systemd/TODO
Zach Smith 28ca9c2499 systemd-sleep: refactor sleep config parsing
remove verb from parse

refactor required fields checks

refactor allow settings
2019-05-30 06:06:16 -07:00

1092 lines
51 KiB
Plaintext

Bugfixes:
* Many manager configuration settings that are only applicable to user
manager or system manager can be always set. It would be better to reject
them when parsing config.
* busctl --user call org.freedesktop.systemd1 /org/freedesktop/systemd1 org.freedesktop.systemd1.Manager GetUnitProcesses "s" run-rbff1b85427b34ba3adf864281aeda8e7.service
Failed to set address: No such file or directory
→ improve error message
External:
* Fedora: add an rpmlint check that verifies that all unit files in the RPM are listed in %systemd_post macros.
* wiki: update journal format documentation for lz4 additions
Janitorial Clean-ups:
* Rearrange tests so that the various test-xyz.c match a specific src/basic/xyz.c again
* rework mount.c and swap.c to follow proper state enumeration/deserialization
semantics, like we do for device.c now
Features:
* when killing due to service watchdog timeout maybe detect whether target
process is under ptracing and then log loudly and continue instead.
* tweak journald context caching. In addition to caching per-process attributes
keyed by PID, cache per-cgroup attributes (i.e. the various xattrs we read)
keyed by cgroup path, and guarded by ctime changes. This should provide us
with a nice speed-up on services that have many processes running in the same
cgroup.
* clean up sleep.c:
- Make sure resume= and resume_offset= on the kernel cmdline always take
precedence
* make MAINPID= message reception checks even stricter: if service uses User=,
then check sending UID and ignore message if it doesn't match the user or
root.
* maybe trigger a uevent "change" on a device if "systemctl reload xyz.device"
is issued.
* when importing an fs tree with machined, optionally apply userns-rec-chown
* when importing an fs tree with machined, complain if image is not an OS
* Maybe introduce a helper safe_exec() or so, which is to execve() which
safe_fork() is to fork(). And then make revert the RLIMIT_NOFILE soft limit
to 1K implicitly, unless explicitly opted-out.
* rework seccomp/nnp logic that that even if User= is used in combination with
a seccomp option we don't have to set NNP. For that, change uid first whil
keeping CAP_SYS_ADMIN, then apply seccomp, the drop cap.
* add a concept for automatically loading per-unit secrets off disk and
inserting them into the kernel keyring. Maybe SecretsDirectory= similar to
ConfigurationDirectory=.
* when no locale is configured, default to UEFI's PlatformLang variable
* When logind.conf contains HandleLidSwitch=suspend-then-hibernate and we can't
hibernate because the swap partition isn't large enough, still suspend
* bootctl,sd-boot: actually honour the "architecture" key
* add a new syscall group "@esoteric" for more esoteric stuff such as bpf() and
usefaultd() and make systemd-analyze check for it.
* paranoia: whenever we process passwords, call mlock() on the memory
first. i.e. look for all places we use string_erase()/string_free_erase() and
augment them with mlock(). Also use MADV_DONTDUMP
* Move RestrictAddressFamily= to the new cgroup create socket
* support the bind/connect/sendmsg cgroup stuff for sandboxing, and possibly
patching around
* maybe implicitly attach monotonic+realtime timestamps to outgoing messages in
log.c and sd-journal-send
* optionally: turn on cgroup delegation for per-session scope units
* introduce per-unit (i.e. per-slice, per-service) journal log size limits.
* optionally, if a per-partition GPT flag is set for the root/home/… partitions
format the partition on next boot and unset the flag, in order to implement
factory reset. also, add a second flag that simply indicates whether such a
scheme is supported. then, add a tool (or maybe beef up systemd-dissect) to
show state of these flags, and optionally trigger such a factory reset on
next boot by setting the flag.
* sd-boot: automatically load EFI modules from some drop-in dir, so that people
can add in file system drivers and such
* sd-boot: optionally, show boot menu when previous default boot item has
non-zero "tries done" count
* maybe set a special xattr on cgroups that have delegate=yes set, to make it
easy to mark cut points
* introduce an option (or replacement) for "systemctl show" that outputs all
properties as JSON, similar to busctl's new JSON output. In contrast to that
it should skip the variant type string though.
* augment CODE_FILE=, CODE_LINE= with something like CODE_BASE= or so which
contains some identifier for the project, which allows us to include
clickable links to source files generating these log messages. The identifier
could be some abberviated URL prefix or so (taking inspiration from Go
imports). For example, for systemd we could use
CODE_BASE=github.com/systemd/systemd/blob/98b0b1123cc or so which is
sufficient to build a link by prefixing "http://" and suffixing the
CODE_FILE.
* when outputting log data with journalctl and the log data includes references
to configuration files (CONFIG_FILE=), create a clickable link for it.
* Augment MESSAGE_ID with MESSAGE_BASE, in a similar fashion so that we can
make clickable links from log messages carrying a MESSAGE_ID, that lead to
some explanatory text online.
* maybe extend .path units to expose fanotify() per-mount change events
* Add a "systemctl list-units --by-slice" mode or so, which rearranges the
output of "systemctl list-units" slightly by showing the tree structure of
the slices, and the units attached to them.
* the a-posteriori stopping of units bound to units that disappeared logic
should be reworked: there should be a queue of units, and we should only
enqeue stop jobs from a defer event that processes queue instead of
right-away when we find a unit that is bound to one that doesn't exist
anymore. (similar to how the stop-unneeded queue has been reworked the same
way)
* nspawn: make nspawn suitable for shell pipelines: instead of triggering a
hangup when input is finished, send ^D, which synthesizes an EOF. Then wait
for hangup or ^D before passing on the EOF.
