The configuration ROM of Acoustic Reality eAR Master One, Eroica, Figaro,
and Ciaccona has OUI for TerraTec Electronic GmbH in its vendor ID field.
As a result, modalias for the unit is the same as Terratec Electronic
Aureon 7.1 FireWire.
Linux FireWire subsystem adds the same modalias for units of the models.
ALSA bebob driver had duplicated entries for them and was changed at
Linux kernel v5.14 to remove the duplicated entries.
It's better to improve corresponding entries in systemd hwdb, while
it's impossible to distinguish the models by modalias and force to use
the same entry for them. As last resort, this commit selects more
popular model, Aureon 7.1 FireWire for ID_VENDOR_FROM_DATABASE and
ID_MODEL_FROM_DATABASE.
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a07ebc7e050ccdfec508449b2ef8f2b2aa90927b
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
I had misunderstanding that BridgeCo ASIC would be used for extension
option for Mackie d.2 and OXFW971 would be used for Mackie d.2 Pro like
Mackie d.4 Pro. However, it's clear that the latter is model with
pre-installed option.
This commit fixes commit to entry for Mackie d.2. I note that the modalias
of unit of Mackie d.4 Pro is still unidentified.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Some Mackie Onyx-i models are known to have two revisions at least, which
use different ASICS; Oxford Semiconductor FW971 and TC Applied
Technologies TCD2210. I misunderstand that Onyx 1640i had not such
revisions.
This commit fixes comment to entry for the model.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Some of Phonic Firefly series and Helix Board series have the same
combination of vendor ID, model ID, specifier ID, and software
version in their configuration ROM. On the other hand, the other models
have unique combination.
ALSA bebob driver in Linux kernel v5.14 was changed in its modalias table
for the models.
This commit fixes systemd hwdb for the models.
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1586d461f641b60040438275e14c7dbcec5907d6
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This graphic chip doesn't have a DRM driver and fall back to vesa-framebuffer
driver.
Without this patch, users of such chip suddenly see their GUI broken without
any indication or reason of what happened (no error message). Hence this
regression is near to impossible to troubleshoot for end users. Such case was
reported https://bugzilla.opensuse.org/show_bug.cgi?id=1187154.
Rather than adding another exception in the udev rules to deal with such
HWs, they instead get their own hwdb file '60-seat.hwdb'.
The Pinebook Pro touchpad returns a resolution data that is 2 times of
the real value, which makes libinput think the touchpad is only 1/4 the
real size.
Add a resolution override value for it, to allow libinput to calculate
the distance moved on it correctly.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Recently the kernel has gotten support for reading the mount-matrix for
BMA250 sensors represented by a BOSC0200 ACPI device from the ACPI tables,
so that we don't need to add quirks for these.
At least that was the theory. The Chuwi Hi13 (CWI534) with BMA250 sensor
has the sensor mounted such that it works / needs the normal(ized) matrix,
but the ACPI tables actually contain a wrong matrix inverting the X and Y
axis.
Add a quirk to override /sys/bus/iio/devices/iio:device?/in_mount_matrix
with the norm-matrix, since the ACPI derived matrix is actually wrong on
these devices (sigh)
Altough the Logitech website states "1000 DPI", the default DPI
settings seems to be 800 as shown by older versions of Logitech
SetPoint and verification by mouse-dpi-tool.
The old settings were all over the place contained mixed refresh rates.
The new settings are the correct default DPI settings as advertised online.
This has also been confirmed in the latest Logitech Gaming Software (9.02.65).
The atkbd device on the Lenovo Yoga 300-11IBR 2-in-1 sends unknown
keycodes when the touchpad is toggled on/off:
[ 1918.995562] atkbd serio0: Unknown key pressed (translated set 2, code 0x63 on isa0060/serio0).
[ 1918.995610] atkbd serio0: Use 'setkeycodes 63 <keycode>' to make it known.
[ 1919.032121] atkbd serio0: Unknown key released (translated set 2, code 0x63 on isa0060/serio0).
[ 1919.032135] atkbd serio0: Use 'setkeycodes 63 <keycode>' to make it known.
[ 1926.098414] atkbd serio0: Unknown key pressed (translated set 2, code 0x62 on isa0060/serio0).
[ 1926.098461] atkbd serio0: Use 'setkeycodes 62 <keycode>' to make it known.
[ 1926.146537] atkbd serio0: Unknown key released (translated set 2, code 0x62 on isa0060/serio0).
[ 1926.146583] atkbd serio0: Use 'setkeycodes 62 <keycode>' to make it known.
The "Ideapad extra buttons" driver alreadys sends f22 / f23 key-events
when the touchpad is toggles off, so map the keycodes for the duplicate
atkbd events to unknown to silence these kernel warnings.
Old meson fails with:
Element not a string: [<Holder: <ExternalProgram 'sh' -> ['/bin/sh']>>, '-c', 'test -n "$DESTDIR" || /bin/journalctl --update-catalog']
I'm doing it as a revert so that it's easy to undo the revert when we require
newer meson. The effect is not so bad, maybe a dozen or so lines about finding
'sh'.
Meson 0.58 has gotten quite bad with emitting a message every time
a quoted command is used:
Program /home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh found: YES (/home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program xsltproc found: YES (/usr/bin/xsltproc)
Configuring custom-entities.ent using configuration
Message: Skipping bootctl.1 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping journal-remote.conf.5 because HAVE_MICROHTTPD is false
Message: Skipping journal-upload.conf.5 because HAVE_MICROHTTPD is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping loader.conf.5 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
...
Let's suffer one message only for each command. Hopefully we can silence
even this when https://github.com/mesonbuild/meson/issues/8642 is
resolved.
- Internet specifications give 1600 DPI @ 1000Hz for this sensor
- Confirmed experimentally via `mouse-dpi-tool`
- vid, pid, and name match string from `mouse-dpi-tool`
I have also seen that VIOS LTH17 has the exact same correction and it's also a SIPODEV composite hid device also through usb. In the D330 is a detachable keyboard. It's possible that a very generic way to apply this to at least affected sipodev keyboard could be found using the device ids, but needs info to do that and ensure all sipodev keyboard with the pertinent ids need it.
Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
We use pvr match for efifb pitch and drm orientation quirk and in touchpad toggle keymap. Also seems most consistent with the devices here.
While at it, correct a typo, 81H3 and 81MD are product names not numbers, my bad.
Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
D330-10IGM has been added due the fact that 81H3 and 81MD product name belongs to the same product version. So the fact is that now that we know 81MD has the same transformation matrix that the 81H3 we can just use the product version and get rid the product name.
Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
