Kernels >= 5.8 have added new fields to the dmi/id/modalias file in the
middle of the modalias (instead of adding them at the end).
Specifically new ":br<value>:" and (optional) ":efr<value>:" fields have
been added between the ":bd<value>:" and ":svn<value>:" fields.
Note the 5.13.0 and 5.14.0 kernels also added a new ":sku<value>:" field
between the ":pvr<value>:" and ":rvn<value>:" fields, this has been fixed
in later 5.13.y and 5.14.y releases, by moving the sku field to the end:
https://lore.kernel.org/lkml/20210831130508.14511-1-hdegoede@redhat.com/
Unfortunately the same cannot be done for the new br and efr fields since
those have been added more then a year ago and hwdb even already has some
newer entries relying on the new br field being there (and thus not working
with older kernels).
Fix the issue with the br and efr fields through the following changes:
1. Replace any matches on ":br<value>" from newer entries with an '*'
2. Replace "bd<value>:svn<value>" matches with: "bd<value>:*svn<value>"
inserting an '*' where newer kernels will have the new br + efr fields
This makes these matches working with old as well as new kernels.
Link: https://github.com/systemd/systemd/issues/20550
Link: https://github.com/systemd/systemd/pull/20562
The USB persist feature allows devices that can retain their state when
powered down to work across suspend/resume. This is in particular useful
for USB drives.
However, the persist feature can get in the way for devices that are
unable to retain their state when power is lost. An example of such
stateful devices are fingerprint readers where USB persist should be
disabled to ensure userspace can detect whether the USB device had a
power loss during system suspend.
This will initially be used by the libfprint autosuspend hwdb.
Closes: #20754
This is a related commit to the bug reported in Ubuntu:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1938259
This adds additional 4 models that without this param, the screen rotates
when the clamshell laptop rotates, which is an unwanted behavior.
This commit also merges entries that needs the same param.
Signed-off-by: Yao Wei (魏銘廷) <yao.wei@canonical.com>
Procotol analyzers are external devices used to capture traffic over a
wire so that it could be analysed. End-users at the console should be
able to access those devices without requiring root access.
This change obsoletes the need to install Total Phase's "Linux drivers",
which are really just udev rules and hotplug usermap files to do that:
https://www.totalphase.com/products/usb-drivers-linux/
This commit was done to add sensor rule for Hometech Wi101. Note that this rule might be too general and need fixes. I couldn't test this on any other device since this one is the only one I have.
Co-authored-by: Simeonlps <Simeonlps@users.noreply.github.com>
Signed-off-by: Wind/owZ <windowz414@gnuweeb.org>
Turns out HP is phasing out hp-wireless in new models, so we need to use
intel-hid for rfkill events.
To have best backward and forward compatibility, the solution is
implemented in userspace:
f4dbcf3d7b
The configuration ROM of Acoustic Reality eAR Master One, Eroica, Figaro,
and Ciaccona has OUI for TerraTec Electronic GmbH in its vendor ID field.
As a result, modalias for the unit is the same as Terratec Electronic
Aureon 7.1 FireWire.
Linux FireWire subsystem adds the same modalias for units of the models.
ALSA bebob driver had duplicated entries for them and was changed at
Linux kernel v5.14 to remove the duplicated entries.
It's better to improve corresponding entries in systemd hwdb, while
it's impossible to distinguish the models by modalias and force to use
the same entry for them. As last resort, this commit selects more
popular model, Aureon 7.1 FireWire for ID_VENDOR_FROM_DATABASE and
ID_MODEL_FROM_DATABASE.
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a07ebc7e050ccdfec508449b2ef8f2b2aa90927b
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
I had misunderstanding that BridgeCo ASIC would be used for extension
option for Mackie d.2 and OXFW971 would be used for Mackie d.2 Pro like
Mackie d.4 Pro. However, it's clear that the latter is model with
pre-installed option.
This commit fixes commit to entry for Mackie d.2. I note that the modalias
of unit of Mackie d.4 Pro is still unidentified.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Some Mackie Onyx-i models are known to have two revisions at least, which
use different ASICS; Oxford Semiconductor FW971 and TC Applied
Technologies TCD2210. I misunderstand that Onyx 1640i had not such
revisions.
This commit fixes comment to entry for the model.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Some of Phonic Firefly series and Helix Board series have the same
combination of vendor ID, model ID, specifier ID, and software
version in their configuration ROM. On the other hand, the other models
have unique combination.
ALSA bebob driver in Linux kernel v5.14 was changed in its modalias table
for the models.
This commit fixes systemd hwdb for the models.
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1586d461f641b60040438275e14c7dbcec5907d6
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This graphic chip doesn't have a DRM driver and fall back to vesa-framebuffer
driver.
Without this patch, users of such chip suddenly see their GUI broken without
any indication or reason of what happened (no error message). Hence this
regression is near to impossible to troubleshoot for end users. Such case was
reported https://bugzilla.opensuse.org/show_bug.cgi?id=1187154.
Rather than adding another exception in the udev rules to deal with such
HWs, they instead get their own hwdb file '60-seat.hwdb'.
The Pinebook Pro touchpad returns a resolution data that is 2 times of
the real value, which makes libinput think the touchpad is only 1/4 the
real size.
Add a resolution override value for it, to allow libinput to calculate
the distance moved on it correctly.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Recently the kernel has gotten support for reading the mount-matrix for
BMA250 sensors represented by a BOSC0200 ACPI device from the ACPI tables,
so that we don't need to add quirks for these.
At least that was the theory. The Chuwi Hi13 (CWI534) with BMA250 sensor
has the sensor mounted such that it works / needs the normal(ized) matrix,
but the ACPI tables actually contain a wrong matrix inverting the X and Y
axis.