* When reloading configuration PID 1 should reset all its properties to the
original defaults before calling parse_config()
* nspawn: greater control over selinux label?
* hibernate/s2h: make this robust and safe to enable in Fedora by default.
Specifically:
1. add resume_offset support to the resume code (i.e. support swap files
properly)
2. check if swap is on weird storage and refuse if so
3. add autodetection of hibernation images
* cgroups: use inotify to get notified when somebody else modifies cgroups
owned by us, then log a friendly warning.
* beef up log.c with support for stripping ANSI sequences from strings, so that
it is OK to include them in log strings. This would be particularly useful so
that our log messages could contain clickable links for example for unit
files and suchlike we operate on.
* add support for "portablectl attach http://foobar.com/waaa.raw (i.e. importd integration)
* add attach --enable and attach --now (for attach+enable+start)
* sync dynamic uids/gids between host+portable srvice (i.e. if DynamicUser=1 is set for a service, make sure that the
selected user is resolvable in the service even if it ships its own /etc/passwd)
* Fix DECIMAL_STR_MAX or DECIMAL_STR_WIDTH. One includes a trailing NUL, the
other doesn't. What a disaster. Probably to exclude it. Also
DECIMAL_STR_WIDTH should probably add an extra "-" into account for negative
numbers.
* Check that users of inotify's IN_DELETE_SELF flag are using it properly, as
usually IN_ATTRIB is the right way to watch deleted files, as the former only
fires when a file is actually removed from disk, i.e. the link count drops to
zero and is not open anymore, while the latter happens when a file is
unlinked from any dir.
* port systemctl, busctl, … over to format-table.[ch]'s table formatters
* pid1: lock image configured with RootDirectory=/RootImage= using the usual nspawn semantics while the unit is up
* add --vacuum-xyz options to coredumpctl, matching those journalctl already has.
* SuccessExitStatus= and friends should probably also accept symbolic exit
codes names, i.e. error codes from the list maintained in exit-codes.[ch]
* introduce Ephemeral= unit file switch, that creates an ephemeral copy of all
files and directories that are left writable for a unit, and which are
removed after the unit goes down again. A bit like --ephemeral for
systemd-nspawn but for system services. If used together with RootImage= this
should reflink the image file itself.
Related: add Ephemeral=<path1> <path2> … which would allow marking
specific paths only like this.
* add CopyFile= or so as unit file setting that may be used to copy files or
directory trees from the host to the services RootImage= and RootDirectory=
environment. Which we can use for /etc/machine-id and in particular
/etc/resolv.conf. Should be smart and do something useful on read-only
images, for example fallback to read-only bind mounting the file instead.
* nspawn's console TTY should be allocated from within the container, not
mounted in from the outside
* show invocation ID in systemd-run output
* bypass SIGTERM state in unit files if KillSignal is SIGKILL
* tree-wide: ensure we always block the signals we hook into with
sd_event_add_signal() first
* add proper dbus APIs for the various sd_notify() commands, such as MAINPID=1
and so on, which would mean we could report errors and such.
* teach tmpfiles.d q/Q logic something sensible in the context of XFS/ext4
project quota
* introduce DefaultSlice= or so in system.conf that allows changing where we
place our units by default, i.e. change system.slice to something
else. Similar, ManagerSlice= should exist so that PID1's own scope unit could
be moved somewhere else too. Finally machined and logind should get similar
options so that it is possible to move user session scopes and machines to a
different slice too by default. Usecase: people who want to put resources on
the entire system, with the exception of one specific service. See:
https://lists.freedesktop.org/archives/systemd-devel/2018-February/040369.html
* maybe rework get_user_creds() to query the user database if $SHELL is used
for root, but only then.
* be stricter with fds we receive for the fdstore: close them asynchronously
* calenderspec: add support for week numbers and day numbers within a
year. This would allow us to define "bi-weekly" triggers safely.
* sd-bus: add vtable flag, that may be used to request client creds implicitly
and asynchronously before dispatching the operation
* make use of ethtool veth peer info in machined, for automatically finding out
host-side interface pointing to the container.
* add some special mode to LogsDirectory=/StateDirectory=… that allows
declaring these directories without necessarily pulling in deps for them, or
creating them when starting up. That way, we could declare that
systemd-journald writes to /var/log/journal, which could be useful when we
doing disk usage calculations and so on.
* taint systemd if there are fewer than 65536 users assigned (userns) to the system.
* deprecate RootDirectoryStartOnly= in favour of a new ExecStart= prefix char
* add a new RuntimeDirectoryPreserve= mode that defines a similar lifecycle for
the runtime dir as we maintain for the fdstore: i.e. keep it around as long
as the unit is running or has a job queued.
* support projid-based quota in machinectl for containers
* maybe use SOURCE_DATE_EPOCH (i.e. the env var the reproducible builds folks
introduced) as the RTC epoch, instead of the mtime of NEWS.
* add a way to lock down cgroup migration: a boolean, which when set for a unit
makes sure the processes in it can never migrate out of it
* blog about fd store and restartable services
* document Environment=SYSTEMD_LOG_LEVEL=debug drop-in in debugging document
* rework ExecOutput and ExecInput enums so that EXEC_OUTPUT_NULL loses its
magic meaning and is no longer upgraded to something else if set explicitly.
* in the long run: permit a system with /etc/machine-id linked to /dev/null, to
make it lose its identity, i.e. be anonymous. For this we'd have to patch
through the whole tree to make all code deal with the case where no machine
ID is available.
* optionally, collect cgroup resource data, and store it in per-unit RRD files,
suitable for processing with rrdtool. Add bus API to access this data, and
possibly implement a CPULoad property based on it.
