systemd/man/journalctl.xml
Zbigniew Jędrzejewski-Szmek 8b9f092112 man: fix issues reported by the manpage-l10n project
Fixes #25780.

> Man page: crypttab.5
> Issue 1:  Missing fullstop
> Issue 2:  I<cipher=>, I<hash=>, I<size=> → B<cipher=>, B<hash=>, B<size=>
>
> "Force LUKS mode\\&. When this mode is used, the following options are "
> "ignored since they are provided by the LUKS header on the device: "
> "I<cipher=>, I<hash=>, I<size=>"

Seems OK to me. The full stop is there and has been for at least a few years. And we use <option> for the markup, which is appropriate here.

> Man page: crypttab.5
> Issue 1:  Missing fullstop
> Issue 2:  I<cipher=>, I<hash=>, I<keyfile-offset=>, I<keyfile-size=>, I<size=> → B<cipher=>, B<hash=>, B<keyfile-offset=>, B<keyfile-size=>, B<size=>
>
> "Use TrueCrypt encryption mode\\&. When this mode is used, the following "
> "options are ignored since they are provided by the TrueCrypt header on the "
> "device or do not apply: I<cipher=>, I<hash=>, I<keyfile-offset=>, I<keyfile-"
> "size=>, I<size=>"

Same.

> Man page: journalctl.1
> Issue 1:  make be → may be

Fixed.

> Issue 2:  below\\&. → below:

Fixed.

> Man page: journalctl.1
> Issue:    Colon at the end?
>
> "The following commands are understood\\&. If none is specified the default "
> "is to display journal records\\&."
> msgstr ""
> "Die folgenden Befehle werden verstanden\\&. Falls keiner festgelegt ist, ist "
> "die Anzeige von Journal-Datensätzen die Vorgabe\\&."

This is a bit awkward, but I'm not sure how to fix it.

> Man page: kernel-install.8
> Issue:    methods a fallback → methods fallback

It was correct, but I added a comma to make the sense clearer.

> Man page: loader.conf.5
> Issue 1:  secure boot variables → Secure Boot variables
> Issue 2:  one → one for (multiple times)
>
> "Supported secure boot variables are one database for authorized images, one "
> "key exchange key (KEK) and one platform key (PK)\\&. For more information, "
> "refer to the \\m[blue]B<UEFI specification>\\m[]\\&\\s-2\\u[2]\\d\\s+2, "
> "under Secure Boot and Driver Signing\\&. Another resource that describe the "
> "interplay of the different variables is the \\m[blue]B<EDK2 "
> "documentation>\\m[]\\&\\s-2\\u[3]\\d\\s+2\\&."

"one of" would sound strange. "One this and one that" is OK.

> Man page: loader.conf.5
> Issue:    systemd-boot → B<systemd-boot>(7)

Fixed.

> Man page: logind.conf.5
> Issue:    systemd-logind → B<systemd-logind>(8)

We use <filename>systemd-logind</> on subsequent references… I think that's good enough.

> Man page: nss-myhostname.8
> Issue:    B<getent> → B<getent>(1)

Fixed.

> Man page: nss-resolve.8
> Issue:    B<systemd-resolved> → B<systemd-resolved>(8)

The first reference does this, subsequent are shorter.

> Man page: os-release.5
> Issue:    Portable Services → Portable Services Documentation?

Updated.

> Man page: pam_systemd_home.8
> Issue:    auth and account use "reason", while session and password do not?

Reworded.

> Man page: portablectl.1
> Issue:    In systemd-portabled.service(8): Portable Services Documentation

Updated.

> Man page: repart.d.5
> Issue:    The partition → the partition

Fixed.

> Man page: repart.d.5
> Issue:    B<systemd-repart> → B<systemd-repart>(8)

The first reference does this. I also change this one, because it's pretty far down in the text.

> Man page: systemd.1
> Issue:    kernel command line twice?
>
> "Takes a boolean argument\\&. If false disables importing credentials from "
> "the kernel command line, qemu_fw_cfg subsystem or the kernel command line\\&."

Apparently this was fixed already.

> Man page: systemd-boot.7
> Issue:    enrollement → enrollment

Fixed.

> Man page: systemd-cryptenroll.1
> Issue:    multiple cases: any specified → the specified

Reworded.

> Man page: systemd-cryptenroll.1
> Issue:    If this this → If this

Fixed tree-wide.

> Man page: systemd-cryptsetup-generator.8
> Issue:    and the initrd → and in the initrd

"Is honoured by the initrd" is OK, because we often speak about the initrd as a single unit. But in the same paragraph we also used "in the initrd", which makes the other use look sloppy. I changed it to "in the initrd" everywhere in that file.

> Man page: systemd.directives.7
> Issue:    Why are these two quoted (but not others)?
>
> "B<\\*(Aqh\\*(Aq>"
>
> B<\\*(Aqs\\*(Aq>"
>
> "B<\\*(Aqy\\*(Aq>"

This is autogenerated from files… We use slightly different markup in different files, and it's just too hard to make it consistent. We gave up on this.

> Man page: systemd.exec.5
> Issue 1:  B<at>(1p) → B<at>(1)
> Issue 2:  B<crontab>(1p) → B<crontab>(1)

Fixed.

> Man page: systemd.exec.5
> Issue:    B<select()> → B<select>(2)

Fixed.

> Man page: systemd.exec.5
> Issue:   qemu → B<qemu>(1)

The man page doesn't seem to be in any of the canonical places on the web.
I added a link to online docs.

