Mark of the unicorn (MOTU) shipped FireWire series. The configuration ROM
in the models of series has some quirks and against standard of 1394
Trading Association.
This commit adds database entries for the models. ALSA firewire-motu driver
supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TEAC Corporation shipped FireWire series in its TASCAM brand. The
configuration ROM in the models of series has some quirks and against
standard of 1394 Trading Association.
This commit adds database entries for the models. ALSA firewire-tascam
driver supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Avid Audio shipped Digi 00x family in its Digidesign brand. The
configuration ROM in the models of family has some quirks and against
standard of 1394 Trading Association.
This commit adds database entries for the model. ALSA firewire-digi00x
driver supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Solid State Logic, Ltd. shipped some models based on DICE ASICs. The
content of configuration ROM has a quirk that the value of category
field is unique (0x51 or 0x52).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Harman International Industries, Inc. shipped some models based on DICE
ASICs in its Lexicon brand. The content of configuration ROM has a quirk
that the value of category field is unique (0x20).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
LOUD Audio, LLC (formerly known as LOUD Technologies, Inc.) shipped some
models based on DICE ASICs in its Mackie brand. The content of
configuration ROM has a quirk that the value of category field is unique
(0x10).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Weiss Engineering Ltd. shipped some models based on DICE ASICs. The
content of configuration ROM has a quirk that the value of category
field is unique (0x00).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
M-Audio shipped some models based on DICE ASICs. The content of
configuration ROM has a quirk that the value of version field in unit
directory is different from the one in TCAT specification (0x000001).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TC Applied Technologies designed the series of ASIC for audio and music
data transmission in several types of communication bus. It's named as
Digital Interface Communication Engine (DICE). Four ASICs are known in
the series for IEEE 1394 bus; Dice II, TCD2210 (Dice Jr.), TCD2220 (Dice
Mini), and TCD3070 (DiceIII).
The content of configuration ROM in products based on DICE ASICs is
known against specification defined by 1394 Trading Association.
This commit adds database entries for models without any customization by
vendors. In TCAT specification, The value of GUID field is split to four
parts; 24-bit OUI, 8-bit category, 10-bit product ID, and 22-bit serial
number in the order. In the specification, the value of category field is
fixed to 0x04. The root directory includes leaf entries for vendor and
model names. Although the specifier_id field in unit directory differs
depending on vendors, the version field in unit directory is fixed to
0x000001. ALSA dice driver supports them, but expects userspace
application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Once Oxford Semiconductor designed FW970 and FW971 ASICs as Multi-Channel
Isochronous Streaming FireWire Audio Controller. Some vendors used them
in their products for audio and music units.
The content of configuration ROM has standard layout of 1394 Trading
Association with an additional Dependent Information directory.
This commit adds database entries for the known models. ALSA oxfw
driver supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Echo Audio Corporation designed Fireworks board module. The module is used
by several vendors for models.
The content of configuration ROM in the models s some quirks and against
standard of 1394 Trading Association.
This commit adds database entries for the model. ALSA fireworks driver
supports them but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
ArchWave AG, formerly known as BridgeCo. AG, designed DM1000, DM1100, and
DM1500 ASICs for BridgeCo. Enhancement BreakOut Box (BeBoB) solution.
They were used for many models shipped by many vendors.
The content of configuration ROM has standard layout of 1394 Trading
Association with an additional Dependent Information directory.
This commit adds database entries for the known models. ALSA bebob
driver supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Although in IEEE 1394 unit function list I have a plan to use slash sign
in name of property, current implementation of parser doesn't allow it.
When parsing current entries in database excluded from parser testing, we
can find usage of slash sign in name of property.
This commit adds slash sign in allow list of the parser for my
convenience.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In added IEEE 1394 unit function list, I use custom key to detect unit
entries in node context. Although the list is not widely used in the most
of systemd users, I would like to add parser grammar for testing, by
borrowing a bit time in builders.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Current udev rules configures group owner of firewire character device
to video group, corresponding to nodes in IEEE 1394 in below cases:
1.the node with any unit for any minor version of IIDC version 1
specification defined by 1394 Trading Association
2.the node with any unit for specification defined by Point Grey Research
3.the node with any unit for AV/C device v1.0 defined by 1394 Trading
Association
4.the node with any unit for vendor-unique protocol defined by 1394
Trading Association
Nevertheless, case 3 and 4 can cover the node with any unit for audio
function as well. In the cases, it's convenient to assign audio group.
Additionally, some nodes are known to have layout different from
the specification defined by 1394 Trading Association. In the case,
it's required to add rules specific to them.