* beef up pam_systemd to take unit file settings such as cgroups properties as
parameters
* maybe hook of xfs/ext4 quotactl() with services? i.e. automatically manage
the quota of a the user indicated in User= via unit file settings, like the
other resource management concepts. Would mix nicely with DynamicUser=1. Or
alternatively, do this with projids, so that we can also cover services
running as root. Quota should probably cover all the special dirs such as
StateDirectory=, LogsDirectory=, CacheDirectory=, as well as RootDirectory= if it
is set, plus the whole disk space any image configured with RootImage=.
* In DynamicUser= mode: before selecting a UID, use disk quota APIs on relevant
disks to see if the UID is already in use.
* add "systemctl wait" or so, which does what "systemd-run --wait" does, but
for all units. It should be both a way to pin units into memory as well as a
wait to retrieve their exit data.
* expose IO accounting data on the bus, show it in systemd-run --wait and log
about it in the resource log message
* add "systemctl purge" for flushing out configuration, state, logs, ... of a
unit when it is stopped
* show whether a service has out-of-date configuration in "systemctl status" by
using mtime data of ConfigurationDirectory=.
* replace all remaining uses of fgets() + LINE_MAX by read_line()
* Add AddUser= setting to unit files, similar to DynamicUser=1 which however
creates a static, persistent user rather than a dynamic, transient user. We
can leverage code from sysusers.d for this.
* add some optional flag to ReadWritePaths= and friends, that has the effect
that we create the dir in question when the service is started. Example:
ReadWritePaths=:/var/lib/foobar
* maybe add call sd_journal_set_block_timeout() or so to set SO_SNDTIMEO for
the sd-journal logging socket, and, if the timeout is set to 0, sets
O_NONBLOCK on it. That way people can control if and when to block for
logging.
* hostnamed: populate form factor data from a new hwdb database, so that old
yogas can be recognized as "convertible" too, even if they predate the DMI
"convertible" form factor
* Maybe add a small tool invoked early at boot, that adds in or resizes
partitions automatically, to be used when the media used is actually larger
than the image written onto it is.
* Maybe add PrivatePIDs= as new unit setting, and do minimal PID namespacing
after all. Be strict however, only support the equivalent of nspawn's
--as-pid2 switch, and sanely proxy sd_notify() messages dropping stuff such
as MAINPID.
* Add ExecMonitor= setting. May be used multiple times. Forks off a process in
the service cgroup, which is supposed to monitor the service, and when it
exits the service is considered failed by its monitor.
* track the per-service PAM process properly (i.e. as an additional control
process), so that it may be queried on the bus and everything.
* add a new "debug" job mode, that is propagated to unit_start() and for
services results in two things: we raise SIGSTOP right before invoking
execve() and turn off watchdog support. Then, use that to implement
"systemd-gdb" for attaching to the start-up of any system service in its
natural habitat.
* maybe introduce gpt auto discovery for /var/tmp?
* maybe add gpt-partition-based user management: each user gets his own
LUKS-encrypted GPT partition with a new GPT type. A small nss module
enumerates users via udev partition enumeration. UIDs are assigned in a fixed
way: the partition index is added as offset to some fixed base uid. User name
is stored in GPT partition name. A PAM module authenticates the user via the
LUKS partition password. Benefits: strong per-user security, compatibility
with stateless/read-only/verity-enabled root. (other idea: do this based on
loopback files in /home, without GPT involvement)
* gpt-auto logic: introduce support for discovering /var matching an image. For
that, use a partition type UUID that is hashed from the OS name (as encoded
in /etc/os-release), the architecture, and 4 new bits from the gpt flags
field of the root partition. This way can easily support multiple OS
installations on the same GPT partition table, without problems with
unmatched /var partitions.
* gpt-auto logic: related to the above, maybe support a "secondary" root
partition, that is mounted to / and is writable, and where the actual root's
/usr is mounted into.
* gpt-auto logic: support encrypted swap, add kernel cmdline option to force it, and honour a gpt bit about it, plus maybe a configuration file
* drop nss-myhostname in favour of nss-resolve?
* add a percentage syntax for TimeoutStopSec=, e.g. TimeoutStopSec=150%, and
then use that for the setting used in user@.service. It should be understood
relative to the configured default value.
* in networkd, when matching device types, fix up DEVTYPE rubbish the kernel passes to us
* enable LockMLOCK to take a percentage value relative to physical memory
* Permit masking specific netlink APIs with RestrictAddressFamily=
* nspawn: support that /proc, /sys/, /dev are pre-mounted
* define gpt header bits to select volatility mode
* ProtectKernelLogs= (drops CAP_SYSLOG, add seccomp for syslog() syscall, and DeviceAllow to /dev/kmsg) in service files
* ProtectClock= (drops CAP_SYS_TIMES, adds seecomp filters for settimeofday, adjtimex), sets DeviceAllow o /dev/rtc
* ProtectTracing= (drops CAP_SYS_PTRACE, blocks ptrace syscall, makes /sys/kernel/tracing go away)
* ProtectMount= (drop mount/umount/pivot_root from seccomp, disallow fuse via DeviceAllow, imply Mountflags=slave)
* ProtectKeyRing= to take keyring calls away
* RemoveKeyRing= to remove all keyring entries of the specified user
* ProtectReboot= that masks reboot() and kexec_load() syscalls, prohibits kill
on PID 1 with the relevant signals, and makes relevant files in /sys and
/proc (such as the sysrq stuff) unavailable
* make sure the ratelimit object can deal with USEC_INFINITY as way to turn off things
* journalctl: make sure -f ends when the container indicated by -M terminates
* mount: automatically search for "main" partition of an image has multiple
partitions
* expose the "privileged" flag of ExecCommand on the bus, and open it up to
transient units
* in nss-systemd, if we run inside of RootDirectory= with PrivateUsers= set,
find a way to map the User=/Group= of the service to the right name. This way
a user/group for a service only has to exist on the host for the right
mapping to work.