> Man page: systemd.exec.5
> Issue:    variable → variables

Seems to be fixed already.

> Man page: systemd-integritysetup-generator.8
> Issue:    systemd-integritysetup-generator → B<systemd-integritysetup-generator>

I changed <filename> to <command>.

> Man page: systemd-integritysetup-generator.8
> Issue:    superfluous comma at the end

Already fixed.

> Man page: systemd-measure.1
> Issue:    (see B<--pcr-bank=>) below → (see B<--pcr-bank=> below)

Reworded.

> Man page: systemd-measure.1
> Issue:    =PATH> → =>I<PATH>

Fixed.

> Man page: systemd-measure.1.po
> Issue:    B<--bank=DIGEST> → B<--bank=>I<DIGEST>

Fixed.

> Man page: systemd.netdev.5
> Issue:    os the → on the

Appears to have been fixed already.

> Man page: systemd.netdev.5
> Issue:    Onboard → On-board (as in previous string)

Updated.

> Man page: systemd.network.5
> Issue:    B<systemd-networkd> -> B<systemd-networkd>(8)

First reference does this, subsequent do not.

> Man page: systemd.network.5
> Issue:    B<netlabelctl> → B<netlabelctl>(8)

First reference does this, subsequent do not.

> Man page: systemd.network.5
> Issue:    Missing verb (aquired? configured?) in the half sentence starting with "or by a "

I dropped the comma.

> Man page: systemd-nspawn.1
> Issue:    All host users outside of that range → All other host users

Reworded.

> # FIXME no effect → no effect\\&.
> #. type: Plain text
> #: archlinux debian-unstable fedora-rawhide mageia-cauldron opensuse-tumbleweed
> msgid ""
> "Whichever ID mapping option is used, the same mapping will be used for users "
> "and groups IDs\\&. If B<rootidmap> is used, the group owning the bind "
> "mounted directory will have no effect"

A period is added. Not sure if there's some other issue.

> Man page: systemd-oomd.service.8
> Issue:    B<systemd> → B<systemd>(1)

Done.

> Man page: systemd.path.5
> Issue 1:  B<systemd.exec>(1) → B<systemd.exec>(5)
> Issue 2:  This section does not (yet?) exist

Fixed.

> Man page: systemd-pcrphase.service.8
> Issue 1:  indicate phases into TPM2 PCR 11 ??
> Issue 2: Colon at the end of the paragraph?

Fixed.

> Man page: systemd-pcrphase.service.8
> Issue:    final boot phase → final shutdown phase?

Updated.

> Man page: systemd-pcrphase.service.8
> Issue:    for the the → for the

Fixed tree-wide.

> Man page: systemd-portabled.service.8
> Issue:    In systemd-portabled.service(8): Portable Services Documentation

Updated.

> Man page: systemd-pstore.service.8
> Issue:    Here and the following paragraphs: . → \\&. // Upstream: What does this comment mean? // You normally write \\&. for a full dot (full stop etc.); here you write only "." (i.e. a plain dot).
>
> "and we look up \"localhost\", nss-dns will send the following queries to "
> "systemd-resolved listening on 127.0.0.53:53: first \"localhost.foobar.com\", "
> "then \"localhost.barbar.com\", and finally \"localhost\". If (hopefully) the "
> "first two queries fail, systemd-resolved will synthesize an answer for the "
> "third query."

Looks all OK to me.

> Man page: systemd.resource-control.5
> Issue:    Missing closing bracket after link to Control Groups version 1

Fixed.

> Man page: systemd-sysext.8
> Issue:    In systemd-portabled.service(8): Portable Services Documentation

Updated.

> Man page: systemd.timer.5
> Issue 1:  B<systemd.exec>(1) → B<systemd.exec>(5)
> Issue 2:  This section does not (yet?) exist

Fixed.

> Man page: systemd.unit.5
> Issue:    that is → that are

Fixed.

> Man page: systemd-veritysetup-generator.8
> Issue:    systemd-veritysetup-generator → B<systemd-veritysetup-generator>
>
 > "systemd-veritysetup-generator implements B<systemd.generator>(7)\\&."
>
> "systemd-veritysetup-generator understands the following kernel command line "
> "parameters:"

Updated.

> Man page: systemd-volatile-root.service.8
> Issue:    initrdyes → Initrd

Fixed.

> Man page: sysupdate.d.5
> Issue:    : → \\&. (As above in TRANSFER)

Updated.

> Man page: sysupdate.d.5
> Issue:    some → certain

Updated.

> Man page: sysupdate.d.5
> Issue 1:  i\\&.e\\& → I\\&.e\\&

Fixed.

> Issue 2:  the image → the system

"image" seems correct.