Add a quirk to override /sys/bus/iio/devices/iio:device?/in_mount_matrix
with the norm-matrix, since the ACPI derived matrix is actually wrong on
these devices (sigh)
Altough the Logitech website states "1000 DPI", the default DPI
settings seems to be 800 as shown by older versions of Logitech
SetPoint and verification by mouse-dpi-tool.
The old settings were all over the place contained mixed refresh rates.
The new settings are the correct default DPI settings as advertised online.
This has also been confirmed in the latest Logitech Gaming Software (9.02.65).
The atkbd device on the Lenovo Yoga 300-11IBR 2-in-1 sends unknown
keycodes when the touchpad is toggled on/off:
[ 1918.995562] atkbd serio0: Unknown key pressed (translated set 2, code 0x63 on isa0060/serio0).
[ 1918.995610] atkbd serio0: Use 'setkeycodes 63 <keycode>' to make it known.
[ 1919.032121] atkbd serio0: Unknown key released (translated set 2, code 0x63 on isa0060/serio0).
[ 1919.032135] atkbd serio0: Use 'setkeycodes 63 <keycode>' to make it known.
[ 1926.098414] atkbd serio0: Unknown key pressed (translated set 2, code 0x62 on isa0060/serio0).
[ 1926.098461] atkbd serio0: Use 'setkeycodes 62 <keycode>' to make it known.
[ 1926.146537] atkbd serio0: Unknown key released (translated set 2, code 0x62 on isa0060/serio0).
[ 1926.146583] atkbd serio0: Use 'setkeycodes 62 <keycode>' to make it known.
The "Ideapad extra buttons" driver alreadys sends f22 / f23 key-events
when the touchpad is toggles off, so map the keycodes for the duplicate
atkbd events to unknown to silence these kernel warnings.
Old meson fails with:
Element not a string: [<Holder: <ExternalProgram 'sh' -> ['/bin/sh']>>, '-c', 'test -n "$DESTDIR" || /bin/journalctl --update-catalog']
I'm doing it as a revert so that it's easy to undo the revert when we require
newer meson. The effect is not so bad, maybe a dozen or so lines about finding
'sh'.
Meson 0.58 has gotten quite bad with emitting a message every time
a quoted command is used:
Program /home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh found: YES (/home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program xsltproc found: YES (/usr/bin/xsltproc)
Configuring custom-entities.ent using configuration
Message: Skipping bootctl.1 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping journal-remote.conf.5 because HAVE_MICROHTTPD is false
Message: Skipping journal-upload.conf.5 because HAVE_MICROHTTPD is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping loader.conf.5 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
...
Let's suffer one message only for each command. Hopefully we can silence
even this when https://github.com/mesonbuild/meson/issues/8642 is
resolved.
- Internet specifications give 1600 DPI @ 1000Hz for this sensor
- Confirmed experimentally via `mouse-dpi-tool`
- vid, pid, and name match string from `mouse-dpi-tool`
I have also seen that VIOS LTH17 has the exact same correction and it's also a SIPODEV composite hid device also through usb. In the D330 is a detachable keyboard. It's possible that a very generic way to apply this to at least affected sipodev keyboard could be found using the device ids, but needs info to do that and ensure all sipodev keyboard with the pertinent ids need it.
Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
We use pvr match for efifb pitch and drm orientation quirk and in touchpad toggle keymap. Also seems most consistent with the devices here.
While at it, correct a typo, 81H3 and 81MD are product names not numbers, my bad.
Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
D330-10IGM has been added due the fact that 81H3 and 81MD product name belongs to the same product version. So the fact is that now that we know 81MD has the same transformation matrix that the 81H3 we can just use the product version and get rid the product name.
Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
In IEC 61883-1:1998, we can see some values for AV/C device with vendor
unique command set in IEC 61883-1:1998. Current udev rule handles it
for video. However it brings an issue that the functions in AV/C device
are not distinguished just by the content of configuration ROM.
In former commit, hardware database was added to describe function type
of unit in the node, then udev rules are added to utilize the database.
However, we have an request to obsolete existent udev rules by putting
enough entries to the database. It should be done carefully.
This commit adds entry into hardware database just for backward
compatibility. The entry can match to some node and unit unexpectedly.
Therefore this commit modifies existent entries to invalidate the effect
from added entry.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Typical node of AV/C device has standard content of configuration ROM.
This is defined in documentation of 1394 Trading Association.
* Configuration ROM for AV/C Devices 1.0 (Dec. 12, 2000, 1394 Trading
Association, TA Document 1999027)
However, it brings an issue that the functions in AV/C device are not
distinguished just by the content of configuration ROM.
In former commit, hardware database was added to describe function type
of unit in the node, then udev rules are added to utilize the database.
However, we have an request to obsolete existent udev rules by putting
enough entries to the database. It should be done carefully.
This commit adds entry into hardware database just for backward
compatibility. The entry can match to some node and unit unexpectedly.
Therefore this commit modifies existent entries to invalidate the effect
from added entry.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
IIDC specification describes configuration ROM without model field, thus
it's not possible to match any entry with vendor ID and model ID.
Current entry for Cool Stream iSweet can match any node and unit of
IIDC.
This commit removes the entry. I note that this model uses Texus
Instruments MC680-DCC as all-in-one chipset for video function in
IEEE 1394 bus.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Point Grey Research, inc. shipped cameras to support IIDC, however some
of them are necessarily compliant to IIDC specification in terms of the
value of software version field in unit directory of configuration ROM.
This commit adds entries for them.
Reviewed-by: Damien Douxchamps <damien@douxchamps.net>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Instrumentation & Industrial Digital Camera (IIDC) specifications are
defined by 1394 Trading Association for camera device in IEEE 1394 bus.
IIDC2 specifications are defined by joint working group between Japan
Industrial Imaging Association (JIIA) and 1394 Trade Association as
bus-independent specification.
