Add new key mappings for the HP Elite Dragonfly G2 laptop:
1. Map Fn+F12 (HP Programmable Key) to prog1.
2. Unmap Fn+F11 (Airplane mode) from atkbd and Intel HID events, as this
key is also reported by HP Wireless hotkeys.
* Add special keyboard combos for Thinkpad P1 Gen 3
These are based on the key codes I've found with evtest. See issue
https://github.com/systemd/systemd/issues/24814 for more details.
I'm not entirely sure what some of these keys are supposed to do,
notably Fn+RShift; this doesn't seem to do anything in Windows on
my machine. Binding them to prog# makes them available to desktop
managers' key bindings at least, in case someone wishes to make
use of this extra keybind possibility.
The Acer Aspire One AOD270 and the same hardware rebranded as
Packard Bell Dot SC need a couple of keymap fixups:
1. The switch-video-mode key does not do anything. Standard acer-wmi
maps scancode 0x61 to KEY_IGNORE since typically these events are
duplicate with the ACPI video bus. But on these models the ACPI video
bus does not send events for this key, so map it.
2. The Brightness up / down hotkeys send atkbd scancode 0xce / 0xef
which by default are mapped to KEY_KPPLUSMINUS and KEY_MACRO.
These actually are duplicate events with the ACPI video bus,
so map these to KEY_IGNORE.
The key doesn't create a release event. This is a fix to make it work properly. I made sure the product is generic to work on all Victus laptops.
This fix#23006.
This adds support for Fn+PrtSc on my Lenovo Thinkpad Extreme gen 2. Judging by the picture on the key, it should probably instead of prog2 be "selective_screenshot" (that is a possible value from judging this list e18d950ce5/keynames.txt ) but that does not register with evtest at all. With this change, evtest reports:
```
Event: time 1661081631.027773, type 1 (EV_KEY), code 149 (KEY_PROG2), value 1
Event: time 1661081631.027773, -------------- SYN_REPORT ------------
Event: time 1661081631.027886, type 1 (EV_KEY), code 149 (KEY_PROG2), value 0
Event: time 1661081631.027886, -------------- SYN_REPORT ------------
```
I am not sure if systemd is the right place to add this, if not, please refer me somewhere else.
This device implements the phone mute HID usage as a toggle switch,
where 1 indicates muted, and 0 indicates unmuted. However, for a key
event 1 indicates that the key has been pressed and 0 indicates it has
been released. This mismatch causes issues, so prevent key events from
being generated for this HID usage.
For micmute userspace handles both micmute and f20, as Xorg cannot
handle the high keycode that the micmute key has. As such, adding the
remapping means that the key will work on Xorg clients and not just when
using wayland.
Add keymappings for the Acer Aspire One AO532h netbook.
Unmap the brightnesskeys because they send duplicate key events with
the ACPI video bus key events and add a mapping for the bluetooth
on/off hotkey.
We've had this text since the beginning, but in fact the patterns must be
stable in order for people to create local hwdb entries. And we support that
and can't change the match patterns without being very careful. So let's just
drop the text.
On the new Elite x360 2 in 1 HP laptops, the microphone mute hotkey is "Fn+F8" and
the scancode for this hotkey is 0x81, but this scancode was mapped to
fn_esc in the HP generic keymap section. To fix this problem, we add
a machine specific keymap section to add the correct keymap rule.
The brightness control key (Fn+F7 Fn+F8) and touchpad toggle key (Fn + Space) do not work on the NEC VersaPro VG-S laptop. Add the keycode to fix the problem.
The machine has tree buttons connected to an EC that acts as a regular
AT-compatible keyboard controller. It can be either in "Windows 7" or
"Android" mode. It boots up with the earlier, but the Android build on
the tablet switches it on bootup (Windows presumably leaves it as-is).
The "Windows 7" mode, the behavior is very inconvenient: the Home button
emits multiple key presses that presumably do something in Windws 7 while
the second button toggles the RF Kill Switch in addition to producing a
scancode (it's labeled "Back" on Android version of the tablet).
