As I noticed a lot of missing information when trying to implement checking
for missing info. I reimplemented the version information script to be more
robust, and here is the result.
Follow up to ec07c3c80b
This tries to add information about when each option was added. It goes
back to version 183.
The version info is included from a separate file to allow generating it,
which would allow more control on the formatting of the final output.
The command is deprecated, as per NEWS of 254. Let's go one step further
and remove it from the help text and man page, so that people are not
inspired to use it at this time anymore.
This is how we usually have done this before: remove it from visibility,
but support it for a while still.
As mentioned in the NEWS entry, it seems to see very little use, but adds
complexity in our code. It was added mainly with the goal of making it easier
for people using grub2 to modify their boot configuration, but grub2 is gaining
support for BLS snippets. On the systemd side, we now have credentials. So
let's deprecate this, and if there's no outcry, remove it in a few releases.
This drops all mentions of gnu-efi and its manual build machinery. A
future commit will bring bootloader builds back. A new bootloader meson
option is now used to control whether to build sd-boot and its userspace
tooling.
We already have this nice code in system that determines the block
device backing the root file system, but it's only used internally in
systemd-gpt-generator. Let's make this more accessible and expose it
directly in bootctl.
It doesn't fit immediately into the topic of bootctl, but I think it's
close enough and behaves very similar to the existing "bootctl
--print-boot-path" and "--print-esp-path" tools.
If --print-root-device (or -R) is specified once, will show the block device
backing the root fs, and if specified twice (probably easier: -RR) it
will show the whole block device that block device belongs to in case it
is a partition block device.
Suggested use:
# cfdisk `bootctl -RR`
To get access to the partition table, behind the OS install, for
whatever it might be.
grub (at least on fedora) nowadays implements the boot loader spec, but
not the boot loader interface. Hence let's split out the commands
specific to each in two groups in the --help text. This way the first
group just covers boot lodaer spec stuff (i.e. stuff on disk in the
ESP/XBOOTLDR partition). And the other covers talking to the boot loader
via EFI var.
The unlink command removes an entry from the ESP including
referenced files that are not referenced in other entries. That is
useful eg to have multiple entries that use the same kernel with
different options.
The cleanup command removes all files that are not referenced by any
entry.
Fixes#25780.
> Man page: crypttab.5
> Issue 1: Missing fullstop
> Issue 2: I<cipher=>, I<hash=>, I<size=> → B<cipher=>, B<hash=>, B<size=>
>
> "Force LUKS mode\\&. When this mode is used, the following options are "
> "ignored since they are provided by the LUKS header on the device: "
> "I<cipher=>, I<hash=>, I<size=>"
Seems OK to me. The full stop is there and has been for at least a few years. And we use <option> for the markup, which is appropriate here.
> Man page: crypttab.5
> Issue 1: Missing fullstop
> Issue 2: I<cipher=>, I<hash=>, I<keyfile-offset=>, I<keyfile-size=>, I<size=> → B<cipher=>, B<hash=>, B<keyfile-offset=>, B<keyfile-size=>, B<size=>
>
> "Use TrueCrypt encryption mode\\&. When this mode is used, the following "
> "options are ignored since they are provided by the TrueCrypt header on the "
> "device or do not apply: I<cipher=>, I<hash=>, I<keyfile-offset=>, I<keyfile-"
> "size=>, I<size=>"
Same.
> Man page: journalctl.1
> Issue 1: make be → may be
Fixed.
> Issue 2: below\\&. → below:
Fixed.
> Man page: journalctl.1
> Issue: Colon at the end?
>
> "The following commands are understood\\&. If none is specified the default "
> "is to display journal records\\&."
> msgstr ""
> "Die folgenden Befehle werden verstanden\\&. Falls keiner festgelegt ist, ist "
> "die Anzeige von Journal-Datensätzen die Vorgabe\\&."
This is a bit awkward, but I'm not sure how to fix it.
> Man page: kernel-install.8
> Issue: methods a fallback → methods fallback
It was correct, but I added a comma to make the sense clearer.
> Man page: loader.conf.5
> Issue 1: secure boot variables → Secure Boot variables
> Issue 2: one → one for (multiple times)
>
> "Supported secure boot variables are one database for authorized images, one "
> "key exchange key (KEK) and one platform key (PK)\\&. For more information, "
> "refer to the \\m[blue]B<UEFI specification>\\m[]\\&\\s-2\\u[2]\\d\\s+2, "
> "under Secure Boot and Driver Signing\\&. Another resource that describe the "
> "interplay of the different variables is the \\m[blue]B<EDK2 "
> "documentation>\\m[]\\&\\s-2\\u[3]\\d\\s+2\\&."