This commit adds entries for the specifications to remove existent udev
rules. Supported specifications are listed below:
* 1394-based Digital Camera Specification Version 1.04 (Aug. 9, 1996,
1394 Trading Association)
* 1394-based Digital Camera Specification Version 1.20 (Jul. 23, 1998,
1394 Trading Association)
* IIDC Digital Camera Control Specification Ver.1.30 (Jul. 25, 2000,
1394 Trading Association)
* IIDC Digital Camera Control Specification Ver.1.31 (Feb. 2, 2004,
1394 Trading Association, TA Document 2003017)
* IIDC Digital Camera Control Specification Ver.1.32 (Jul. 24, 2008,
1394 Trading Association, Document number 2007009)
* IIDC2 Digital Camera Control Specification Ver.1.0.0 (Jan 26th, 2012,
1394 Trading Association, TS2011001)
* IIDC2 Digital Camera Control Specification Ver.1.1.0 (May 19th, 2015,
1394 Trading Association, TS2015001)
Reviewed-by: Damien Douxchamps <damien@douxchamps.net>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Linux kernel has firedtv kernel module as driver for Digital Everywhere
FloppyDTV and FireDTV. Although this driver works without any help of
userspace application, it's better to add entries to hardware database
for developer's convenience.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Zbigniew Jędrzejewski-Szmek points that current entries are against the
convention of indentation. It should be indented by one space instead of
two.
This commit fixes current entries according to it.
Reported-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Fixes: 1b6d9a05b1 ("hwdb: add database entries for models with ASICs in BeBoB solution")
Fixes: 0db0564e95 ("hwdb: add database entries for models with Fireworks board module")
Fixes: 38338b302c ("hwdb: add database entries for models with OXFW970/971 ASICs")
Fixes: c0d8b61f93 ("hwdb: add database entries for models based on DICE ASICs with TCAT specification")
Fixes: a774b5099b ("hwdb: add database entries for models based on DICE ASICs specialized to M-Audio")
Fixes: ff1cb7b939 ("hwdb: add database entries for models based on DICE ASICs specialized to Weiss Engineering")
Fixes: 6f44dddbe2 ("hwdb: add database entries for models based on DICE ASICs specialized by Loud Technologies")
Fixes: 49ed0aad52 ("hwdb: add database entries for models based on DICE ASICs specialized by Harman Music Group")
Fixes: effbb4024b ("hwdb: add database entries for models based on DICE ASICs specialized by Solid State Logic")
Fixes: 4aaa093b5f ("hwdb: add database entries for models of Digidesign Digi 00x family")
Fixes: c489e7f9d3 ("hwdb: add database entries for Tascam FireWire series")
Fixes: 650b8967a5 ("hwdb: add database entries for MOTU FireWire series")
Fixes: 51e9242b9b ("hwdb: add database entries for RME Fireface series")
Fixes: a90a6a9ae9 ("hwdb: add database entries for Yamaha mLAN 2nd generation")
Fixes: 41f2d0d393 ("hwdb: add database entries for Yamaha mLAN 3rd generation")
Fixes: 1d2ee96292 ("hwdb: add database entries for Focusrite Liquid Mix series")
Fixes: 0c20543835 ("hwdb: add database entries for TC Electronic PowerCore FireWire series")
Fixes: 8b4b76dc50 ("hwdb: add database entry for node with single unit with video function")
Fixes: 12dd2404be ("hwdb: add database entries for node with multiple units")
Fixes: dece0357e1 ("hwdb: add database entries for node with single unit for multiple functions")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
When given no arguments, hwdb parser script seeks test target files by
glob pattern. Although I added a new file for IEEE 1394 unit functions,
the file is excluded as test target due to the pattern.
This commit fixes it.
Fixes: 7713f3fc6a ("hwdb: add parser grammar for IEEE 1394 unit function list")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This patch fix scancode 0x120001 mapping to key code F20 micmute
The previous scancode is not correct, it will cause the micmute
hotkey no function when testing the mic mute
Add the Sierra Wireless EM7345-LTE modem to the list of USB devices which
can safely autosuspend. This helps the processor reach deaper PC# states
when idle.
This was tested on a ThinkPad8 tablet with such a modem builtin.
Avid Adrenarine and Mojo has configuration ROM in which single unit exists
in root directory, however the unit has both video and audio functions.
For the case, it's better to distinguish from the case of composite node.
This commit adds database entries for them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In IEEE 1394 bus, one node can include multiple units, which represent
certain functions such as video and audio. Although it's possible to
distinguish each unit, Linux FireWire character device corresponding to
the node can not have multiple group owners, therefore it's forced to
select one of the units as representative for function.
This commit adds database entries for units belongs to the same node.
The entries are aligned to inverse order of corresponding unit order
in configuration ROM to select the first unit as the representative.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cool Stream shipped iSweet. This model has single unit for video function.
This commit adds database entry for it as sample of node with single unit
for video.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TC Electronic had PowerCore platform for products of digital audio signal
processing. This platform consists of NXP PowerQUICC II Processor with PCI
interface (XPC8245, MPC8245), Xilinx Spartan-II FPGA (XC2S50), and some
NXP 24-Bit Audio Digital Signal Processor (DSP56367). The products for
IEEE 1394 bus has additional TI OHCI 1.1, 1394a link layer controller
(TSB43AB23).
The content of configuration ROM has layout of standard of 1394 Trading
Association.
This commit adds database entries for the models. At present, no driver is
developed, thus this is just for convenience to developers.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Sintefex Audio Lda. designed Liquid Mix as OEM of Focusrite Audio
Engineering, Ltd. The models serve digital signal processing service via
asynchronous transaction in IEEE 1394 bus.
The content of configuration ROM is not standard of 1394 Trading
Association.
