Usecase is to allow changing the final kill from SIGKILL to SIGQUIT which
should create a core dump useful for debugging why the service didn't stop
with the SIGTERM
Currently the completion adds template units for commands such as
is-active, is-failed, is-enabled, status, show and others.
At the same time systemctl barfs at us, since an instanced template unit
is needed. Follow the example list from bash-completion as to which
commands should not list template units.
Note: The above is observed regardless of DefaultInstance.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Template units lacking DefaultInstance cannot be enabled/disabled or
started/restarted.
By adding DefaultInstance the unit can be enabled/disabled but it
still cannot be started/restarted.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Earlier patch added the current word to the performance critical paths.
Here we add it to every place, for consistency sake.
Suggested-by: Yu Watanabe (yuwata)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This effectively ports over b1bdb6496c
from the bash completion to zsh.
Modulo the new function, since it's unrelated perf. improvement.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Using a leading * and $SUFFIX produces misleading results. Let's imagine
that one mistypes nect instead of netc, they will get a rather
misleading completion like: sys-fs-fuse-connections.mount
Not to mention that the execution time is up by ~1/3.
time systemctl list-unit-files netctl* -> ~12ms
time systemctl list-unit-files *netctl* -> ~17ms
Furthermore more units are matched, leading to greater execution time
of `systemctl show' in _filter_units_by_property
Use only $PREFIX*, removing the leading * and trailing $SUFFIX*.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
When dealing with a large number of template instances, for example
when launching daemons per VRF, it is hard for operators to correlate
log lines to arguments.
Add a new with-unit mode which, if available, prefixes unit and user
unit names when displaying its log messages instead of the syslog
identifier. It will also use the full timestamp with timezones, like
the short-full mode.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Suspend to Hibernate is a new sleep method that invokes suspend
for a predefined period of time before automatically waking up
and hibernating the system.
It's similar to HybridSleep however there isn't a performance
impact on every suspend cycle.
It's intended to use with systems that may have a higher power
drain in their supported suspend states to prevent battery and
data loss over an extended suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
That way, they're always sorted by date. I do not know how to make ZSH sort
them by PID through some option, but that doesn't seem very useful in the first
place.
An output from coredumpctl list is like
> TIME PID UID GID SIG COREFILE EXE
> Sun 2016-05-29 18:44:03 CEST 14578 1000 1000 6 none /tmp/pacaurtmp-wieland/python33/src/Python-3.3.6/python
^1 ^2 ^3 ^4 ^5
, but the previous sub() command turns that into
> TIMEPID UID GID SIG COREFILE EXE
> Sun2016-05-29 18:44:03 CEST 14578 1000 1000 6 none /tmp/pacaurtmp-wieland/python33/src/Python-3.3.6/python
^1 ^2 ^3 ^4 ^5
so the whole pipeline generated entries like
$UID:$DESCRIPTION
but that's not useful and probably not what was supposed to happen.
This now generates entries like
$PID:$DESCRIPTION
which make everything work.
Note that with this commmit, the completions will be sorted by PID by
ZSH.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
This change noticeably increases completion performance at the expense
of preventing possible _correct, _approximate or any matcher-list rules.
Still, responsiveness increase so huge seems to make it worth the price.
The configuration option was called -Dresolve, but the internal define
was …RESOLVED. This options governs more than just resolved itself, so
let's settle on the version without "d".
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
They’re counterparts to the existing set-log-level and set-log-target
verbs, simply printing the current value to stdout. This makes it
slightly easier to temporarily change the log level and/or target and
then restore the old value(s).
Since busname units are only useful with kdbus, they weren't actively
used. This was dead code, only compile-tested. If busname units are
ever added back, it'll be cleaner to start from scratch (possibly reverting
parts of this patch).
Using conf.set() with a boolean argument does the right thing:
either #ifdef or #undef. This means that conf.set can be used unconditionally.
Previously I used '1' as the placeholder value, and that needs to be changed to
'true' for consistency (under meson 1 cannot be used in boolean context). All
checks need to be adjusted.
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
Add the 'convertible' type to the set of allowed chassis. This applies
to all devices that can be transformed by the user from laptop style to
tablet style.
This does not add any auto-detection, yet. It only makes 'set-chassis'
accept 'convertible' as valid input.
'systemctl --failed' is an extremely common operation and it's nice to have
a shortcut for it.
