The DevFS along with DevPtsFS give a complete solution for populating
device nodes in /dev. The main purpose of DevFS is to eliminate the
need of device nodes generation when building the system.
Later on, DevFS will assist with exposing disk partition nodes.
This new flag controls two things:
- Whether the kernel will generate core dumps for the process
- Whether the EUID:EGID should own the process's files in /proc
Processes are automatically made non-dumpable when their EUID or EGID is
changed, either via syscalls that specifically modify those ID's, or via
sys$execve(), when a set-uid or set-gid program is executed.
A process can change its own dumpable flag at any time by calling the
new sys$prctl(PR_SET_DUMPABLE) syscall.
Fixes#4504.
This commit gets rid of ELF::Loader entirely since its very ambiguous
purpose was actually to load executables for the kernel, and that is
now handled by the kernel itself.
This patch includes some drive-by cleanup in LibDebug and CrashDaemon
enabled by the fact that we no longer need to keep the ref-counted
ELF::Loader around.
The StorageManagement class has 2 roles:
1. During boot, it should find all storage controllers in the machine,
and then determine what is the boot device.
2. Later on boot, it is a registrar of all storage controllers and
storage devices. Thus, it could be used to show information about these
devices when implemented.
This change allows the user to specify a boot driver other than /dev/hda
and if it's connected in the machine - it will boot.
This new subsystem is somewhat replacing the IDE disk code we had with a
new flexible design.
StorageDevice is a generic class that represent a generic storage
device. It is meant that specific storage hardware will override the
interface. StorageController is a generic class that represent
a storage controller that can be found in a machine.
The IDEController class governs two IDEChannels. An IDEChannel is
responsible to manage the master & slave devices of the channel,
therefore an IDEChannel is an IRQHandler.
Such device is not an IRQHandler by itself, but actually a controller of
many IRQ or MSI devices. The purpose of this class is to manage multiple
sources of interrupts.
For example, a generic ISA IDE controller controls 2 IRQ sources - 14
and 15. So, when we initialize the IDE controller, it will initialize
two IDE channels (also known as PATAChannels) to utilize IRQ 14 and 15,
respectively. NVMe with MSI-X support can theoretically handle up to
2048 interrupts.
When a process crashes, we generate a coredump file and write it in
/tmp/coredumps/.
The coredump file is an ELF file of type ET_CORE.
It contains a segment for every userspace memory region of the process,
and an additional PT_NOTE segment that contains the registers state for
each thread, and a additional data about memory regions
(e.g their name).
This makes the Scheduler a lot leaner by not having to evaluate
block conditions every time it is invoked. Instead evaluate them as
the states change, and unblock threads at that point.
This also implements some more waitid/waitpid/wait features and
behavior. For example, WUNTRACED and WNOWAIT are now supported. And
wait will now not return EINTR when SIGCHLD is delivered at the
same time.
This allows issuing asynchronous requests for devices and waiting
on the completion of the request. The requests can cascade into
multiple sub-requests.
Since IRQs may complete at any time, if the current process is no
longer the same that started the process, we need to swich the
paging context before accessing user buffers.
Change the PATA driver to use this model.
Rework the PS/2 keyboard and mouse drivers to use a common 8042
controller driver. Also, reset and reconfigure the 8042 controller
as they are not guaranteed to be in the state that we expect.
This allows issuing asynchronous requests for devices and waiting
on the completion of the request. The requests can cascade into
multiple sub-requests.
Since IRQs may complete at any time, if the current process is no
longer the same that started the process, we need to swich the
paging context before accessing user buffers.
Change the PATA driver to use this model.
This enables the APIC timer on all CPUs, which means Scheduler::timer_tick
is now called on all CPUs independently. We still don't do anything on
the APs as it instantly crashes due to a number of other problems.
This finally takes care of the kind-of excessive boilerplate code that were the
ctype adapters. On the other hand, I had to link `LibC/ctype.cpp` to the Kernel
(for `AK/JsonParser.cpp` and `AK/Format.cpp`). The previous commit actually makes
sense now: the `string.h` includes in `ctype.{h,cpp}` would require to link more LibC
stuff to the Kernel when it only needs the `_ctype_` array of `ctype.cpp`, and there
wasn't any string stuff used in ctype.