* add bus API for creating unit files in /etc, reusing the code for transient units
* add bus API to remove unit files from /etc
* add bus API to retrieve current unit file contents (i.e. implement "systemctl cat" on the bus only)
* rework fopen_temporary() to make use of open_tmpfile_linkable() (problem: the
kernel doesn't support linkat() that replaces existing files, currently)
* transient units: don't bother with actually setting unit properties, we
reload the unit file anyway
* journald: sigbus API via a signal-handler safe function that people may call
from the SIGBUS handler
* optionally, also require WATCHDOG=1 notifications during service start-up and shutdown
* delay activation of logind until somebody logs in, or when /dev/tty0 pulls it
in or lingering is on (so that containers don't bother with it until PAM is used). also exit-on-idle
* cache sd_event_now() result from before the first iteration...
* add systemctl stop --job-mode=triggering that follows TRIGGERED_BY deps and adds them to the same transaction
* PID1: find a way how we can reload unit file configuration for
specific units only, without reloading the whole of systemd
* add an explicit parser for LimitRTPRIO= that verifies
the specified range and generates sane error messages for incorrect
specifications.
* when we detect that there are waiting jobs but no running jobs, do something
* push CPUAffinity= also into the "cpuset" cgroup controller (only after the cpuset controller got ported to the unified hierarchy)
* PID 1 should send out sd_notify("WATCHDOG=1") messages (for usage in the --user mode, and when run via nspawn)
* there's probably something wrong with having user mounts below /sys,
as we have for debugfs. for example, src/core/mount.c handles mounts
prefixed with /sys generally special.
http://lists.freedesktop.org/archives/systemd-devel/2015-June/032962.html
* fstab-generator: default to tmpfs-as-root if only usr= is specified on the kernel cmdline
* docs: bring http://www.freedesktop.org/wiki/Software/systemd/MyServiceCantGetRealtime up to date
* add a job mode that will fail if a transaction would mean stopping
running units. Use this in timedated to manage the NTP service
state.
http://lists.freedesktop.org/archives/systemd-devel/2015-April/030229.html
* The udev blkid built-in should expose a property that reflects
whether media was sensed in USB CF/SD card readers. This should then
be used to control SYSTEMD_READY=1/0 so that USB card readers aren't
picked up by systemd unless they contain a medium. This would mirror
the behaviour we already have for CD drives.
* networkd/udev: implement SR_IOV configuration in .link files:
http://lists.freedesktop.org/archives/systemd-devel/2015-January/027451.html
* hostnamectl: show root image uuid
* Find a solution for SMACK capabilities stuff:
http://lists.freedesktop.org/archives/systemd-devel/2014-December/026188.html
* "systemctl preset-all" should probably order the unit files it
operates on lexicographically before starting to work, in order to
ensure deterministic behaviour if two unit files conflict (like DMs
do, for example)
* synchronize console access with BSD locks:
http://lists.freedesktop.org/archives/systemd-devel/2014-October/024582.html
* as soon as we have sender timestamps, revisit coalescing multiple parallel daemon reloads:
http://lists.freedesktop.org/archives/systemd-devel/2014-December/025862.html
* in systemctl list-unit-files: show the install value the presets would suggest for a service in a third column
* figure out when we can use the coarse timers
* add "systemctl start -v foobar.service" that shows logs of a service
while the start command runs. This is non-trivial to do without
races though, since we should flush out all journal messages before
returning from the "systemctl stop".
* firstboot: make it useful to be run immediately after yum --installroot to set up a machine. (most specifically, make --copy-root-password work even if /etc/passwd already exists
* maybe add support for specifier expansion in user.conf, specifically DefaultEnvironment=
* consider showing the unit names during boot up in the status output, not just the unit descriptions
* maybe allow timer units with an empty Units= setting, so that they
can be used for resuming the system but nothing else.
* what to do about udev db binary stability for apps? (raw access is not an option)
* man: maybe use the word "inspect" rather than "introspect"?
* systemctl: if some operation fails, show log output?
* systemctl edit: use equivalent of cat() to insert existing config as a comment, prepended with #.
Upon editor exit, lines with one # are removed, lines with two # are left with one #, etc.
* exponential backoff in timesyncd when we cannot reach a server
* timesyncd: add ugly bus calls to set NTP servers per-interface, for usage by NM
* merge ~/.local/share and ~/.local/lib into one similar /usr/lib and /usr/share....
* systemd.show_status= should probably have a mode where only failed
units are shown.
* add systemd.abort_on_kill or some other such flag to send SIGABRT instead of SIGKILL
(throughout the codebase, not only PID1)
* resolved:
- mDNS/DNS-SD
- service registration
- service/domain/types browsing
- avahi compat
- DNS-SD service registration from socket units
- resolved should optionally register additional per-interface LLMNR
names, so that for the container case we can establish the same name
(maybe "host") for referencing the server, everywhere.
- allow clients to request DNSSEC for a single lookup even if DNSSEC is off (?)
- hook up resolved with machined-based address resolution
* refcounting in sd-resolve is borked
* Add a new verb "systemctl top"
* add new gpt type for btrfs volumes
* support empty /etc boots nicely:
- nspawn/gpt-generator: introduce new gpt partition type for /usr
* generator that automatically discovers btrfs subvolumes, identifies their purpose based on some xattr on them.
* a way for container managers to turn off getty starting via $container_headless= or so...
