In most cases we refernced the concept as "initrd". Let's convert most
remaining uses of "initramfs" to "initrd" too, to stay internally
consistent.
This leaves "initramfs" only where it's relevant to explain historical
concepts or where "initramfs" is part of the API (i.e. in
/run/initramfs).
Follow-up for: b66a6e1a58
In many places we spelled out the phrase behind "initrd" in full, but this
isn't terribly useful. In fact, no "RAM disk" is used, so emphasizing this
is just confusing to the reader. Let's just say "initrd" everywhere, people
understand what this refers to, and that it's in fact an initramfs image.
Also, s/i.e./e.g./ where appropriate.
Also, don't say "in RAM", when in fact it's virtual memory, whose pages
may or may not be loaded in page frames in RAM, and we have no control over
this.
Also, add <filename></filename> and other minor cleanups.
docbook already indents diagrams, so there is no need to leave whitespace on
the left. Also, make the charts a bit narrower to fit better on a terminal.
This adds the support for veritytab.
The veritytab file contains at most five fields, the first four are
mandatory, the last one is optional:
- The first field contains the name of the resulting verity volume; its
block device is set up /dev/mapper/</filename>.
- The second field contains a path to the underlying block data device,
or a specification of a block device via UUID= followed by the UUID.
- The third field contains a path to the underlying block hash device,
or a specification of a block device via UUID= followed by the UUID.
- The fourth field is the roothash in hexadecimal.
- The fifth field, if present, is a comma-delimited list of options.
The following options are recognized only: ignore-corruption,
restart-on-corruption, panic-on-corruption, ignore-zero-blocks,
check-at-most-once and root-hash-signature. The others options will
be implemented later.
Also, this adds support for the new kernel verity command line boolean
option "veritytab" which enables the read for veritytab, and the new
environment variable SYSTEMD_VERITYTAB which sets the path to the file
veritytab to read.
This reverts commit 362c378291.
This commit introduced an ordering loop: remote-cryptsetup.target was both
before and after remote-fs-pre.target. It also globally ordered all cryptsetup
volumes before all mounts. Such global ordering is problematic if people have
stacked storage. Let's look for a different solution.
See https://github.com/systemd/systemd/pull/14378#discussion_r359460109.
When systemd is started, it detects initrd by checking for that file
The usage of that file is not documented anywhere, so mention it early
in the most relevant man-page I could find.
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
No need to waste space, and uniformity is good.
$ perl -i -0pe 's|\n+<!--\s*SPDX-License-Identifier: LGPL-2.1..\s*-->|\n<!-- SPDX-License-Identifier: LGPL-2.1+ -->|gms' man/*.xml
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
When trying to read keyfiles from an encrypted partition to unlock the swap,
a cyclic dependency is generated because systemd can not mount the
filesystem before it has checked if there is a swap to resume from.
Closes#3940
Add a synchronization point so that custom initramfs units can run
after the root device becomes available, before it is fsck'd and
mounted.
This is useful for custom initramfs units that may modify the
root disk partition table, where the root device is not known in
advance (it's dynamically selected by the generators).
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
It is annoying when we have dead links on fd.o.
Add project='man-pages|die-net|archlinux' to <citerefentry>-ies.
In generated html, add external links to
http://man7.org/linux/man-pages/man, http://linux.die.net/man/,
https://www.archlinux.org/.
By default, pages in sections 2 and 4 go to man7, since Michael
Kerrisk is the autorative source on kernel related stuff.
The rest of links goes to linux.die.net, because they have the
manpages.
Except for the pacman stuff, since it seems to be only available from
archlinux.org.
Poor gummiboot gets no link, because gummitboot(8) ain't to be found
on the net. According to common wisdom, that would mean that it does
not exist. But I have seen Kay using it, so I know it does, and
deserves to be found. Can somebody be nice and put it up somewhere?
First, rename root-fs.target to initrd-root-fs.target to clarify its usage.
Mount units with "x-initrd-rootfs.mount" are now ordered before
initrd-root-fs.target. As we sometimes construct /sysroot mounts in
/etc/fstab in the initrd, we want these to be mounted before the
initrd-root-fs.target is active.
initrd.target can be the default target in the initrd.
(normal startup)
:
:
v
basic.target
|
______________________/|
/ |
| sysroot.mount
| |
| v
| initrd-root-fs.target
| |
| v
| initrd-parse-etc.service
(custom initrd services) |
| v
| (sysroot-usr.mount and
| various mounts marked
| with fstab option
| x-initrd.mount)
| |
| v
| initrd-fs.target
| |
\______________________ |
\|
v
initrd.target
|
v
initrd-cleanup.service
isolates to
initrd-switch-root.target
|
v
______________________/|
/ |
| initrd-udevadm-cleanup-db.service
| |
(custom initrd services) |
| |
\______________________ |
\|
v
initrd-switch-root.target
|
v
initrd-switch-root.service
|
v
switch-root
