When `--json` option is specified, "status" and "list" commands gives
the same information, as originally "list" just gives partial
information of "status" in different format.
The words and cword variables are not localized in all Bash completion
scripts that call _init_completion.
cur, prev, words, and cword (and split if using the -s flag) are all
variables that should be localized in Bash completion scripts before
calling _init_completion (even if they don't otherwise appear in the
calling script). This is done for cur and prev, but not for words and
cword. Letting words and cword remain unlocalized may clobber variables
the user is using for other purposes, which is bad.
This issue can be resolved by declaring words and cword as local
variables.
Resolves#19188.
I don't think it makes sense to complete --legend=yes. It is the default, and
it would be only used very rarely (and then it is easy enough to just remove
the '=no' part from the suggested string).
Add 'reattach' verb to portablectl, and corresponding DBUS interface
to systemd-portabled.
Takes the same parameters as 'attach', but it will do a 'detach' (and
it will refuse to proceed if it cannot be done) first, matching on
the unversioned prefix of the new image. Eg:
portablectl reattach /tmp/foo_2.raw
will cause foo_1.raw to be detached, and foo_2.raw to be attached.
The key difference with a manual 'detach old' plus 'attach new' is that
the running units are not disturbed until after the attach completed,
and if --now is passed they are then restarted.
A 'detach' is not allowed normally if the units are running.
By using a restart-after-deploy method, 'reattach' allows for minimal
interruption of service and also for features that only work on restart
(eg: file descriptor store) to work as intended.
The DBUS interface returns two lists: first the removals from the detach
that were not immediately re-added in the attach, so that the caller
can stop the relevant units, and then the list of additions that are
either new or updates, so that the caller can restart/enable the
relevant units. portablectl already implements this with the existing
--now/--enable switches.
Allow to setup new bind mounts for a service at runtime (via either
DBUS or a new 'systemctl bind' verb) with a new helper that forks into
the unit's mount namespace.
Add a new integration test to cover this.
Useful for zero-downtime addition to services that are running inside
mount namespaces, especially when using RootImage/RootDirectory.
If a service runs with a read-only root, a tmpfs is added on /run
to ensure we can create the airlock directory for incoming mounts
under /run/host/incoming.
As described in #2680, systemctl did ignore inhibitors if it is not
attached to a tty to allow scripts to ignore inhibitors automatically.
This pull request preserves this behavior but allows scripts to
explicit check inhibitors if required.
The new parameter '--check-inhibitors=yes' enables this feature.
The old parameter '-i'/'--ignore-inhibitors' was deprecated in favor
of '--check-inhibitors=no', the default behaviour can be specified
with '--check-inhibitors=auto'.
The new parameter is also described in the documentations and shell
completions found here.
unset-environment is completed with variable names in the environment block.
set-environment the same, but suffixed with "=".
import-environment is completed with variable names in the client environment.
Timestamps for unit start/stop are recorded with microsecond granularity,
but status and show truncate to second granularity by default.
Add a --timestamp=pretty|us|utc option to allow including the microseconds
or to use the UTC TZ to all timestamps printed by systemctl.
Apparently both Fedora and suse default to btrfs now, it should hence be
good enough for us too.
This enables a bunch of really nice things for us, most importanly we
can resize home directories freely (i.e. both grow *and* shrink) while
online. It also allows us to add nice subvolume based home directory
snapshotting later on.
Also, whenever we mention the three supported types, alaways mention
them in alphabetical order, which is also our new order of preference.
Since cryptsetup 2.3.0 a new API to verify dm-verity volumes by a
pkcs7 signature, with the public key in the kernel keyring,
is available. Use it if libcryptsetup supports it.
Hiding the first column, which may contain bullet circles, with --no-legend
is undocumented and potentially unexpected. On the other hand, not printing
bullet circles with --plain is documented so hiding the column with that
switch is sensible.
The combination "--full --no-legend --no-pager --plain" is appropriate for
automated processing of systemctl output.
Add shortcuts to enable and start, or disable and stop, portable
services with a single portablectl command.
