mirror of
https://github.com/systemd/systemd
synced 2024-10-06 16:21:34 +00:00
cc5549ca12
We had all kinds of indentation: 2 sp, 3 sp, 4 sp, 8 sp, and mixed. 4 sp was the most common, in particular the majority of scripts under test/ used that. Let's standarize on 4 sp, because many commandlines are long and there's a lot of nesting, and with 8sp indentation less stuff fits. 4 sp also seems to be the default indentation, so this will make it less likely that people will mess up if they don't load the editor config. (I think people often use vi, and vi has no support to load project-wide configuration automatically. We distribute a .vimrc file, but it is not loaded by default, and even the instructions in it seem to discourage its use for security reasons.) Also remove the few vim config lines that were left. We should either have them on all files, or none. Also remove some strange stuff like '#!/bin/env bash', yikes.
234 lines
6.9 KiB
Bash
Executable file
234 lines
6.9 KiB
Bash
Executable file
#!/bin/bash
|
|
|
|
# The official unmodified version of the script can be found at
|
|
# https://scan.coverity.com/scripts/travisci_build_coverity_scan.sh
|
|
|
|
set -e
|
|
|
|
# Declare build command
|
|
COVERITY_SCAN_BUILD_COMMAND="ninja -C cov-build"
|
|
|
|
# Environment check
|
|
# Use default values if not set
|
|
SCAN_URL=${SCAN_URL:="https://scan.coverity.com"}
|
|
TOOL_BASE=${TOOL_BASE:="/tmp/coverity-scan-analysis"}
|
|
UPLOAD_URL=${UPLOAD_URL:="https://scan.coverity.com/builds"}
|
|
|
|
# These must be set by environment
|
|
echo -e "\033[33;1mNote: COVERITY_SCAN_PROJECT_NAME and COVERITY_SCAN_TOKEN are available on Project Settings page on scan.coverity.com\033[0m"
|
|
[ -z "$COVERITY_SCAN_PROJECT_NAME" ] && echo "ERROR: COVERITY_SCAN_PROJECT_NAME must be set" && exit 1
|
|
[ -z "$COVERITY_SCAN_NOTIFICATION_EMAIL" ] && echo "ERROR: COVERITY_SCAN_NOTIFICATION_EMAIL must be set" && exit 1
|
|
[ -z "$COVERITY_SCAN_BRANCH_PATTERN" ] && echo "ERROR: COVERITY_SCAN_BRANCH_PATTERN must be set" && exit 1
|
|
[ -z "$COVERITY_SCAN_BUILD_COMMAND" ] && echo "ERROR: COVERITY_SCAN_BUILD_COMMAND must be set" && exit 1
|
|
[ -z "$COVERITY_SCAN_TOKEN" ] && echo "ERROR: COVERITY_SCAN_TOKEN must be set" && exit 1
|
|
|
|
# Do not run on pull requests
|
|
if [ "${TRAVIS_PULL_REQUEST}" = "true" ]; then
|
|
echo -e "\033[33;1mINFO: Skipping Coverity Analysis: branch is a pull request.\033[0m"
|
|
exit 0
|
|
fi
|
|
|
|
# Verify this branch should run
|
|
if [[ "${TRAVIS_BRANCH^^}" =~ "${COVERITY_SCAN_BRANCH_PATTERN^^}" ]]; then
|
|
echo -e "\033[33;1mCoverity Scan configured to run on branch ${TRAVIS_BRANCH}\033[0m"
|
|
else
|
|
echo -e "\033[33;1mCoverity Scan NOT configured to run on branch ${TRAVIS_BRANCH}\033[0m"
|
|
exit 1
|
|
fi
|
|
|
|
# Verify upload is permitted
|
|
AUTH_RES=`curl -s --form project="$COVERITY_SCAN_PROJECT_NAME" --form token="$COVERITY_SCAN_TOKEN" $SCAN_URL/api/upload_permitted`
|
|
if [ "$AUTH_RES" = "Access denied" ]; then
|
|
echo -e "\033[33;1mCoverity Scan API access denied. Check COVERITY_SCAN_PROJECT_NAME and COVERITY_SCAN_TOKEN.\033[0m"
|
|
exit 1
|
|
else
|
|
AUTH=`echo $AUTH_RES | python -c "import sys, json; print(json.load(sys.stdin)['upload_permitted'])"`
