This renames systemd-boot-system-token.service to
systemd-boot-random-seed.service and conditions it less strictly.
Previously, the job of the service was to write a "system token" EFI
variable if it was missing. It called "bootctl --graceful random-seed"
for that. With this change we condition it more liberally: instead of
calling it only when the "system token" EFI variable isn't set, we call
it whenever a boot loader interface compatible boot loader is used. This
means, previously it was invoked on the first boot only: now it is
invoked at every boot.
This doesn#t change the command that is invoked. That's because
previously already the "bootctl --graceful random-seed" did two things:
set the system token if not set yet *and* refresh the random seed in the
ESP. Previousy we put the focus on the former, now we shift the focus to
the latter.
With this simple change we can replace the logic
f913c784ad added, but from a service that
can run much later and doesn't keep the ESP pinned.
This adds two more phases to the PCR boot phase logic: "sysinit" +
"final".
The "sysinit" one is placed between sysinit.target and basic.target.
It's good to have a milestone in this place, since this is after all
file systems/LUKS volumes are in place (which sooner or later should
result in measurements of their own) and before services are started
(where we should be able to rely on them to be complete).
This is particularly useful to make certain secrets available for
mounting secondary file systems, but making them unavailable later.
This breaks API in a way (as measurements during runtime will change),
but given that the pcrphase stuff wasn't realeased yet should be OK.
This makes use of the option switch that was added in the previous commit.
We used a pretty big hammer on a relatively small nail: we would do daemon-reload
and (in principle) allow any configuration to be changed. But in fact we only
made use of this in systemd-fstab-generator. systemd-fstab-generator filters
out all mountpoints except /usr and those marked with x-initrd.mount, i.e. on
a big majority of systems it wouldn't do anything.
Also, since systemd-fstab-generator first parses /proc/cmdline, and then
initrd's /etc/fstab, and only then /sysroot/etc/fstab, configuration in the
host would only matter if it the same mountpoint wasn't configured "earlier".
So the config in the host could be used for new mountpoints, but it couldn't
be used to amend configuration for existing mountpoints. And we wouldn't actually
remount anything, so mountpoints that were already mounted wouldn't be affected,
even if did change some config.
In the new scheme, we will parse /sysroot/etc/fstab and explicitly start
sysroot-usr.mount and other units that we just wrote. In most cases (as written
above), this will actually result in no units being created or started.
If the generator is invoked on a system with /sysroot/etc/fstab present,
behaviour is not changed and we'll create units as before. This is needed so
that if daemon-reload is later at some points, we don't "lose" those units.
There's a minor bugfix here: we honour x-initrd.mount for swaps, but we
wouldn't restart swap.target, i.e. the new swaps wouldn't necessarilly be
pulled in immediately.
If for any reason something goes wrong during the boot process (most likely due
to a network issue), system admins should be allowed to log in to the system to
debug the problem. However due to the login session barrier enforced by
systemd-user-sessions.service for all users, logins for root will be delayed
until a (dbus) timeout expires. Beside being confusing, it's not a nice user
experience to wait for an indefinite period of time (no message is shown) this
and also suggests that something went wrong in the background.
The reason of this delay is due to the fact that all units involved in the
creation of a user session are ordered after systemd-user-sessions.service,
which is subject to network issues. If root needs to log in at that time,
logind is requested to create a new session (via pam_systemd), which ultimately
ends up waiting for systemd-user-session.service to be activated. This has the
bad side effect to block login for root until the dbus call done by pam_systemd
times out and the PAM stack proceeds anyways.
To solve this problem, this patch orders the session scope units and the user
instances only after systemd-user-sessions.service for unprivileged users only.
GIT_VERSION is not available as a config.h variable, because it's rendered
into version.h during builds. Let's rework jinja2 rendering to also
parse version.h. No functional change, the new variable is so far unused.
I guess this will make partial rebuilds a bit slower, but it's useful
to be able to use the full version string.
These unit (if enabled) will try to update the OS in regular intervals.
Moreover, every day in the early morning this will attempt to reboot the
system if there's a newer version installed than running.
The systemd-oomd.service unit contains
[Install]
WantedBy=multi-user.target
Alias=dbus-org.freedesktop.oom1.service
which means the symlink is supposed to be created dynamically when the
service is enabled.
