20-systemd-ssh-generator.conf expands SSHCONFDIR, which is bogus when we
build with -Dsshconfdir=no. Similarly, avoid expanding SSHDCONFDIR in
20-systemd-userdb.conf when building with -Dsshconfdir=no.
Follow-up 6c7fc5d5f2.
This adds a tiny binary that is hooked into SSH client config via
ProxyCommand and which simply connects to an AF_UNIX or AF_VSOCK socket
of choice.
The syntax is as simple as this:
ssh unix/some/path # (this connects to AF_UNIX socket /some/path)
or:
ssh vsock/4711
I used "/" as separator of the protocol ID and the value since ":" is
already taken by SSH itself when doing sftp. And "@" is already taken
for separating the user name.
sshd now supports config file drop-ins, hence let's install one to hook
up "userdb ssh-authorized-keys", so that things just work.
We put the drop-in relatively early, so that other drop-ins generally
will override this.
Ideally sshd would support such drop-ins in /usr/ rather than /etc/, but
let's take what we can get. It's not that sshd's upstream was
particularly open to weird ideas from Linux people.
This adds a tmpfiles.d/ snippet for LoadCredential= style credentials
directories in /etc/ and /run/.
This is done primarily to ensure that the access modes for the dirs are
set up properly, in the most restrictive ways. Specifically these are
set to 0000, so that CAP_DAC_OVERRIDE is necessary to enumerate and read
the credentials, and being UID=0 is not sufficient to do so.
This creates /etc/credstore/, but leaves /run/credstore/ absent if
missing, for now. Thinking is: the latter being non-persistent is
created by software usually, not manually by users, and hence more
likely right. But dunno, we might want to revisit this sooner or later.
This is ultimately an exercise to advertise the LoadCredential= concept
a bit, and do so in a reasonably secure way, underlining the safety of
the concept.
Many distributions ship systemd-networkd as a separate file so we
need to be able to ship the tmpfiles networkd entries as part of
that separate networkd package. Let's split the networkd entries
into a separate file to make that possible.
GIT_VERSION is not available as a config.h variable, because it's rendered
into version.h during builds. Let's rework jinja2 rendering to also
parse version.h. No functional change, the new variable is so far unused.
I guess this will make partial rebuilds a bit slower, but it's useful
to be able to use the full version string.
This mirrors what was done in 564761fcae
for sysusers.d. If we allow separating resolved sysusers config
in a subpackage, we should do the same for the symlink that is
only useful when resolved is installed.
Related to #21317.
When using "capture : true" in custom_target()s the mode of the source
file is not preserved when the generated file is not installed and so
needs to be tweaked manually. Switch from output capture to creating the
target file and copy the permissions from the input file.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Ubuntu Bionic 18.04 has 0.45, so it was below the previously required
minimum version already. Focal 20.04 has 0.53.2. Let's require that
and use various features that are available.
This moves the /var/log/README content out of /var and into the
docs location, replacing the previous file with a symlink
created through a tmpfiles.d entry.
Recent meson versions include the directory name in the target name,
so there is no conflict for files with the same name in different
directories. But at least with meson-0.49.2 in buster we have conflict
with sysusers.d/systemd.conf.
HAVE_SMACK_RUN_LABEL was dropped back in 348b44372f,
so one line in etc.conf was not rendered as expected ;(
Checking if names are defined is paying for itself!
This is useful for development where overwriting files out side
the configured prefix will affect the host as well as stateless
systems such as NixOS that don't let packages install to /etc but handle
configuration on their own.
Alternative to https://github.com/systemd/systemd/pull/17501
tested with:
$ mkdir inst build && cd build
$ meson \
-Dcreate-log-dirs=false \
-Dsysvrcnd-path=$(realpath ../inst)/etc/rc.d \
-Dsysvinit-path=$(realpath ../inst)/etc/init.d \
-Drootprefix=$(realpath ../inst) \
-Dinstall-sysconfdir=false \
--prefix=$(realpath ../inst) ..
$ ninja install
The systemd pstore service archives the contents of /sys/fs/pstore
upon boot so that there is room for a subsequent dump. The issue is
that while the service is present, the kernel still needs to be
configured to write data into the pstore. The kernel has two
parameters, crash_kexec_post_notifiers and printk.always_kmsg_dump,
that control writes into pstore.
The crash_kexec_post_notifiers parameter enables the kernel to write
dmesg (including stack trace) into pstore upon a panic, and
printk.always_kmsg_dump parameter enables the kernel to write dmesg
upon a shutdown (shutdown, reboot, halt).
As it stands today, these parameters are not managed/manipulated by
the systemd pstore service, and are solely reliant upon the user [to
have the foresight] to set them on the kernel command line at boot, or
post boot via sysfs. Furthermore, the user would need to set these
parameters in a persistent fashion so that that they are enabled on
subsequent reboots.
This patch introduces the setting of these two kernel parameters via
the systemd tmpfiles technique.
If systemd is not built with PAM support, systemd-user-sessions.service
won't be built. On systems without PAM, /run/nologin is useless. On
systems with PAM but systemd is not built with PAM, /run/nologin won't
be removed and all unprivileged users can't login.
So, we should not create /run/nologin if systemd is built without PAM.
tmp.conf was dealing with 2 different kind of paths: one dealing with general
temporary paths such as /var/tmp and /tmp and the other one dealing with
temporary directories owned by systemd.
If for example a user wants to adjust the age argument of the general paths
only, he had to overload the whole file which is cumbersome and error prone
since any future changes in tmp.conf shipped by systemd will be lost.
So this patch splits out tmp.conf so the systemd directories are dealt
separately in a dedicated conf file. It's named "systemd-tmp.conf" based on the
naming recommendation made in tmpfiles.d man page.
In practice it shouldn't cause any regression since it's very unlikely that
users override paths owned by systemd.
This adds a small service "systemd-portabled" and a matching client
"portablectl", which implement the "portable service" concept.
The daemon implements the actual operations, is PolicyKit-enabled and is
activated on demand with exit-on-idle.
Both the daemon and the client are an optional build artifact, enabled
by default rhough.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
The directories are only used by the specific services, and
created before the services are started. So, it is not necessary
to create them by systemd-tmpfiles.
Using conf.set() with a boolean argument does the right thing:
either #ifdef or #undef. This means that conf.set can be used unconditionally.
Previously I used '1' as the placeholder value, and that needs to be changed to
'true' for consistency (under meson 1 cannot be used in boolean context). All
checks need to be adjusted.
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
This is the equivalent of $(INSTALL_DIRS) and install-touch-usr-hook.
I did not bother to create the directories into which we install files,
since they will be created anyway.
v2:
- remove bashism
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