> Man page: tmpfiles.d.5
> Issue:    systemd-tmpfiles → B<systemd-tmpfiles>(8)

Updated.
2023-01-11 17:12:54 +01:00

954 lines
49 KiB
XML
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version='1.0'?> <!--*-nxml-*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<!-- SPDX-License-Identifier: LGPL-2.1-or-later -->
<refentry id="journalctl"
xmlns:xi="http://www.w3.org/2001/XInclude">
<refentryinfo>
<title>journalctl</title>
<productname>systemd</productname>
</refentryinfo>
<refmeta>
<refentrytitle>journalctl</refentrytitle>
<manvolnum>1</manvolnum>
</refmeta>
<refnamediv>
<refname>journalctl</refname>
<refpurpose>Print log entries from the systemd journal</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>journalctl</command>
<arg choice="opt" rep="repeat">OPTIONS</arg>
<arg choice="opt" rep="repeat">MATCHES</arg>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para><command>journalctl</command> is used to print the log entries stored in the journal by
<citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
and
<citerefentry><refentrytitle>systemd-journal-remote.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
</para>
<para>If called without parameters, it will show the contents of the journal accessible to the calling
user, starting with the oldest entry collected.</para>
<para>If one or more match arguments are passed, the output is filtered accordingly. A match is in the
format <literal>FIELD=VALUE</literal>, e.g. <literal>_SYSTEMD_UNIT=httpd.service</literal>, referring to
the components of a structured journal entry. See
<citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>
for a list of well-known fields. If multiple matches are specified matching different fields, the log
entries are filtered by both, i.e. the resulting output will show only entries matching all the specified
matches of this kind. If two matches apply to the same field, then they are automatically matched as
alternatives, i.e. the resulting output will show entries matching any of the specified matches for the
same field. Finally, the character <literal>+</literal> may appear as a separate word between other terms
on the command line. This causes all matches before and after to be combined in a disjunction
(i.e. logical OR).</para>
<para>It is also possible to filter the entries by specifying an absolute file path as an argument. The
file path may be a file or a symbolic link and the file must exist at the time of the query. If a file
path refers to an executable binary, an <literal>_EXE=</literal> match for the canonicalized binary path
is added to the query. If a file path refers to an executable script, a <literal>_COMM=</literal> match
for the script name is added to the query. If a file path refers to a device node,
<literal>_KERNEL_DEVICE=</literal> matches for the kernel name of the device and for each of its ancestor
devices is added to the query. Symbolic links are dereferenced, kernel names are synthesized, and parent
devices are identified from the environment at the time of the query. In general, a device node is the
best proxy for an actual device, as log entries do not usually contain fields that identify an actual
device. For the resulting log entries to be correct for the actual device, the relevant parts of the
environment at the time the entry was logged, in particular the actual device corresponding to the device
node, must have been the same as those at the time of the query. Because device nodes generally change
their corresponding devices across reboots, specifying a device node path causes the resulting entries to
be restricted to those from the current boot.</para>
<para>Additional constraints may be added using options <option>--boot</option>,
<option>--unit=</option>, etc., to further limit what entries will be shown (logical AND).</para>
<para>Output is interleaved from all accessible journal files, whether they are rotated or currently
being written, and regardless of whether they belong to the system itself or are accessible user
journals. The <option>--header</option> option can be used to identify which files
<emphasis>are</emphasis> being shown.</para>
<para>The set of journal files which will be used can be modified using the <option>--user</option>,
<option>--system</option>, <option>--directory</option>, and <option>--file</option> options, see
below.</para>
<para>All users are granted access to their private per-user journals. However, by default, only root and
users who are members of a few special groups are granted access to the system journal and the journals
of other users. Members of the groups <literal>systemd-journal</literal>, <literal>adm</literal>, and
<literal>wheel</literal> can read all journal files. Note that the two latter groups traditionally have
additional privileges specified by the distribution. Members of the <literal>wheel</literal> group can
often perform administrative tasks.</para>
<para>The output is paged through <command>less</command> by default, and long lines are "truncated" to
screen width. The hidden part can be viewed by using the left-arrow and right-arrow keys. Paging can be
disabled; see the <option>--no-pager</option> option and the "Environment" section below.</para>
<para>When outputting to a tty, lines are colored according to priority: lines of level ERROR and higher
are colored red; lines of level NOTICE and higher are highlighted; lines of level DEBUG are colored
lighter grey; other lines are displayed normally.</para>
<para>To write entries <emphasis>to</emphasis> the journal, a few methods may be used. In general, output
from systemd units is automatically connected to the journal, see
<citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
In addition,
<citerefentry><refentrytitle>systemd-cat</refentrytitle><manvolnum>1</manvolnum></citerefentry>
may be used to send messages to the journal directly.</para>
</refsect1>
<refsect1>
<title>Source Options</title>
<para>The following options control where to read journal records from:</para>
<variablelist>
<varlistentry>
<term><option>--system</option></term>
<term><option>--user</option></term>
<listitem><para>Show messages from system services and the kernel (with
<option>--system</option>). Show messages from service of current user (with
<option>--user</option>). If neither is specified, show all messages that the user can see.
</para>
<para>The <option>--user</option> option affects how <option>--unit</option> arguments are
treated. See <option>--unit</option>.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-M</option></term>
<term><option>--machine=</option></term>
<listitem><para>Show messages from a running, local container. Specify a container name to connect
to.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-m</option></term>
<term><option>--merge</option></term>
<listitem><para>Show entries interleaved from all available journals, including remote
ones.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-D <replaceable>DIR</replaceable></option></term>
<term><option>--directory=<replaceable>DIR</replaceable></option></term>
