To me this is the last major basic functionality that couldn't be
configured via credentials: the network.
We do not invent any new format for this, but simply copy relevant creds
1:1 into /run/systemd/network/ to open up the full functionality of
networkd to VM hosts.
Distributions apparently only compile a subset of TPM2 drivers into the
kernel. For those not compiled it but provided as kmod we need a
synchronization point: we must wait before the first TPM2 interaction
until the driver is available and accessible.
This adds a tpm2.target unit as such a synchronization point. It's
ordered after /dev/tpmrm0, and is pulled in by a generator whenever we
detect that the kernel reported a TPM2 to exist but we have no device
for it yet.
This should solve the issue, but might create problems: if there are TPM
devices supported by firmware that we don't have Linux drivers for we'll
hang for a bit. Hence let's add a kernel cmdline switch to disable (or
alternatively force) this logic.
Fixes: #30164
This extends what systemd-firstboot does and runs on first boots only
and either processes user records passed in via credentials to create,
or asks the user interactively to create one (only if no regular user
exists yet).
The unit will be started or restarted a few times during boot, but but it has
StartLimitBurst = DefaultStartLimitBurst = 5, which means that the fifth
restart will already fail. On my laptop, I have exactly 4 restarts, so I don't
hit the limit, but on a slightly different system we will easily hit the limit.
In https://bugzilla.redhat.com/show_bug.cgi?id=2251394, there are five reloads
and we hit the limit.
Since 6ef512c0bb we propagate the start counter
over switch-root and daemon reloads, so it's easier to hit the limit during
boot.
In principle there might be systems with lots of vtcon devices, so let's just
allow the unit to be restarted without a limit.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=2251394.
This implements a "storage target mode", similar to what MacOS provides
since a long time as "Target Disk Mode":
https://en.wikipedia.org/wiki/Target_Disk_Mode
This implementation is relatively simple:
1. a new generic target "storage-target-mode.target" is added, which
when booted into defines the target mode.
2. a small tool and service "systemd-storagetm.service" is added which
exposes a specific device or all devices as NVMe-TCP devices over the
network. NVMe-TCP appears to be hot shit right now how to expose
block devices over the network. And it's really simple to set up via
configs, hence our code is relatively short and neat.
The idea is that systemd-storagetm.target can be extended sooner or
later, for example to expose block devices also as USB mass storage
devices and similar, in case the system has "dual mode" USB controller
that can also work as device, not just as host. (And people could also
plug in sharing as NBD, iSCSI, whatever they want.)
How to use this? Boot into your system with a kernel cmdline of
"rd.systemd.unit=storage-target-mode.target ip=link-local", and you'll see on
screen the precise "nvme connect" command line to make the relevant
block devices available locally on some other machine. This all requires
that the target mode stuff is included in the initrd of course. And the
system will the stay in the initrd forever.
Why bother? Primarily three use-cases:
1. Debug a broken system: with very few dependencies during boot get
access to the raw block device of a broken machine.
2. Migrate from system to another system, by dd'ing the old to the new
directly.
3. Installing an OS remotely on some device (for example via Thunderbolt
networking)
(And there might be more, for example the ability to boot from a
laptop's disk on another system)
Limitations:
1. There's no authentication/encryption. Hence: use this on local links
only.
2. NVMe target mode on Linux supports r/w operation only. Ideally, we'd
have a read-only mode, for security reasons, and default to it.
Future love:
1. We should have another mode, where we simply expose the homed LUKS
home dirs like that.
2. Some lightweight hookup with plymouth, to display a (shortened)
version of the info we write to the console.
To test all this, just run:
mkosi --kernel-command-line-extra="rd.systemd.unit=storage-target-mode.target" qemu
modprobe treats "-" and "_" interchangeably, thereby avoiding frequent
errors because some module names contain dashes and others underscores.
Because modprobe@.service unescapes the instance name, an attempt to
start "modprobe@dm-crypt.service" will run "modprobe -abq dm/crypt",
which is doomed to fail. "modprobe@dm_crypt.service" will work as
expected. Thus unescaping the instance name has surprising side effects.
