systemd/man/sd_notify.xml

620 lines
32 KiB
XML

<?xml version='1.0'?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
<!-- SPDX-License-Identifier: LGPL-2.1-or-later -->
<refentry id="sd_notify"
xmlns:xi="http://www.w3.org/2001/XInclude">
<refentryinfo>
<title>sd_notify</title>
<productname>systemd</productname>
</refentryinfo>
<refmeta>
<refentrytitle>sd_notify</refentrytitle>
<manvolnum>3</manvolnum>
</refmeta>
<refnamediv>
<refname>sd_notify</refname>
<refname>sd_notifyf</refname>
<refname>sd_pid_notify</refname>
<refname>sd_pid_notifyf</refname>
<refname>sd_pid_notify_with_fds</refname>
<refname>sd_pid_notifyf_with_fds</refname>
<refname>sd_notify_barrier</refname>
<refname>sd_pid_notify_barrier</refname>
<refpurpose>Notify service manager about start-up completion and other service status changes</refpurpose>
</refnamediv>
<refsynopsisdiv>
<funcsynopsis>
<funcsynopsisinfo>#include &lt;systemd/sd-daemon.h&gt;</funcsynopsisinfo>
<funcprototype>
<funcdef>int <function>sd_notify</function></funcdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const char *<parameter>state</parameter></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_notifyf</function></funcdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const char *<parameter>format</parameter></paramdef>
<paramdef></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_pid_notify</function></funcdef>
<paramdef>pid_t <parameter>pid</parameter></paramdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const char *<parameter>state</parameter></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_pid_notifyf</function></funcdef>
<paramdef>pid_t <parameter>pid</parameter></paramdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const char *<parameter>format</parameter></paramdef>
<paramdef></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_pid_notify_with_fds</function></funcdef>
<paramdef>pid_t <parameter>pid</parameter></paramdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const char *<parameter>state</parameter></paramdef>
<paramdef>const int *<parameter>fds</parameter></paramdef>
<paramdef>unsigned <parameter>n_fds</parameter></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_pid_notifyf_with_fds</function></funcdef>
<paramdef>pid_t <parameter>pid</parameter></paramdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const int *<parameter>fds</parameter></paramdef>
<paramdef>size_t <parameter>n_fds</parameter></paramdef>
<paramdef>const char *<parameter>format</parameter></paramdef>
<paramdef></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_notify_barrier</function></funcdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>uint64_t <parameter>timeout</parameter></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_pid_notify_barrier</function></funcdef>
<paramdef>pid_t <parameter>pid</parameter></paramdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>uint64_t <parameter>timeout</parameter></paramdef>
</funcprototype>
</funcsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para><function>sd_notify()</function> may be called by a service to notify the service manager about
state changes. It can be used to send arbitrary information, encoded in an environment-block-like string.
Most importantly, it can be used for start-up or reload completion notifications.</para>
<para>If the <parameter>unset_environment</parameter> parameter is non-zero,
<function>sd_notify()</function> will unset the <varname>$NOTIFY_SOCKET</varname> environment variable
before returning (regardless of whether the function call itself succeeded or not). Further calls to
<function>sd_notify()</function> will then silently do nothing, and the variable is no longer inherited
by child processes.</para>
<para>The <parameter>state</parameter> parameter should contain a newline-separated list of variable
assignments, similar in style to an environment block. A trailing newline is implied if none is
specified. The string may contain any kind of variable assignments, but see the next section
for a list of assignments understood by the service manager.</para>
<para>Note that systemd will accept status data sent from a service only if the
<varname>NotifyAccess=</varname> option is correctly set in the service definition file. See
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
details.</para>
<para>Note that <function>sd_notify()</function> notifications may be attributed to units correctly only
if either the sending process is still around at the time PID 1 processes the message, or if the sending
process is explicitly runtime-tracked by the service manager. The latter is the case if the service
manager originally forked off the process, i.e. on all processes that match
<varname>NotifyAccess=</varname><option>main</option> or
<varname>NotifyAccess=</varname><option>exec</option>. Conversely, if an auxiliary process of the unit
sends an <function>sd_notify()</function> message and immediately exits, the service manager might not be