<listitem><para>Takes a directory path as argument. If specified, journalctl will operate on the
specified journal directory <replaceable>DIR</replaceable> instead of the default runtime and system
journal paths.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--file=<replaceable>GLOB</replaceable></option></term>
<listitem><para>Takes a file glob as an argument. If specified, journalctl will operate on the
specified journal files matching <replaceable>GLOB</replaceable> instead of the default runtime and
system journal paths. May be specified multiple times, in which case files will be suitably
interleaved.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--root=<replaceable>ROOT</replaceable></option></term>
<listitem><para>Takes a directory path as an argument. If specified, <command>journalctl</command>
will operate on journal directories and catalog file hierarchy underneath the specified directory
instead of the root directory (e.g. <option>--update-catalog</option> will create
<filename><replaceable>ROOT</replaceable>/var/lib/systemd/catalog/database</filename>, and journal
files under <filename><replaceable>ROOT</replaceable>/run/journal/</filename> or
<filename><replaceable>ROOT</replaceable>/var/log/journal/</filename> will be displayed).
</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--image=<replaceable>IMAGE</replaceable></option></term>
<listitem><para>Takes a path to a disk image file or block device node. If specified,
<command>journalctl</command> will operate on the file system in the indicated disk image. This
option is similar to <option>--root=</option>, but operates on file systems stored in disk images or
block devices, thus providing an easy way to extract log data from disk images. The disk image should
either contain just a file system or a set of file systems within a GPT partition table, following
the <ulink url="https://uapi-group.org/specifications/specs/discoverable_partitions_specification">Discoverable Partitions
Specification</ulink>. For further information on supported disk images, see
<citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s
switch of the same name.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--namespace=<replaceable>NAMESPACE</replaceable></option></term>
<listitem><para>Takes a journal namespace identifier string as argument. If not specified the data
collected by the default namespace is shown. If specified shows the log data of the specified
namespace instead. If the namespace is specified as <literal>*</literal> data from all namespaces is
shown, interleaved. If the namespace identifier is prefixed with <literal>+</literal> data from the
specified namespace and the default namespace is shown, interleaved, but no other. For details about
journal namespaces see
<citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para></listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Filtering Options</title>
<para>The following options control how to filter journal records:</para>
<variablelist>
<varlistentry>
<term><option>-S</option></term>
<term><option>--since=</option></term>
<term><option>-U</option></term>
<term><option>--until=</option></term>
<listitem><para>Start showing entries on or newer than the specified date, or on or older than the
specified date, respectively. Date specifications should be of the format <literal>2012-10-30
18:17:16</literal>. If the time part is omitted, <literal>00:00:00</literal> is assumed. If only
the seconds component is omitted, <literal>:00</literal> is assumed. If the date component is
omitted, the current day is assumed. Alternatively the strings <literal>yesterday</literal>,
<literal>today</literal>, <literal>tomorrow</literal> are understood, which refer to 00:00:00 of the
day before the current day, the current day, or the day after the current day,
respectively. <literal>now</literal> refers to the current time. Finally, relative times may be
specified, prefixed with <literal>-</literal> or <literal>+</literal>, referring to times before or
after the current time, respectively. For complete time and date specification, see
<citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>. Note
that <option>--output=short-full</option> prints timestamps that follow precisely this format.
</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-c</option></term>
<term><option>--cursor=</option></term>
<listitem><para>Start showing entries from the location in the journal specified by the passed
cursor.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--after-cursor=</option></term>
<listitem><para>Start showing entries from the location in the journal <emphasis>after</emphasis>
the location specified by the passed cursor. The cursor is shown when the
<option>--show-cursor</option> option is used.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--cursor-file=<replaceable>FILE</replaceable></option></term>
<listitem><para>If <replaceable>FILE</replaceable> exists and contains a cursor, start showing
entries <emphasis>after</emphasis> this location. Otherwise show entries according to the other
given options. At the end, write the cursor of the last entry to
<replaceable>FILE</replaceable>. Use this option to continually read the journal by sequentially
calling <command>journalctl</command>.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-b <optional><optional><replaceable>ID</replaceable></optional><optional><replaceable>±offset</replaceable></optional>|<constant>all</constant></optional></option></term>
<term><option>--boot<optional>=<optional><replaceable>ID</replaceable></optional><optional><replaceable>±offset</replaceable></optional>|<constant>all</constant></optional></option></term>
<listitem><para>Show messages from a specific boot. This will add a match for
<literal>_BOOT_ID=</literal>.</para>
<para>The argument may be empty, in which case logs for the current boot will be shown.</para>
<para>If the boot ID is omitted, a positive <replaceable>offset</replaceable> will look up the boots
starting from the beginning of the journal, and an equal-or-less-than zero
<replaceable>offset</replaceable> will look up boots starting from the end of the journal. Thus,
<constant>1</constant> means the first boot found in the journal in chronological order,
<constant>2</constant> the second and so on; while <constant>-0</constant> is the last boot,
<constant>-1</constant> the boot before last, and so on. An empty <replaceable>offset</replaceable>
is equivalent to specifying <constant>-0</constant>, except when the current boot is not the last
boot (e.g. because <option>--directory</option> was specified to look at logs from a different
machine).</para>
<para>If the 32-character <replaceable>ID</replaceable> is specified, it may optionally be followed
by <replaceable>offset</replaceable> which identifies the boot relative to the one given by boot
<replaceable>ID</replaceable>. Negative values mean earlier boots and positive values mean later
boots. If <replaceable>offset</replaceable> is not specified, a value of zero is assumed, and the