Furthermore, some nodes have no fields for vendor name and model name in
configuration ROM. In the case, it's required to add entries to hardware
database for users convenience.
For the above reasons, this commit adds rules to use information in
hardware database for known units in IEEE 1394. One database entry
corresponds to one unit. Two types of key are used to match the unit;
customized key from node context, kernel modalias of unit context.
The entry has the type of function, at least. Supplementally, it has
vendor and model names.
For your information, below statements with Python pyparsing module are
expected to parse all of the custom key and module alias in the list:
```
subsystem_prefix = pp.Literal('ieee1394:').suppress()
hex_to_int = lambda a: int(a[0], 16)
node_prefix = pp.Literal('node:').suppress()
prefixed_lower_hex = pp.Combine(pp.Literal('0x') + pp.Word(pp.srange('[a-z0-9]'), exact=6)).setParseAction(hex_to_int)
ven_in_node = pp.dictOf(pp.Literal('ven'), prefixed_lower_hex)
mo_in_node = pp.dictOf(pp.Literal('mo'), prefixed_lower_hex)
unit_in_node = pp.Group(prefixed_lower_hex + pp.Literal(':').suppress() + prefixed_lower_hex)
units_in_node = pp.Group(pp.Literal('units') + pp.ZeroOrMore(pp.Literal('*')).suppress() + unit_in_node + pp.ZeroOrMore(pp.Literal('*')).suppress())
node_parser = subsystem_prefix + node_prefix + ven_in_node + pp.Optional(mo_in_node) + units_in_node
higher_hex = pp.Word(pp.srange('[A-Z0-9]'), exact=8).setParseAction(hex_to_int)
ven_in_unit = pp.dictOf(pp.Literal('ven'), higher_hex)
mo_literal_in_unit = pp.dictOf(pp.Literal('mo'), higher_hex)
mo_in_unit = pp.dictOf(pp.Literal('mo'), higher_hex ^ pp.Literal('*'))
sp_in_unit = pp.dictOf(pp.Literal('sp'), higher_hex)
ver_in_unit = pp.dictOf(pp.Literal('ver'), higher_hex)
unit_parser = subsystem_prefix + ven_in_unit + mo_in_unit + sp_in_unit + ver_in_unit
key_parser = node_parser ^ unit_parser
```
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Dell new Privacy feature provide new hardware level privacy
protect for users
This patch remaps scancode 0x120001 to key code F20 micmute
The old matching string cannot cover some other Dell products
which have the privacy feature,expand the string to all the system
that can load the privacy driver,privacy driver already detect the
system if it can support this feature. So here we can safely just
map the micmute key to scancode 0x120001
Signed-off-by: Perry Yuan <perry_yuan@dell.com>
The additional rules fix a firmware bug in the en keyboard of Librem notebooks by Purism.
By doing so the break the keyboard with other layouts which do not have the same bug in their firmware.
The device is very similar to MACH-WX9 in many ways, including this
particular one. Adding these rules gets rid of evdev warnings as buttons
are being pressed on this device.
As documented at the top of the file we require the normal property if we have
the horizontal property, and we require the CLICK_ANGLE property if the
CLICK_COUNT property is present. Codify this into the hwdb parser so we can
pick up on it.
The script is renamed to match.
Now all targets are named uniformly in a tab-completion-friendly fashion, with
the exception of systemd-update-po which is generated by the i18n module
automatically:
$ ninja -C build -t targets | grep update
systemd-update-po: phony
update-syscall-tables: phony
update-syscall-header: phony
update-hwdb: phony
update-hwdb-autosuspend: phony
update-dbus-docs: CUSTOM_COMMAND
update-man-rules: CUSTOM_COMMAND
It is only the Samsung 900X3A which has the alternative function keys.
The 900X3B, 900X4B have the standard Series 9 layout - as defined above.
Note: the 900X4A is not a valid laptop model.
libfprint includes a list of known fingerprint readers that can be
autosuspended. Upstream libfprint generates this file from the USB IDs
registered to drivers and a list of well-known readers that are
currently unsupported.
Closes: #17663
Added Cube Mix Plus (i18B) Rotation information.
Also Combined the sensor lines with the different Cube i7 stylus models because they use the same ACCEL_MOUNT_MATRIX
This fixes the following warning:
```
parse_hwdb.py:120: UserWarning: warn_ungrouped_named_tokens_in_collection: setting results name 'SETTINGS*' on And expression collides with 'HZ' on contained expression
dpi_setting = (Optional('*')('DEFAULT') + INTEGER('DPI') + Suppress('@') + INTEGER('HZ'))('SETTINGS*')
```
Not sure about for the mount_matrix, but LGTM.com warns in that line,
and, adding Group() does not change the parse result.