* figure out a nice way how we can let the admin know what child/sibling unit causes cgroup membership for a specific unit
* For timer units: add some mechanisms so that timer units that trigger immediately on boot do not have the services
they run added to the initial transaction and thus confuse Type=idle.
* add bus api to query unit file's X fields.
* gpt-auto-generator:
- Define new partition type for encrypted swap? Support probed LUKS for encrypted swap?
- Make /home automount rather than mount?
* add generator that pulls in systemd-network from containers when
CAP_NET_ADMIN is set, more than the loopback device is defined, even
when it is otherwise off
* MessageQueueMessageSize= (and suchlike) should use parse_iec_size().
* implement Distribute= in socket units to allow running multiple
service instances processing the listening socket, and open this up
for ReusePort=
* introduce bus call FreezeUnit(s, b), as well as "systemctl freeze
$UNIT" and "systemctl thaw $UNIT" as wrappers around this. The calls
should SIGSTOP all unit processes in a loop until all processes of
it are fully stopped. This can later be used for app management by
desktop UIs such as gnome-shell to freeze apps that are not visible
on screen, not unlike how job control works on the shell
* cgroups:
- implement per-slice CPUFairScheduling=1 switch
- introduce high-level settings for RT budget, swappiness
- how to reset dynamically changed unit cgroup attributes sanely?
- when reloading configuration, apply new cgroup configuration
- when recursively showing the cgroup hierarchy, optionally also show
the hierarchies of child processes
* transient units:
- add field to transient units that indicate whether systemd or somebody else saves/restores its settings, for integration with libvirt
* Automatically configure swap partition to use for hibernation by looking for largest swap partition on the root disk?
* when we detect low battery and no AC on boot, show pretty splash and refuse boot
* libsystemd-journal, libsystemd-login, libudev: add calls to easily attach these objects to sd-event event loops
* be more careful what we export on the bus as (usec_t) 0 and (usec_t) -1
* rfkill,backlight: we probably should run the load tools inside of the udev rules so that the state is properly initialized by the time other software sees it
* After coming back from hibernation reset hibernation swap partition using the /dev/snapshot ioctl APIs
* If we try to find a unit via a dangling symlink, generate a clean
error. Currently, we just ignore it and read the unit from the search
path anyway.
* refuse boot if /usr/lib/os-release is missing or /etc/machine-id cannot be set up
* man: the documentation of Restart= currently is very misleading and suggests the tools from ExecStartPre= might get restarted.
* load .d/*.conf dropins for device units
* sd-bus:
- EBADSLT handling
- GetAllProperties() on a non-existing object does not result in a failure currently
- port to sd-resolve for connecting to TCP dbus servers
- see if we can introduce a new sd_bus_get_owner_machine_id() call to retrieve the machine ID of the machine of the bus itself
- see if we can drop more message validation on the sending side
- add API to clone sd_bus_message objects
- longer term: priority inheritance
- dbus spec updates:
- NameLost/NameAcquired obsolete
- GVariant
- path escaping
- update systemd.special(7) to mention that dbus.socket is only about the compatibility socket now
* sd-event
- allow multiple signal handlers per signal?
- document chaining of signal handler for SIGCHLD and child handlers
- define more intervals where we will shift wakeup intervals around in, 1h, 6h, 24h, ...
- generate a failure of a default event loop is executed out-of-thread
* investigate endianness issues of UUID vs. GUID
* dbus: when a unit failed to load (i.e. is in UNIT_ERROR state), we
should be able to safely try another attempt when the bus call LoadUnit() is invoked.
* add a pam module that passes the hdd passphrase into the PAM stack and then expires it, for usage by gdm auto-login.
* add a pam module that on password changes updates any LUKS slot where the password matches
* test/:
- add unit tests for config_parse_device_allow()
* seems that when we follow symlinks to units we prefer the symlink
destination path over /etc and /usr. We should not do that. Instead
/etc should always override /run+/usr and also any symlink
destination.
* when isolating, try to figure out a way how we implicitly can order
all units we stop before the isolating unit...
* teach ConditionKernelCommandLine= globs or regexes (in order to match foobar={no,0,off})
* BootLoaderSpec: Clarify that the kernel has to be in $BOOT. Clarify
that the boot loader should be installed to the ESP. Define a way
how an installer can figure out whether a BLS compliant boot loader
is installed.
* think about requeuing jobs when daemon-reload is issued? usecase:
the initrd issues a reload after fstab from the host is accessible
and we might want to requeue the mounts local-fs acquired through
that automatically.
* systemd-inhibit: make taking delay locks useful: support sending SIGINT or SIGTERM on PrepareForSleep()
* remove any syslog support from log.c — we probably cannot do this before split-off udev is gone for good
* shutdown logging: store to EFI var, and store to USB stick?
* merge unit_kill_common() and unit_kill_context()
* introduce ExecCondition= in services
* EFI:
- honor language efi variables for default language selection (if there are any?)
- honor timezone efi variables for default timezone selection (if there are any?)
- change bootctl to be backed by systemd-bootd to control temporary and persistent default boot goal plus efi variables
* bootctl
- recognize the case when not booted on EFI
* maybe do not install getty@tty1.service symlink in /etc but in /usr?
* print a nicer explanation if people use variable/specifier expansion in ExecStart= for the first word
* mount: turn dependency information from /proc/self/mountinfo into dependency information between systemd units.
* logind:
- logind: optionally, ignore idle-hint logic for autosuspend, block suspend as long as a session is around
- logind: wakelock/opportunistic suspend support
- Add pretty name for seats in logind
- logind: allow showing logout dialog from system?
- add Suspend() bus calls which take timestamps to fix double suspend issues when somebody hits suspend and closes laptop quickly.