logs for the boot given by <replaceable>ID</replaceable> are shown.</para>
<para>The special argument <constant>all</constant> can be used to negate the effect of an earlier
use of <option>-b</option>.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-u</option></term>
<term><option>--unit=<replaceable>UNIT</replaceable>|<replaceable>PATTERN</replaceable></option></term>
<listitem><para>Show messages for the specified systemd unit <replaceable>UNIT</replaceable> (such as
a service unit), or for any of the units matched by <replaceable>PATTERN</replaceable>. If a pattern
is specified, a list of unit names found in the journal is compared with the specified pattern and
all that match are used. For each unit name, a match is added for messages from the unit
(<literal>_SYSTEMD_UNIT=<replaceable>UNIT</replaceable></literal>), along with additional matches for
messages from systemd and messages about coredumps for the specified unit. A match is also added for
<literal>_SYSTEMD_SLICE=<replaceable>UNIT</replaceable></literal>, such that if the provided
<replaceable>UNIT</replaceable> is a
<citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>
unit, all logs of children of the slice will be shown.</para>
<para>With <option>--user</option>, all <option>--unit</option> arguments will be converted to match
user messages as if specified with <option>--user-unit</option>.</para>
<para>This parameter can be specified multiple times.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--user-unit=</option></term>
<listitem><para>Show messages for the specified user session unit. This will add a match for messages
from the unit (<literal>_SYSTEMD_USER_UNIT=</literal> and <literal>_UID=</literal>) and additional
matches for messages from session systemd and messages about coredumps for the specified unit. A
match is also added for <literal>_SYSTEMD_USER_SLICE=<replaceable>UNIT</replaceable></literal>, such
that if the provided <replaceable>UNIT</replaceable> is a
<citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>
unit, all logs of children of the unit will be shown.</para>
<para>This parameter can be specified multiple times.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-t</option></term>
<term><option>--identifier=<replaceable>SYSLOG_IDENTIFIER</replaceable></option></term>
<listitem><para>Show messages for the specified syslog identifier
<replaceable>SYSLOG_IDENTIFIER</replaceable>.</para>
<para>This parameter can be specified multiple times.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-p</option></term>
<term><option>--priority=</option></term>
<listitem><para>Filter output by message priorities or priority ranges. Takes either a single numeric
or textual log level (i.e. between 0/<literal>emerg</literal> and 7/<literal>debug</literal>), or a
range of numeric/text log levels in the form FROM..TO. The log levels are the usual syslog log levels
as documented in <citerefentry
project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
i.e. <literal>emerg</literal> (0), <literal>alert</literal> (1), <literal>crit</literal> (2),
<literal>err</literal> (3), <literal>warning</literal> (4), <literal>notice</literal> (5),
<literal>info</literal> (6), <literal>debug</literal> (7). If a single log level is specified, all
messages with this log level or a lower (hence more important) log level are shown. If a range is
specified, all messages within the range are shown, including both the start and the end value of the
range. This will add <literal>PRIORITY=</literal> matches for the specified
priorities.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--facility=</option></term>
<listitem><para>Filter output by syslog facility. Takes a comma-separated list of numbers or
facility names. The names are the usual syslog facilities as documented in <citerefentry
project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
<option>--facility=help</option> may be used to display a list of known facility names and exit.
</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-g</option></term>
<term><option>--grep=</option></term>
<listitem><para>Filter output to entries where the <varname>MESSAGE=</varname> field matches the
specified regular expression. PERL-compatible regular expressions are used, see <citerefentry
project='url'><refentrytitle
url='http://pcre.org/current/doc/html/pcre2pattern.html'>pcre2pattern</refentrytitle><manvolnum>3</manvolnum></citerefentry>
for a detailed description of the syntax.</para>
<para>If the pattern is all lowercase, matching is case insensitive. Otherwise, matching is case
sensitive. This can be overridden with the <option>--case-sensitive</option> option, see
below.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--case-sensitive<optional>=BOOLEAN</optional></option></term>
<listitem><para>Make pattern matching case sensitive or case insensitive.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-k</option></term>
<term><option>--dmesg</option></term>
<listitem><para>Show only kernel messages. This implies <option>-b</option> and adds the match
<literal>_TRANSPORT=kernel</literal>.</para></listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Output Options</title>
<para>The following options control how journal records are printed:</para>
<variablelist>
<varlistentry>
<term><option>-o</option></term>
<term><option>--output=</option></term>
<listitem><para>Controls the formatting of the journal entries that are shown. Takes one of the
following options:</para>
<variablelist>
<varlistentry>
<term><option>short</option></term>
<listitem><para>is the default and generates an output that is mostly identical to the
formatting of classic syslog files, showing one line per journal entry.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>short-full</option></term>
<listitem><para>is very similar, but shows timestamps in the format the
<option>--since=</option> and <option>--until=</option> options accept. Unlike the timestamp
information shown in <option>short</option> output mode this mode includes weekday, year and
timezone information in the output, and is locale-independent.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>short-iso</option></term>
<listitem><para>is very similar, but shows ISO 8601 wallclock timestamps.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>short-iso-precise</option></term>
<listitem><para>as for <option>short-iso</option> but includes full microsecond
precision.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>short-precise</option></term>
<listitem><para>is very similar, but shows classic syslog timestamps with full microsecond
precision.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>short-monotonic</option></term>
<listitem><para>is very similar, but shows monotonic timestamps instead of wallclock
timestamps.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>short-delta</option></term>
<listitem><para>as for <option>short-monotonic</option> but includes the time difference
to the previous entry.
Maybe unreliable time differences are marked by a <literal>*</literal>.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>short-unix</option></term>
