systemd/man/systemd-stub.xml
2021-10-16 13:26:21 +02:00

213 lines
11 KiB
XML

<?xml version='1.0'?> <!--*-nxml-*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<!-- SPDX-License-Identifier: LGPL-2.1-or-later -->
<refentry id="systemd-stub" conditional='ENABLE_EFI'
xmlns:xi="http://www.w3.org/2001/XInclude">
<refentryinfo>
<title>systemd-stub</title>
<productname>systemd</productname>
</refentryinfo>
<refmeta>
<refentrytitle>systemd-stub</refentrytitle>
<manvolnum>7</manvolnum>
</refmeta>
<refnamediv>
<refname>systemd-stub</refname>
<refname>linuxx64.efi.stub</refname>
<refname>linuxia32.efi.stub</refname>
<refname>linuxaa64.efi.stub</refname>
<refpurpose>A simple UEFI kernel boot stub</refpurpose>
</refnamediv>
<refsynopsisdiv>
<para><filename>/usr/lib/systemd/boot/efi/linuxx64.efi.stub</filename></para>
<para><filename>/usr/lib/systemd/boot/efi/linuxia32.efi.stub</filename></para>
<para><filename>/usr/lib/systemd/boot/efi/linuxaa64.efi.stub</filename></para>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para><command>systemd-stub</command> (stored in per-architecture files
<filename>linuxx64.efi.stub</filename>, <filename>linuxia32.efi.stub</filename>,
<filename>linuxaa64.efi.stub</filename> on disk) is a simple UEFI boot stub. An UEFI boot stub is
attached to a Linux kernel binary image, and is a piece of code that runs in the UEFI firmware
environment before transitioning into the Linux kernel environment. The UEFI boot stub ensures a Linux
kernel is executable as regular UEFI binary, and is able to do various preparations before switching the
system into the Linux world.</para>
<para>The UEFI boot stub looks for various resources for the kernel invocation inside the UEFI PE binary
itself. This allows combining various resources inside a single PE binary image, which may then be signed
via UEFI SecureBoot as a whole, covering all individual resources at once. Specifically it may
include:</para>
<itemizedlist>
<listitem><para>The ELF Linux kernel images will be looked for in the <literal>.linux</literal> PE
section of the executed image.</para></listitem>
<listitem><para>The initial RAM disk (initrd) will be looked for in the <literal>.initrd</literal> PE
section.</para></listitem>
<listitem><para>A compiled binary DeviceTree will be looked for in the <literal>.dtb</literal> PE
section.</para></listitem>
<listitem><para>The kernel command line to pass to the invoked kernel will be looked for in the
<literal>.cmdline</literal> PE section.</para></listitem>
<listitem><para>A boot splash (in Windows <filename>.BMP</filename> format) to show on screen before
invoking the kernel will be looked for in the <literal>.splash</literal> PE section.</para></listitem>
</itemizedlist>
<para>If UEFI SecureBoot is enabled and the <literal>.cmdline</literal> section is present in the executed
image, any attempts to override the kernel command line by passing one as invocation parameters to the
EFI binary are ignored. Thus, in order to allow overriding the kernel command line, either disable UEFI
SecureBoot, or don't include a kernel command line PE section in the kernel image file. If a command line
is accepted via EFI invocation parameters to the EFI binary it is measured into TPM PCR 8 (if a TPM is
present).</para>
<para>If a DeviceTree is embedded in the <literal>.dtb</literal> section, it replaces an existing
DeviceTree in the corresponding EFI configuration table. systemd-stub will ask the firmware via the
<literal>EFI_DT_FIXUP_PROTOCOL</literal> for hardware specific fixups to the DeviceTree.</para>
</refsect1>
<refsect1>
<title>Companion Files</title>
<para>The <command>systemd-stub</command> UEFI boot stub automatically collects two types of auxiliary
companion files optionally placed in a drop-in directory next to the EFI binary and dynamically generates
<command>cpio</command> initrd archives from them, and passes them to the kernel. Specifically:</para>
<itemizedlist>
<listitem><para>For a kernel binary called <filename><replaceable>foo</replaceable>.efi</filename> it
will look for files with the <filename>.cred</filename> suffix in a directory named
<filename><replaceable>foo</replaceable>.efi.extra.d/</filename>, next to it. A <command>cpio</command>
archive is generated from all files found that way, placing them in the
<filename>/.extra/credentials/</filename> directory of the initrd file hierarchy. The main initrd may
then access them in this directory. This is supposed to be used to store auxiliary, encrypted,
authenticated credentials for use with <varname>LoadCredentialEncrypted=</varname> in the UEFI System
Partition. See
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
details on encrypted credentials. The generated <command>cpio</command> archive is measured into TPM
PCR 4 (if a TPM is present)</para></listitem>
<listitem><para>Similar, files <filename><replaceable>foo</replaceable>.efi.extra.d/*.raw</filename>
are packed up as <command>cpio</command> archive and placed in the <filename>/.extra/sysext/</filename>