This commit adds an rule entry for the models. At present, no driver is
developed, thus this is just for convenience to developers.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TC Applied Technologies designed DiceII ASIC to adapt to two protocols.
One of the protocol is mLAN defined by Yamaha Corporation, and another
is own protocol. The DiceII ASIC adapted to mLAN protocol was used some
products by Yamaha and its child company, Steinberg.
The content of configuration ROM for the models has completely different
layout from the one defined by 1394 Trading Association.
This commit adds an udev rule for the models. At present, no driver is
developed, thus this is just for convenience to developers.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Yamaha Corporation designed mLAN protocol based on IEEE 1394
specification. Yamaha developed specific ICs for the purpose (mLAN-NC1
and mLAN-PH2), and shipped some products with them, as well as OEM.
The content of configuration ROM is completely different from standard
layout defined by 1394 Trading Association.
This commit adds database entries for the models. At present, two vendors
are known for models with mLAN IC. At present, no driver is developed
for the models, thus this is just for convenience to developers.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
RME GmbH shipped Fireface series. The configuration ROM in the models of
series has some quirks and against standard of 1394 Trading Association.
This commit adds database entries for the models. ALSA fireface driver
supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Mark of the unicorn (MOTU) shipped FireWire series. The configuration ROM
in the models of series has some quirks and against standard of 1394
Trading Association.
This commit adds database entries for the models. ALSA firewire-motu driver
supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TEAC Corporation shipped FireWire series in its TASCAM brand. The
configuration ROM in the models of series has some quirks and against
standard of 1394 Trading Association.
This commit adds database entries for the models. ALSA firewire-tascam
driver supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Avid Audio shipped Digi 00x family in its Digidesign brand. The
configuration ROM in the models of family has some quirks and against
standard of 1394 Trading Association.
This commit adds database entries for the model. ALSA firewire-digi00x
driver supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Solid State Logic, Ltd. shipped some models based on DICE ASICs. The
content of configuration ROM has a quirk that the value of category
field is unique (0x51 or 0x52).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Harman International Industries, Inc. shipped some models based on DICE
ASICs in its Lexicon brand. The content of configuration ROM has a quirk
that the value of category field is unique (0x20).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
LOUD Audio, LLC (formerly known as LOUD Technologies, Inc.) shipped some
models based on DICE ASICs in its Mackie brand. The content of
configuration ROM has a quirk that the value of category field is unique
(0x10).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Weiss Engineering Ltd. shipped some models based on DICE ASICs. The
content of configuration ROM has a quirk that the value of category
field is unique (0x00).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
M-Audio shipped some models based on DICE ASICs. The content of
configuration ROM has a quirk that the value of version field in unit
directory is different from the one in TCAT specification (0x000001).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TC Applied Technologies designed the series of ASIC for audio and music
data transmission in several types of communication bus. It's named as
Digital Interface Communication Engine (DICE). Four ASICs are known in
the series for IEEE 1394 bus; Dice II, TCD2210 (Dice Jr.), TCD2220 (Dice
Mini), and TCD3070 (DiceIII).
The content of configuration ROM in products based on DICE ASICs is
known against specification defined by 1394 Trading Association.
This commit adds database entries for models without any customization by
vendors. In TCAT specification, The value of GUID field is split to four
parts; 24-bit OUI, 8-bit category, 10-bit product ID, and 22-bit serial
number in the order. In the specification, the value of category field is
fixed to 0x04. The root directory includes leaf entries for vendor and
model names. Although the specifier_id field in unit directory differs
depending on vendors, the version field in unit directory is fixed to
0x000001. ALSA dice driver supports them, but expects userspace
application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Once Oxford Semiconductor designed FW970 and FW971 ASICs as Multi-Channel
Isochronous Streaming FireWire Audio Controller. Some vendors used them
in their products for audio and music units.
The content of configuration ROM has standard layout of 1394 Trading
Association with an additional Dependent Information directory.
This commit adds database entries for the known models. ALSA oxfw
driver supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Echo Audio Corporation designed Fireworks board module. The module is used
by several vendors for models.
The content of configuration ROM in the models s some quirks and against
standard of 1394 Trading Association.
This commit adds database entries for the model. ALSA fireworks driver
supports them but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
ArchWave AG, formerly known as BridgeCo. AG, designed DM1000, DM1100, and
DM1500 ASICs for BridgeCo. Enhancement BreakOut Box (BeBoB) solution.
They were used for many models shipped by many vendors.
The content of configuration ROM has standard layout of 1394 Trading
Association with an additional Dependent Information directory.
This commit adds database entries for the known models. ALSA bebob
driver supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Although in IEEE 1394 unit function list I have a plan to use slash sign
in name of property, current implementation of parser doesn't allow it.
When parsing current entries in database excluded from parser testing, we
can find usage of slash sign in name of property.
This commit adds slash sign in allow list of the parser for my
convenience.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In added IEEE 1394 unit function list, I use custom key to detect unit
entries in node context. Although the list is not widely used in the most
of systemd users, I would like to add parser grammar for testing, by
borrowing a bit time in builders.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Current udev rules configures group owner of firewire character device
to video group, corresponding to nodes in IEEE 1394 in below cases:
1.the node with any unit for any minor version of IIDC version 1
specification defined by 1394 Trading Association
2.the node with any unit for specification defined by Point Grey Research
3.the node with any unit for AV/C device v1.0 defined by 1394 Trading
Association
4.the node with any unit for vendor-unique protocol defined by 1394
Trading Association
Nevertheless, case 3 and 4 can cover the node with any unit for audio
function as well. In the cases, it's convenient to assign audio group.
Additionally, some nodes are known to have layout different from
the specification defined by 1394 Trading Association. In the case,
it's required to add rules specific to them.
