Use FOREACH_ELEMENT where possible. Generated with this command,
and checked manually:
git grep -l 'FOREACH_ARRAY.*ELEMENTSOF' | \
xargs sed -ri 's/FOREACH_ARRAY\((.*), (.*), (ELEMENTSOF.*)\)/FOREACH_ELEMENT(\1, \2)/'
If getty-generator runs in the initrd, the corresponding tty might not
have been instantiated yet in /dev, which means a serial getty is not
spawned on it. Instead, let's instantiate the serial-getty when the
device appears so that it always gets instantiated.
-1 was used everywhere, but -EBADF or -EBADFD started being used in various
places. Let's make things consistent in the new style.
Note that there are two candidates:
EBADF 9 Bad file descriptor
EBADFD 77 File descriptor in bad state
Since we're initializating the fd, we're just assigning a value that means
"no fd yet", so it's just a bad file descriptor, and the first errno fits
better. If instead we had a valid file descriptor that became invalid because
of some operation or state change, the other errno would fit better.
In some places, initialization is dropped if unnecessary.
Same idea as 03677889f0.
No functional change intended. The type of the iterator is generally changed to
be 'const char*' instead of 'char*'. Despite the type commonly used, modifying
the string was not allowed.
I adjusted the naming of some short variables for clarity and reduced the scope
of some variable declarations in code that was being touched anyway.
Previously the mkdir_label() family of calls was implemented in
src/shared/mkdir-label.c but its functions partly declared ins
src/shared/label.h and partly in src/basic/mkdir.h (!!). That's weird
(and wrong).
Let's clean this up, and add a proper mkdir-label.h matching the .c
file.
The naming of variables is very inconsistent. I tried to use more
modern style naming (UNDERSCORED_TITLE_CASE), but I didn't change existing
names too much. Only SYSTEM_DATA_UNIT_PATH is renamed to SYSTEM_DATA_UNIT_DIR
to match SYSTEM_CONFIG_UNIT_DIR.
systemd already sets the umask (see e3b8d0637d). When
running under systemd, we don't need to set it. And when *not* running under
systemd, for example during development, there is no reason to override the user
config. Let's just drop those calls.
$ git grep -e 'umask\(' -l 'src/*generator*' |xargs perl -i -0pe 's|^[^\n]*umask\([^\n]+\n\n||gms'
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
This removes LOG_TARGET_SAFE. It's made redundant by the new
"prohibit-ipc" logging flag, as it used to have a similar effect: avoid
logging to the journal/syslog, i.e. any local services in order to avoid
deadlocks when we lock from PID 1 or its utility processes (such as
generators).
All previous users of LOG_TARGET_SAFE are switched over to the new
setting. This makes things a bit safer for all, as not even the
SYSTEMD_LOG_TARGET env var can be used to accidentally log to the
journal anymore in these programs.
gcc is confused by the common idiom of
return errno ? -errno : -ESOMETHING
and thinks a positive value may be returned. Replace this condition
with errno > 0 to help gcc and avoid many spurious warnings. I filed
a gcc rfe a long time ago, but it hard to say if it will ever be
implemented [1].
Both conventions were used in the codebase, this change makes things
more consistent. This is a follow up to bcb161b023.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61846
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
Introduce a proper enum, and don't pass around string ids anymore. This
simplifies things quite a bit, and makes virtualization detection more
similar to architecture detection.
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
String which ended in an unfinished quote were accepted, potentially
with bad memory accesses.
Reject anything which ends in a unfished quote, or contains
non-whitespace characters right after the closing quote.
_FOREACH_WORD now returns the invalid character in *state. But this return
value is not checked anywhere yet.
Also, make 'word' and 'state' variables const pointers, and rename 'w'
to 'word' in various places. Things are easier to read if the same name
is used consistently.
mbiebl_> am I correct that something like this doesn't work
mbiebl_> ExecStart=/usr/bin/encfs --extpass='/bin/systemd-ask-passwd "Unlock EncFS"'
mbiebl_> systemd seems to strip of the quotes
mbiebl_> systemctl status shows
mbiebl_> ExecStart=/usr/bin/encfs --extpass='/bin/systemd-ask-password Unlock EncFS $RootDir $MountPoint
mbiebl_> which is pretty weird
Otherwise the add_symlink() function tries to make directories for
each slash even for the slash after the @ symbol in the final link
name, failing for /dev/3270/tty1.
Based on a patch by Werner Fink <werner@suse.de>.
Add the first 3270 terminal device that is associated with the Linux preferred
console to the list of virtualization consoles. This is required to
automatically start a getty if the conmode=3270 kernel parameter is specified
for Linux on z/VM instances. Note that a queued upstream patch also enable
the 3270 terminal device if it is associated with the Linux preferred console.
How
To successfully start agetty on a 3270 terminal, a change in the agetty
parameter order is required. Previously, agetty would started like this:
/sbin/agetty --keep-baud 3270/tty1 115200,38400,9600 TERM
The agetty program interprets the "3270/tty1" as baud rate and fails to start
with the "bad speed: 3270/tty1" error message. Fixing this in agetty is more
complex rather than reordering the command line parameters like this:
/sbin/agetty --keep-baud 115200,38400,9600 3270/tty1 TERM
According to agetty sources and "agetty --help", agetty accepts the "tty",
"baudrate tty", and "tty baudrate" specifications.
P.S. The "tty: Set correct tty name in 'active' sysfs attribute" introduces
a change to display the terminal device which is associated with the
Linux preferred console. This change helps to let systemd handle this
particular case only. Without the changes of this commit, no additional
3270 terminal device can be managed by systemd.
https://git.kernel.org/cgit/linux/kernel/git/gregkh/tty.git/commit/?id=723abd87f6e536f1353c8f64f621520bc29523a3
The ttyS[0-3] devices are weird. They may be enumerated, but when one
actually tries to open and use them they return EIO, because they don't
actually exist. Because they may be enumerated they may be specified on
the kernel command line as console=. And some people do that as default.
As response to that we'll spawn a getty on the tty that will quickly
fail, and we retry a couple of time before giving up. That is quite
noisy.
With this new change we will validate all serial terminals configured
with console= on the kernel cmdline before adding gettys on them, and
remove the invalid ones. THis should remove the noise later on.
This should make Eric Paris happy!
Ensure to start getty programs on all essential system consoles on Linux on
System z. Add these essential devices to the list of virtualization_consoles
to always generate getty configurations.
For the sake of completion, the list of essential consoles is:
/dev/sclp_line0 - Operating system messages applet (LPAR)
/dev/ttysclp0 - Integrated ASCII console applet (z/VM and LPAR)
/dev/ttyS0 - Already handled by systemd (3215 console on z/VM)
/dev/hvc0 - Already handled by systemd (IUCV HVC terminal on z/VM)
Depending on the environment, z/VM or LPAR, only a subset of these terminals
are available.
See also RH BZ 860158[1] "Cannot login via Operating System Console into RHEL7
instance installed on a LPAR". This bugzilla actually blocks the installation
of Linux on System z instances in LPAR mode.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=860158