Revert "man: don't document systemctl --failed" and add the option back to
systemctl's help and shell completion scripts.
This reverts commit 036359ba8d.
allow _journalctl to work when the rcquotes option is set, broken in ba89f80620.
allow the completion of --file multiple times, which ba89f80620 claims is true.
Fixes#4842
I found several issues with zsh completion code:
1. typo in cache filename: "SYS_ALL_PROPRTIES", so cache just not loading from this file
2. cache stored in one file, despite user or system mode. So it can be loaded later in wrong mode
3. most serious problem: broken logic - it retrieves cache when _cache_invalid is true
How to reproduce: type "systemctl --user status <TAB>" and you will see user units. Then press
control+C and type "systemctl --system status <TAB>" in same session and you'll see user units again
Escape unit names for the eval call in _call_program
The value of the Id property is transformed back into a unit name
usable by systemctl.
system-systemd\x5cx2dcryptsetup.slice -> system-systemd\x2dcryptsetup.slice
Also filter units by property via parameter expansion, not a for loop
After `journalctl -D /var/log/journal` "--directory", "--file",
"--machine" and "--root" should not be available for completion, because
they are exclusive. But multiple `--file` arguments are allowed.
In 68c4f6d the following was added:
local -a _modes; _modes=("--user" "--system")
local _sys_service_mgr=${${words:*_modes}[(R)(${(j.|.)_modes})]:---system}
With the following comment:
> If neither are on the line, --system is set; for system services to be
> completed.
But it does not work as documented:
% _modes=(--user --system)
% words=()
% echo ${${words:*_modes}[(R)(${(j.|.)_modes})]:---system}
However, it should not use `--system` in that case anyway, so this patch
removes the part that should cause a default to be used and adds some
comments.
This only completes fields from `journalctl --user` in _journal_fields when `--user`
is used.
It also changes $_sys_service_mgr to include both `--system` and `--user`,
because `journalctl` behaves different from `systemctl` in this regard.
No attempt is made to filter out invalid combinations, e.g. when using both
`--directory` and `--system` (see https://github.com/systemd/systemd/issues/3949).
This uses the same mechanism from _systemctl to inject `--user` into the
`journalctrl -F _EXE` call to list executables.
Before this patch the "commands" section would list executables from
system units always.
Use `$_sys_service_mgr` to handle `--user`, so that `systemctl --user
stop` will correctly filter the active (user) units. Before this patch,
only user units that also exist as system units and are stoppable there
would be listed.
This new output mode formats all timestamps using the usual format_timestamp()
call we use pretty much everywhere else. Timestamps formatted this way are some
ways more useful than traditional syslog timestamps as they include weekday,
month and timezone information, while not being much longer. They are also not
locale-dependent. The primary advantage however is that they may be passed
directly to journalctl's --since= and --until= switches as soon as #3869 is
merged.
While we are at it, let's also add "short-unix" to shell completion.
This patch renames Read{Write,Only}Directories= and InaccessibleDirectories=
to Read{Write,Only}Paths= and InaccessiblePaths=, previous names are kept
as aliases but they are not advertised in the documentation.
Renamed variables:
`read_write_dirs` --> `read_write_paths`
`read_only_dirs` --> `read_only_paths`
`inaccessible_dirs` --> `inaccessible_paths`
Support for net_cls.class_id through the NetClass= configuration directive
has been added in v227 in preparation for a per-unit packet filter mechanism.
However, it turns out the kernel people have decided to deprecate the net_cls
and net_prio controllers in v2. Tejun provides a comprehensive justification
for this in his commit, which has landed during the merge window for kernel
v4.5:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=bd1060a1d671
As we're aiming for full support for the v2 cgroup hierarchy, we can no
longer support this feature. Userspace tool such as nftables are moving over
to setting rules that are specific to the full cgroup path of a task, which
obsoletes these controllers anyway.
This commit removes support for tweaking details in the net_cls controller,
but keeps the NetClass= directive around for legacy compatibility reasons.
But also keep the old name as (undocumented) compatibility around.
The reload-or-try-restart was documented to be a NOP if the unit is not running, since the previous commits this is
also implemented. The old name suggests that the "try" logic only applies to restarting. Fix this, by moving the "try-"
to the front, to indicate that the whole option is a NOP if the service isn't running.
Escape colons and backslashes in unit names.