Furthermore, some nodes have no fields for vendor name and model name in
configuration ROM. In the case, it's required to add entries to hardware
database for users convenience.
For the above reasons, this commit adds rules to use information in
hardware database for known units in IEEE 1394. One database entry
corresponds to one unit. Two types of key are used to match the unit;
customized key from node context, kernel modalias of unit context.
The entry has the type of function, at least. Supplementally, it has
vendor and model names.
For your information, below statements with Python pyparsing module are
expected to parse all of the custom key and module alias in the list:
```
subsystem_prefix = pp.Literal('ieee1394:').suppress()
hex_to_int = lambda a: int(a[0], 16)
node_prefix = pp.Literal('node:').suppress()
prefixed_lower_hex = pp.Combine(pp.Literal('0x') + pp.Word(pp.srange('[a-z0-9]'), exact=6)).setParseAction(hex_to_int)
ven_in_node = pp.dictOf(pp.Literal('ven'), prefixed_lower_hex)
mo_in_node = pp.dictOf(pp.Literal('mo'), prefixed_lower_hex)
unit_in_node = pp.Group(prefixed_lower_hex + pp.Literal(':').suppress() + prefixed_lower_hex)
units_in_node = pp.Group(pp.Literal('units') + pp.ZeroOrMore(pp.Literal('*')).suppress() + unit_in_node + pp.ZeroOrMore(pp.Literal('*')).suppress())
node_parser = subsystem_prefix + node_prefix + ven_in_node + pp.Optional(mo_in_node) + units_in_node
higher_hex = pp.Word(pp.srange('[A-Z0-9]'), exact=8).setParseAction(hex_to_int)
ven_in_unit = pp.dictOf(pp.Literal('ven'), higher_hex)
mo_literal_in_unit = pp.dictOf(pp.Literal('mo'), higher_hex)
mo_in_unit = pp.dictOf(pp.Literal('mo'), higher_hex ^ pp.Literal('*'))
sp_in_unit = pp.dictOf(pp.Literal('sp'), higher_hex)
ver_in_unit = pp.dictOf(pp.Literal('ver'), higher_hex)
unit_parser = subsystem_prefix + ven_in_unit + mo_in_unit + sp_in_unit + ver_in_unit
key_parser = node_parser ^ unit_parser
```
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Dell new Privacy feature provide new hardware level privacy
protect for users
This patch remaps scancode 0x120001 to key code F20 micmute
The old matching string cannot cover some other Dell products
which have the privacy feature,expand the string to all the system
that can load the privacy driver,privacy driver already detect the
system if it can support this feature. So here we can safely just
map the micmute key to scancode 0x120001
Signed-off-by: Perry Yuan <perry_yuan@dell.com>
The additional rules fix a firmware bug in the en keyboard of Librem notebooks by Purism.
By doing so the break the keyboard with other layouts which do not have the same bug in their firmware.
The device is very similar to MACH-WX9 in many ways, including this
particular one. Adding these rules gets rid of evdev warnings as buttons
are being pressed on this device.
As documented at the top of the file we require the normal property if we have
the horizontal property, and we require the CLICK_ANGLE property if the
CLICK_COUNT property is present. Codify this into the hwdb parser so we can
pick up on it.
The script is renamed to match.
Now all targets are named uniformly in a tab-completion-friendly fashion, with
the exception of systemd-update-po which is generated by the i18n module
automatically:
$ ninja -C build -t targets | grep update
systemd-update-po: phony
update-syscall-tables: phony
update-syscall-header: phony
update-hwdb: phony
update-hwdb-autosuspend: phony
update-dbus-docs: CUSTOM_COMMAND
update-man-rules: CUSTOM_COMMAND
It is only the Samsung 900X3A which has the alternative function keys.
The 900X3B, 900X4B have the standard Series 9 layout - as defined above.
Note: the 900X4A is not a valid laptop model.
libfprint includes a list of known fingerprint readers that can be
autosuspended. Upstream libfprint generates this file from the USB IDs
registered to drivers and a list of well-known readers that are
currently unsupported.
Closes: #17663
Added Cube Mix Plus (i18B) Rotation information.
Also Combined the sensor lines with the different Cube i7 stylus models because they use the same ACCEL_MOUNT_MATRIX
This fixes the following warning:
```
parse_hwdb.py:120: UserWarning: warn_ungrouped_named_tokens_in_collection: setting results name 'SETTINGS*' on And expression collides with 'HZ' on contained expression
dpi_setting = (Optional('*')('DEFAULT') + INTEGER('DPI') + Suppress('@') + INTEGER('HZ'))('SETTINGS*')
```
Not sure about for the mount_matrix, but LGTM.com warns in that line,
and, adding Group() does not change the parse result.
Only some small changes, because we updated recently. As usual, it seems that there are mostly
additions with a smaller amount of corrections, no big removals.
The Lenovo ThinkPad Yoga 11e 360 degree hinges style 2-in-1s use 2
accelerometers, 1 in the display and 1 in the base.
Kernel work is under way to also export the second accelerometer in
the base as an iio-device; and userspace work is underway to use
both accelerometers on 360 degree hinges style 2-in-1s (with 2 accels)
to figure out the angle between the 2 halves.
So far most orientation-matrix quirks have not cared much about the
Z-axis being correct, but in these 2 accelerometer setups getting
the Z-axis correct is important too.
The KIOX010A and KIOX02A ACPI hw-ids (HIDs) are used in 360 degree hinges
style 2-in-1s which have 2 accelerometers, 1 in the display (as usual) and
a second accelerometer in the base.