able to properly attribute the message to the unit, and thus will ignore it, even if
<varname>NotifyAccess=</varname><option>all</option> is set for it.</para>
<para>Hence, to eliminate all race conditions involving lookup of the client's unit and attribution of
notifications to units correctly, <function>sd_notify_barrier()</function> may be used. This call acts as
a synchronization point and ensures all notifications sent before this call have been picked up by the
service manager when it returns successfully. Use of <function>sd_notify_barrier()</function> is needed
for clients which are not invoked by the service manager, otherwise this synchronization mechanism is
unnecessary for attribution of notifications to the unit.</para>
<para><function>sd_notifyf()</function> is similar to <function>sd_notify()</function> but takes a
<function>printf()</function>-like format string plus arguments.</para>
<para><function>sd_pid_notify()</function> and <function>sd_pid_notifyf()</function> are similar to
<function>sd_notify()</function> and <function>sd_notifyf()</function> but take a process ID (PID) to use
as originating PID for the message as first argument. This is useful to send notification messages on
behalf of other processes, provided the appropriate privileges are available. If the PID argument is
specified as 0, the process ID of the calling process is used, in which case the calls are fully
equivalent to <function>sd_notify()</function> and <function>sd_notifyf()</function>.</para>
<para><function>sd_pid_notify_with_fds()</function> is similar to <function>sd_pid_notify()</function>
but takes an additional array of file descriptors. These file descriptors are sent along the notification
message to the service manager. This is particularly useful for sending <literal>FDSTORE=1</literal>
messages, as described above. The additional arguments are a pointer to the file descriptor array plus
the number of file descriptors in the array. If the number of file descriptors is passed as 0, the call
is fully equivalent to <function>sd_pid_notify()</function>, i.e. no file descriptors are passed. Note
that file descriptors sent to the service manager on a message without <literal>FDSTORE=1</literal> are
immediately closed on reception.</para>
<para><function>sd_pid_notifyf_with_fds()</function> is a combination of
<function>sd_pid_notify_with_fds()</function> and <function>sd_notifyf()</function>, i.e. it accepts both
a PID and a set of file descriptors as input, and processes a format string to generate the state
string.</para>
<para><function>sd_notify_barrier()</function> allows the caller to synchronize against reception of
previously sent notification messages and uses the <varname>BARRIER=1</varname> command. It takes a
relative <varname>timeout</varname> value in microseconds which is passed to
<citerefentry><refentrytitle>ppoll</refentrytitle><manvolnum>2</manvolnum>
</citerefentry>. A value of UINT64_MAX is interpreted as infinite timeout.</para>
<para><function>sd_pid_notify_barrier()</function> is just like <function>sd_notify_barrier()</function>,
but allows specifying the originating PID for the notification message.</para>
</refsect1>
<refsect1>
<title>Well-known assignments</title>
<para>The following assignments have a defined meaning:</para>
<variablelist>
<varlistentry>
<term>READY=1</term>
<listitem><para>Tells the service manager that service startup is finished, or the service finished
re-loading its configuration. This is only used by systemd if the service definition file has
<varname>Type=notify</varname> or <varname>Type=notify-reload</varname> set. Since there is little
value in signaling non-readiness, the only value services should send is <literal>READY=1</literal>
(i.e. <literal>READY=0</literal> is not defined).</para></listitem>
</varlistentry>
<varlistentry>
<term>RELOADING=1</term>
<listitem><para>Tells the service manager that the service is beginning to reload its configuration.
This is useful to allow the service manager to track the service's internal state, and present it to
the user. Note that a service that sends this notification must also send a
<literal>READY=1</literal> notification when it completed reloading its configuration. Reloads the
service manager is notified about with this mechanisms are propagated in the same way as they are
when originally initiated through the service manager. This message is particularly relevant for
<varname>Type=notify-reload</varname> services, to inform the service manager that the request to
reload the service has been received and is now being processed.</para>
<xi:include href="version-info.xml" xpointer="v217"/></listitem>
</varlistentry>
<varlistentry>
<term>STOPPING=1</term>
<listitem><para>Tells the service manager that the service is beginning its shutdown. This is useful
to allow the service manager to track the service's internal state, and present it to the user.