- if pam_systemd is invoked by su from a process that is outside of a
any session we should probably just become a NOP, since that's
usually not a real user session but just some system code that just
needs setuid().
- logind: make the Suspend()/Hibernate() bus calls wait for the for
the job to be completed. before returning, so that clients can wait
for "systemctl suspend" to finish to know when the suspending is
complete.
- logind: when the power button is pressed short, just popup a
logout dialog. If it is pressed for 1s, do the usual
shutdown. Inspiration are Macs here.
- expose "Locked" property on logind sesison objects
- maybe allow configuration of the StopTimeout for session scopes
- rename session scope so that it includes the UID. THat way
the session scope can be arranged freely in slices and we don't have
make assumptions about their slice anymore.
- follow PropertiesChanged state more closely, to deal with quick logouts and
relogins
* journal:
- consider introducing implicit _TTY= + _PPID= + _EUID= + _EGID= + _FSUID= + _FSGID= fields
- import and delete pstore filesystem content at startup
- journald: also get thread ID from client, plus thread name
- journal: when waiting for journal additions in the client always sleep at least 1s or so, in order to minimize wakeups
- add API to close/reopen/get fd for journal client fd in libsystemd-journal.
- fallback to /dev/log based logging in libsystemd-journal, if we cannot log natively?
- declare the local journal protocol stable in the wiki interface chart
- sd-journal: speed up sd_journal_get_data() with transparent hash table in bg
- journald: when dropping msgs due to ratelimit make sure to write
"dropped %u messages" not only when we are about to print the next
message that works, but already after a short timeout
- check if we can make journalctl by default use --follow mode inside of less if called without args?
- maybe add API to send pairs of iovecs via sd_journal_send
- journal: add a setgid "systemd-journal" utility to invoke from libsystemd-journal, which passes fds via STDOUT and does PK access
- journactl: support negative filtering, i.e. FOOBAR!="waldo",
and !FOOBAR for events without FOOBAR.
- journal: store timestamp of journal_file_set_offline() int he header,
so it is possible to display when the file was last synced.
- journal-send.c, log.c: when the log socket is clogged, and we drop, count this and write a message about this when it gets unclogged again.
- journal: find a way to allow dropping history early, based on priority, other rules
- journal: When used on NFS, check payload hashes
- journald: add kernel cmdline option to disable ratelimiting for debug purposes
- refuse taking lower-case variable names in sd_journal_send() and friends.
- journald: we currently rotate only after MaxUse+MaxFilesize has been reached.
- journal: deal nicely with byte-by-byte copied files, especially regards header
- journal: sanely deal with entries which are larger than the individual file size, but where the components would fit
- Replace utmp, wtmp, btmp, and lastlog completely with journal
- journalctl: instead --after-cursor= maybe have a --cursor=XYZ+1 syntax?
- when a kernel driver logs in a tight loop, we should ratelimit that too.
- journald: optionally, log debug messages to /run but everything else to /var
- journald: when we drop syslog messages because the syslog socket is
full, make sure to write how many messages are lost as first thing
to syslog when it works again.
- change systemd-journal-flush into a service that stays around during
boot, and causes the journal to be moved back to /run on shutdown,
so that we do not keep /var busy. This needs to happen synchronously,
hence doing this via signals is not going to work.
- optionally support running journald from the command line for testing purposes in external projects
- journald: allow per-priority and per-service retention times when rotating/vacuuming
- journald: make use of uid-range.h to managed uid ranges to split
journals in.
- journalctl: add the ability to look for the most recent process of a binary. journalctl /usr/bin/X11 --pid=-1 or so...
- improve journalctl performance by loading journal files
lazily. Encode just enough information in the file name, so that we
do not have to open it to know that it is not interesting for us, for
the most common operations.
- man: document that corrupted journal files is nothing to act on
- rework journald sigbus stuff to use mutex
- Set RLIMIT_NPROC for systemd-journal-xyz, and all other of our
services that run under their own user ids, and use User= (but only
in a world where userns is ubiquitous since otherwise we cannot
invoke those daemons on the host AND in a container anymore). Also,
if LimitNPROC= is used without User= we should warn and refuse
operation.
- journalctl --verify: don't show files that are currently being
written to as FAIL, but instead show that their are being written to.
- add journalctl -H that talks via ssh to a remote peer and passes through
binary logs data
- add a version of --merge which also merges /var/log/journal/remote
- journalctl: -m should access container journals directly by enumerating
them via machined, and also watch containers coming and going.
Benefit: nspawn --ephemeral would start working nicely with the journal.
- assign MESSAGE_ID to log messages about failed services
* add a test if all entries in the catalog are properly formatted.
(Adding dashes in a catalog entry currently results in the catalog entry
being silently skipped. journalctl --update-catalog must warn about this,
and we should also have a unit test to check that all our message are OK.)
* document:
- document that deps in [Unit] sections ignore Alias= fields in
[Install] units of other units, unless those units are disabled
- man: clarify that time-sync.target is not only sysv compat but also useful otherwise. Same for similar targets
- document that service reload may be implemented as service reexec
- add a man page containing packaging guidelines and recommending usage of things like Documentation=, PrivateTmp=, PrivateNetwork= and ReadOnlyDirectories=/etc /usr.
- document systemd-journal-flush.service properly
- documentation: recommend to connect the timer units of a service to the service via Also= in [Install]
- man: document the very specific env the shutdown drop-in tools live in
- man: add more examples to man pages
- man: maybe sort directives in man pages, and take sections from --help and apply them to man too
- document root=gpt-auto properly
* systemctl:
- add systemctl switch to dump transaction without executing it
- Add a verbose mode to "systemctl start" and friends that explains what is being done or not done
- "systemctl disable" on a static unit prints no message and does
nothing. "systemctl enable" does nothing, and gives a bad message
about it. Should fix both to print nice actionable messages.