This gives correct completions for units with names like
systemd-backlight@backlight:acpi_video0.service
and
systemd-fsck@dev-disk-by\x2duuid-...
The current code is not compatible with current dkr protocols anyway,
and dkr has a different focus ("microservices") than nspawn anyway
("whole machine containers"), hence drop support for it, we cannot
reasonably keep this up to date, and it creates the impression we'd
actually care for the microservices usecase.
This directive allows passing environment variables from the system
manager to spawned services. Variables in the system manager can be set
inside a container by passing `--set-env=...` options to systemd-spawn.
Tested with an on-disk test.service unit. Tested using multiple variable
names on a single line, with an empty setting to clear the current list
of variables, with non-existing variables.
Tested using `systemd-run -p PassEnvironment=VARNAME` to confirm it
works with transient units.
Confirmed that `systemctl show` will display the PassEnvironment
settings.
Checked that man pages are generated correctly.
No regressions in `make check`.
Snapshots were never useful or used for anything. Many systemd
developers that I spoke to at systemd.conf2015, didn't even know they
existed, so it is fairly safe to assume that this type can be deleted
without harm.
The fundamental problem with snapshots is that the state of the system
is dynamic, devices come and go, users log in and out, timers fire...
and restoring all units to some state from the past would "undo"
those changes, which isn't really possible.
Tested by creating a snapshot, running the new binary, and checking
that the transition did not cause errors, and the snapshot is gone,
and snapshots cannot be created anymore.
New systemctl says:
Unknown operation snapshot.
Old systemctl says:
Failed to create snapshot: Support for snapshots has been removed.
IgnoreOnSnaphost settings are warned about and ignored:
Support for option IgnoreOnSnapshot= has been removed and it is ignored
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034872.html
_loginctl: respects the verbose style. which allows a user to get
the pre d5df0d950f behavior of not showing a description for sessions
and users, by default they aren't shown.
zstyle ':completion:*' verbose true
or
zstyle ':completion:*:loginctl*:*' verbose true # or similar
Will show the descriptions.
zstyle ':completion:*' verbose true
and
zstyle ':completion:*:loginctl*:*' verbose false # or similar
Won't show descriptions for loginctl only
_systemd: complete pids for systemd-notify's --pid option.
display a message of the expected argument for other options.
_systemd-inhibit: complete block & delay for --mode
display a message of the expected argument for --who/--why
filenames will be completed for --image/-i/--bind/--bind-ro/--tmpfs
network interfaces for --network-(interface|macvlan|ipvlan|bridge)
users for --user/-u, yes & no for --register, x86 * x86-64 for
--personality
display a message of the expected argument for --machine/-M/--uuid
--slice/-S/--port/-p/--selinux-*/-Z/-L/--setenv
Allow completing commands(and their options) of the host system for COMMAND
1) the iterator `fun' has an local scope. after running the completer,
it will no longer be defined.
2) use _describe instead of calling compadd. Using compadd without
calling _description or something similar before, restricts the
user's ability to customize what is presented to them.
zstyle ':completion:*' format 'Completing %d'
- now displays an header showing what is being completed.
zstyle ':completion::complete:loginctl-*::users' users user1 user2
- allows the user to manually specify which users is offered
zstyle :completion::complete:loginctl-kill-user:\* \
ignored-patterns '(100<0-4>|user1)'
- selectively ignore some users when completing loginctl kill-user
<tab>
Sessions, UIDs now have descriptions when selecting them.
3) removed the call to _loginctl_all_seats in _loginctl_attach(), since
_loginctl_seats calls it a second time, right before adding matches.
There isn't a noticeable difference doing this.
Optimize _filter_units_by_property by calling `systemctl` only once with
a list of units, and not once per unit.
I could not reproduce the "Unknown unit" error mentioned in a FIXME,
which might have made this necessary previously.
using _wanted instead of calling compadd directly. this allows the user to customize
possible matches.