</para>
<xi:include href="version-info.xml" xpointer="v217"/></listitem>
</varlistentry>
<varlistentry>
<term>MONOTONIC_USEC=…</term>
<listitem><para>A field carrying the monotonic timestamp (as per
<constant>CLOCK_MONOTONIC</constant>) formatted in decimal in μs, when the notification message was
generated by the client. This is typically used in combination with <literal>RELOADING=1</literal>,
to allow the service manager to properly synchronize reload cycles. See
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details, specifically <literal>Type=notify-reload</literal>.</para>
<xi:include href="version-info.xml" xpointer="v253"/></listitem>
</varlistentry>
<varlistentry>
<term>STATUS=…</term>
<listitem><para>Passes a single-line UTF-8 status string back to the service manager that describes
the service state. This is free-form and can be used for various purposes: general state feedback,
fsck-like programs could pass completion percentages and failing programs could pass a human-readable
error message. Example: <literal>STATUS=Completed 66% of file system check…</literal></para>
<xi:include href="version-info.xml" xpointer="v233"/></listitem>
</varlistentry>
<varlistentry>
<term>NOTIFYACCESS=…</term>
<listitem><para>Reset the access to the service status notification socket during runtime, overriding
<varname>NotifyAccess=</varname> setting in the service unit file. See
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details, specifically <literal>NotifyAccess=</literal> for a list of accepted values.
</para>
<xi:include href="version-info.xml" xpointer="v254"/></listitem>
</varlistentry>
<varlistentry>
<term>ERRNO=…</term>
<listitem><para>If a service fails, the errno-style error code, formatted as string. Example:
<literal>ERRNO=2</literal> for ENOENT.</para>
<xi:include href="version-info.xml" xpointer="v233"/></listitem>
</varlistentry>
<varlistentry>
<term>BUSERROR=…</term>
<listitem><para>If a service fails, the D-Bus error-style error code. Example:
<literal>BUSERROR=org.freedesktop.DBus.Error.TimedOut</literal>.</para>
<xi:include href="version-info.xml" xpointer="v233"/></listitem>
</varlistentry>
<varlistentry>
<term>VARLINKERROR=…</term>
<listitem><para>If a service fails, the Varlink error-style error code. Example:
<literal>VARLINKERROR=org.varlink.service.InvalidParameter</literal>.</para>
<xi:include href="version-info.xml" xpointer="v257"/></listitem>
</varlistentry>
<varlistentry>
<term>EXIT_STATUS=…</term>
<listitem><para>The exit status of a service or the manager itself. Note that
<command>systemd</command> currently does not consume this value when sent by services, so this
assignment is only informational. The manager will send this notification to <emphasis>its</emphasis>
notification socket, which may be used to collect an exit status from the system (a container or
VM) as it shuts down. For example,
<citerefentry project='debian'><refentrytitle>mkosi</refentrytitle><manvolnum>1</manvolnum></citerefentry>
makes use of this. The value to return may be set via the
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
<command>exit</command> verb.</para>
<xi:include href="version-info.xml" xpointer="v254"/></listitem>
</varlistentry>
<varlistentry>
<term>MAINPID=…</term>
<listitem><para>The main process ID (PID) of the service, in case the service manager did not fork
off the process itself. Example: <literal>MAINPID=4711</literal>.</para>
<xi:include href="version-info.xml" xpointer="v233"/></listitem>
</varlistentry>
<varlistentry>
<term>WATCHDOG=1</term>
<listitem><para>Tells the service manager to update the watchdog timestamp. This is the keep-alive
ping that services need to issue in regular intervals if <varname>WatchdogSec=</varname> is enabled
for it. See
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for information how to enable this functionality and
<citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>
for the details of how the service can check whether the watchdog is enabled. </para></listitem>
</varlistentry>
<varlistentry>
<term>WATCHDOG=trigger</term>
<listitem><para>Tells the service manager that the service detected an internal error that should be
handled by the configured watchdog options. This will trigger the same behaviour as if
<varname>WatchdogSec=</varname> is enabled and the service did not send <literal>WATCHDOG=1</literal>
in time. Note that <varname>WatchdogSec=</varname> does not need to be enabled for
<literal>WATCHDOG=trigger</literal> to trigger the watchdog action. See
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for information about the watchdog behavior. </para>