Allow to pass a filter on detach, as it's necessary to call
GetImageMetadata to get the unit names associated with an image.
Fixes#10232
v2:
- if RestartKillSignal= is not specified, fall back to KillSignal=. This is necessary
to preserve backwards compatibility (and keep KillSignal= generally useful).
By default, the available completions are sorted alphabetically, which
is counterproductive in case of syslog priorities. Override the default
behavior using the `nosort` option
The option cursor-file takes a filename as argument. If the file exists and
contains a valid cursor, this is used to start the output after this position.
At the end, the last cursor gets written to the file.
This allows for an easy implementation of a timer that regularly looks in the
journal for some messages.
journalctl --cursor-file err-cursor -b -p err
journalctl --cursor-file audit-cursor -t audit --grep DENIED
Or you might want to walk the journal in steps of 10 messages:
journalctl --cursor-file ./curs -n10 --since=today -t systemd
Also, while we are at it, beef it up, by adding json-seq support (i.e.
https://tools.ietf.org/html/rfc7464). This is particularly useful in
conjunction with jq's --seq switch.
This also unifies __filter_units_by_property() and
__filter_units_by_properties(), and makes completion for 'restart',
'reload' or 'stop' show more candidates.
Usecase is to allow changing the final kill from SIGKILL to SIGQUIT which
should create a core dump useful for debugging why the service didn't stop
with the SIGTERM
Template units lacking DefaultInstance cannot be enabled/disabled or
started/restarted.
By adding DefaultInstance the unit can be enabled/disabled but it
still cannot be started/restarted.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Earlier patch added the current word to the performance critical paths.
Here we add it to every place, for consistency sake.
Suggested-by: Yu Watanabe (yuwata)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Pass the partial name of the unit file to list-unit-files and
list-units. This allows for faster completion, since systemctl does
not need to list all the unit files.
For reference:
- time systemctl list-unit-files -> ~200ms
- time systemctl list-unit-files netctl* -> ~15ms
- time systemctl list-units -> ~5ms
- time systemctl list-units netctl* -> ~5ms
While the list-units time itself is unaffected, now a shorter list is
produced. Thus as we pass it to `systemctl show' (via
__filter_units_by_properties) the execution time will be decreased even
further.
v2: Update list-units hunk in commit message, add quotes around $2*
v3: Remove funky indentation, quote all $cur instances
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
When dealing with a large number of template instances, for example
when launching daemons per VRF, it is hard for operators to correlate
log lines to arguments.
Add a new with-unit mode which, if available, prefixes unit and user
unit names when displaying its log messages instead of the syslog
identifier. It will also use the full timestamp with timezones, like
the short-full mode.
If completion is attempted on an invalid path, busctl might respond with an error.
This shouldn't be seen, introspection is supposed to just fail silently.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Suspend to Hibernate is a new sleep method that invokes suspend
for a predefined period of time before automatically waking up
and hibernating the system.
It's similar to HybridSleep however there isn't a performance
impact on every suspend cycle.
It's intended to use with systems that may have a higher power
drain in their supported suspend states to prevent battery and
data loss over an extended suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
The configuration option was called -Dresolve, but the internal define
was …RESOLVED. This options governs more than just resolved itself, so
let's settle on the version without "d".
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
They’re counterparts to the existing set-log-level and set-log-target
verbs, simply printing the current value to stdout. This makes it
slightly easier to temporarily change the log level and/or target and
then restore the old value(s).
Without this fix:
$ systemctl start <tab>
Display all 135 possibilities? (y or n)
$ __get_startable_units --system | wc -l
224
the number of the suggestions are quite different, as __get_startable_units --system does
not filter already started units. With this fix,
$ systemctl start <tab>
Display all 135 possibilities? (y or n)
$ __get_startable_units --system | wc -l
123
$ __get_template_names --system | wc -l
12
the number of the suggestions matches one the function returns.
For consistency with the other internal functions, it should use the first argument
instead of the global variable $mode.
[zj: add commit message to make it sound like we know what we're doing]
