The only complication here is that Core::Stream::File is not RefCounted
meaning we have to use OwnPtr instead of RefPtr.
Unfortunately we cannot propagate errors as some errors must be caught
and dealt with as the runner can do anything (like stop at any moment
or close pipes).
Without this the runner is waiting for new tests which will never come
and test-test262 is waiting for output which never comes since the
runner is blocked.
Also finish off a comment, and make the variables follow serenity style.
Previously, some integer overflows and truncations were causing parsing
errors for 4K videos, with those fixed it can fully decode 8K video.
This adds a test to ensure that 4K video will continue to be decoded.
Note: There seems to be unexpectedly high memory usage while decoding
them, causing 8K video to require more than a gigabyte of RAM. (!!!)
The relevant RFC section from
https://www.rfc-editor.org/rfc/rfc7932#section-9.2
MSKIPBYTES * 8 bits: MSKIPLEN - 1, where MSKIPLEN is
the number of metadata bytes; this field is
only present if MSKIPBYTES is positive;
otherwise, MSKIPLEN is 0 (if MSKIPBYTES is
greater than 1, and the last byte is all
zeros, then the stream should be rejected as
invalid)
So when skip_bytes is zero we need to break and
re-align bytes.
Added the relevant test case that demonstrates this from:
https://github.com/google/brotli/blob/master/tests/testdata/x.compressed
If the entire string you want to right-trim consists of characters you
want to remove, we previously would incorrectly leave the first
character there.
For example: `trim("aaaaa", "a")` would return "a" instead of "".
We can't use `i >= 0` in the loop since that would fail to detect
underflow, so instead we keep `i` in the range `size .. 1` and then
subtract 1 from it when reading the character.
Added some trim() tests while I was at it. (And to confirm that this was
the issue.)
This test file had #ifdef macros at the top that caused none of the
content to be compiled unless a developer manually wanted to run the
specific benchmarks within. As such, it has become stale. Remove it for
now, if someone wants to restore it in an always-runnable state, we can
restore the specific tests it's trying to benchmark.
Instead of doing anything reasonable, Utf8CodePointIterator returned
invalid code points, for example U+123456. However, many callers of this
iterator assume that a code point is always at most 0x10FFFF.
In fact, this is one of two reasons for the following OSS Fuzz issue:
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=49184
This is probably a very old bug.
In the particular case of URLParser, AK::is_url_code_point got confused:
return /* ... */ || code_point >= 0xA0;
If code_point is a "code point" beyond 0x10FFFF, this violates the
condition given in the preceding comment, but satisfies the given
condition, which eventually causes URLParser to crash.
This commit fixes *only* the erroneous UTF-8 decoding, and does not
fully resolve OSS-Fuzz#49184.
This fixes `combine_hangul_code_points` which would try to combine
a LVT syllable with a trailing consonant, resulting in a wrong
character.
Also added a test for this specific case.
`mkstemps` generates a unique temporary file name from a pattern like
`prefixXXXXXXsuffix` where `prefix` and `suffix` can be any string with
only characters that are valid in a filename. The second parameter is
the length of the suffix.
`mkstemp` is `mkstemps` with suffix length 0, so to avoid code
duplication it calls `mkstemps`. It is unlikely this has any
significant performance impact on SerenityOS.
`generate_unique_filename` now takes the suffix length as a `size_t`.
The original behavior of this function is preserved when specifying a
suffix length of 0. All original uses of this function have been
adapted.
`mkstemps()` was added because it is required by version 4.6.3 of the
ccache port.
Doesn't use them in libc headers so that those don't have to pull in
AK/Platform.h.
AK_COMPILER_GCC is set _only_ for gcc, not for clang too. (__GNUC__ is
defined in clang builds as well.) Using AK_COMPILER_GCC simplifies
things some.
AK_COMPILER_CLANG isn't as much of a win, other than that it's
consistent with AK_COMPILER_GCC.
Some time zones, like "Asia/Shanghai", use a set of DST rules that end
before present day. In these cases, we should fall back to last possible
RULE entry from the TZDB. The time zone compiler published by IANA (zic)
performs the same fallback starting with version 2 of the time zone file
format.