When using "capture : true" in custom_target()s the mode of the source
file is not preserved when the generated file is not installed and so
needs to be tweaked manually. Switch from output capture to creating the
target file and copy the permissions from the input file.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
This adds support for dm integrity targets and an associated
/etc/integritytab file which is required as the dm integrity device
super block doesn't include all of the required metadata to bring up
the device correctly. See integritytab man page for details.
Compared to PID1 where systemd-oomd has to be the client to PID1
because PID1 is a more privileged process than systemd-oomd, systemd-oomd
is the more privileged process compared to a user manager so we have
user managers be the client whereas systemd-oomd is now the server.
The same varlink protocol is used between user managers and systemd-oomd
to deliver ManagedOOM property updates. systemd-oomd now sets up a varlink
server that user managers connect to to send ManagedOOM property updates.
We also add extra validation to make sure that non-root senders don't
send updates for cgroups they don't own.
The integration test was extended to repeat the chill/bloat test using
a user manager instead of PID1.
We don't need two (and half) templating systems anymore, yay!
I'm keeping the changes minimal, to make the diff manageable. Some enhancements
due to a better templating system might be possible in the future.
For handling of '## ' — see the next commit.
Old meson fails with:
Element not a string: [<Holder: <ExternalProgram 'sh' -> ['/bin/sh']>>, '-c', 'test -n "$DESTDIR" || /bin/journalctl --update-catalog']
I'm doing it as a revert so that it's easy to undo the revert when we require
newer meson. The effect is not so bad, maybe a dozen or so lines about finding
'sh'.
Meson 0.58 has gotten quite bad with emitting a message every time
a quoted command is used:
Program /home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh found: YES (/home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program xsltproc found: YES (/usr/bin/xsltproc)
Configuring custom-entities.ent using configuration
Message: Skipping bootctl.1 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping journal-remote.conf.5 because HAVE_MICROHTTPD is false
Message: Skipping journal-upload.conf.5 because HAVE_MICROHTTPD is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping loader.conf.5 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
...
Let's suffer one message only for each command. Hopefully we can silence
even this when https://github.com/mesonbuild/meson/issues/8642 is
resolved.
This changes the fstab-generator to handle mounting of /usr/ a bit
differently than before. Instead of immediately mounting the fs to
/sysroot/usr/ we'll first mount it to /sysusr/usr/ and then add a
separate bind mount that mounts it from /sysusr/usr/ to /sysroot/usr/.
This way we can access /usr independently of the root fs, without for
waiting to be mounted via the /sysusr/ hierarchy. This is useful for
invoking systemd-repart while a root fs doesn't exist yet and for
creating it, with partition data read from the /usr/ hierarchy.
This introduces a new generic target initrd-usr-fs.target that may be
used to generically order services against /sysusr/ to become available.
We'll leave this as opt-in (i.e. a unit that must be enabled
explicitly), since this is supposed to be a debug/developer feature
primarily, and thus no be around in regular production systems.
This adds the support for veritytab.
The veritytab file contains at most five fields, the first four are
mandatory, the last one is optional:
- The first field contains the name of the resulting verity volume; its
block device is set up /dev/mapper/</filename>.
- The second field contains a path to the underlying block data device,
or a specification of a block device via UUID= followed by the UUID.
- The third field contains a path to the underlying block hash device,
or a specification of a block device via UUID= followed by the UUID.
- The fourth field is the roothash in hexadecimal.
- The fifth field, if present, is a comma-delimited list of options.
The following options are recognized only: ignore-corruption,
restart-on-corruption, panic-on-corruption, ignore-zero-blocks,
check-at-most-once and root-hash-signature. The others options will
be implemented later.
Also, this adds support for the new kernel verity command line boolean
option "veritytab" which enables the read for veritytab, and the new
environment variable SYSTEMD_VERITYTAB which sets the path to the file
veritytab to read.
Instead of invoking meson-add-wants.sh once for each wants that has
to be added, we pass all wants to a single invocation of
meson-add-wants.sh and in meson-add-wants.sh, loop over the
arguments.
This saves about 300ms on the install step.
Before:
```
‣ Running build script...
[1/418] Generating version.h with a custom command
Installing /root/build/po/be.gmo to /root/dest/usr/share/locale/be/LC_MESSAGES/systemd.mo
Installing /root/build/po/be@latin.gmo to /root/dest/usr/share/locale/be@latin/LC_MESSAGES/systemd.mo
Installing /root/build/po/bg.gmo to /root/dest/usr/share/locale/bg/LC_MESSAGES/systemd.mo
Installing /root/build/po/ca.gmo to /root/dest/usr/share/locale/ca/LC_MESSAGES/systemd.mo
Installing /root/build/po/cs.gmo to /root/dest/usr/share/locale/cs/LC_MESSAGES/systemd.mo
Installing /root/build/po/da.gmo to /root/dest/usr/share/locale/da/LC_MESSAGES/systemd.mo
Installing /root/build/po/de.gmo to /root/dest/usr/share/locale/de/LC_MESSAGES/systemd.mo
Installing /root/build/po/el.gmo to /root/dest/usr/share/locale/el/LC_MESSAGES/systemd.mo
Installing /root/build/po/es.gmo to /root/dest/usr/share/locale/es/LC_MESSAGES/systemd.mo
Installing /root/build/po/fr.gmo to /root/dest/usr/share/locale/fr/LC_MESSAGES/systemd.mo
Installing /root/build/po/gl.gmo to /root/dest/usr/share/locale/gl/LC_MESSAGES/systemd.mo
Installing /root/build/po/hr.gmo to /root/dest/usr/share/locale/hr/LC_MESSAGES/systemd.mo
Installing /root/build/po/hu.gmo to /root/dest/usr/share/locale/hu/LC_MESSAGES/systemd.mo
Installing /root/build/po/id.gmo to /root/dest/usr/share/locale/id/LC_MESSAGES/systemd.mo
Installing /root/build/po/it.gmo to /root/dest/usr/share/locale/it/LC_MESSAGES/systemd.mo
Installing /root/build/po/ja.gmo to /root/dest/usr/share/locale/ja/LC_MESSAGES/systemd.mo
Installing /root/build/po/ko.gmo to /root/dest/usr/share/locale/ko/LC_MESSAGES/systemd.mo
Installing /root/build/po/lt.gmo to /root/dest/usr/share/locale/lt/LC_MESSAGES/systemd.mo
Installing /root/build/po/pl.gmo to /root/dest/usr/share/locale/pl/LC_MESSAGES/systemd.mo
Installing /root/build/po/pt_BR.gmo to /root/dest/usr/share/locale/pt_BR/LC_MESSAGES/systemd.mo
Installing /root/build/po/ro.gmo to /root/dest/usr/share/locale/ro/LC_MESSAGES/systemd.mo
Installing /root/build/po/ru.gmo to /root/dest/usr/share/locale/ru/LC_MESSAGES/systemd.mo
Installing /root/build/po/sk.gmo to /root/dest/usr/share/locale/sk/LC_MESSAGES/systemd.mo
Installing /root/build/po/sr.gmo to /root/dest/usr/share/locale/sr/LC_MESSAGES/systemd.mo
Installing /root/build/po/sv.gmo to /root/dest/usr/share/locale/sv/LC_MESSAGES/systemd.mo
Installing /root/build/po/tr.gmo to /root/dest/usr/share/locale/tr/LC_MESSAGES/systemd.mo
Installing /root/build/po/uk.gmo to /root/dest/usr/share/locale/uk/LC_MESSAGES/systemd.mo
Installing /root/build/po/zh_CN.gmo to /root/dest/usr/share/locale/zh_CN/LC_MESSAGES/systemd.mo
Installing /root/build/po/zh_TW.gmo to /root/dest/usr/share/locale/zh_TW/LC_MESSAGES/systemd.mo
Installing /root/build/po/pa.gmo to /root/dest/usr/share/locale/pa/LC_MESSAGES/systemd.mo
real 0m1.465s
user 0m1.025s
sys 0m0.426s
```
After:
```
‣ Running build script...