So far 60-sensor.hwdb has only defined a mount-matrix for the
sensor with the KIOX010A HID, which is the sensor in the display
half of the device. The reason for this is that sofar userspace has
only cared actually used the sensor in the display (for automatic
display rotation. Work is underway to make userspace use both sensors:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Recently an entry was added for the Medion Akoya's E2221T base-sensor,
but that was added to mark it with ACCEL_LOCATION=base and the entry
simply used the identity-matrix for ACCEL_MOUNT_MATRIX since nothing
is using the mount-matrix info for the second accelerometer.
I believe that this entry was added because on some devices the second
accelerometer gets enumerated first and then iio-sensor-proxy will
wrongly use the second sensor for display-rotation, unless it is marked
with ACCEL_LOCATION=base.
Instead of adding info for the second accelerometer on a per device
basis use the same generic dmi matches as used for the first (KIOX010A)
sensor, replacing the special case added for the E2221T and also
update the ACCEL_MOUNT_MATRIX with the actual mount-matrix for the
KIOX020A sensor in the base of these devices.
This was tested on a Medion Akoya E2228T.
Document how the mount-matrix for the base-accelerometer must be set on
360 degree hinges style 2-in-1s with 2 sensors (one in the display and
1 in the base).
Note the choice to define the lid being fully closed as an angle of
0 degrees is based on the ACPI tables of devices with a BOSC0200
ACPI device-node describing both sensors. In this case the ACPI
tables contain mount-matrix info (and the kernel will soon support
reading this and exporting it to userspace) and the mount-matrices
defined in these ACPI tables are such that the angle of the G-force
vector measured by the sensors is identical for both sensors when
the laptop's lid is fully closed.
This also feels more natural then defining the laptop being fully
open (180 degrees open) as the home / 0 degree angle position.
2 updates to the Logitech MX5000 key mappings:
1. Fix Logitech MX5000 Media key mapping:
The MX5000 has a key clearly marked "media" (in text) and when they gets
pressed the keyboards LCD briefly shows "MEDIA" in a big font.
Yet the keyboard sends a HID usage code which according to the HUTT
is config/control-panel. Map this to media so that the key behaves as
labeled.
2. Add mapping for the scan-code send by the Fn on/off toggle key
The Logitech Dinovo Edge has 5 special hotkeys, one with a phone symbol
and the 4 usual Logitech A-D smartkeys. These send custom Logitech
0xc10xx keycodes, add mappings for these.
Some Logitech wireless keyboards report when there Fn key is pressed,
add a mapping for this.
While it also fix identiation of 2 adjescent key-maps to use tabs like the
other Logitech entries
Dell new Privacy feature provide new hardware level privacy
protect for users,it needs to map the scan code to F20 micmute
Signed-off-by: Perry Yuan <perry_yuan@dell.com>
This is useful for development where overwriting files out side
the configured prefix will affect the host as well as stateless
systems such as NixOS that don't let packages install to /etc but handle
configuration on their own.
Alternative to https://github.com/systemd/systemd/pull/17501
tested with:
$ mkdir inst build && cd build
$ meson \
-Dcreate-log-dirs=false \
-Dsysvrcnd-path=$(realpath ../inst)/etc/rc.d \
-Dsysvinit-path=$(realpath ../inst)/etc/init.d \
-Drootprefix=$(realpath ../inst) \
-Dinstall-sysconfdir=false \
--prefix=$(realpath ../inst) ..
$ ninja install
I tested this on my ZBook Studio G5. I'm not sure if this works for other ZBook studio machines.
I have two more notes on this PR:
- some keys send multiple scancodes. I matched only on one of them, because I couldn't figure out how to match
on all of them. This results in the others still being visible:
Event: time 1604520228.146226, -------------- SYN_REPORT ------------
Event: time 1604520228.151533, type 4 (EV_MSC), code 4 (MSC_SCAN), value db
Event: time 1604520228.151533, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 1
Event: time 1604520228.151533, -------------- SYN_REPORT ------------
Event: time 1604520228.259862, type 4 (EV_MSC), code 4 (MSC_SCAN), value 38
Event: time 1604520228.259862, type 1 (EV_KEY), code 56 (KEY_LEFTALT), value 0
Event: time 1604520228.259862, -------------- SYN_REPORT ------------
Event: time 1604520228.259944, type 4 (EV_MSC), code 4 (MSC_SCAN), value 66
Event: time 1604520228.259944, type 1 (EV_KEY), code 218 (KEY_CONNECT), value 0
Event: time 1604520228.259944, -------------- SYN_REPORT ------------
Event: time 1604520228.266513, type 4 (EV_MSC), code 4 (MSC_SCAN), value db
Event: time 1604520228.266513, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 0
Event: time 1604520228.266513, -------------- SYN_REPORT ------------
I wanted to set the display key to switchvideomode, but another key is already set to that, so I set it to displaytoggle instead.
Pinebook Pro's display brightness up & down keys do not work until the
keys are mapped to the corresponding codes.
Also, the sleep key is mapped to KEY_POWER code originally. This quirk
maps the sleep key to the KEY_SLEEP code.
This idea comes from the pinebookpro-post-install package [1] of Manjaro
ARM, which is the preloaded OS on Pinebook Pro.
[1]: 7ab1a134ea
This reverts commit c0443b97b7.
I got various cases wrong:
"usb:v04F3p2B7Cd5912dc00dsc00dp00ic03isc00ip00in00"
"usb:v0627p0001:QEMU USB Tablet"
"input:b0003v0627p0001e0001-e0,1,2,4,k110,111,112,r0,1,8,B,am4,lsfw"
OTOH:
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
is OK. Other parts follow after 'pn'.
-mouse:*:name:*Trackball*:*
-mouse:*:name:*trackball*:*
-mouse:*:name:*TrackBall*:*
+mouse:*:name:*Trackball*:
+mouse:*:name:*trackball*:
+mouse:*:name:*TrackBall*:
... and anything else with :name should be OK too, because our imports always
include ":" at the end:
IMPORT{builtin}="hwdb 'joystick:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'"
Including '*' at the end makes the pattern work even if we decide to add
something to the match string later.
