systemd/man/sd_notify.xml
Philip Withnall e69cacd2af man: Fix typo in sd_notify man page
Signed-off-by: Philip Withnall <withnall@endlessm.com>
2019-06-12 10:39:50 +01:00

411 lines
20 KiB
XML

<?xml version='1.0'?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<!-- SPDX-License-Identifier: LGPL-2.1+ -->
<refentry id="sd_notify"
xmlns:xi="http://www.w3.org/2001/XInclude">
<refentryinfo>
<title>sd_notify</title>
<productname>systemd</productname>
</refentryinfo>
<refmeta>
<refentrytitle>sd_notify</refentrytitle>
<manvolnum>3</manvolnum>
</refmeta>
<refnamediv>
<refname>sd_notify</refname>
<refname>sd_notifyf</refname>
<refname>sd_pid_notify</refname>
<refname>sd_pid_notifyf</refname>
<refname>sd_pid_notify_with_fds</refname>
<refpurpose>Notify service manager about start-up completion and other service status changes</refpurpose>
</refnamediv>
<refsynopsisdiv>
<funcsynopsis>
<funcsynopsisinfo>#include &lt;systemd/sd-daemon.h&gt;</funcsynopsisinfo>
<funcprototype>
<funcdef>int <function>sd_notify</function></funcdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const char *<parameter>state</parameter></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_notifyf</function></funcdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const char *<parameter>format</parameter></paramdef>
<paramdef></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_pid_notify</function></funcdef>
<paramdef>pid_t <parameter>pid</parameter></paramdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const char *<parameter>state</parameter></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_pid_notifyf</function></funcdef>
<paramdef>pid_t <parameter>pid</parameter></paramdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const char *<parameter>format</parameter></paramdef>
<paramdef></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_pid_notify_with_fds</function></funcdef>
<paramdef>pid_t <parameter>pid</parameter></paramdef>
<paramdef>int <parameter>unset_environment</parameter></paramdef>
<paramdef>const char *<parameter>state</parameter></paramdef>
<paramdef>const int *<parameter>fds</parameter></paramdef>
<paramdef>unsigned <parameter>n_fds</parameter></paramdef>
</funcprototype>
</funcsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para><function>sd_notify()</function> may be called by a service
to notify the service manager about state changes. It can be used
to send arbitrary information, encoded in an
environment-block-like string. Most importantly, it can be used for
start-up completion notification.</para>
<para>If the <parameter>unset_environment</parameter> parameter is
non-zero, <function>sd_notify()</function> will unset the
<varname>$NOTIFY_SOCKET</varname> environment variable before
returning (regardless of whether the function call itself
succeeded or not). Further calls to
<function>sd_notify()</function> will then fail, but the variable
is no longer inherited by child processes.</para>
<para>The <parameter>state</parameter> parameter should contain a
newline-separated list of variable assignments, similar in style
to an environment block. A trailing newline is implied if none is
specified. The string may contain any kind of variable
assignments, but the following shall be considered
well-known:</para>
<variablelist>
<varlistentry>
<term>READY=1</term>
<listitem><para>Tells the service manager that service startup is finished, or the service finished loading its
configuration. This is only used by systemd if the service definition file has <varname>Type=notify</varname>
set. Since there is little value in signaling non-readiness, the only value services should send is
<literal>READY=1</literal> (i.e. <literal>READY=0</literal> is not defined).</para></listitem>
</varlistentry>
<varlistentry>
<term>RELOADING=1</term>
<listitem><para>Tells the service manager that the service is
reloading its configuration. This is useful to allow the
service manager to track the service's internal state, and
present it to the user. Note that a service that sends this
notification must also send a <literal>READY=1</literal>
notification when it completed reloading its
configuration. Reloads are propagated in the same way as they
are when initiated by the user.</para></listitem>
</varlistentry>
<varlistentry>
<term>STOPPING=1</term>
<listitem><para>Tells the service manager that the service is
beginning its shutdown. This is useful to allow the service
manager to track the service's internal state, and present it
to the user.</para></listitem>
</varlistentry>
<varlistentry>
<term>STATUS=…</term>
<listitem><para>Passes a single-line UTF-8 status string back
to the service manager that describes the service state. This
is free-form and can be used for various purposes: general
state feedback, fsck-like programs could pass completion
percentages and failing programs could pass a human-readable
error message. Example: <literal>STATUS=Completed 66% of file
system check…</literal></para></listitem>
</varlistentry>
<varlistentry>
<term>ERRNO=…</term>
<listitem><para>If a service fails, the errno-style error
code, formatted as string. Example: <literal>ERRNO=2</literal>
for ENOENT.</para></listitem>
</varlistentry>
<varlistentry>
<term>BUSERROR=…</term>
<listitem><para>If a service fails, the D-Bus error-style
error code. Example:
<literal>BUSERROR=org.freedesktop.DBus.Error.TimedOut</literal></para></listitem>
</varlistentry>
<varlistentry>
<term>MAINPID=…</term>
<listitem><para>The main process ID (PID) of the service, in
case the service manager did not fork off the process itself.