Instead of all this I could have put static derivatives of `is_any_of()` in the
concerned AK files, however that would have meant more boilerplate and workarounds;
so I went for the Kernel approach.
This function is not avaliable in the kernel.
In the future it would be nice to have some sort of <charconv> header
that does this for all integer types and then call it in strtoull and et
cetera.
The difference would be that this function say 'from_chars' would return
an Optional and not just interpret anything invalid as zero.
Since the CPU already does almost all necessary validation steps
for us, we don't really need to attempt to do this. Doing it
ourselves doesn't really work very reliably, because we'd have to
account for other processors modifying virtual memory, and we'd
have to account for e.g. pages not being able to be allocated
due to insufficient resources.
So change the copy_to/from_user (and associated helper functions)
to use the new safe_memcpy, which will return whether it succeeded
or not. The only manual validation step needed (which the CPU
can't perform for us) is making sure the pointers provided by user
mode aren't pointing to kernel mappings.
To make it easier to read/write from/to either kernel or user mode
data add the UserOrKernelBuffer helper class, which will internally
either use copy_from/to_user or directly memcpy, or pass the data
through directly using a temporary buffer on the stack.
Last but not least we need to keep syscall params trivial as we
need to copy them from/to user mode using copy_from/to_user.
The JS tests pointed out that the implementation in DateTime
had an off-by-one in the month when doing the leap year check,
so this change fixes that bug.
This does not add any behaviour change to the processes, but it ties a
TTY to an active process group via TIOCSPGRP, and returns the TTY to the
kernel when all processes in the process group die.
Also makes the TTY keep a link to the original controlling process' parent (for
SIGCHLD) instead of the process itself.
This is racy in userspace and non-racy in kernelspace so let's keep
it in kernelspace.
The behavior change where CLOEXEC is preserved when dup2() is called
with (old_fd == new_fd) was good though, let's keep that.
By having a separate list of constructors for the kernel heap
code, we can properly use constructors without re-running them
after the heap was already initialized. This solves some problems
where values were wiped out because they were overwritten by
running their constructors later in the initialization process.
This syscall allows a parent process to disown a child process, setting
its parent PID to 0.
Unparented processes are automatically reaped by the kernel upon exit,
and no sys$waitid() is required. This will make it much nicer to do
spawn-and-forget which is common in the GUI environment.
This is something I've been meaning to do for a long time, and here we
finally go. This patch moves all sys$foo functions out of Process.cpp
and into files in Kernel/Syscalls/.
It's not exactly one syscall per file (although it could be, but I got
a bit tired of the repetitive work here..)
This makes hacking on individual syscalls a lot less painful since you
don't have to rebuild nearly as much code every time. I'm also hopeful
that this makes it easier to understand individual syscalls. :^)
FileBackedFileSystem is one that's backed by (mounted from) a file, in other
words one that has a "source" of the mount; that doesn't mean it deals in
blocks. The hierarchy now becomes:
* FS
* ProcFS
* DevPtsFS
* TmpFS
* FileBackedFS
* (future) Plan9FS
* BlockBasedFS
* Ext2FS
The SDL port failed to build because the CMake toolchain filed pointed
to the old root. Now the toolchain file assumes that the Root is in
Build/Root.
Additionally, the AK/ and Kernel/ headers need to be installed in the
root too.
And move canonicalized_path() to a static method on LexicalPath.
This is to make it clear that FileSystemPath/canonicalized_path() only
perform *lexical* canonicalization.
This patch adds a MappedROM abstraction to the Kernel VM subsystem.
It's basically the read-only byte buffer equivalent of a TypedMapping.
We use this in the ACPI and MP table parsers to scan for interesting
stuff in low memory instead of doing a bunch of address arithmetic.
Make sure that userspace is always referencing "system" headers in a way
that would build on target :). This means removing the explicit
include_directories of Libraries/LibC in favor of having it export its
headers as SYSTEM. Also remove a redundant include_directories of
Libraries in the 'serenity build' part of the build script. It's already
set at the top.
This causes issues for the Kernel, and for crt0.o. These special cases
are handled individually.
This was supposed to be the foundation for some kind of pre-kernel
environment, but nobody is working on it right now, so let's move
everything back into the kernel and remove all the confusion.