<xi:include href="version-info.xml" xpointer="v243"/></listitem>
</varlistentry>
<varlistentry>
<term>WATCHDOG_USEC=…</term>
<listitem><para>Reset <varname>watchdog_usec</varname> value during runtime. Notice that this is not
available when using <function>sd_event_set_watchdog()</function> or
<function>sd_watchdog_enabled()</function>. Example :
<literal>WATCHDOG_USEC=20000000</literal></para>
<xi:include href="version-info.xml" xpointer="v233"/></listitem>
</varlistentry>
<varlistentry>
<term>EXTEND_TIMEOUT_USEC=…</term>
<listitem><para>Tells the service manager to extend the startup, runtime or shutdown service timeout
corresponding the current state. The value specified is a time in microseconds during which the
service must send a new message. A service timeout will occur if the message isn't received, but only
if the runtime of the current state is beyond the original maximum times of
<varname>TimeoutStartSec=</varname>, <varname>RuntimeMaxSec=</varname>, and
<varname>TimeoutStopSec=</varname>. See
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for effects on the service timeouts.</para>
<xi:include href="version-info.xml" xpointer="v236"/></listitem>
</varlistentry>
<varlistentry>
<term>FDSTORE=1</term>
<listitem><para>Store file descriptors in the service manager. File descriptors sent this way will be
held for the service by the service manager and will later be handed back using the usual file
descriptor passing logic at the next start or restart of the service, see
<citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
Any open sockets and other file descriptors which should not be closed during a restart may be stored
this way. When a service is stopped, its file descriptor store is discarded and all file descriptors
in it are closed, except when overridden with <varname>FileDescriptorStorePreserve=</varname>, see
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
<para>The service manager will accept messages for a service only if its
<varname>FileDescriptorStoreMax=</varname> setting is non-zero (defaults to zero, see
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
The service manager will set the <varname>$FDSTORE</varname> environment variable for services that
have the file descriptor store enabled, see
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
<para>If <varname>FDPOLL=0</varname> is not set and the file descriptors are pollable (see
<citerefentry><refentrytitle>epoll_ctl</refentrytitle><manvolnum>2</manvolnum></citerefentry>), then
any <constant>EPOLLHUP</constant> or <constant>EPOLLERR</constant> event seen on them will result in
their automatic removal from the store.</para>
<para>Multiple sets of file descriptors may be sent in separate messages, in which case the sets are
combined. The service manager removes duplicate file descriptors (those pointing to the same object)
before passing them to the service.</para>
<para>This functionality should be used to implement services that can restart after an explicit
request or a crash without losing state. Application state can either be serialized to a file in
<filename>/run/</filename>, or better, stored in a
<citerefentry><refentrytitle>memfd_create</refentrytitle><manvolnum>2</manvolnum></citerefentry>
memory file descriptor. Use <function>sd_pid_notify_with_fds()</function> to send messages with
<literal>FDSTORE=1</literal>. It is recommended to combine <varname>FDSTORE=</varname> with
<varname>FDNAME=</varname> to make it easier to manage the stored file descriptors.</para>
<para>For further information on the file descriptor store see the <ulink
url="https://systemd.io/FILE_DESCRIPTOR_STORE">File Descriptor Store</ulink> overview.</para>
<xi:include href="version-info.xml" xpointer="v219"/></listitem>
</varlistentry>
<varlistentry>
<term>FDSTOREREMOVE=1</term>
<listitem><para>Removes file descriptors from the file descriptor store. This field needs to be
combined with <varname>FDNAME=</varname> to specify the name of the file descriptors to
remove.</para>
<xi:include href="version-info.xml" xpointer="v236"/></listitem>
</varlistentry>
<varlistentry>
<term>FDNAME=…</term>
<listitem><para>When used in combination with <varname>FDSTORE=1</varname>, specifies a name for the
submitted file descriptors. When used with <varname>FDSTOREREMOVE=1</varname>, specifies the name for
the file descriptors to remove. This name is passed to the service during activation, and may be
queried using
<citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
File descriptors submitted without this field will be called <literal>stored</literal>.</para>
<para>The name may consist of arbitrary ASCII characters except control characters or