|
|
if [ "$AUTH" = "True" ]; then
|
|
echo -e "\033[33;1mCoverity Scan analysis authorized per quota.\033[0m"
|
|
else
|
|
WHEN=`echo $AUTH_RES | python -c "import sys, json; print(json.load(sys.stdin)['next_upload_permitted_at'])"`
|
|
echo -e "\033[33;1mCoverity Scan analysis NOT authorized until $WHEN.\033[0m"
|
|
exit 1
|
|
fi
|
|
fi
|
|
|
|
TOOL_DIR=`find $TOOL_BASE -type d -name 'cov-analysis*'`
|
|
export PATH="$TOOL_DIR/bin:$PATH"
|
|
|
|
# Disable CCACHE for cov-build to compilation units correctly
|
|
export CCACHE_DISABLE=1
|
|
|
|
# FUNCTION DEFINITIONS
|
|
# --------------------
|
|
_help()
|
|
{
|
|
# displays help and exits
|
|
cat <<-EOF
|
|
USAGE: $0 [CMD] [OPTIONS]
|
|
|
|
CMD
|
|
build Issue Coverity build
|
|
upload Upload coverity archive for analysis
|
|
Note: By default, archive is created from default results directory.
|
|
To provide custom archive or results directory, see --result-dir
|
|
and --tar options below.
|
|
|
|
OPTIONS
|
|
-h,--help Display this menu and exits
|
|
|
|
Applicable to build command
|
|
---------------------------
|
|
-o,--out-dir Specify Coverity intermediate directory (defaults to 'cov-int')
|
|
-t,--tar bool, archive the output to .tgz file (defaults to false)
|
|
|
|
Applicable to upload command
|
|
----------------------------
|
|
-d, --result-dir Specify result directory if different from default ('cov-int')
|
|
-t, --tar ARCHIVE Use custom .tgz archive instead of intermediate directory or pre-archived .tgz
|
|
(by default 'analysis-result.tgz'
|
|
EOF
|
|
return;
|
|
}
|
|
|
|
_pack()
|
|
{
|
|
RESULTS_ARCHIVE=${RESULTS_ARCHIVE:-'analysis-results.tgz'}
|
|
|
|
echo -e "\033[33;1mTarring Coverity Scan Analysis results...\033[0m"
|
|
tar czf $RESULTS_ARCHIVE $RESULTS_DIR
|
|
SHA=`git rev-parse --short HEAD`
|
|
|
|
PACKED=true
|
|
}
|
|
|
|
|
|
_build()
|
|
{
|
|
echo -e "\033[33;1mRunning Coverity Scan Analysis Tool...\033[0m"
|
|
local _cov_build_options=""
|
|
#local _cov_build_options="--return-emit-failures 8 --parse-error-threshold 85"
|
|
eval "${COVERITY_SCAN_BUILD_COMMAND_PREPEND}"
|
|
COVERITY_UNSUPPORTED=1 cov-build --dir $RESULTS_DIR $_cov_build_options sh -c "$COVERITY_SCAN_BUILD_COMMAND"
|
|
cov-import-scm --dir $RESULTS_DIR --scm git --log $RESULTS_DIR/scm_log.txt
|
|
|
|
if [ $? != 0 ]; then
|
|
echo -e "\033[33;1mCoverity Scan Build failed: $TEXT.\033[0m"
|
|
return 1
|
|
fi
|
|
|
|
[ -z $TAR ] || [ $TAR = false ] && return 0
|
|
|
|
if [ "$TAR" = true ]; then
|
|
_pack
|
|
fi
|
|
}
|
|
|
|
|
|
_upload()
|
|
{
|
|
# pack results
|
|
[ -z $PACKED ] || [ $PACKED = false ] && _pack
|
|
|
|
# Upload results
|
|
echo -e "\033[33;1mUploading Coverity Scan Analysis results...\033[0m"
|
|
response=$(curl \
|
|
--silent --write-out "\n%{http_code}\n" \
|
|
--form project=$COVERITY_SCAN_PROJECT_NAME \
|
|
--form token=$COVERITY_SCAN_TOKEN \
|
|
--form email=$COVERITY_SCAN_NOTIFICATION_EMAIL \
|
|
--form file=@$RESULTS_ARCHIVE \
|
|
--form version=$SHA \
|
|
--form description="Travis CI build" \
|
|
$UPLOAD_URL)
|
|
printf "\033[33;1mThe response is\033[0m\n%s\n" "$response"
|
|
status_code=$(echo "$response" | sed -n '$p')