<listitem><para>is very similar, but shows seconds passed since January 1st 1970 UTC instead of
wallclock timestamps ("UNIX time"). The time is shown with microsecond accuracy.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>verbose</option></term>
<listitem><para>shows the full-structured entry items with all fields.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>export</option></term>
<listitem><para>serializes the journal into a binary (but mostly text-based) stream suitable
for backups and network transfer (see <ulink
url="https://systemd.io/JOURNAL_EXPORT_FORMATS#journal-export-format">Journal Export
Format</ulink> for more information). To import the binary stream back into native journald
format use
<citerefentry><refentrytitle>systemd-journal-remote</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>json</option></term>
<listitem><para>formats entries as JSON objects, separated by newline characters (see <ulink
url="https://systemd.io/JOURNAL_EXPORT_FORMATS#journal-json-format">Journal JSON Format</ulink>
for more information). Field values are generally encoded as JSON strings, with three exceptions:
<orderedlist>
<listitem><para>Fields larger than 4096 bytes are encoded as <constant>null</constant>
values. (This may be turned off by passing <option>--all</option>, but be aware that this may
allocate overly long JSON objects.)</para></listitem>
<listitem><para>Journal entries permit non-unique fields within the same log entry. JSON does
not allow non-unique fields within objects. Due to this, if a non-unique field is encountered a
JSON array is used as field value, listing all field values as elements.</para></listitem>
<listitem><para>Fields containing non-printable or non-UTF8 bytes are encoded as arrays
containing the raw bytes individually formatted as unsigned numbers.</para></listitem>
</orderedlist>
Note that this encoding is reversible (with the exception of the size limit).</para></listitem>
</varlistentry>
<varlistentry>
<term><option>json-pretty</option></term>
<listitem><para>formats entries as JSON data structures, but formats them in multiple lines in
order to make them more readable by humans.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>json-sse</option></term>
<listitem><para>formats entries as JSON data structures, but wraps them in a format suitable for
<ulink
url="https://developer.mozilla.org/en-US/docs/Server-sent_events/Using_server-sent_events">Server-Sent
Events</ulink>.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>json-seq</option></term>
<listitem><para>formats entries as JSON data structures, but prefixes them with an ASCII Record
Separator character (0x1E) and suffixes them with an ASCII Line Feed character (0x0A), in
accordance with <ulink url="https://tools.ietf.org/html/rfc7464">JavaScript Object Notation
(JSON) Text Sequences </ulink> (<literal>application/json-seq</literal>).</para></listitem>
</varlistentry>
<varlistentry>
<term><option>cat</option></term>
<listitem><para>generates a very terse output, only showing the actual message of each journal
entry with no metadata, not even a timestamp. If combined with the
<option>--output-fields=</option> option will output the listed fields for each log record,
instead of the message.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>with-unit</option></term>
<listitem><para>similar to <option>short-full</option>, but prefixes the unit and user unit names
instead of the traditional syslog identifier. Useful when using templated instances, as it will
include the arguments in the unit names.</para></listitem>
</varlistentry>
</variablelist></listitem>
</varlistentry>
<varlistentry>
<term><option>--output-fields=</option></term>
<listitem><para>A comma separated list of the fields which should be included in the output. This
has an effect only for the output modes which would normally show all fields
(<option>verbose</option>, <option>export</option>, <option>json</option>,
<option>json-pretty</option>, <option>json-sse</option> and <option>json-seq</option>), as well as
on <option>cat</option>. For the former, the <literal>__CURSOR</literal>,
<literal>__REALTIME_TIMESTAMP</literal>, <literal>__MONOTONIC_TIMESTAMP</literal>, and
<literal>_BOOT_ID</literal> fields are always printed.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-n</option></term>
<term><option>--lines=</option></term>
<listitem><para>Show the most recent journal events and limit the number of events shown. If
<option>--follow</option> is used, this option is implied. The argument is a positive integer or
<literal>all</literal> to disable line limiting. The default value is 10 if no argument is
given.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-r</option></term>
<term><option>--reverse</option></term>
<listitem><para>Reverse output so that the newest entries are displayed first.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--show-cursor</option></term>
<listitem><para>The cursor is shown after the last entry after two dashes:</para>
<programlisting>-- cursor: s=0639…</programlisting>
<para>The format of the cursor is private and subject to change.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--utc</option></term>
<listitem><para>Express time in Coordinated Universal Time (UTC).</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-x</option></term>
<term><option>--catalog</option></term>
<listitem><para>Augment log lines with explanation texts from the message catalog. This will add
explanatory help texts to log messages in the output where this is available. These short help texts
will explain the context of an error or log event, possible solutions, as well as pointers to support
forums, developer documentation, and any other relevant manuals. Note that help texts are not
available for all messages, but only for selected ones. For more information on the message catalog,
please refer to the <ulink url="https://www.freedesktop.org/wiki/Software/systemd/catalog">Message
Catalog Developer Documentation</ulink>.</para>
<para>Note: when attaching <command>journalctl</command> output to bug reports, please do
<emphasis>not</emphasis> use <option>-x</option>.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--no-hostname</option></term>
<listitem><para>Don't show the hostname field of log messages originating from the local host. This
switch has an effect only on the <option>short</option> family of output modes (see above).</para>
<para>Note: this option does not remove occurrences of the hostname from log entries themselves, so
it does not prevent the hostname from being visible in the logs.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--no-full</option></term>
<term><option>--full</option></term>
<term><option>-l</option></term>
<listitem><para>Ellipsize fields when they do not fit in available columns. The default is to show
full fields, allowing them to wrap or be truncated by the pager, if one is used.</para>
<para>The old options <option>-l</option>/<option>--full</option> are not useful anymore, except to