directory in the initrd file hierarchy. This is supposed to be used to pass additional system extension
images to the initrd. See
<citerefentry><refentrytitle>systemd-sysext</refentrytitle><manvolnum>8</manvolnum></citerefentry> for
details on system extension images. The generated <command>cpio</command> archive containing these
system extension images is measured into TPM PCR 8 (if a TPM is present).</para></listitem>
</itemizedlist>
<para>Both mechanisms may be used to parameterize and extend trusted (i.e. signed), immutable initrd
images in a reasonably safe way: all data they contain is measured into TPM PCRs. On access they should be
further validated: in case of the credentials case by encrypting/authenticating them via TPM, as exposed
by <command>systemd-creds encrypt -T</command> (see
<citerefentry><refentrytitle>systemd-creds</refentrytitle><manvolnum>1</manvolnum></citerefentry> for
details); in case of the system extension images by using signed Verity images.</para>
</refsect1>
<refsect1>
<title>EFI Variables</title>
<para>The following EFI variables are defined, set and read by <command>systemd-stub</command>, under the
vendor UUID <literal>4a67b082-0a4c-41cf-b6c7-440b29bb8c4f</literal>, for communication between the boot
stub and the OS:</para>
<variablelist class='efi-variables'>
<varlistentry>
<term><varname>LoaderDevicePartUUID</varname></term>
<listitem><para>Contains the partition UUID of the EFI System Partition the EFI image was run
from. <citerefentry><refentrytitle>systemd-gpt-auto-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>
uses this information to automatically find the disk booted from, in order to discover various other
partitions on the same disk automatically.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>LoaderFirmwareInfo</varname></term>
<term><varname>LoaderFirmwareType</varname></term>
<listitem><para>Brief firmware information. Use
<citerefentry><refentrytitle>bootctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> to view this
data.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>LoaderImageIdentifier</varname></term>
<listitem><para>The path of EFI executable, relative to the EFI System Partition's root
directory. Use
<citerefentry><refentrytitle>bootctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> to view
this data.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>StubInfo</varname></term>
<listitem><para>Brief stub information. Use
<citerefentry><refentrytitle>bootctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> to view
this data.</para></listitem>
</varlistentry>
</variablelist>
<para>Note that some of the variables above may also be set by the boot loader. The stub will only set
them if they aren't set already. Some of these variables are defined by the <ulink
url="https://systemd.io/BOOT_LOADER_INTERFACE">Boot Loader Interface</ulink>.</para>
</refsect1>
<refsect1>
<title>Assembling Kernel Images</title>
<para>In order to assemble an UEFI PE kernel image from various components as described above, use an
<citerefentry><refentrytitle>objcopy</refentrytitle><manvolnum>1</manvolnum></citerefentry> command line
like this:</para>
<programlisting>objcopy \
--add-section .osrel=os-release --change-section-vma .osrel=0x20000 \
--add-section .cmdline=cmdline.txt --change-section-vma .cmdline=0x30000 \
--add-section .dtb=devicetree.dtb --change-section-vma .dtb=0x40000 \
--add-section .splash=splash.bmp --change-section-vma .splash=0x100000 \
--add-section .linux=vmlinux --change-section-vma .linux=0x2000000 \
--add-section .initrd=initrd.cpio --change-section-vma .initrd=0x3000000 \
/usr/lib/systemd/boot/efi/linuxx64.efi.stub \
foo-unsigned.efi</programlisting>
<para>This generates one PE executable file <filename>foo-unsigned.efi</filename> from the six individual
files for OS release information, kernel command line, boot splash image, kernel image, main initrd and
UEFI boot stub.</para>
<para>To then sign the resulting image for UEFI SecureBoot use an
<citerefentry><refentrytitle>sbsign</refentrytitle><manvolnum>1</manvolnum></citerefentry> command like
the following:</para>
<programlisting>sbsign \
--key mykey.pem \
--cert mykey.crt \
--output foo.efi \
foo-unsigned.efi</programlisting>
<para>This expects a pair of X.509 private key and certificate as parameters and then signs the UEFI PE
executable we generated above for UEFI SecureBoot and generates a signed UEFI PE executable as
result.</para>
</refsect1>
<refsect1>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd-boot</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd-creds</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd-sysext</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
<ulink url="https://systemd.io/BOOT_LOADER_SPECIFICATION">Boot Loader Specification</ulink>,
<ulink url="https://systemd.io/BOOT_LOADER_INTERFACE">Boot Loader Interface</ulink>,
<citerefentry><refentrytitle>objcopy</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sbsign</refentrytitle><manvolnum>1</manvolnum></citerefentry>
</para>
</refsect1>
</refentry>