<literal>:</literal>. It may not be longer than 255 characters. If a submitted name does not follow
these restrictions, it is ignored.</para>
<para>Note that if multiple file descriptors are submitted in a single message, the specified name
will be used for all of them. In order to assign different names to submitted file descriptors,
submit them in separate messages.</para>
<xi:include href="version-info.xml" xpointer="v233"/></listitem>
</varlistentry>
<varlistentry>
<term>FDPOLL=0</term>
<listitem><para>When used in combination with <varname>FDSTORE=1</varname>, disables polling of the
submitted file descriptors regardless of whether or not they are pollable. As this option disables
automatic cleanup of the submitted file descriptors on EPOLLERR and EPOLLHUP, care must be taken to
ensure proper manual cleanup. Use of this option is not generally recommended except for when
automatic cleanup has unwanted behavior such as prematurely discarding file descriptors from the
store.</para>
<xi:include href="version-info.xml" xpointer="v246"/></listitem>
</varlistentry>
<varlistentry>
<term>BARRIER=1</term>
<listitem><para>Tells the service manager that the client is explicitly requesting synchronization by
means of closing the file descriptor sent with this command. The service manager guarantees that the
processing of a <varname>BARRIER=1</varname> command will only happen after all previous notification
messages sent before this command have been processed. Hence, this command accompanied with a single
file descriptor can be used to synchronize against reception of all previous status messages. Note
that this command cannot be mixed with other notifications, and has to be sent in a separate message
to the service manager, otherwise all assignments will be ignored. Note that sending 0 or more than 1
file descriptor with this command is a violation of the protocol.</para>
<xi:include href="version-info.xml" xpointer="v246"/></listitem>
</varlistentry>
</variablelist>
<para>The notification messages sent by services are interpreted by the service manager. Unknown
assignments are ignored. Thus, it is safe (but often without effect) to send assignments which are not
in this list. The protocol is extensible, but care should be taken to ensure private extensions are
recognizable as such. Specifically, it is recommend to prefix them with <literal>X_</literal> followed by
some namespace identifier. The service manager also sends some messages to <emphasis>its</emphasis>
notification socket, which may then consumed by a supervising machine or container manager further up the
stack. The service manager sends a number of extension fields, for example
<varname>X_SYSTEMD_UNIT_ACTIVE=</varname>, for details see
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para>
</refsect1>
<refsect1>
<title>Return Value</title>
<para>On failure, these calls return a negative errno-style error code. If
<varname>$NOTIFY_SOCKET</varname> was not set and hence no status message could be sent, 0 is
returned. If the status was sent, these functions return a positive value. In order to support both
service managers that implement this scheme and those which do not, it is generally recommended to ignore
the return value of this call. Note that the return value simply indicates whether the notification
message was enqueued properly, it does not reflect whether the message could be processed
successfully. Specifically, no error is returned when a file descriptor is attempted to be stored using
<varname>FDSTORE=1</varname> but the service is not actually configured to permit storing of file
descriptors (see above).</para>
</refsect1>
<refsect1>
<title>Notes</title>
<xi:include href="libsystemd-pkgconfig.xml" xpointer="pkgconfig-text"/>
<xi:include href="threads-aware.xml" xpointer="getenv"/>
<para>These functions send a single datagram with the state string as payload to the socket referenced in
the <varname>$NOTIFY_SOCKET</varname> environment variable. If the first character of
<varname>$NOTIFY_SOCKET</varname> is <literal>/</literal> or <literal>@</literal>, the string is
understood as an <constant>AF_UNIX</constant> or Linux abstract namespace socket (respectively), and in
both cases the datagram is accompanied by the process credentials of the sending service, using
SCM_CREDENTIALS. If the string starts with <literal>vsock:</literal> then the string is understood as an
<constant>AF_VSOCK</constant> address, which is useful for hypervisors/VMMs or other processes on the
host to receive a notification when a virtual machine has finished booting. Note that in case the
hypervisor does not support <constant>SOCK_DGRAM</constant> over <constant>AF_VSOCK</constant>,