Fixes#17499.
The properties are not unquoted by udev, so the quotes effectively became part
of the value.
Even though those properties were added quite a while ago
(086c001e29,
d7d31692bf), they never started being used
(because of issues with having multiple layouts), see
https://gitlab.gnome.org/GNOME/mutter/-/issues/906,
https://bugzilla.gnome.org/show_bug.cgi?id=775681.
Let's remove the quotes while we still can.
From https://bugzilla.gnome.org/show_bug.cgi?id=775681#c7:
> Note to self: the values for XKB_FIXED_LAYOUT and XKB_FIXED_VARIANT are
> quoted, meaning that we need to remove the quotes before passing the values
> from udev_device_get_property_value() to xkb_keymap_new_from_names()
> otherwise the compilation of the keymap fails (please don't ask how I found
> out...)
No functional change is intended.
The general pattern of changes:
-usb:v04F3p2B7C*
+usb:v04F3p2B7C:*
This is mostly a clarification, to make the part that makes the usb vXXXXpYYYY
part visually separated. It would only make a difference if we added further
keys with a different number of digits, which is unlikely.
-usb:v0627p0001:*QEMU USB Keyboard*
-usb:v0627p0001:*QEMU USB Mouse*
-usb:v0627p0001:*QEMU USB Tablet*
+usb:v0627p0001:*QEMU USB Keyboard*:*
+usb:v0627p0001:*QEMU USB Mouse*:*
+usb:v0627p0001:*QEMU USB Tablet*:*
Again, only a clarification. We know that ":" will appear somewhere later in
the match key, so anything that matches "…Keyboard*" will also match "…Keyboard*:*".
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
This makes the match narrower. Previously we would match product "N53SV"
and "N53SV2", "N53SV3", and others. Here we are saying that the ':pn' part must
match exactly. Most of the changes in this patch match this pattern. I made a few
judgement calls and used "pn…*:*" when I wasn't sure if the full pn is included:
-evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*
+evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*:*
-evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:
+evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:*
This more like the "QEMU" example above, since all dmi strings end in ":", so
anything which matches the old version will also match the new version.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:pvr*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:*
I replaced trailing ":pvr*" by ":*". This makes no functional difference because
we expect "pvr" to always appear in the dmi string. This makes patterns shorter.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*:*
OTOH, ":pn*" is kept. This is because almost patterns include ":pn*", and if we
skip it, we should make it clear that this is on purpose, that we really want to
match any product name.
The python script to generate autosuspend rules is updated to use ":*" too.
Inspired by https://github.com/systemd/systemd/pull/17281#discussion_r501489750.
I'm keeping this part separate because a function change is intended here.
Those patterns didn't match:
$ systemd-hwdb query 'evdev:atkbd:dmi:bvn_:bvr_:bd_:svnLENOVO:pn_:pvrThinkPadT430s'
KEYBOARD_LED_CAPSLOCK=0
$ systemd-hwdb query 'evdev:atkbd:dmi:bvn_:bvr_:bd_:svnLENOVO:pn_:pvrThinkPadT430s:'
(nil)
This commit add calendar and micmute hotkeys for HP EliteBook Folio G1, and also correct name of other laptop from HP EliteBook Folio series - HP EliteBook Folio 1040 G2
1. rfkill hotkey is reported from three source: keyboard, Intel HID and HP Wireless hotkeys. Let's block first two.
2. Correct mapping for calendar, micmute, display and brightness hotkeys.
Different bios version includes different pn. Submitted change fixed my inverted screen after reboot.
I've stepped back to the bios version 5.11 28.04.2016 in an attempt to troubleshoot Windows Hello locking the sign
in on reboot. The screen again rotated, but 90 degrees to the right. I created a new hwdb line to resolve that issue. The bios version changes the dmi string including the svn and pn.
As discussed in https://gitlab.freedesktop.org/libinput/libinput/-/issues/521, it adds a narrower
match that only applies to X240. Other laptops that match `pvrThinkPad??40` are not affected:
$ systemd-hwdb query 'evdev:name:SynPS/2 Synaptics TouchPad:dmi:*svnLENOVO*:pvrThinkPadX240:*'
EVDEV_ABS_00=1232:5711:51
EVDEV_ABS_01=1159:4700:53
EVDEV_ABS_35=1232:5711:51
EVDEV_ABS_36=1159:4700:53
$ systemd-hwdb query 'evdev:name:SynPS/2 Synaptics TouchPad:dmi:*svnLENOVO*:pvrThinkPadX140:*'
EVDEV_ABS_00=::41
EVDEV_ABS_01=::37
EVDEV_ABS_35=::41
EVDEV_ABS_36=::37
This is all confusing as hell, becuase in some places lowercase hexadecimal
digits are used, and in other places uppercase. This adds a check for the
most common case that we and others got wrong.
I tried to extend the general grammar in hwdb_grammar() to include this check,
but it quickly became very complicated and didn't seem to work properly. Doing
initial parsing with more general rules is easier and also seems to give better
error messages:
/home/zbyszek/src/systemd-work/build/../hwdb.d/60-autosuspend.hwdb: 3 match groups, 5 matches, 3 properties
Pattern 'v058fp9540*' is invalid: Expected W:(0123...), found 'f' (at char 4), (line:1, col:5)
This effectively partially reverts "rules: remove all power management from
udev" / e2452eef02. The rules for emulated QEMU
hardware were removed in one fell swoop with other rules which were causing
problems. But the qemu rules were working properly (and were adjusted through
patches over time). Nowadays we have a hwdb for this, so add hwdb entries using
the new detailed modalias.
https://github.com/systemd/systemd/pull/353#issuecomment-658810289
This commit enables the microphone mute button and the screen rotate button, even if the latter is improperly linked. I have documented how to achieve this in https://wiki.archlinux.org/index.php/MSI_P15#Fn_Keys .