Only some small changes, because we updated recently. As usual, it seems that there are mostly
additions with a smaller amount of corrections, no big removals.
The Lenovo ThinkPad Yoga 11e 360 degree hinges style 2-in-1s use 2
accelerometers, 1 in the display and 1 in the base.
Kernel work is under way to also export the second accelerometer in
the base as an iio-device; and userspace work is underway to use
both accelerometers on 360 degree hinges style 2-in-1s (with 2 accels)
to figure out the angle between the 2 halves.
So far most orientation-matrix quirks have not cared much about the
Z-axis being correct, but in these 2 accelerometer setups getting
the Z-axis correct is important too.
The KIOX010A and KIOX02A ACPI hw-ids (HIDs) are used in 360 degree hinges
style 2-in-1s which have 2 accelerometers, 1 in the display (as usual) and
a second accelerometer in the base.
So far 60-sensor.hwdb has only defined a mount-matrix for the
sensor with the KIOX010A HID, which is the sensor in the display
half of the device. The reason for this is that sofar userspace has
only cared actually used the sensor in the display (for automatic
display rotation. Work is underway to make userspace use both sensors:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Recently an entry was added for the Medion Akoya's E2221T base-sensor,
but that was added to mark it with ACCEL_LOCATION=base and the entry
simply used the identity-matrix for ACCEL_MOUNT_MATRIX since nothing
is using the mount-matrix info for the second accelerometer.
I believe that this entry was added because on some devices the second
accelerometer gets enumerated first and then iio-sensor-proxy will
wrongly use the second sensor for display-rotation, unless it is marked
with ACCEL_LOCATION=base.
Instead of adding info for the second accelerometer on a per device
basis use the same generic dmi matches as used for the first (KIOX010A)
sensor, replacing the special case added for the E2221T and also
update the ACCEL_MOUNT_MATRIX with the actual mount-matrix for the
KIOX020A sensor in the base of these devices.
This was tested on a Medion Akoya E2228T.
Document how the mount-matrix for the base-accelerometer must be set on
360 degree hinges style 2-in-1s with 2 sensors (one in the display and
1 in the base).
Note the choice to define the lid being fully closed as an angle of
0 degrees is based on the ACPI tables of devices with a BOSC0200
ACPI device-node describing both sensors. In this case the ACPI
tables contain mount-matrix info (and the kernel will soon support
reading this and exporting it to userspace) and the mount-matrices
defined in these ACPI tables are such that the angle of the G-force
vector measured by the sensors is identical for both sensors when
the laptop's lid is fully closed.
This also feels more natural then defining the laptop being fully
open (180 degrees open) as the home / 0 degree angle position.
2 updates to the Logitech MX5000 key mappings:
1. Fix Logitech MX5000 Media key mapping:
The MX5000 has a key clearly marked "media" (in text) and when they gets
pressed the keyboards LCD briefly shows "MEDIA" in a big font.
Yet the keyboard sends a HID usage code which according to the HUTT
is config/control-panel. Map this to media so that the key behaves as
labeled.
2. Add mapping for the scan-code send by the Fn on/off toggle key
The Logitech Dinovo Edge has 5 special hotkeys, one with a phone symbol
and the 4 usual Logitech A-D smartkeys. These send custom Logitech
0xc10xx keycodes, add mappings for these.
Some Logitech wireless keyboards report when there Fn key is pressed,
add a mapping for this.
While it also fix identiation of 2 adjescent key-maps to use tabs like the
other Logitech entries
Dell new Privacy feature provide new hardware level privacy
protect for users,it needs to map the scan code to F20 micmute
Signed-off-by: Perry Yuan <perry_yuan@dell.com>
This is useful for development where overwriting files out side
the configured prefix will affect the host as well as stateless
systems such as NixOS that don't let packages install to /etc but handle
configuration on their own.
Alternative to https://github.com/systemd/systemd/pull/17501
tested with:
$ mkdir inst build && cd build
$ meson \
-Dcreate-log-dirs=false \
-Dsysvrcnd-path=$(realpath ../inst)/etc/rc.d \
-Dsysvinit-path=$(realpath ../inst)/etc/init.d \
-Drootprefix=$(realpath ../inst) \
-Dinstall-sysconfdir=false \
--prefix=$(realpath ../inst) ..
$ ninja install
I tested this on my ZBook Studio G5. I'm not sure if this works for other ZBook studio machines.