"one of" would sound strange. "One this and one that" is OK.
> Man page: loader.conf.5
> Issue: systemd-boot → B<systemd-boot>(7)
Fixed.
> Man page: logind.conf.5
> Issue: systemd-logind → B<systemd-logind>(8)
We use <filename>systemd-logind</> on subsequent references… I think that's good enough.
> Man page: nss-myhostname.8
> Issue: B<getent> → B<getent>(1)
Fixed.
> Man page: nss-resolve.8
> Issue: B<systemd-resolved> → B<systemd-resolved>(8)
The first reference does this, subsequent are shorter.
> Man page: os-release.5
> Issue: Portable Services → Portable Services Documentation?
Updated.
> Man page: pam_systemd_home.8
> Issue: auth and account use "reason", while session and password do not?
Reworded.
> Man page: portablectl.1
> Issue: In systemd-portabled.service(8): Portable Services Documentation
Updated.
> Man page: repart.d.5
> Issue: The partition → the partition
Fixed.
> Man page: repart.d.5
> Issue: B<systemd-repart> → B<systemd-repart>(8)
The first reference does this. I also change this one, because it's pretty far down in the text.
> Man page: systemd.1
> Issue: kernel command line twice?
>
> "Takes a boolean argument\\&. If false disables importing credentials from "
> "the kernel command line, qemu_fw_cfg subsystem or the kernel command line\\&."
Apparently this was fixed already.
> Man page: systemd-boot.7
> Issue: enrollement → enrollment
Fixed.
> Man page: systemd-cryptenroll.1
> Issue: multiple cases: any specified → the specified
Reworded.
> Man page: systemd-cryptenroll.1
> Issue: If this this → If this
Fixed tree-wide.
> Man page: systemd-cryptsetup-generator.8
> Issue: and the initrd → and in the initrd
"Is honoured by the initrd" is OK, because we often speak about the initrd as a single unit. But in the same paragraph we also used "in the initrd", which makes the other use look sloppy. I changed it to "in the initrd" everywhere in that file.
> Man page: systemd.directives.7
> Issue: Why are these two quoted (but not others)?
>
> "B<\\*(Aqh\\*(Aq>"
>
> B<\\*(Aqs\\*(Aq>"
>
> "B<\\*(Aqy\\*(Aq>"
This is autogenerated from files… We use slightly different markup in different files, and it's just too hard to make it consistent. We gave up on this.
> Man page: systemd.exec.5
> Issue 1: B<at>(1p) → B<at>(1)
> Issue 2: B<crontab>(1p) → B<crontab>(1)
Fixed.
> Man page: systemd.exec.5
> Issue: B<select()> → B<select>(2)
Fixed.
> Man page: systemd.exec.5
> Issue: qemu → B<qemu>(1)
The man page doesn't seem to be in any of the canonical places on the web.
I added a link to online docs.
> Man page: systemd.exec.5
> Issue: variable → variables
Seems to be fixed already.
> Man page: systemd-integritysetup-generator.8
> Issue: systemd-integritysetup-generator → B<systemd-integritysetup-generator>
I changed <filename> to <command>.
> Man page: systemd-integritysetup-generator.8
> Issue: superfluous comma at the end
Already fixed.
> Man page: systemd-measure.1
> Issue: (see B<--pcr-bank=>) below → (see B<--pcr-bank=> below)
Reworded.
> Man page: systemd-measure.1
> Issue: =PATH> → =>I<PATH>
Fixed.
> Man page: systemd-measure.1.po
> Issue: B<--bank=DIGEST> → B<--bank=>I<DIGEST>
Fixed.
> Man page: systemd.netdev.5
> Issue: os the → on the
Appears to have been fixed already.
> Man page: systemd.netdev.5
> Issue: Onboard → On-board (as in previous string)
Updated.
> Man page: systemd.network.5
> Issue: B<systemd-networkd> -> B<systemd-networkd>(8)
First reference does this, subsequent do not.
> Man page: systemd.network.5
> Issue: B<netlabelctl> → B<netlabelctl>(8)
First reference does this, subsequent do not.
> Man page: systemd.network.5
> Issue: Missing verb (aquired? configured?) in the half sentence starting with "or by a "
I dropped the comma.
> Man page: systemd-nspawn.1
> Issue: All host users outside of that range → All other host users
Reworded.
> # FIXME no effect → no effect\\&.