- print nice message from systemctl --failed if there are no entries shown, and hook that into ExecStartPre of rescue.service/emergency.service
- add new command to systemctl: "systemctl system-reexec" which reexecs as many daemons as virtually possible
- systemctl enable: fail if target to alias into does not exist? maybe show how many units are enabled afterwards?
- systemctl: "Journal has been rotated since unit was started." message is misleading
- systemctl status output should include list of triggering units and their status
* unit install:
- "systemctl mask" should find all names by which a unit is accessible
(i.e. by scanning for symlinks to it) and link them all to /dev/null
* timer units:
- timer units should get the ability to trigger when:
o DST changes
- Modulate timer frequency based on battery state
* add libsystemd-password or so to query passwords during boot using the password agent logic
* clean up date formatting and parsing so that all absolute/relative timestamps we format can also be parsed
* on shutdown: move utmp, wall, audit logic all into PID 1 (or logind?), get rid of systemd-update-utmp-runlevel
* make repeated alt-ctrl-del presses printing a dump
* hostnamed: before returning information from /etc/machine-info.conf check the modification data and reread. Similar for localed, ...
* currently x-systemd.timeout is lost in the initrd, since crypttab is copied into dracut, but fstab is not
* nspawn:
- emulate /dev/kmsg using CUSE and turn off the syslog syscall
with seccomp. That should provide us with a useful log buffer that
systemd can log to during early boot, and disconnect container logs
from the kernel's logs.
- as soon as networkd has a bus interface, hook up --network-interface=,
--network-bridge= with networkd, to trigger netdev creation should an
interface be missing
- a nice way to boot up without machine id set, so that it is set at boot
automatically for supporting --ephemeral. Maybe hash the host machine id
together with the machine name to generate the machine id for the container
- fix logic always print a final newline on output.
https://github.com/systemd/systemd/pull/272#issuecomment-113153176
- should optionally support receiving WATCHDOG=1 messages from its payload
PID 1...
- optionally automatically add FORWARD rules to iptables whenever nspawn is
running, remove them when shut down.
* dissect
- refuse mounting over a mount point
- automatically discover .roothash files in dissect, similarly to nspawn
* machined:
- add an API so that libvirt-lxc can inform us about network interfaces being
removed or added to an existing machine
- "machinectl migrate" or similar to copy a container from or to a
difference host, via ssh
- introduce systemd-nspawn-ephemeral@.service, and hook it into
"machinectl start" with a new --ephemeral switch
- "machinectl status" should also show internal logs of the container in
question
- "machinectl history"
- "machinectl diff"
- "machinectl commit" that takes a writable snapshot of a tree, invokes a
shell in it, and marks it read-only after use
* cryptsetup:
- cryptsetup-generator: allow specification of passwords in crypttab itself
- support rd.luks.allow-discards= kernel cmdline params in cryptsetup generator
* hw watchdog: optionally try to use the preset watchdog timeout instead of always overriding it
https://bugs.freedesktop.org/show_bug.cgi?id=54712
* add a dependency on standard-conf.xml and other included files to man pages
* MountFlags=shared acts as MountFlags=slave right now.
* properly handle loop back mounts via fstab, especially regards to fsck/passno
* initialize the hostname from the fs label of /, if /etc/hostname does not exist?
* udev:
- move to LGPL
- kill scsi_id
- add trigger --subsystem-match=usb/usb_device device
- reimport udev db after MOVE events for devices without dev_t
* There's currently no way to cancel fsck (used to be possible via C-c or c on the console)
* add option to sockets to avoid activation. Instead just drop packets/connections, see http://cyberelk.net/tim/2012/02/15/portreserve-systemd-solution/
* coredump:
- save coredump in Windows/Mozilla minidump format
- when truncating coredumps, also log the full size that the process had, and make a metadata field so we can report truncated coredumps
* support crash reporting operation modes (https://live.gnome.org/GnomeOS/Design/Whiteboards/ProblemReporting)
* be able to specify a forced restart of service A where service B depends on, in case B
needs to be auto-respawned?
* tmpfiles:
- apply "x" on "D" too (see patch from William Douglas)
- replace F with f+.
- instead of ignoring unknown fields, reject them.
- creating new directories/subvolumes/fifos/device nodes
should not follow symlinks. None of the other adjustment or creation
calls follow symlinks.
* make sure systemd-ask-password-wall does not shutdown systemd-ask-password-console too early
* verify that the AF_UNIX sockets of a service in the fs still exist
when we start a service in order to avoid confusion when a user
assumes starting a service is enough to make it accessible
* Make it possible to set the keymap independently from the font on
the kernel cmdline. Right now setting one resets also the other.
* and a dbus call to generate target from current state
* write blog stories about:
- hwdb: what belongs into it, lsusb
- enabling dbus services
- how to make changes to sysctl and sysfs attributes
- remote access
- how to pass throw-away units to systemd, or dynamically change properties of existing units
- testing with Harald's awesome test kit
- auto-restart
- how to develop against journal browsing APIs
- the journal HTTP iface
- non-cgroup resource management
- dynamic resource management with cgroups
- refreshed, longer missions statement
- calendar time events
- init=/bin/sh vs. "emergency" mode, vs. "rescue" mode, vs. "multi-user" mode, vs. "graphical" mode, and the debug shell
- how to create your own target
- instantiated apache, dovecot and so on
- hooking a script into various stages of shutdown/rearly booot
* investigate whether the gnome pty helper should be moved into systemd, to provide cgroup support.