There seems to be a newer version of Logitech M705 mouse in the wild.
Let's add it to the hwdb.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
HP spec mandates the hp-wireless driver as canonical source of rfkill
event, so mask the rfkill event from intel-hid to avoid double rfkill
events fired from a single hotkey press.
This fixes the broken rotation on the Acer Spin 1 I recently bought (exact model is SP111-34N-P4BZ).
It is possible that all of the SP111 models would use the same matrix, but to be on the safe side, I added a new entry.
This has now been deprecated in libinput, the only known user of this
property. It was never set for any device and weston and mutter, maybe
other compositors, never added the code required to parse it.
The benefit we could get in the UI from handling tilt differently to
wheel is tiny and the lack of support shows that it isn't of interest to
anyone. Let's remove this.
See also
https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/444
Commit 3d864658ea ("hwdb: assume all Medion Akoya E-models have the
same matrix"), unified the entries for most Medion Akoya E* modes,
including the entry for the Medion Akoya E2215T MD60198.
But the accelerometer on the E2215T has an ACPI-id of KIOX000A, rather
then KIOX010A as the other models have, so that commit broke the
ACCEL_MOUNT_MATRIX for the E2215T.
Add a separate match for the E2215T so that it gets the correct
ACCEL_MOUNT_MATRIX again.
The original source of these dimensions had swapped the x y dimension
arguments to touchpad-edge-detector. The correct dimensions are
x = 100 mm, y = 68 mm
With the default config repeated press of fn+VolumeUp or fn+VolumeDown lead to
repeated presses even after release, which leads to volume going to 100% or 0%.
Unlike newer Medion Akoya E* models for which we have a generic
wildcard match, this model uses a somewhat older KIOX0009 accelerometer.
Not only does our generic catch all not match, we also need a different
matrix for this model, so add a model-specific entry for it.
the modalias reported by udev is acpi:BOSC0200:BOSC0200: but the rules
only matched acpi:BOSC0200:BOSC0200 (without the trailing colon)
change to acpi:BOSC0200* as in other models
This was added in ffac30349e in 2017 but didn't
get added to the meson.build thus never actually installing it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add the resolution and range information for Lenovo Ideapad 310S-14ISK Alps touchpad. It provides information for the test case of libinput for Alps devices.
The Synaptics Touchpad that comes with the T490 doesn't explicitly set
its resolution, so these lines are needed to provide that, in order to
help the libinput code detect overly large jumps. Since this device
contains buttons under the lower section of the touchpad, large jumps
are common, so having the resolution helps libinput greatly reduce
the number of occurances of pointer jump.
This comes from
https://gitlab.freedesktop.org/libinput/libinput/issues/402.
The kernel now has proper evdev codes for the menu buttons below the
small LCD-s builtin to some keyboards.
Add mappings for these buttons on the Logitech MX5000 and MX5500 keyboards.
This commit fix the accelerometer orientation on the Jumper EZpad
Go tablet.
The tablet does not have its product name filled in dmi table, make
the match string a bit generic. Here we assume that the use of a
KIOX000A + bios-vendor + chassis-type combo is unique enough to
match the currently available product in Jumper's x86 tablet series.
For future reference, as in 2019, the tablet has a dmialias of:
dmi:bvnAmericanMegatrendsInc.:bvrZB-BI-11.6-SF133AR200-059-J \
:bd05/21/2019:svnjumper:pnEZpad:pvrTobefilledbyO.E.M.:rvnTob \
efilledbyO.E.M.:rnTobefilledbyO.E.M.:rvrTobefilledbyO.E.M.:c \
vnTobefilledbyO.E.M.:ct31:cvrTobefilledbyO.E.M.:
There is no change in the file right now, but the download seems to work
OK.
It's funny that the biggest company in the world cannot provide a
download link in plain text.
Chromebook keyboards have a top row which generates f1-f10 key codes but
the keys have media symbols printed on them. A simple scan code to key
code mapping to the correct media keys makes the f1-f10 inaccessible. To
properly use the keyboard a custom key code to symbol mapping in xbk is
required (a variant of the chromebook xkb model is already upstream).
Other devices have similar problems.
This commit makes it possible to specify which xkb model should be used
for a specific device by setting XKB_FIXED_MODEL.
pyparsing 2.3.1/2.4.0 had some changes to grouping of And matches, and as a
result we'd report 0 properties and 0 matches, and not really do any checks.
With this change we get identical behaviour for pyparsing 2.3.1, 2.4.0, 2.4.2:
$ hwdb/parse_hwdb.py
hwdb/60-evdev.hwdb: 72 match groups, 94 matches, 262 properties
hwdb/60-input-id.hwdb: 3 match groups, 3 matches, 4 properties
hwdb/60-keyboard.hwdb: 173 match groups, 256 matches, 872 properties
Keycode KBD_LCD_MENU1 unknown
Keycode KBD_LCD_MENU4 unknown
Keycode KBD_LCD_MENU2 unknown
Keycode KBD_LCD_MENU3 unknown
hwdb/60-sensor.hwdb: 101 match groups, 120 matches, 105 properties
hwdb/70-joystick.hwdb: 2 match groups, 3 matches, 2 properties
hwdb/70-mouse.hwdb: 104 match groups, 119 matches, 123 properties
hwdb/70-pointingstick.hwdb: 8 match groups, 30 matches, 11 properties
hwdb/70-touchpad.hwdb: 6 match groups, 9 matches, 6 properties
pyparsing sometimes changes behaviour and stops giving matches. This should
allow us to detect such scenario. With this change, parse_hwdb fails with
pyparsing 2.4 on F31.