The "Android" mode just sends the good ol' scan codes and this patch
handles them. On mainline Linux, the "x86-android-tablets" driver makes
sure we're in the correct mode.
The Asus TF103C misses the home button in its PNP0C40 GPIO resources
causing the button mappings for the volume buttons to be off by one,
leading to the volume-up button sending home button presses and the
volume-down button sending volume-up button presses.
Add a 60-keyboard hwdb entry to correct the mappings. Note this is
split over 2 input devices because the soc_button_array driver
creates separate input devices for power + home and vol up/down.
This is done because power/home act as wakeup buttons where as
the volume buttons do not.
This means that after this fixup the home -> volume-up button
still acts as a wakeup button, there is nothing which can be done
about this without adding a kludge to the kernel which is not
worth the trouble (IMHO).
Turns out HP is phasing out hp-wireless in new models, so we need to use
intel-hid for rfkill events.
To have best backward and forward compatibility, the solution is
implemented in userspace:
f4dbcf3d7b
The atkbd device on the Lenovo Yoga 300-11IBR 2-in-1 sends unknown
keycodes when the touchpad is toggled on/off:
[ 1918.995562] atkbd serio0: Unknown key pressed (translated set 2, code 0x63 on isa0060/serio0).
[ 1918.995610] atkbd serio0: Use 'setkeycodes 63 <keycode>' to make it known.
[ 1919.032121] atkbd serio0: Unknown key released (translated set 2, code 0x63 on isa0060/serio0).
[ 1919.032135] atkbd serio0: Use 'setkeycodes 63 <keycode>' to make it known.
[ 1926.098414] atkbd serio0: Unknown key pressed (translated set 2, code 0x62 on isa0060/serio0).
[ 1926.098461] atkbd serio0: Use 'setkeycodes 62 <keycode>' to make it known.
[ 1926.146537] atkbd serio0: Unknown key released (translated set 2, code 0x62 on isa0060/serio0).
[ 1926.146583] atkbd serio0: Use 'setkeycodes 62 <keycode>' to make it known.
The "Ideapad extra buttons" driver alreadys sends f22 / f23 key-events
when the touchpad is toggles off, so map the keycodes for the duplicate
atkbd events to unknown to silence these kernel warnings.
I have also seen that VIOS LTH17 has the exact same correction and it's also a SIPODEV composite hid device also through usb. In the D330 is a detachable keyboard. It's possible that a very generic way to apply this to at least affected sipodev keyboard could be found using the device ids, but needs info to do that and ensure all sipodev keyboard with the pertinent ids need it.
Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
This patch fix scancode 0x120001 mapping to key code F20 micmute
The previous scancode is not correct, it will cause the micmute
hotkey no function when testing the mic mute
Dell new Privacy feature provide new hardware level privacy
protect for users
This patch remaps scancode 0x120001 to key code F20 micmute
The old matching string cannot cover some other Dell products
which have the privacy feature,expand the string to all the system
that can load the privacy driver,privacy driver already detect the
system if it can support this feature. So here we can safely just
map the micmute key to scancode 0x120001
Signed-off-by: Perry Yuan <perry_yuan@dell.com>
The additional rules fix a firmware bug in the en keyboard of Librem notebooks by Purism.
By doing so the break the keyboard with other layouts which do not have the same bug in their firmware.
The device is very similar to MACH-WX9 in many ways, including this
particular one. Adding these rules gets rid of evdev warnings as buttons
are being pressed on this device.
It is only the Samsung 900X3A which has the alternative function keys.
The 900X3B, 900X4B have the standard Series 9 layout - as defined above.
Note: the 900X4A is not a valid laptop model.
2 updates to the Logitech MX5000 key mappings:
1. Fix Logitech MX5000 Media key mapping:
The MX5000 has a key clearly marked "media" (in text) and when they gets
pressed the keyboards LCD briefly shows "MEDIA" in a big font.
Yet the keyboard sends a HID usage code which according to the HUTT
is config/control-panel. Map this to media so that the key behaves as
labeled.