undo <option>--no-full</option>.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-a</option></term>
<term><option>--all</option></term>
<listitem><para>Show all fields in full, even if they include unprintable characters or are very
long. By default, fields with unprintable characters are abbreviated as "blob data". (Note that the
pager may escape unprintable characters again.)</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-f</option></term>
<term><option>--follow</option></term>
<listitem><para>Show only the most recent journal entries, and continuously print new entries as
they are appended to the journal.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--no-tail</option></term>
<listitem><para>Show all stored output lines, even in follow mode. Undoes the effect of
<option>--lines=</option>.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-q</option></term>
<term><option>--quiet</option></term>
<listitem><para>Suppresses all informational messages (i.e. "-- Journal begins at …", "-- Reboot
--"), any warning messages regarding inaccessible system journals when run as a normal
user.</para></listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Pager Control Options</title>
<para>The following options control page support:</para>
<variablelist>
<xi:include href="standard-options.xml" xpointer="no-pager" />
<varlistentry>
<term><option>-e</option></term>
<term><option>--pager-end</option></term>
<listitem><para>Immediately jump to the end of the journal inside the implied pager tool. This
implies <option>-n1000</option> to guarantee that the pager will not buffer logs of unbounded
size. This may be overridden with an explicit <option>-n</option> with some other numeric value,
while <option>-nall</option> will disable this cap. Note that this option is only supported for
the <citerefentry
project='man-pages'><refentrytitle>less</refentrytitle><manvolnum>1</manvolnum></citerefentry>
pager.</para></listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Forward Secure Sealing (FSS) Options</title>
<para>The following options may be used together with the <option>--setup-keys</option> command described
below:</para>
<variablelist>
<varlistentry>
<term><option>--interval=</option></term>
<listitem><para>Specifies the change interval for the sealing key when generating an FSS key pair
with <option>--setup-keys</option>. Shorter intervals increase CPU consumption but shorten the time
range of undetectable journal alterations. Defaults to 15min.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--verify-key=</option></term>
<listitem><para>Specifies the FSS verification key to use for the <option>--verify</option>
operation.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--force</option></term>
<listitem><para>When <option>--setup-keys</option> is passed and Forward Secure Sealing (FSS) has
already been configured, recreate FSS keys.</para></listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Commands</title>
<para>The following commands are understood. If none is specified the default is to display journal records.</para>
<variablelist>
<varlistentry>
<term><option>-N</option></term>
<term><option>--fields</option></term>
<listitem><para>Print all field names currently used in all entries of the journal.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>-F</option></term>
<term><option>--field=</option></term>
<listitem><para>Print all possible data values the specified field can take in all entries of the
journal.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--list-boots</option></term>
<listitem><para>Show a tabular list of boot numbers (relative to the current boot), their IDs, and
the timestamps of the first and last message pertaining to the boot.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--disk-usage</option></term>
<listitem><para>Shows the current disk usage of all journal files. This shows the sum of the disk
usage of all archived and active journal files.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--vacuum-size=</option></term>
<term><option>--vacuum-time=</option></term>
<term><option>--vacuum-files=</option></term>
<listitem><para>Removes the oldest archived journal files until the disk space they use falls below
the specified size (specified with the usual <literal>K</literal>, <literal>M</literal>,
<literal>G</literal> and <literal>T</literal> suffixes), or all archived journal files contain no
data older than the specified timespan (specified with the usual <literal>s</literal>,
<literal>m</literal>, <literal>h</literal>, <literal>days</literal>, <literal>months</literal>,
<literal>weeks</literal> and <literal>years</literal> suffixes), or no more than the specified
number of separate journal files remain. Note that running <option>--vacuum-size=</option> has only
an indirect effect on the output shown by <option>--disk-usage</option>, as the latter includes
active journal files, while the vacuuming operation only operates on archived journal
files. Similarly, <option>--vacuum-files=</option> might not actually reduce the number of journal
files to below the specified number, as it will not remove active journal files.</para>
<para><option>--vacuum-size=</option>, <option>--vacuum-time=</option> and
<option>--vacuum-files=</option> may be combined in a single invocation to enforce any combination
of a size, a time and a number of files limit on the archived journal files. Specifying any of
these three parameters as zero is equivalent to not enforcing the specific limit, and is thus
redundant.</para>
<para>These three switches may also be combined with <option>--rotate</option> into one command. If
so, all active files are rotated first, and the requested vacuuming operation is executed right
after. The rotation has the effect that all currently active files are archived (and potentially new,
empty journal files opened as replacement), and hence the vacuuming operation has the greatest effect
as it can take all log data written so far into account.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--verify</option></term>
<listitem><para>Check the journal file for internal consistency. If the file has been generated
with FSS enabled and the FSS verification key has been specified with
<option>--verify-key=</option>, authenticity of the journal file is verified.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--sync</option></term>
<listitem><para>Asks the journal daemon to write all yet unwritten journal data to the backing file
system and synchronize all journals. This call does not return until the synchronization operation
is complete. This command guarantees that any log messages written before its invocation are safely
stored on disk at the time it returns.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--relinquish-var</option></term>
<listitem><para>Asks the journal daemon for the reverse operation to <option>--flush</option>: if
requested the daemon will write further log data to <filename>/run/log/journal/</filename> and
stops writing to <filename>/var/log/journal/</filename>. A subsequent call to