Use "%i" instead.
When --boot is set, and --keep-unit is not, set CoredumpReceive=yes on
the scope allocated for the container. When --keep-unit is set, nspawn
does not allocate the container's unit, so the existing unit needs to
configure this setting itself.
Since systemd-nspawn@.service sets --boot and --keep-unit, add
CoredumpReceives=yes to that unit.
As systemd-journal-upload deals mostly with remote servers, add
some failsafes to its unit to restart on failures.
```
[Service]
Restart=on-failure
RestartSteps=10
RestartMaxDelaySec=60
```
This is primarily supposed to be a 1st step with varlinkifying our
various command line tools, and excercise in how this might look like
across our codebase one day. However, at AllSystemsGo! 2023 it was
requested that we provide an API to do a PCR measurement along with a
matching event log record, and this provides that.
This adds an explicit service for initializing the TPM2 SRK. This is
implicitly also done by systemd-cryptsetup, hence strictly speaking
redundant, but doing this early has the benefit that we can parallelize
this in a nicer way. This also write a copy of the SRK public key in PEM
format to /run/ + /var/lib/, thus pinning the disk image to the TPM.
Making the SRK public key is also useful for allowing easy offline
encryption for a specific TPM.
Sooner or later we should probably grow what this service does, the
above is just the first step. For example, the service should probably
offer the ability to reset the TPM (clear the owner hierarchy?) on a
factory reset, if such a policy is needed. And we might want to install
some default AK (?).
Fixes: #27986
Also see: #22637
Follow-up for d120ce478d
blockdev@.target is used as a synchronization point between
the mount unit and corresponding systemd-cryptsetup@.service.
After the mentioned commit, it doesn't get a stop job enqueued
during shutdown, and thus the stop job for systemd-cryptsetup@.service
could be run before the mount unit is stopped.
Therefore, let's make blockdev@.target conflict with umount.target,
which is also what systemd-cryptsetup@.service does.
Fixes#29336
So, unfortunately oomd uses "io.system." rather than "io.systemd." as
prefix for its sockets. This is a mistake, and doesn't match the
Varlink interface naming or anything else in oomd.
hence, let's fix that.
Given that this is an internal protocol between PID1 and oomd let's
simply change this without retaining compat.
The tool initially just measured the boot phase, but was subsequently
extended to measure file system and machine IDs, too. At AllSystemsGo
there were request to add more, and make the tool generically
accessible.
Hence, let's rename the binary (but not the pcrphase services), to make
clear the tool is not just measureing the boot phase, but a lot of other
things too.
The tool is located in /usr/lib/ and still relatively new, hence let's
just rename the binary and be done with it, while keeping the unit names
stable.
While we are at it, also move the tool out of src/boot/ and into its own
src/pcrextend/ dir, since it's not really doing boot related stuff
anymore.
When booting from virtiofs, we won't be able to find a root block
device. Let's gracefully handle this similar to how we don't fail
if we can't find a GPT partition table.
Before this commit, the hibernate location logic only exists in
the generator. Also, we compare device nodes (devnode_same()) and
clear EFI variable HibernateLocation in the generator too. This is
not ideal though: when the generator gets to run, udev hasn't yet
started, so effectively devnode_same() always fails. Moreover, if
the boot process is interrupted by e.g. battery-check, the hibernate
information is lost.
Therefore, let's split out the logic of finding hibernate location.
The generator only does the initial validation of system info and
enables systemd-hibernate-resume.service, and when the service
actually runs we validate everything again, which includes comparing
the device nodes and clearing the EFI variable. This should make
things more robust, plus systems that don't utilize a systemd-enabled
initrd can use the exact same logic to resume using the EFI variable.
I.e., systemd-hibernate-resume can be used standalone.
Otherwise the root filesystem might still be readonly and
systemd-userdbd fails to start.
Explicitly pick systemd-remount-fs.service instead of local-fs-pre.target
to prevent a dependency cycle.
- add reference to the service unit in the man page,
- fix several indentation and typos,
- replace '(uint64_t) -1' with 'UINT64_MAX',
- drop unnecessary 'continue'.