I have two more notes on this PR:
- some keys send multiple scancodes. I matched only on one of them, because I couldn't figure out how to match
on all of them. This results in the others still being visible:
Event: time 1604520228.146226, -------------- SYN_REPORT ------------
Event: time 1604520228.151533, type 4 (EV_MSC), code 4 (MSC_SCAN), value db
Event: time 1604520228.151533, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 1
Event: time 1604520228.151533, -------------- SYN_REPORT ------------
Event: time 1604520228.259862, type 4 (EV_MSC), code 4 (MSC_SCAN), value 38
Event: time 1604520228.259862, type 1 (EV_KEY), code 56 (KEY_LEFTALT), value 0
Event: time 1604520228.259862, -------------- SYN_REPORT ------------
Event: time 1604520228.259944, type 4 (EV_MSC), code 4 (MSC_SCAN), value 66
Event: time 1604520228.259944, type 1 (EV_KEY), code 218 (KEY_CONNECT), value 0
Event: time 1604520228.259944, -------------- SYN_REPORT ------------
Event: time 1604520228.266513, type 4 (EV_MSC), code 4 (MSC_SCAN), value db
Event: time 1604520228.266513, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 0
Event: time 1604520228.266513, -------------- SYN_REPORT ------------
I wanted to set the display key to switchvideomode, but another key is already set to that, so I set it to displaytoggle instead.
Pinebook Pro's display brightness up & down keys do not work until the
keys are mapped to the corresponding codes.
Also, the sleep key is mapped to KEY_POWER code originally. This quirk
maps the sleep key to the KEY_SLEEP code.
This idea comes from the pinebookpro-post-install package [1] of Manjaro
ARM, which is the preloaded OS on Pinebook Pro.
[1]: 7ab1a134ea
This reverts commit c0443b97b7.
I got various cases wrong:
"usb:v04F3p2B7Cd5912dc00dsc00dp00ic03isc00ip00in00"
"usb:v0627p0001:QEMU USB Tablet"
"input:b0003v0627p0001e0001-e0,1,2,4,k110,111,112,r0,1,8,B,am4,lsfw"
OTOH:
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
is OK. Other parts follow after 'pn'.
-mouse:*:name:*Trackball*:*
-mouse:*:name:*trackball*:*
-mouse:*:name:*TrackBall*:*
+mouse:*:name:*Trackball*:
+mouse:*:name:*trackball*:
+mouse:*:name:*TrackBall*:
... and anything else with :name should be OK too, because our imports always
include ":" at the end:
IMPORT{builtin}="hwdb 'joystick:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'"
Including '*' at the end makes the pattern work even if we decide to add
something to the match string later.
Fixes#17499.
The properties are not unquoted by udev, so the quotes effectively became part
of the value.
Even though those properties were added quite a while ago
(086c001e29,
d7d31692bf), they never started being used
(because of issues with having multiple layouts), see
https://gitlab.gnome.org/GNOME/mutter/-/issues/906,
https://bugzilla.gnome.org/show_bug.cgi?id=775681.
Let's remove the quotes while we still can.
From https://bugzilla.gnome.org/show_bug.cgi?id=775681#c7:
> Note to self: the values for XKB_FIXED_LAYOUT and XKB_FIXED_VARIANT are
> quoted, meaning that we need to remove the quotes before passing the values
> from udev_device_get_property_value() to xkb_keymap_new_from_names()
> otherwise the compilation of the keymap fails (please don't ask how I found
> out...)
No functional change is intended.
The general pattern of changes:
-usb:v04F3p2B7C*
+usb:v04F3p2B7C:*
This is mostly a clarification, to make the part that makes the usb vXXXXpYYYY
part visually separated. It would only make a difference if we added further
keys with a different number of digits, which is unlikely.
-usb:v0627p0001:*QEMU USB Keyboard*
-usb:v0627p0001:*QEMU USB Mouse*
-usb:v0627p0001:*QEMU USB Tablet*
+usb:v0627p0001:*QEMU USB Keyboard*:*
+usb:v0627p0001:*QEMU USB Mouse*:*
+usb:v0627p0001:*QEMU USB Tablet*:*
Again, only a clarification. We know that ":" will appear somewhere later in
the match key, so anything that matches "…Keyboard*" will also match "…Keyboard*:*".
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
This makes the match narrower. Previously we would match product "N53SV"
and "N53SV2", "N53SV3", and others. Here we are saying that the ':pn' part must
match exactly. Most of the changes in this patch match this pattern. I made a few
judgement calls and used "pn…*:*" when I wasn't sure if the full pn is included:
-evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*
+evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*:*
-evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:
+evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:*
This more like the "QEMU" example above, since all dmi strings end in ":", so
anything which matches the old version will also match the new version.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:pvr*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:*
I replaced trailing ":pvr*" by ":*". This makes no functional difference because
we expect "pvr" to always appear in the dmi string. This makes patterns shorter.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*:*
OTOH, ":pn*" is kept. This is because almost patterns include ":pn*", and if we
skip it, we should make it clear that this is on purpose, that we really want to
match any product name.