Example: <literal>MAINPID=4711</literal></para></listitem>
</varlistentry>
<varlistentry>
<term>WATCHDOG=1</term>
<listitem><para>Tells the service manager to update the
watchdog timestamp. This is the keep-alive ping that services
need to issue in regular intervals if
<varname>WatchdogSec=</varname> is enabled for it. See
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for information how to enable this functionality and
<citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>
for the details of how the service can check whether the
watchdog is enabled. </para></listitem>
</varlistentry>
<varlistentry>
<term>WATCHDOG=trigger</term>
<listitem><para>Tells the service manager that the service detected an internal error that should be handled by
the configured watchdog options. This will trigger the same behaviour as if <varname>WatchdogSec=</varname> is
enabled and the service did not send <literal>WATCHDOG=1</literal> in time. Note that
<varname>WatchdogSec=</varname> does not need to be enabled for <literal>WATCHDOG=trigger</literal> to trigger
the watchdog action. See
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
information about the watchdog behavior. </para></listitem>
</varlistentry>
<varlistentry>
<term>WATCHDOG_USEC=…</term>
<listitem><para>Reset <varname>watchdog_usec</varname> value during runtime.
Notice that this is not available when using <function>sd_event_set_watchdog()</function>
or <function>sd_watchdog_enabled()</function>.
Example : <literal>WATCHDOG_USEC=20000000</literal></para></listitem>
</varlistentry>
<varlistentry>
<term>EXTEND_TIMEOUT_USEC=…</term>
<listitem><para>Tells the service manager to extend the startup, runtime or shutdown service timeout
corresponding the current state. The value specified is a time in microseconds during which the service must
send a new message. A service timeout will occur if the message isn't received, but only if the runtime of the
current state is beyond the original maximum times of <varname>TimeoutStartSec=</varname>, <varname>RuntimeMaxSec=</varname>,
and <varname>TimeoutStopSec=</varname>.
See <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for effects on the service timeouts.</para></listitem>
</varlistentry>
<varlistentry>
<term>FDSTORE=1</term>
<listitem><para>Stores additional file descriptors in the service manager. File descriptors sent this way will
be maintained per-service by the service manager and will later be handed back using the usual file descriptor
passing logic at the next invocation of the service, see
<citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>. This is
useful for implementing services that can restart after an explicit request or a crash without losing
state. Any open sockets and other file descriptors which should not be closed during the restart may be stored
this way. Application state can either be serialized to a file in <filename>/run</filename>, or better, stored
in a <citerefentry><refentrytitle>memfd_create</refentrytitle><manvolnum>2</manvolnum></citerefentry> memory
file descriptor. Note that the service manager will accept messages for a service only if its
<varname>FileDescriptorStoreMax=</varname> setting is non-zero (defaults to zero, see
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>). If file
descriptors sent are pollable (see
<citerefentry><refentrytitle>epoll_ctl</refentrytitle><manvolnum>2</manvolnum></citerefentry>), then any
<constant>EPOLLHUP</constant> or <constant>EPOLLERR</constant> event seen on them will result in their
automatic removal from the store. Multiple arrays of file descriptors may be sent in separate messages, in
which case the arrays are combined. Note that the service manager removes duplicate (pointing to the same
object) file descriptors before passing them to the service. Use <function>sd_pid_notify_with_fds()</function>
to send messages with <literal>FDSTORE=1</literal>, see below.</para></listitem>
</varlistentry>
<varlistentry>
<term>FDSTOREREMOVE=1</term>
<listitem><para>Removes file descriptors from the file descriptor store. This field needs to be combined with
<varname>FDNAME=</varname> to specify the name of the file descriptors to remove.</para></listitem>
</varlistentry>
<varlistentry>
<term>FDNAME=…</term>
<listitem><para>When used in combination with <varname>FDSTORE=1</varname>, specifies a name for the submitted
file descriptors. When used with <varname>FDSTOREREMOVE=1</varname>, specifies the name for the file
descriptors to remove. This name is passed to the service during activation, and may be queried using
<citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry>. File
descriptors submitted without this field set, will implicitly get the name <literal>stored</literal>
assigned. Note that, if multiple file descriptors are submitted at once, the specified name will be assigned to
all of them. In order to assign different names to submitted file descriptors, submit them in separate
invocations of <function>sd_pid_notify_with_fds()</function>. The name may consist of arbitrary ASCII
characters except control characters or <literal>:</literal>. It may not be longer than 255 characters. If a
submitted name does not follow these restrictions, it is ignored.</para></listitem>
</varlistentry>
</variablelist>
<para>It is recommended to prefix variable names that are not
listed above with <varname>X_</varname> to avoid namespace
clashes.</para>
<para>Note that systemd will accept status data sent from a
service only if the <varname>NotifyAccess=</varname> option is
correctly set in the service definition file. See