2. Add mapping for the scan-code send by the Fn on/off toggle key
The Logitech Dinovo Edge has 5 special hotkeys, one with a phone symbol
and the 4 usual Logitech A-D smartkeys. These send custom Logitech
0xc10xx keycodes, add mappings for these.
Some Logitech wireless keyboards report when there Fn key is pressed,
add a mapping for this.
While it also fix identiation of 2 adjescent key-maps to use tabs like the
other Logitech entries
Dell new Privacy feature provide new hardware level privacy
protect for users,it needs to map the scan code to F20 micmute
Signed-off-by: Perry Yuan <perry_yuan@dell.com>
I tested this on my ZBook Studio G5. I'm not sure if this works for other ZBook studio machines.
I have two more notes on this PR:
- some keys send multiple scancodes. I matched only on one of them, because I couldn't figure out how to match
on all of them. This results in the others still being visible:
Event: time 1604520228.146226, -------------- SYN_REPORT ------------
Event: time 1604520228.151533, type 4 (EV_MSC), code 4 (MSC_SCAN), value db
Event: time 1604520228.151533, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 1
Event: time 1604520228.151533, -------------- SYN_REPORT ------------
Event: time 1604520228.259862, type 4 (EV_MSC), code 4 (MSC_SCAN), value 38
Event: time 1604520228.259862, type 1 (EV_KEY), code 56 (KEY_LEFTALT), value 0
Event: time 1604520228.259862, -------------- SYN_REPORT ------------
Event: time 1604520228.259944, type 4 (EV_MSC), code 4 (MSC_SCAN), value 66
Event: time 1604520228.259944, type 1 (EV_KEY), code 218 (KEY_CONNECT), value 0
Event: time 1604520228.259944, -------------- SYN_REPORT ------------
Event: time 1604520228.266513, type 4 (EV_MSC), code 4 (MSC_SCAN), value db
Event: time 1604520228.266513, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 0
Event: time 1604520228.266513, -------------- SYN_REPORT ------------
I wanted to set the display key to switchvideomode, but another key is already set to that, so I set it to displaytoggle instead.
Pinebook Pro's display brightness up & down keys do not work until the
keys are mapped to the corresponding codes.
Also, the sleep key is mapped to KEY_POWER code originally. This quirk
maps the sleep key to the KEY_SLEEP code.
This idea comes from the pinebookpro-post-install package [1] of Manjaro
ARM, which is the preloaded OS on Pinebook Pro.
[1]: 7ab1a134ea
This reverts commit c0443b97b7.
I got various cases wrong:
"usb:v04F3p2B7Cd5912dc00dsc00dp00ic03isc00ip00in00"
"usb:v0627p0001:QEMU USB Tablet"
"input:b0003v0627p0001e0001-e0,1,2,4,k110,111,112,r0,1,8,B,am4,lsfw"
OTOH:
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
is OK. Other parts follow after 'pn'.
-mouse:*:name:*Trackball*:*
-mouse:*:name:*trackball*:*
-mouse:*:name:*TrackBall*:*
+mouse:*:name:*Trackball*:
+mouse:*:name:*trackball*:
+mouse:*:name:*TrackBall*:
... and anything else with :name should be OK too, because our imports always
include ":" at the end:
IMPORT{builtin}="hwdb 'joystick:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'"
Including '*' at the end makes the pattern work even if we decide to add
something to the match string later.
Fixes#17499.
The properties are not unquoted by udev, so the quotes effectively became part
of the value.
Even though those properties were added quite a while ago
(086c001e29,
d7d31692bf), they never started being used
(because of issues with having multiple layouts), see
https://gitlab.gnome.org/GNOME/mutter/-/issues/906,
https://bugzilla.gnome.org/show_bug.cgi?id=775681.
Let's remove the quotes while we still can.