[1/418] Generating version.h with a custom command
Installing /root/build/po/be.gmo to /root/dest/usr/share/locale/be/LC_MESSAGES/systemd.mo
Installing /root/build/po/be@latin.gmo to /root/dest/usr/share/locale/be@latin/LC_MESSAGES/systemd.mo
Installing /root/build/po/bg.gmo to /root/dest/usr/share/locale/bg/LC_MESSAGES/systemd.mo
Installing /root/build/po/ca.gmo to /root/dest/usr/share/locale/ca/LC_MESSAGES/systemd.mo
Installing /root/build/po/cs.gmo to /root/dest/usr/share/locale/cs/LC_MESSAGES/systemd.mo
Installing /root/build/po/da.gmo to /root/dest/usr/share/locale/da/LC_MESSAGES/systemd.mo
Installing /root/build/po/de.gmo to /root/dest/usr/share/locale/de/LC_MESSAGES/systemd.mo
Installing /root/build/po/el.gmo to /root/dest/usr/share/locale/el/LC_MESSAGES/systemd.mo
Installing /root/build/po/es.gmo to /root/dest/usr/share/locale/es/LC_MESSAGES/systemd.mo
Installing /root/build/po/fr.gmo to /root/dest/usr/share/locale/fr/LC_MESSAGES/systemd.mo
Installing /root/build/po/gl.gmo to /root/dest/usr/share/locale/gl/LC_MESSAGES/systemd.mo
Installing /root/build/po/hr.gmo to /root/dest/usr/share/locale/hr/LC_MESSAGES/systemd.mo
Installing /root/build/po/hu.gmo to /root/dest/usr/share/locale/hu/LC_MESSAGES/systemd.mo
Installing /root/build/po/id.gmo to /root/dest/usr/share/locale/id/LC_MESSAGES/systemd.mo
Installing /root/build/po/it.gmo to /root/dest/usr/share/locale/it/LC_MESSAGES/systemd.mo
Installing /root/build/po/ja.gmo to /root/dest/usr/share/locale/ja/LC_MESSAGES/systemd.mo
Installing /root/build/po/ko.gmo to /root/dest/usr/share/locale/ko/LC_MESSAGES/systemd.mo
Installing /root/build/po/lt.gmo to /root/dest/usr/share/locale/lt/LC_MESSAGES/systemd.mo
Installing /root/build/po/pl.gmo to /root/dest/usr/share/locale/pl/LC_MESSAGES/systemd.mo
Installing /root/build/po/pt_BR.gmo to /root/dest/usr/share/locale/pt_BR/LC_MESSAGES/systemd.mo
Installing /root/build/po/ro.gmo to /root/dest/usr/share/locale/ro/LC_MESSAGES/systemd.mo
Installing /root/build/po/ru.gmo to /root/dest/usr/share/locale/ru/LC_MESSAGES/systemd.mo
Installing /root/build/po/sk.gmo to /root/dest/usr/share/locale/sk/LC_MESSAGES/systemd.mo
Installing /root/build/po/sr.gmo to /root/dest/usr/share/locale/sr/LC_MESSAGES/systemd.mo
Installing /root/build/po/sv.gmo to /root/dest/usr/share/locale/sv/LC_MESSAGES/systemd.mo
Installing /root/build/po/tr.gmo to /root/dest/usr/share/locale/tr/LC_MESSAGES/systemd.mo
Installing /root/build/po/uk.gmo to /root/dest/usr/share/locale/uk/LC_MESSAGES/systemd.mo
Installing /root/build/po/zh_CN.gmo to /root/dest/usr/share/locale/zh_CN/LC_MESSAGES/systemd.mo
Installing /root/build/po/zh_TW.gmo to /root/dest/usr/share/locale/zh_TW/LC_MESSAGES/systemd.mo
Installing /root/build/po/pa.gmo to /root/dest/usr/share/locale/pa/LC_MESSAGES/systemd.mo
real 0m1.162s
user 0m0.803s
sys 0m0.338s
```
This is useful for development where overwriting files out side
the configured prefix will affect the host as well as stateless
systems such as NixOS that don't let packages install to /etc but handle
configuration on their own.
Alternative to https://github.com/systemd/systemd/pull/17501
tested with:
$ mkdir inst build && cd build
$ meson \
-Dcreate-log-dirs=false \
-Dsysvrcnd-path=$(realpath ../inst)/etc/rc.d \
-Dsysvinit-path=$(realpath ../inst)/etc/init.d \
-Drootprefix=$(realpath ../inst) \
-Dinstall-sysconfdir=false \
--prefix=$(realpath ../inst) ..
$ ninja install
[zjs: Replaces #17149.
I took half of the patch in
https://github.com/systemd/systemd/pull/17149#issuecomment-698399194,
hence I'm keeping Jonathan's authorship.