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details.</para>
<para>Note that <function>sd_notify()</function> notifications may be attributed to units correctly only if either
the sending process is still around at the time PID 1 processes the message, or if the sending process is
explicitly runtime-tracked by the service manager. The latter is the case if the service manager originally forked
off the process, i.e. on all processes that match <varname>NotifyAccess=</varname><option>main</option> or
<varname>NotifyAccess=</varname><option>exec</option>. Conversely, if an auxiliary process of the unit sends an
<function>sd_notify()</function> message and immediately exits, the service manager might not be able to properly
attribute the message to the unit, and thus will ignore it, even if
<varname>NotifyAccess=</varname><option>all</option> is set for it.</para>
<para><function>sd_notifyf()</function> is similar to
<function>sd_notify()</function> but takes a
<function>printf()</function>-like format string plus
arguments.</para>
<para><function>sd_pid_notify()</function> and
<function>sd_pid_notifyf()</function> are similar to
<function>sd_notify()</function> and
<function>sd_notifyf()</function> but take a process ID (PID) to
use as originating PID for the message as first argument. This is
useful to send notification messages on behalf of other processes,
provided the appropriate privileges are available. If the PID
argument is specified as 0, the process ID of the calling process
is used, in which case the calls are fully equivalent to
<function>sd_notify()</function> and
<function>sd_notifyf()</function>.</para>
<para><function>sd_pid_notify_with_fds()</function> is similar to
<function>sd_pid_notify()</function> but takes an additional array
of file descriptors. These file descriptors are sent along the
notification message to the service manager. This is particularly
useful for sending <literal>FDSTORE=1</literal> messages, as
described above. The additional arguments are a pointer to the
file descriptor array plus the number of file descriptors in the
array. If the number of file descriptors is passed as 0, the call
is fully equivalent to <function>sd_pid_notify()</function>, i.e.
no file descriptors are passed. Note that sending file descriptors
to the service manager on messages that do not expect them (i.e.
without <literal>FDSTORE=1</literal>) they are immediately closed
on reception.</para>
</refsect1>
<refsect1>
<title>Return Value</title>
<para>On failure, these calls return a negative errno-style error code. If <varname>$NOTIFY_SOCKET</varname> was
not set and hence no status message could be sent, 0 is returned. If the status was sent, these functions return a
positive value. In order to support both service managers that implement this scheme and those which do not, it is
generally recommended to ignore the return value of this call. Note that the return value simply indicates whether
the notification message was enqueued properly, it does not reflect whether the message could be processed
successfully. Specifically, no error is returned when a file descriptor is attempted to be stored using
<varname>FDSTORE=1</varname> but the service is not actually configured to permit storing of file descriptors (see
above).</para>
</refsect1>
<refsect1>
<title>Notes</title>
<xi:include href="libsystemd-pkgconfig.xml" xpointer="pkgconfig-text"/>
<para>These functions send a single datagram with the
state string as payload to the <constant>AF_UNIX</constant> socket
referenced in the <varname>$NOTIFY_SOCKET</varname> environment
variable. If the first character of
<varname>$NOTIFY_SOCKET</varname> is <literal>@</literal>, the
string is understood as Linux abstract namespace socket. The
datagram is accompanied by the process credentials of the sending
service, using SCM_CREDENTIALS.</para>
</refsect1>
<refsect1>
<title>Environment</title>
<variablelist class='environment-variables'>
<varlistentry>
<term><varname>$NOTIFY_SOCKET</varname></term>
<listitem><para>Set by the service manager for supervised
processes for status and start-up completion notification.
This environment variable specifies the socket
<function>sd_notify()</function> talks to. See above for
details.</para></listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Examples</title>
<example>
<title>Start-up Notification</title>
<para>When a service finished starting up, it might issue the
following call to notify the service manager:</para>
<programlisting>sd_notify(0, "READY=1");</programlisting>
</example>
<example>
<title>Extended Start-up Notification</title>
<para>A service could send the following after completing
initialization:</para>
<programlisting>sd_notifyf(0, "READY=1\n"
"STATUS=Processing requests…\n"
"MAINPID=%lu",
(unsigned long) getpid());</programlisting>
</example>
<example>
<title>Error Cause Notification</title>
<para>A service could send the following shortly before exiting, on failure:</para>
<programlisting>sd_notifyf(0, "STATUS=Failed to start up: %s\n"
"ERRNO=%i",
strerror(errno),
errno);</programlisting>
</example>
<example>
<title>Store a File Descriptor in the Service Manager</title>
<para>To store an open file descriptor in the service manager,
in order to continue operation after a service restart without
losing state, use <literal>FDSTORE=1</literal>:</para>
<programlisting>sd_pid_notify_with_fds(0, 0, "FDSTORE=1\nFDNAME=foobar", &amp;fd, 1);</programlisting>
</example>
</refsect1>
<refsect1>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
</para>
</refsect1>
</refentry>