> #. type: Plain text
> #: archlinux debian-unstable fedora-rawhide mageia-cauldron opensuse-tumbleweed
> msgid ""
> "Whichever ID mapping option is used, the same mapping will be used for users "
> "and groups IDs\\&. If B<rootidmap> is used, the group owning the bind "
> "mounted directory will have no effect"
A period is added. Not sure if there's some other issue.
> Man page: systemd-oomd.service.8
> Issue: B<systemd> → B<systemd>(1)
Done.
> Man page: systemd.path.5
> Issue 1: B<systemd.exec>(1) → B<systemd.exec>(5)
> Issue 2: This section does not (yet?) exist
Fixed.
> Man page: systemd-pcrphase.service.8
> Issue 1: indicate phases into TPM2 PCR 11 ??
> Issue 2: Colon at the end of the paragraph?
Fixed.
> Man page: systemd-pcrphase.service.8
> Issue: final boot phase → final shutdown phase?
Updated.
> Man page: systemd-pcrphase.service.8
> Issue: for the the → for the
Fixed tree-wide.
> Man page: systemd-portabled.service.8
> Issue: In systemd-portabled.service(8): Portable Services Documentation
Updated.
> Man page: systemd-pstore.service.8
> Issue: Here and the following paragraphs: . → \\&. // Upstream: What does this comment mean? // You normally write \\&. for a full dot (full stop etc.); here you write only "." (i.e. a plain dot).
>
> "and we look up \"localhost\", nss-dns will send the following queries to "
> "systemd-resolved listening on 127.0.0.53:53: first \"localhost.foobar.com\", "
> "then \"localhost.barbar.com\", and finally \"localhost\". If (hopefully) the "
> "first two queries fail, systemd-resolved will synthesize an answer for the "
> "third query."
Looks all OK to me.
> Man page: systemd.resource-control.5
> Issue: Missing closing bracket after link to Control Groups version 1
Fixed.
> Man page: systemd-sysext.8
> Issue: In systemd-portabled.service(8): Portable Services Documentation
Updated.
> Man page: systemd.timer.5
> Issue 1: B<systemd.exec>(1) → B<systemd.exec>(5)
> Issue 2: This section does not (yet?) exist
Fixed.
> Man page: systemd.unit.5
> Issue: that is → that are
Fixed.
> Man page: systemd-veritysetup-generator.8
> Issue: systemd-veritysetup-generator → B<systemd-veritysetup-generator>
>
> "systemd-veritysetup-generator implements B<systemd.generator>(7)\\&."
>
> "systemd-veritysetup-generator understands the following kernel command line "
> "parameters:"
Updated.
> Man page: systemd-volatile-root.service.8
> Issue: initrdyes → Initrd
Fixed.
> Man page: sysupdate.d.5
> Issue: : → \\&. (As above in TRANSFER)
Updated.
> Man page: sysupdate.d.5
> Issue: some → certain
Updated.
> Man page: sysupdate.d.5
> Issue 1: i\\&.e\\& → I\\&.e\\&
Fixed.
> Issue 2: the image → the system
"image" seems correct.
> Man page: tmpfiles.d.5
> Issue: systemd-tmpfiles → B<systemd-tmpfiles>(8)
Updated.
This renames systemd-boot-system-token.service to
systemd-boot-random-seed.service and conditions it less strictly.
Previously, the job of the service was to write a "system token" EFI
variable if it was missing. It called "bootctl --graceful random-seed"
for that. With this change we condition it more liberally: instead of
calling it only when the "system token" EFI variable isn't set, we call
it whenever a boot loader interface compatible boot loader is used. This
means, previously it was invoked on the first boot only: now it is
invoked at every boot.
This doesn#t change the command that is invoked. That's because
previously already the "bootctl --graceful random-seed" did two things:
set the system token if not set yet *and* refresh the random seed in the
ESP. Previousy we put the focus on the former, now we shift the focus to
the latter.
With this simple change we can replace the logic
f913c784ad added, but from a service that
can run much later and doesn't keep the ESP pinned.
In many places we spelled out the phrase behind "initrd" in full, but this
isn't terribly useful. In fact, no "RAM disk" is used, so emphasizing this
is just confusing to the reader. Let's just say "initrd" everywhere, people
understand what this refers to, and that it's in fact an initramfs image.
Also, s/i.e./e.g./ where appropriate.
Also, don't say "in RAM", when in fact it's virtual memory, whose pages
may or may not be loaded in page frames in RAM, and we have no control over
this.