The python script to generate autosuspend rules is updated to use ":*" too.
Inspired by https://github.com/systemd/systemd/pull/17281#discussion_r501489750.
I'm keeping this part separate because a function change is intended here.
Those patterns didn't match:
$ systemd-hwdb query 'evdev:atkbd:dmi:bvn_:bvr_:bd_:svnLENOVO:pn_:pvrThinkPadT430s'
KEYBOARD_LED_CAPSLOCK=0
$ systemd-hwdb query 'evdev:atkbd:dmi:bvn_:bvr_:bd_:svnLENOVO:pn_:pvrThinkPadT430s:'
(nil)
This commit add calendar and micmute hotkeys for HP EliteBook Folio G1, and also correct name of other laptop from HP EliteBook Folio series - HP EliteBook Folio 1040 G2
1. rfkill hotkey is reported from three source: keyboard, Intel HID and HP Wireless hotkeys. Let's block first two.
2. Correct mapping for calendar, micmute, display and brightness hotkeys.
Different bios version includes different pn. Submitted change fixed my inverted screen after reboot.
I've stepped back to the bios version 5.11 28.04.2016 in an attempt to troubleshoot Windows Hello locking the sign
in on reboot. The screen again rotated, but 90 degrees to the right. I created a new hwdb line to resolve that issue. The bios version changes the dmi string including the svn and pn.
As discussed in https://gitlab.freedesktop.org/libinput/libinput/-/issues/521, it adds a narrower
match that only applies to X240. Other laptops that match `pvrThinkPad??40` are not affected:
$ systemd-hwdb query 'evdev:name:SynPS/2 Synaptics TouchPad:dmi:*svnLENOVO*:pvrThinkPadX240:*'
EVDEV_ABS_00=1232:5711:51
EVDEV_ABS_01=1159:4700:53
EVDEV_ABS_35=1232:5711:51
EVDEV_ABS_36=1159:4700:53
$ systemd-hwdb query 'evdev:name:SynPS/2 Synaptics TouchPad:dmi:*svnLENOVO*:pvrThinkPadX140:*'
EVDEV_ABS_00=::41
EVDEV_ABS_01=::37
EVDEV_ABS_35=::41
EVDEV_ABS_36=::37
This is all confusing as hell, becuase in some places lowercase hexadecimal
digits are used, and in other places uppercase. This adds a check for the
most common case that we and others got wrong.
I tried to extend the general grammar in hwdb_grammar() to include this check,
but it quickly became very complicated and didn't seem to work properly. Doing
initial parsing with more general rules is easier and also seems to give better
error messages:
/home/zbyszek/src/systemd-work/build/../hwdb.d/60-autosuspend.hwdb: 3 match groups, 5 matches, 3 properties
Pattern 'v058fp9540*' is invalid: Expected W:(0123...), found 'f' (at char 4), (line:1, col:5)
This effectively partially reverts "rules: remove all power management from
udev" / e2452eef02. The rules for emulated QEMU
hardware were removed in one fell swoop with other rules which were causing
problems. But the qemu rules were working properly (and were adjusted through
patches over time). Nowadays we have a hwdb for this, so add hwdb entries using
the new detailed modalias.
https://github.com/systemd/systemd/pull/353#issuecomment-658810289
This commit enables the microphone mute button and the screen rotate button, even if the latter is improperly linked. I have documented how to achieve this in https://wiki.archlinux.org/index.php/MSI_P15#Fn_Keys .
There seems to be a newer version of Logitech M705 mouse in the wild.
Let's add it to the hwdb.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
HP spec mandates the hp-wireless driver as canonical source of rfkill
event, so mask the rfkill event from intel-hid to avoid double rfkill
events fired from a single hotkey press.
This fixes the broken rotation on the Acer Spin 1 I recently bought (exact model is SP111-34N-P4BZ).
It is possible that all of the SP111 models would use the same matrix, but to be on the safe side, I added a new entry.
This has now been deprecated in libinput, the only known user of this
property. It was never set for any device and weston and mutter, maybe
other compositors, never added the code required to parse it.
The benefit we could get in the UI from handling tilt differently to
wheel is tiny and the lack of support shows that it isn't of interest to
anyone. Let's remove this.
See also
https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/444