<constant>SOCK_SEQPACKET</constant> will be used instead. <literal>vsock-stream</literal>,
<literal>vsock-dgram</literal> and <literal>vsock-seqpacket</literal> can be used instead of
<literal>vsock</literal> to force usage of the corresponding socket type. The address should be in the
form: <literal>vsock:CID:PORT</literal>. Note that unlike other uses of vsock, the CID is mandatory and
cannot be <literal>VMADDR_CID_ANY</literal>. Note that PID1 will send the VSOCK packets from a
privileged port (i.e.: lower than 1024), as an attempt to address concerns that unprivileged processes in
the guest might try to send malicious notifications to the host, driving it to make destructive decisions
based on them.</para>
<refsect2>
<title>Standalone Implementations</title>
<para>Note that, while using this library should be preferred in order to avoid code duplication, it is
also possible to reimplement the simple readiness notification protocol without external dependencies,
as demonstrated in the following self-contained examples from several languages:</para>
<refsect3>
<title>C</title>
<programlisting><xi:include href="notify-selfcontained-example.c" parse="text"/></programlisting>
</refsect3>
<refsect3>
<title>Python</title>
<programlisting><xi:include href="notify-selfcontained-example.py" parse="text"/></programlisting>
</refsect3>
</refsect2>
</refsect1>
<refsect1>
<title>Environment</title>
<variablelist class='environment-variables'>
<varlistentry>
<term><varname>$NOTIFY_SOCKET</varname></term>
<listitem><para>Set by the service manager for supervised processes for status and start-up
completion notification. This environment variable specifies the socket
<function>sd_notify()</function> talks to. See above for details.</para></listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Examples</title>
<example>
<title>Start-up Notification</title>
<para>When a service finished starting up, it might issue the following call to notify the service
manager:</para>
<programlisting>sd_notify(0, "READY=1");</programlisting>
</example>
<example>
<title>Extended Start-up Notification</title>
<para>A service could send the following after completing initialization:</para>
<programlisting>
sd_notifyf(0, "READY=1\n"
"STATUS=Processing requests…\n"
"MAINPID=%lu",
(unsigned long) getpid());</programlisting>
</example>
<example>
<title>Error Cause Notification</title>
<para>A service could send the following shortly before exiting, on failure:</para>
<programlisting>
sd_notifyf(0, "STATUS=Failed to start up: %s\n"
"ERRNO=%i",
strerror_r(errnum, (char[1024]){}, 1024),
errnum);</programlisting>
</example>
<example>
<title>Store a File Descriptor in the Service Manager</title>
<para>To store an open file descriptor in the service manager, in order to continue operation after a
service restart without losing state, use <literal>FDSTORE=1</literal>:</para>
<programlisting>sd_pid_notify_with_fds(0, 0, "FDSTORE=1\nFDNAME=foobar", &amp;fd, 1);</programlisting>
</example>
<example>
<title>Eliminating race conditions</title>
<para>When the client sending the notifications is not spawned by the service manager, it may exit too
quickly and the service manager may fail to attribute them correctly to the unit. To prevent such
races, use <function>sd_notify_barrier()</function> to synchronize against reception of all
notifications sent before this call is made.</para>
<programlisting>
sd_notify(0, "READY=1");
/* set timeout to 5 seconds */
sd_notify_barrier(0, 5 * 1000000);
</programlisting>
</example>
</refsect1>
<refsect1>
<title>History</title>
<para><function>sd_pid_notify()</function>,
<function>sd_pid_notifyf()</function>, and
<function>sd_pid_notify_with_fds()</function> were added in version 219.</para>
<para><function>sd_notify_barrier()</function> was added in version 246.</para>
<para><function>sd_pid_notifyf_with_fds()</function> and
<function>sd_pid_notify_barrier()</function> were added in version 254.</para>
</refsect1>
<refsect1>
<title>See Also</title>
<para><simplelist type="inline">
<member><citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry></member>
<member><citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry></member>
<member><citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry></member>
<member><citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry></member>
<member><citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry></member>
<member><citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry></member>
<member><citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry></member>
</simplelist></para>
</refsect1>
</refentry>