Also, add <filename></filename> and other minor cleanups.
entry.
By default an entry named "Linux Boot Manager" is created (which is the
previous behavior). With the flag the name of the entry can be
controlled, which is useful when installing systemd-boot to multiple ESP
partitions and having uniquely named entries.
Fixes#17044.
When using --root=/--image= the binaries to install/update will be
picked from the directory/image. Add an option to let the caller
choose.
By default (auto) the image is tried first, and if nothing is found
then the host. The other options allow to strictly try the image
or host and ignore the other.
This is based on the output on my laptop, with various manual adjustments.
If people have other types of entries, it'd be useful to add them here. In
particular, some dual-boot entries would be nice.
Strangely enough, having <varlistenetry>s outside of <variablelist> wasn't
causing visual problems. But having two <listitem>s in one <varlistentry>
resulted in the paragraphs running together in the rendered man page.
This makes a bunch of closely related changes:
1. The "entry-token" concept already introduced in kernel-install is now
made use of. i.e. specifically there's a new option --entry-token=
that can be used to explicitly select by which ID to identify boot
loader entries: the machine ID, or some OS ID (ID= or IMAGE_ID= from
/etc/os-release, or even some completely different string. The
selected string is then persisted to /etc/kernel/entry-token, so that
kernel-install can find it there.
2. The --make-machine-id-directory= switch is renamed to
--make-entry-directory= since after all it's not necessarily the
machine ID the dir is named after, but can be any other string as
selected by the entry token.
3. This drops all code to make automatic changes to /etc/machine-info.
Specifically, the KERNEL_INSTALL_MACHINE_ID= field is now more
generically implemented in /etc/kernel/entry-token described above,
hence no need to place it at two locations. And the
KERNEL_INSTALL_LAYOUT= field is not configurable by user switch or
similar anyway in bootctl, but only read from
/etc/kernel/install.conf, and hence copying it from one configuration
file to another appears unnecessary, the second copy is fully
redundant. Note that this just drops writing these fields, they'll
still be honoured when already set.
Now that kernel-install creates the machine-id directory, we don't need to do
this is 'bootctl install', and in fact it's better not to do this since it
might never be necessary. So let's change the default behaviour to 'no'.
I kept support for 'auto' to maintain backwards compatibility, even though the
default was changed. Previous behaviour can be requested by specifying
--make-machine-id-directory=auto.
if /usr/lib/systemd/boot/efi/systemd-bootx64.efi.signed exists
install that instead of /usr/lib/systemd/boot/efi/systemd-bootx64.efi
the idea is that SecureBoot tooling can create the efi.signed file
whenever /usr/lib/systemd/boot/efi/systemd-bootx64.efi from the package
is updated.
Previously, the "bootctl update" logic would refrain from downrgading a
boot loader, but if the boot loader that is installed already matched
the version we could install we'd install it anyway, under the
assumption this was effectively without effect. This behaviour was handy
while developing boot loaders, since installing a modified boot loader
didn't require a version bump.
However, outside of the systems of boot loader developers I don't think
this behaviour makes much sense: we should always emphasize doing
minimal changes to the ESP, hence when an update is supposedly not
necessary, then don't do it. Only update if it really makes sense, to
minimize writes to the ESP. Updating the boot loader is a good thing
after all, but doing so redundantly is not.
Also, downgrade the message about this to LOG_NOTICE, given this
shouldn't be a reason to log.
Finally, exit cleanly in this cases (or if another boot loader is
detected)
The directory might not be created in the ESP but in the extended boot
loader partition, hence don#t claim otherwise.
Also, give a brief reason why the concept exists at all.
Link up machine-id man page.
Follow-up for: 6a3fff75ba
Using `bootctl set-default @current` will set the default loader entry
to the currently booted entry as read from the `LoaderEntrySelected` EFI
variable.
Also `bootctl set-oneshot @current` will set the oneshot loader entry to
the current booted entry.
Correspondingly `@default` and `@oneshot` can be used to read from the
LoaderEntryDefault and LoaderEntryOneshot EFI variables.
bootctl implements three types of operation: those that work with an EFI
boot loader, those which work with any EFI boot loader that implements
the boot loader spec + interface, and finally those specific to sd-boot.
Previously the --help text and the man page mixed them all up. Let's put
them clearly in three separate sections however, to communicate clearly
what is supposed to work everywhere, and what is specific to
systemd-boot or boot loaders implementing the two specs.
This adjusts wording here and there, but is mostly just about
re-ordering existing docs, and putting them under new sections.