--no-legend is replaced by --legend=no.
--quiet now implies --legend=no, but --legend=yes may be used to override that.
--quiet controls hints and warnings and such, and --legend controls just the
legends. I think it makes sense to allow both to controlled independently, in
particular --quiet --legend makes sense when using systemctl in a script to
provide some user-visible output.
Fixes#18560.
This is almost equivalent to 'busctl call-method org.freedesktop.systemd1
/org/freedesktop/systemd1 org.freedesktop.systemd1.Manager EnqueueMarkedJobs',
but waits for the jobs to finish.
The wiki was slightly stale, and almost all the information there
was already present in the man page. I moved the remaing part (discussion)
into the man page and adjusted all links to point to the man page instead.
daemon(7) has a some examples of packaging scriptlets… I don't think it fits
there very well. Most likely they should be moved to systemd.preset(5) or maybe
even removed, but I'm leaving that for later.
So far, we would allow certain control characters (NL since
b4346b9a77, TAB since 6294aa76d8), but not others. Having
other control characters in environment variable *value* is expected and widely
used, for various prompts like $LESS, $LESS_TERMCAP_*, and other similar
variables. The typical environment exported by bash already contains a dozen or
so such variables, so programs need to handle them.
We handle then correctly too, for example in 'systemctl show-environment',
since 804ee07c13. But we would still disallow setting such variables
by the user, in unit file Environment= and in set-environment/import-environment
operations. This is unexpected and confusing and doesn't help with anything
because such variables are present in the environment through other means.
When printing such variables, 'show-environment' escapes all special
characters, so variables with control characters are plainly visible.
In other uses, e.g. 'cat -v' can be used in similar fashion. This would already
need to be done to suppress color codes starting with \[.
Note that we still forbid invalid utf-8 with this patch. (Control characters
are valid, since they are valid 7-bit ascii.) I'm not sure if we should do
that, but since people haven't been actually asking for invalid utf-8, and only
for control characters, and invalid utf-8 causes other issues, I think it's OK
to leave this unchanged.
Fixes#4446, https://gitlab.gnome.org/GNOME/gnome-session/-/issues/45.
Allow to setup new bind mounts for a service at runtime (via either
DBUS or a new 'systemctl bind' verb) with a new helper that forks into
the unit's mount namespace.
Add a new integration test to cover this.
Useful for zero-downtime addition to services that are running inside
mount namespaces, especially when using RootImage/RootDirectory.
If a service runs with a read-only root, a tmpfs is added on /run
to ensure we can create the airlock directory for incoming mounts
under /run/host/incoming.
As described in #2680, systemctl did ignore inhibitors if it is not
attached to a tty to allow scripts to ignore inhibitors automatically.
This pull request preserves this behavior but allows scripts to
explicit check inhibitors if required.
The new parameter '--check-inhibitors=yes' enables this feature.
The old parameter '-i'/'--ignore-inhibitors' was deprecated in favor
of '--check-inhibitors=no', the default behaviour can be specified
with '--check-inhibitors=auto'.
The new parameter is also described in the documentations and shell
completions found here.
Importing the full environment is convenient, but it doesn't work too well in
practice, because we get a metric ton of shell-specific crap that should never
end up in the global environment block:
$ systemctl --user show-environment
...
SHELL=/bin/zsh
AUTOJUMP_ERROR_PATH=/home/zbyszek/.local/share/autojump/errors.log
AUTOJUMP_SOURCED=1
CONDA_SHLVL=0
CVS_RSH=ssh
DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus
DESKTOP_SESSION=gnome
DISPLAY=:0
FPATH=/usr/share/Modules/init/zsh-functions:/usr/local/share/zsh/site-functions:/usr/share/zsh/site-functions:/usr/share/zsh/5.8/functions
GDMSESSION=gnome
GDM_LANG=en_US.UTF-8
GNOME_SETUP_DISPLAY=:1
GUESTFISH_INIT=$'\\e[1;34m'
GUESTFISH_OUTPUT=$'\\e[0m'
GUESTFISH_PS1=$'\\[\\e[1;32m\\]><fs>\\[\\e[0;31m\\] '
GUESTFISH_RESTORE=$'\\e[0m'
HISTCONTROL=ignoredups
HISTSIZE=1000
LOADEDMODULES=
OLDPWD=/home/zbyszek
PWD=/home/zbyszek
QTDIR=/usr/lib64/qt-3.3
QTINC=/usr/lib64/qt-3.3/include
QTLIB=/usr/lib64/qt-3.3/lib
QT_IM_MODULE=ibus
SDL_VIDEO_MINIMIZE_ON_FOCUS_LOSS=0
SESSION_MANAGER=local/unix:@/tmp/.ICE-unix/2612,unix/unix:/tmp/.ICE-unix/2612
SHLVL=0
STEAM_FRAME_FORCE_CLOSE=1
TERM=xterm-256color
USERNAME=zbyszek
WISECONFIGDIR=/usr/share/wise2/
...
Plenty of shell-specific and terminal-specific stuff that have no global
significance.
Let's start warning when this is used to push people towards importing only
specific variables.