From https://bugzilla.gnome.org/show_bug.cgi?id=775681#c7:
> Note to self: the values for XKB_FIXED_LAYOUT and XKB_FIXED_VARIANT are
> quoted, meaning that we need to remove the quotes before passing the values
> from udev_device_get_property_value() to xkb_keymap_new_from_names()
> otherwise the compilation of the keymap fails (please don't ask how I found
> out...)
No functional change is intended.
The general pattern of changes:
-usb:v04F3p2B7C*
+usb:v04F3p2B7C:*
This is mostly a clarification, to make the part that makes the usb vXXXXpYYYY
part visually separated. It would only make a difference if we added further
keys with a different number of digits, which is unlikely.
-usb:v0627p0001:*QEMU USB Keyboard*
-usb:v0627p0001:*QEMU USB Mouse*
-usb:v0627p0001:*QEMU USB Tablet*
+usb:v0627p0001:*QEMU USB Keyboard*:*
+usb:v0627p0001:*QEMU USB Mouse*:*
+usb:v0627p0001:*QEMU USB Tablet*:*
Again, only a clarification. We know that ":" will appear somewhere later in
the match key, so anything that matches "…Keyboard*" will also match "…Keyboard*:*".
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
This makes the match narrower. Previously we would match product "N53SV"
and "N53SV2", "N53SV3", and others. Here we are saying that the ':pn' part must
match exactly. Most of the changes in this patch match this pattern. I made a few
judgement calls and used "pn…*:*" when I wasn't sure if the full pn is included:
-evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*
+evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*:*
-evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:
+evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:*
This more like the "QEMU" example above, since all dmi strings end in ":", so
anything which matches the old version will also match the new version.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:pvr*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:*
I replaced trailing ":pvr*" by ":*". This makes no functional difference because
we expect "pvr" to always appear in the dmi string. This makes patterns shorter.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*:*
OTOH, ":pn*" is kept. This is because almost patterns include ":pn*", and if we
skip it, we should make it clear that this is on purpose, that we really want to
match any product name.
The python script to generate autosuspend rules is updated to use ":*" too.
Inspired by https://github.com/systemd/systemd/pull/17281#discussion_r501489750.
I'm keeping this part separate because a function change is intended here.
Those patterns didn't match:
$ systemd-hwdb query 'evdev:atkbd:dmi:bvn_:bvr_:bd_:svnLENOVO:pn_:pvrThinkPadT430s'
KEYBOARD_LED_CAPSLOCK=0
$ systemd-hwdb query 'evdev:atkbd:dmi:bvn_:bvr_:bd_:svnLENOVO:pn_:pvrThinkPadT430s:'
(nil)
This commit add calendar and micmute hotkeys for HP EliteBook Folio G1, and also correct name of other laptop from HP EliteBook Folio series - HP EliteBook Folio 1040 G2
1. rfkill hotkey is reported from three source: keyboard, Intel HID and HP Wireless hotkeys. Let's block first two.
2. Correct mapping for calendar, micmute, display and brightness hotkeys.
This commit enables the microphone mute button and the screen rotate button, even if the latter is improperly linked. I have documented how to achieve this in https://wiki.archlinux.org/index.php/MSI_P15#Fn_Keys .
HP spec mandates the hp-wireless driver as canonical source of rfkill
event, so mask the rfkill event from intel-hid to avoid double rfkill
events fired from a single hotkey press.
With the default config repeated press of fn+VolumeUp or fn+VolumeDown lead to
repeated presses even after release, which leads to volume going to 100% or 0%.
The kernel now has proper evdev codes for the menu buttons below the
small LCD-s builtin to some keyboards.
Add mappings for these buttons on the Logitech MX5000 and MX5500 keyboards.
Chromebook keyboards have a top row which generates f1-f10 key codes but
the keys have media symbols printed on them. A simple scan code to key
code mapping to the correct media keys makes the f1-f10 inaccessible. To
properly use the keyboard a custom key code to symbol mapping in xbk is
required (a variant of the chromebook xkb model is already upstream).
Other devices have similar problems.
This commit makes it possible to specify which xkb model should be used
for a specific device by setting XKB_FIXED_MODEL.
