simple-egl either
as fullscreen or as maximized, as not doing so will either incorrectly
commit a buffer with the original dimensions, and later on to resize to
the correct dimensions (which is the case for fullscreen), or it will
terminate the wayland connection abruptly due to xdg-shell protocol
violation, with a mismatch for the client's geometry (the case for
maximized).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
display->wm_base is checked right after handling registry object, and
with it the globals, so there's no to perform and additional check for
xwm_base.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Just like start as fullscreen, let us add a start as maximized as well.
It tests out the maximized state and with clients geometry checks.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Print a message when presentation switches to/from zero-copy mode.
This makes it easier to understand whether the compositor DMA-BUF
feedback was effective.
Signed-off-by: Simon Ser <contact@emersion.fr>
This fixes an issue when running simple-dmabuf-feedback:
"wl_display@1: error 1: invalid arguments for wl_surface@3.attach".
As we are not using create_immed request from zwp_linux_dmabuf_v1, we
can't start to use a dma-buf buffer before we process compositor's event
telling us that the creation succeeded.
This was causing problems in the following scenario:
1. buffer is marked to be recreated (because of dma-buf feedback);
2. in buffer_release() event, we destroy the buffer and recreate it;
3. after we recreate it, roundtrip is not called, as we don't want to
block during the drawing loop;
4. buffer status is not being properly tracked, so we are trying to
use a buffer before receiving the event from the compositor telling
us that the creation succeeded.
To fix this, this patch improves buffer status tracking. Now we only
pick a buffer in the drawing loop when it is available. Also, if we have
no buffers available we perform a roundtrip and try again, as we may
have recreated all of them but still didn't have the chance to process
compositor's events telling us that creation succeeded.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Using `pixel_format_get_info()` can result in formats being
reported as `UNKNOWN` when used on compositors other than Weston.
As `weston-simple-dmabuf-feedback` somewhat succeeds `wayland-info`
as tool for `zwp_linux_dmabuf_v1` debugging from version 4 on, copy
the approach from the later for these cases.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
In certain situations these clients crash a lot due to the low
buffer limit. Four buffers is also what EGL allows without blocking
and what is arguably the upper limit of what a compositor should
demand.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Users should rely on wayland-info from wayland-utils [1] instead.
We've been printing a deprecation since 85382d394a ("clients:
deprecate weston-info"), so users should be aware already.
[1]: https://gitlab.freedesktop.org/wayland/wayland-utils/
Signed-off-by: Simon Ser <contact@emersion.fr>
It's invalid for a client to pass the compositor's supported version
directly to wl_registry_bind. For instance, under wlroots the client
will bind to wl_output version 4 and crash because it doesn't handle
the new "name" event.
Signed-off-by: Simon Ser <contact@emersion.fr>
Adds appid for all clients using the toolkit, flower, fullscreen, image,
resizor, scaler, smoke, stacking, subsurfaces, terminal,
touch-calibrator, transformed, etc.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Since commit 992ee045f1 we create a new surface when we update the cursor
image. This broke animated cursors by discarding any existing frame
callback used for timing, and moving the setup for frame callbacks to
after the commit on the pointer surface.
To fix this we need another surface commit for the frame callbacks, but
this alone is not enough to fix the regression, as a lingering kludge
intended to fix problems when reusing the pointer surface is no longer
working as intended.
Since we no longer re-use the same surface, we can delete the old surface
on pointer exit, along with any callbacks set on it. Then a frame callback
will be recreated naturally. This lets us remove the now broken kludge
from the past and restore animated cursor functionality.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
As mesa includes gbm_bo_get_fd_for_plane() from 21.1.0 version onwards,
build the dma-buf feedback client only after that. This should provide
some sanity for package maintainers, as this would need pulling a
rather newer mesa version to build it (which might not be available).
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
When setting the window as opaque or fullscreen (which creates an opaque
region) make it so we don't have any alpha pixels set.
This was mistakenly dropped from a previous patch series update to
simple-egl.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This avoids some unwarranted errors about conditional jumps or
invalid access from ASan as malloc doesn't set the memory to zero.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