|
|
# Coverity Scan used to respond with 201 on successfully receieving analysis results.
|
|
# Now for some reason it sends 200 and may change back in the foreseeable future.
|
|
# See https://github.com/pmem/pmdk/commit/7b103fd2dd54b2e5974f71fb65c81ab3713c12c5
|
|
if [ "$status_code" != "200" ]; then
|
|
TEXT=$(echo "$response" | sed '$d')
|
|
echo -e "\033[33;1mCoverity Scan upload failed: $TEXT.\033[0m"
|
|
exit 1
|
|
fi
|
|
|
|
echo -e "\n\033[33;1mCoverity Scan Analysis completed succesfully.\033[0m"
|
|
exit 0
|
|
}
|
|
|
|
# PARSE COMMAND LINE OPTIONS
|
|
# --------------------------
|
|
|
|
case $1 in
|
|
-h|--help)
|
|
_help
|
|
exit 0
|
|
;;
|
|
build)
|
|
CMD='build'
|
|
TEMP=`getopt -o ho:t --long help,out-dir:,tar -n '$0' -- "$@"`
|
|
_ec=$?
|
|
[[ $_ec -gt 0 ]] && _help && exit $_ec
|
|
shift
|
|
;;
|
|
upload)
|
|
CMD='upload'
|
|
TEMP=`getopt -o hd:t: --long help,result-dir:tar: -n '$0' -- "$@"`
|
|
_ec=$?
|
|
[[ $_ec -gt 0 ]] && _help && exit $_ec
|
|
shift
|
|
;;
|
|
*)
|
|
_help && exit 1 ;;
|
|
esac
|
|
|
|
RESULTS_DIR='cov-int'
|
|
|
|
eval set -- "$TEMP"
|
|
if [ $? != 0 ] ; then exit 1 ; fi
|
|
|
|
# extract options and their arguments into variables.
|
|
if [[ $CMD == 'build' ]]; then
|
|
TAR=false
|
|
while true ; do
|
|
case $1 in
|
|
-h|--help)
|
|
_help
|
|
exit 0
|
|
;;
|
|
-o|--out-dir)
|
|
RESULTS_DIR="$2"
|
|
shift 2
|
|
;;
|
|
-t|--tar)
|
|
TAR=true
|
|
shift
|
|
;;
|
|
--) _build; shift ; break ;;
|
|
*) echo "Internal error" ; _help && exit 6 ;;
|
|
esac
|
|
done
|
|
|
|
elif [[ $CMD == 'upload' ]]; then
|
|
while true ; do
|
|
case $1 in
|
|
-h|--help)
|
|
_help
|
|
exit 0
|
|
;;
|
|
-d|--result-dir)
|
|
CHANGE_DEFAULT_DIR=true
|
|
RESULTS_DIR="$2"
|
|
shift 2
|
|
;;
|
|
-t|--tar)
|
|
RESULTS_ARCHIVE="$2"
|
|
[ -z $CHANGE_DEFAULT_DIR ] || [ $CHANGE_DEFAULT_DIR = false ] && PACKED=true
|
|
shift 2
|
|
;;
|
|
--) _upload; shift ; break ;;
|
|
*) echo "Internal error" ; _help && exit 6 ;;
|
|
esac
|
|
done
|
|
|
|
fi
|