<option>--flush</option> causes the log output to switch back to
<filename>/var/log/journal/</filename>, see above.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--smart-relinquish-var</option></term>
<listitem><para>Similar to <option>--relinquish-var</option>, but executes no operation if the root
file system and <filename>/var/lib/journal/</filename> reside on the same mount point. This operation
is used during system shutdown in order to make the journal daemon stop writing data to
<filename>/var/log/journal/</filename> in case that directory is located on a mount point that needs
to be unmounted.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--flush</option></term>
<listitem><para>Asks the journal daemon to flush any log data stored in
<filename>/run/log/journal/</filename> into <filename>/var/log/journal/</filename>, if persistent
storage is enabled. This call does not return until the operation is complete. Note that this call is
idempotent: the data is only flushed from <filename>/run/log/journal/</filename> into
<filename>/var/log/journal/</filename> once during system runtime (but see
<option>--relinquish-var</option> below), and this command exits cleanly without executing any
operation if this has already happened. This command effectively guarantees that all data is flushed
to <filename>/var/log/journal/</filename> at the time it returns.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--rotate</option></term>
<listitem><para>Asks the journal daemon to rotate journal files. This call does not return until
the rotation operation is complete. Journal file rotation has the effect that all currently active
journal files are marked as archived and renamed, so that they are never written to in future. New
(empty) journal files are then created in their place. This operation may be combined with
<option>--vacuum-size=</option>, <option>--vacuum-time=</option> and
<option>--vacuum-file=</option> into a single command, see above.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--header</option></term>
<listitem><para>Instead of showing journal contents, show internal header information of the
journal fields accessed.</para>
<para>This option is particularly useful when trying to identify out-of-order journal entries, as
happens for example when the machine is booted with the wrong system time.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--list-catalog <optional><replaceable>128-bit-ID…</replaceable></optional></option></term>
<listitem><para>List the contents of the message catalog as a table of message IDs, plus their
short description strings.</para>
<para>If any <replaceable>128-bit-ID</replaceable>s are specified, only those entries are
shown.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--dump-catalog <optional><replaceable>128-bit-ID…</replaceable></optional></option></term>
<listitem><para>Show the contents of the message catalog, with entries separated by a line
consisting of two dashes and the ID (the format is the same as <filename>.catalog</filename>
files).</para>
<para>If any <replaceable>128-bit-ID</replaceable>s are specified, only those entries are
shown.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--update-catalog</option></term>
<listitem><para>Update the message catalog index. This command needs to be executed each time new
catalog files are installed, removed, or updated to rebuild the binary catalog
index.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--setup-keys</option></term>
<listitem><para>Instead of showing journal contents, generate a new key pair for Forward Secure
Sealing (FSS). This will generate a sealing key and a verification key. The sealing key is stored in
the journal data directory and shall remain on the host. The verification key should be stored
externally. Refer to the <option>Seal=</option> option in
<citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
information on Forward Secure Sealing and for a link to a refereed scholarly paper detailing the
cryptographic theory it is based on.</para></listitem>
</varlistentry>
<xi:include href="standard-options.xml" xpointer="help" />
<xi:include href="standard-options.xml" xpointer="version" />
</variablelist>
</refsect1>
<refsect1>
<title>Exit status</title>
<para>On success, 0 is returned; otherwise, a non-zero failure code is returned.</para>
</refsect1>
<xi:include href="common-variables.xml" />
<refsect1>
<title>Examples</title>
<para>Without arguments, all collected logs are shown unfiltered:</para>
<programlisting>journalctl</programlisting>
<para>With one match specified, all entries with a field matching the expression are shown:</para>
<programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service
journalctl _SYSTEMD_CGROUP=/user.slice/user-42.slice/session-c1.scope</programlisting>
<para>If two different fields are matched, only entries matching both expressions at the same time are
shown:</para>
<programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service _PID=28097</programlisting>
<para>If two matches refer to the same field, all entries matching either expression are shown:</para>
<programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service _SYSTEMD_UNIT=dbus.service</programlisting>
<para>If the separator <literal>+</literal> is used, two expressions may be combined in a logical OR. The
following will show all messages from the Avahi service process with the PID 28097 plus all messages from
the D-Bus service (from any of its processes):</para>
<programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service _PID=28097 + _SYSTEMD_UNIT=dbus.service</programlisting>
<para>To show all fields emitted <emphasis>by</emphasis> a unit and <emphasis>about</emphasis> the unit,
option <option>-u</option>/<option>--unit=</option> should be used. <command>journalctl -u
<replaceable>name</replaceable></command> expands to a complex filter similar to
<programlisting>_SYSTEMD_UNIT=<replaceable>name</replaceable>.service
+ UNIT=<replaceable>name</replaceable>.service _PID=1
+ OBJECT_SYSTEMD_UNIT=<replaceable>name</replaceable>.service _UID=0
+ COREDUMP_UNIT=<replaceable>name</replaceable>.service _UID=0 MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1</programlisting>
(see
<citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>
for an explanation of those patterns).</para>
<para>Show all logs generated by the D-Bus executable:</para>
<programlisting>journalctl /usr/bin/dbus-daemon</programlisting>
<para>Show all kernel logs from previous boot:</para>
<programlisting>journalctl -k -b -1</programlisting>
<para>Show a live log display from a system service <filename>apache.service</filename>:</para>
<programlisting>journalctl -f -u apache</programlisting>
</refsect1>
<refsect1>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd-cat</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>coredumpctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd-journal-remote.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd-journal-upload.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
</para>
</refsect1>
</refentry>