The original reasoning for 6c5496c492 was that we
enable remote-cryptsetup.target via presets, and since presets are not used for
the initrd, we need a different target. But since parts of the unit and target
tree are shared between the initramfs and the main system, we can't just create
a separate target for the initramfs. All the targets that depend on this one
would need to be split also. That condition is true for initrd-fs.target, but
not for sysinit.target.
So let's instead just uncoditionally pull in remote-cryptsetup.target in the
initramfs. It should normally be empty, so there should be no impact on boots
that don't have units in the target.
Jonathan's patch used initrd-root-fs.target, this version instead uses
initrd-root-device.target. initrd-root-device.target is ordered before
sysroot.mount, which means that the decrypted devices will be available earlier
too.]
This reverts commit 6c5496c492.
sysinit.target is shared between the initrd and the host system. Pulling in
initrd-cryptsetup.target into sysinit.target causes the following warning at
boot:
Oct 27 10:42:30 workstation-uefi systemd[1]: initrd-cryptsetup.target: Starting requested but asserts failed.
Oct 27 10:42:30 workstation-uefi systemd[1]: Assertion failed for initrd-cryptsetup.target.
For encrypted block devices that we need to unlock from the initramfs,
we currently rely on dracut shipping `cryptsetup.target`. This works,
but doesn't cover the case where the encrypted block device requires
networking (i.e. the `remote-cryptsetup.target` version). That target
however is traditionally dynamically enabled.
Instead, let's rework things here by adding a `initrd-cryptsetup.target`
specifically for initramfs encrypted block device setup. This plays the
role of both `cryptsetup.target` and `remote-cryptsetup.target` in the
initramfs.
Then, adapt `systemd-cryptsetup-generator` to hook all generated
services to this new unit when running from the initrd. This is
analogous to `systemd-fstab-generator` hooking all mounts to
`initrd-fs.target`, regardless of whether they're network-backed or not.
Add a new target for synchronizing units that wish to run once during
the first boot of the system. The machine-id will be committed to disk
only after the target has been reached, thus ensuring that all units
ordered before it had a chance to complete.
Let's explicitly deactivate all home dirs on shutdown, in order to
properly synchronizing unmounting and avoiding blocking devices.
Previously, we'd rely on automatic deactivation when home directories
become unused. However, that scheme is asynchronous, and ongoing
deactviations might conflicts with attempts to unmount /home. Let's fix
that by providing an explicit service systemd-homed-activate.service
whose only job is to have a ExecStop= line that explicitly deactivates
all home directories on shutdown. This service can the be ordered after
home.mount and similar, ensuring that we'll first deactivate all homes
before deactivating /home itself during shutdown.
This is kept separate from systemd-homed.service so that it is possible
to restart systemd-homed.service without deactivating all home
directories.
Fixes: #16842
This reverts commit 7e1ed1f3b2.
systemd-repart is not a user service that should be something people
enable/disable, instead it should just work if there's configuration for
it. It's like systemd-tmpfiles, systemd-sysusers, systemd-load-modules,
systemd-binfmt, systemd-systemd-sysctl which are NOPs if they have no
configuration, and thus don't hurt, but cannot be disabled since they
are too deep part of the OS.
This doesn't mean people couldn't disable the service if they really
want to, there's after all "systemctl mask" and build-time disabling,
but those are OS developer facing instead of admin facing, that's how it
should be.
Note that systemd-repart is in particular an initrd service, and so far
enable/disable state of those is not managed anyway via "systemctl
enable/disable" but more what dracut decides to package up and what not.
It's lightweight and generally useful, so it should be enabled by default. But
users might want to disable it for whatever reason, and things should be fine
without it, so let's make it installable so it can be disabled if wanted.
Fixes#15175.
This essentially adds another layer of configurability:
build disable, this, presence of configuration. The default is
set to enabled, because the service does nothing w/o config.
Kernel 4.1 separated the tracing system from the debugfs,
actual documentation already points to a different path
that needs this new mount to exist.
the old sysfs path will still be an automount in the debugfs,
created by the kernel (for now).
Signed-off-by: Norbert Lange <nolange79@gmail.com>
If we have exit on idle, then operations such as "journalctl
--namespace=foo --rotate" should work even if the journal daemon is
currently not running.
(Note that we don't do activation by varlink for the main instance of
journald, I am not sure the deadlocks it might introduce are worth it)