An example being, grouping units by type:
autoload -Uz compinit; compinit
zstyle ':completion:*' menu select
zstyle ':completion:*' group-name ''
zstyle ':completion:*' format 'Completing %d'
zstyle -e ':completion:*:*:systemctl-(((re|)en|dis)able|(*re|)start|reload*):*' \
tag-order 'local type; for type in service template target socket;
reply+=( systemd-units:-${type}:${type} ); reply=( "$reply systemd-units:-misc:misc" )'
zstyle ':completion:*:systemd-units-template' ignored-patterns '^*@'
zstyle ':completion:*:systemd-units-target' ignored-patterns '^*.target'
zstyle ':completion:*:systemd-units-socket' ignored-patterns '^*.socket'
zstyle ':completion:*:systemd-units-service' ignored-patterns '^*.service'
zstyle ':completion:*:systemd-units-misc' ignored-patterns '*(@|.(service|socket|target))'
also, <poke> http://lists.freedesktop.org/archives/systemd-devel/2015-May/032012.html
By the time __systemctl is called, --user/--system are shifted out of
`words' by _arguments. This patch queries the array sooner.
In the case that both --user and --system are on the line when compsys runs,
_sys_service_mgr is set to the latter. Which is seemingly how systemctl behaves.
If neither are on the line, --system is set; for system services to be completed.
compadd's -a option treats non-option arguments as arrays. So
$(_systemctl_get_template_names) expands to some words that aren't
legal array names. Even if there were, they would be empty; thus adding
nothing.
deduplicated a few functions too.
This makes all functions that rely on _filter_units_by_property() (like
_systemctl_{stop,kill,try_restart}) work with unit names that contain backslash
escaped sequences (like automount units with spaces that are escaped to
"\x20").
We really don't want to get lost in adding fridge, car, plane, drone, or
whatever else, hence add a generic term "embedded" cover all the cases
where the computer is just part of something bigger, and not at the
focus of things.
Templates can be [re]enabled, on their own if the have DefaultInstance set,
and with an instance suffix in all cases. Propose just the template name
ending in @, to underline the instance suffix may have to be appended.
Likewise for start/restart.
This means that sometimes superflous units that one will not really
want to operate on will be proposed, but this seems better than
proposing a very incomplete set of names.
https://bugs.freedesktop.org/show_bug.cgi?id=66912
removed pointless index sort of bootids.
use `compadd -a' to add each array, instead of expanding possibly hundreds of words needlessly.
optional completion of -b
-- fix grammar and reword some descriptions for clarity
-- add a useful description of what --follow does
-- fix the description for --after-cursor
-- properly introduce the FSS acronym for "Forward Secure Sealing" in
both sections
-- clarify the --disk-usage command
[zj: perform similar changes to zsh completions]
squash! journalctl: fix several issues in --help message text
Instead of having two different listings of machines, use an autoloaded
function that can be used by other shell completions in the future. It
will also allow editing a single file to change the way machinectl and
systemd-run completion for machines.
Suggested by David Wilkins <dwilkins@maths.tcd.ie> in
https://bugzilla.redhat.com/show_bug.cgi?id=967521:
> [Specific boot ID is a] bit of a palaver to obtain. I consulted the
> verbose dump of the journal to discover the _BOOT_ID for the
> timestamp, and then generated the journal dump for that boot using
> journalctl _BOOT_ID=foo -o short-monotonic.
_SYSTEMD_USER_UNIT in the --user-unit flag argument should instead be
USER_UNIT. It should also have an optional `=` between the flag and the
argument.
Things like -n to specify the lines to show with systemctl and
journalctl accepts syntax like:
journalctl -n4
systemctl -n14
Previously, typing `-nXX <tab>` where XX is a number, zsh would try to
complete an integer. Now it will see the XX and use the _journalctl_none
completion. This is also how any of the single letter options that take
arguments work as well.
Some of the options in systemd can take multiple arguments, such as
systemctl's --type option. Previously, you would only be able to
complete a single type after the -t, but now zsh will continue to
complete the types, separating them by commas.
systemd-inhibit's --what command has colon (:), and that has been taken
into account.
_hosts_or_user_at_host was used by 6 different completions, and
previously was in all 6 of those files. I moved it out to its own file,
_sd_hosts_or_user_at_host. This will be autoloaded for use in other
completion functions. It also allows external completions to use this
function by simply calling _sd_hosts_or_user_at_host as in the systemd
completions.
Splitting things unnecessarily at newlines causes tab completion to take
an extremely long time. Also add a note saying that caching is not good
for journalctl's completion.
Moved zsh shell completion to shell-completion/zsh/_systemd for
automake's sake. Also allow users to specify where the files should go
with::
./configure --with-zshcompletiondir=/path/to/some/where
and by default going to `$datadir/zsh/site-functions`