Putative NEWS entry:
* systemctl import-environment will now emit a warning when called without
any arguments (i.e. to import the full environment block of the called
program). This command will usually be invoked from a shell, which means
that it'll inherit a bunch of variables which are specific to that shell,
and usually to the tty the shell is connected to, and don't have any
meaning in the global context of the system or user service manager.
Instead, only specific variables should be imported into the manager
environment block.
Similarly, programs which update the manager environment block by directly
calling the D-Bus API of the manager, should also push specific variables,
and not the full inherited environment.
This adds a general description of "philosphy" of keeping the environemnt
block small and hints about systemd-run -P env.
The list of generated variables is split out to a subsection. Viewing
the patch with ignoring whitespace changes is recommended.
We don't ignore invalid assignments (except in import-environment to some
extent), previous description was wrong.
For https://bugzilla.redhat.com/show_bug.cgi?id=1912046#c17.
Some extra safety when invoked via "sudo". With this we address a
genuine design flaw of sudo, and we shouldn't need to deal with this.
But it's still a good idea to disable this surface given how exotic it
is.
Prompted by #5666
Heavily inspired by #15622. This adds:
systemctl service-log-level systemd-resolved
systemctl service-log-level systemd-resolved info
systemctl service-log-target systemd-resolved
systemctl service-log-target systemd-resolved console
We already have systemctl verbs log-level, log-target, and service-watchdogs.
Those two new verbs tie nicely into this scheme.
The list was rather ad hoc, with "reset-failed" sandwiched between
"help" and "list-dependencies". Since a person will usually either want
to introspect state in various ways or modify state in a certain way, let's
put all the introspection commands together and all the ones that actually
have an effect second.
Let's document the discrepancy between the Sec and USec suffixing of
unit files and D-Bus properties at three places: in "systemctl show"
(where it already was briefly mentioned), in the D-Bus interface
description (at one place at least, i.e. the most prominent of
properties that encapsulate time values, there are many more) and in the
general man page explaining time values.
By documenting this at all three places I think we now do as much as we
can do about this highlighting the discrepancy of the naming and the
reasons behind it.
Fixes: #2047
Timestamps for unit start/stop are recorded with microsecond granularity,
but status and show truncate to second granularity by default.
Add a --timestamp=pretty|us|utc option to allow including the microseconds
or to use the UTC TZ to all timestamps printed by systemctl.
For users, the square brackets already serve as markup and clearly delineate
the section name from surrounding text. Putting additional markup around that
only adds clutter. Also, we were very inconsistent in using the quotes. Let's
just drop them altogether.
For units which are aliases of other units, reporting preset status as
"enabled" is rather misleading. For example, dbus.service is an alias of
dbus-broker.service. In list-unit-files we'd show both as "enabled". In
particular, systemctl preset ignores aliases, so showing any preset status at
all is always going to be misleading. Let's introduce a new state "alias" and
use that for all aliases.
I was trying to avoid adding a new state, to keep compatibility with previous
behaviour, but for alias unit files it simply doesn't seem very useful to show
any of the existing states. It seems that the clearly showing that those are
aliases for other units will be easiest to understand for users.
With cgroup v2 the cgroup freezer is implemented as a cgroup
attribute called cgroup.freeze. cgroup can be frozen by writing "1"
to the file and kernel will send us a notification through
"cgroup.events" after the operation is finished and processes in the
cgroup entered quiescent state, i.e. they are not scheduled to
run. Writing "0" to the attribute file does the inverse and process
execution is resumed.
This commit exposes above low-level functionality through systemd's DBus
API. Each unit type must provide specialized implementation for these
methods, otherwise, we return an error. So far only service, scope, and
slice unit types provide the support. It is possible to check if a
given unit has the support using CanFreeze() DBus property.
Note that DBus API has a synchronous behavior and we dispatch the reply
to freeze/thaw requests only after the kernel has notified us that
requested operation was completed.
This is useful to raise the log level for a single transaction or a few,
without affecting other state of the resolved as a restart would.
The log level can only be set, I didn't bother with having the ability
to restore the original as in pid1.
In those two pages, we need to include individual entries with xi:include to
merge the list less-variables.xml with the other entries, which is obviously
error prone. All variables are supported in both tools so add them.
This copies the commands log-level and log-target (to query and set the current
settings) from systemd-analyze to systemctl, essentially reverting
a65615ca5d. Controllling the log level settings
of the manager is basic functionality, that should be available even if
systemd-analyze (which is more of an analysis tool) is not installed. This is
like dmesg and journalctl, which should be available even if a debugger and
more advanced tools to analyze the kernel are not available. (Note that dmesg
is used to control the log level too, not just to browse the kernel logs.)
I chose to copy&paste the methods from analyze.c to the new location. There
isn't enough code to share, because acquire_bus() in both places has a
different signature despite the same name, so the only part that is common
is the invocation of sd_bus_set_property().
For executables which take a verb, we should list the verbs first, and
then options which modify those verbs second. The general layout of
the man page is from general description to specific details, usually
Overview, Commands, Options, Return Value, Examples, References.