* dot output for --test showing the 'initial transaction'
* pid1:
- When logging about multiple units (stopping BoundTo units, conflicts, etc.),
log both units as UNIT=, so that journalctl -u triggers on both.
- generate better errors when people try to set transient properties
that are not supported...
http://lists.freedesktop.org/archives/systemd-devel/2015-February/028076.html
- maybe introduce WantsMountsFor=? Usecase:
http://lists.freedesktop.org/archives/systemd-devel/2015-January/027729.html
- recreate systemd's D-Bus private socket file on SIGUSR2
- move PAM code into its own binary
- when we automatically restart a service, ensure we restart its rdeps, too.
- hide PAM options in fragment parser when compile time disabled
- Support --test based on current system state
- If we show an error about a unit (such as not showing up) and it has no Description string, then show a description string generated form the reverse of unit_name_mangle().
- after deserializing sockets in socket.c we should reapply sockopts and things
- drop PID 1 reloading, only do reexecing (difficult: Reload()
currently is properly synchronous, Reexec() is weird, because we
cannot delay the response properly until we are back, so instead of
being properly synchronous we just keep open the fd and close it
when done. That means clients do not get a successful method reply,
but much rather a disconnect on success.
- when breaking cycles drop sysv services first, then services from /run, then from /etc, then from /usr
- when a bus name of a service disappears from the bus make sure to queue further activation requests
* unit files:
- allow port=0 in .socket units
- maybe introduce ExecRestartPre=
- add ReloadSignal= for configuring a reload signal to use
- implement Register= switch in .socket units to enable registration
in Avahi, RPC and other socket registration services.
- allow Type=simple with PIDFile=
https://bugzilla.redhat.com/show_bug.cgi?id=723942
- allow writing multiple conditions in unit files on one line
- load-fragment: when loading a unit file via a chain of symlinks
verify that it is not masked via any of the names traversed.
- introduce Type=pid-file
- introduce mix of BindTo and Requisite
- add a concept of RemainAfterExit= to scope units
- Allow multiple ExecStart= for all Type= settings, so that we can cover rescue.service nicely
* udev-link-config:
- Make sure ID_PATH is always exported and complete for
network devices where possible, so we can safely rely
on Path= matching
- check MTUBytes parsing (expecting size_t but we are using unsigned)
* sd-rtnl:
- add support for more attribute types
- inbuilt piping support (essentially degenerate async)? see loopback-setup.c and other places
* networkd:
- add more keys to [Route] and [Address] sections
- add support for more DHCPv4 options (and, longer term, other kinds of dynamic config)
- add proper initrd support (in particular generate .network/.link files based on /proc/cmdline)
- add reduced [Link] support to .network files
- add Scope= parsing option for [Network]
- properly handle routerless dhcp leases
- work with non-Ethernet devices
- add support for more bond options
- dhcp: do we allow configuring dhcp routes on interfaces that are not the one we got the dhcp info from?
- the DHCP lease data (such as NTP/DNS) is still made available when
a carrier is lost on a link. It should be removed instantly.
- expose in the API the following bits:
- option 15, domain name and/or option 119, search list
- option 12, host name and/or option 81, fqdn
- option 123, 144, geolocation
- option 252, configure http proxy (PAC/wpad)
- provide a way to define a per-network interface default metric value
for all routes to it. possibly a second default for DHCP routes.
- allow Name= to be specified repeatedly in the [Match] section. Maybe also
support Name=foo*|bar*|baz ?
- duplicate address check for static IPs (like ARPCHECK in network-scripts)
- allow DUID/IAID to be customized, see issue #394.
- whenever uplink info changes, make DHCP server send out FORCERENEW
* networkd-wait-online:
- make operstates to wait for configurable?
* dhcp:
- figure out how much we can increase Maximum Message Size
* dhcp6:
- add functions to set previously stored IPv6 addresses on startup and get
them at shutdown; store them in client->ia_na
- write more test cases
- implement reconfigure support, see 5.3., 15.11. and 22.20.
- implement support for temporary adressess (IA_TA)
- implement dhcpv6 authentication
- investigate the usefulness of Confirm messages; i.e. are there any
situations where the link changes without any loss in carrier detection
or interface down
- some servers don't do rapid commit without a filled in IA_NA, verify
this behavior
- RouteTable= ?
External:
* dbus:
- natively watch for dbus-*.service symlinks (PENDING)
- teach dbus to activate all services it finds in /etc/systemd/services/org-*.service
* fix alsa mixer restore to not print error when no config is stored
* make cryptsetup lower --iter-time
* patch kernel for xattr support in /dev, /proc/, /sys?
* kernel: add device_type = "fb", "fbcon" to class "graphics"
* /usr/bin/service should actually show the new command line
* fedora: suggest auto-restart on failure, but not on success and not on coredump. also, ask people to think about changing the start limit logic. Also point people to RestartPreventExitStatus=, SuccessExitStatus=
* fedora: F20: go timer units all the way, leave cron.daily for cron
* neither pkexec nor sudo initialize environ[] from the PAM environment?
* fedora: update policy to declare access mode and ownership of unit files to root:root 0644, and add an rpmlint check for it
* register catalog database signature as file magic
* zsh shell completion:
- <command> <verb> -<TAB> should complete options, but currently does not
- systemctl add-wants,add-requires
Regularly:
* look for close() vs. close_nointr() vs. close_nointr_nofail()
* check for strerror(r) instead of strerror(-r)
* pahole
* set_put(), hashmap_put() return values check. i.e. == 0 does not free()!
* use secure_getenv() instead of getenv() where appropriate
* link up selected blog stories from man pages and unit files Documentation= fields
String is not UTF-8 clean, ignoring assignment
timedatex.service: Consumed 26ms CPU time.