JS::Value stores 48 bit pointers to separately allocated objects in its
payload. On x86-64, canonical addresses have their top 16 bits set to
the same value as bit 47, effectively meaning that the value has to be
sign-extended to get the pointer. AArch64, however, expects the topmost
bits to be all zeros.
This commit gates sign extension behind `#if ARCH(X86_64)`, and adds an
`#error` for unsupported architectures, so that we do not forget to
think about pointer handling when porting to a new architecture.
Fixes#15290FixesSerenityOS/ladybird#56
We were dropping the base URL path components in the resulting URL due
to mistakenly determining the input URL to start with a Windows drive
letter. Fix this, add a spec link, and a test.
The test-case is heavily inspired by:
https://github.com/google/brotli/blob/master/tests/testdata/x.compressed.01
Or in words: A metadata meta-block containing `Y` (which should be
ignored), and then the actual data (a single `Z`). The bug used to skip
one metadata byte too few, and thus read garbage.
Propagate errors in places that are already set up to handle them, like
WebGLRenderingContext and the Tubes demo, and convert other callers
to using MUST.
This caused the m_allocation_enabled_previously member to be technically
uninitialized when the compiler emits the implicit destructor call for
stack allocated classes.
This was pointed out by gcc on lagom builds, no clue how this was flying
under the radar for so long and is not triggering CI.
...`__attribute__((__noreturn__))`
This is more inline with the definition in glibc's version of the file,
and stops clang from complaining about it originally not being declared
as `[[no_return]]`.
Each texture unit now has its own texture transformation matrix stack.
Introduce a new texture unit configuration that is synced when changed.
Because we're no longer passing a silly `Vector` when drawing each
primitive, this results in a slightly improved frames per second :^)
This allows running of test262 (like) tests with any runner. And thus
allows running the full test262 suite on Serenity itself.
The functionality of test-test262 is intentionally limited at first.
It does support:
- Progress updates including the special serenity terminal commands
- Outputting a per-file, to compare against other runs
- Passing any number of parameters to the runner
- Setting the batch size of the amount of tests per runner process
- Outputting a summary of the test results
If a test is supposed to fail during parse or early phase we can stop
after parsing. Because phases in modules are not as clear we don't skip
the other parts for modules.
When running a larger set of tests in Serenity the runner would
otherwise trigger a lot of crash reporters. This would then in turn lead
to memory starvation causes more crashes.
We also protect against recursive assert failures, for example due to
being out of memory.
With this change the runner now compiles and runs on Serenity :^).
Since setitimer is not implemented in Serenity we use alarm which
triggers SIGALRM after the timeout. We also don't use a signal handler
as we are doing things that serenity doesn't like/doesn't allow.
Linux dealt with allocating and writing in a signal handler but it is
undefined, so instead we just let the process die by SIGALRM.
This means we instead of reading the output can detect timeouts by
checking how the process died.
For now this is a lagom only application as it is not compatible with
serenity in its current state.
The only change is that it is released under a different license with
permission from all the authors.
We were consuming all whitespace from the format, but not the input
lexer - that was left to the actual format parsing code. It so happened
that we did not account for whitespace with the conversion specifier
'[', causing whitespace to end up in the output variables.
Fix this by always consuming all whitespace and removing the whitespace
logic from the conversion code.
Currently, LibUnicodeData contains the generated UCD and CLDR data. Move
the UCD data to the main LibUnicode library, and rename LibUnicodeData
to LibLocaleData. This is another prepatory change to migrate to
LibLocale.
The FLAC "spec tests", or rather the test suite by xiph that exercises
weird FLAC features and edge cases, can be found at
https://github.com/ietf-wg-cellar/flac-test-files and is a good
challenge for our FLAC decoder to become more spec compliant. Running
these tests is similar to LibWasm spec tests, you need to pass
INCLUDE_FLAC_SPEC_TESTS to CMake.
As of integrating these tests, 23 out of 63 fail. :yakplus:
