Also added an option in the run script to force PIO operation mode with
the IDE controller.
In addition, we're no longer limited to PIIX3 and PIIX4 chipsets for DMA
Instead of the big ugly switch statement, build a lookup table using
the syscall enumeration macro.
This greatly simplifies the syscall implementation. :^)
Scheduling priority is now set at the thread level instead of at the
process level.
This is a step towards allowing processes to set different priorities
for threads. There's no userspace API for that yet, since only the main
thread's priority is affected by sched_setparam().
Oops, we were creating these and then throwing them away. They will
get instantiated a bit later, when we bring up the mounts in /etc/fstab
from userspace.
Add text.startup to the .text block, add .ctors as well.
Use them in init.cpp to call global constructors after
gtd and idt init. That way any funky constructors should be ok.
Also defines some Itanium C++ ABI methods that probably shouldn't be,
but without them the linker gets very angry.
If the code ever actually tries to use __dso_handle or call
__cxa_atexit, there's bigger problems with the kernel.
Bit of a hack would be an understatement but hey. It works :)
Also added a script to handle creation of GPT partitioned disk (with
GRUB config file). Block limit will be used to disallow potential access
to other partitions.
This is a freelist allocator with static size classes that works as a
complement to the generic kmalloc(). It's a lot faster than kmalloc()
since allocation just means popping from the freelist.
It's also significantly more compact when there are a lot of objects
smaller than the minimum kmalloc chunk size (32 bytes.)
This patch enables it for the Region and PhysicalPage classes.
In the PhysicalPage (8 bytes) case, it's a huge improvement since we
no longer waste 75% of the storage allocated.
There are also a number of ways this can be improved, so let's keep
working on it going forward.
If we receive an IRQ while the idle task is running, prevent it from
re-halting the CPU after the IRQ handler returns.
Instead have the idle task yield to the scheduler, so we can see if
the IRQ has unblocked something.
By setting up the devices in init() and looping over the registered
network adapters in NetworkTask_main, we can remove the remaining
hard-coded adapter references from the network code.
This also assigns IPs according to the default range supplied by QEMU
in its slirp networking mode.
This implements a very basic VGA device using the information provided
to us by the bootloader in the multiboot header. This allows Serenity to
boot to the desktop on basically any halfway modern system.
The complication is around /proc/sys/ variables, which were attached
to inodes. Now they're their own thing, and the corresponding inodes
are lazily created (as all other ProcFS inodes are) and simply refer
to them by index.
This should probably call out to a login program at some point. Right now
it just puts a root terminal on tty{1,2,3}.
Remember not to leave your Serenity workstation unattended!
serial_debug will output all the kprintf and dbgprintf data to COM1 at
8-N-1 57600 baud. this is particularly useful for debugging the boot
process on live hardware.
Note: it must be the first parameter in the boot cmdline.
The previous implementation of the PIIX3/4 PATA/IDE channel driver only
supported a single drive, as the object model was wrong (the channel
inherits the IRQ, not the disk drive itself). This fixes it by 'attaching'
two `PATADiskDevices` to a `PATAChannel`, which makes more sense.
The reading/writing code is presented as is, which violates the spec
outlined by Seagate in the linked datasheet. That spec is rather old,
so it might not be 100% up to date, though may cause issues on real
hardware, so until we can actually test it, this will suffice.
And use this to return EINTR in various places; some of which we were
not handling properly before.
This might expose a few bugs in userspace, but should be more compatible
with other POSIX systems, and is certainly a little cleaner.
A basic Floppy Disk Controller device driver for any system later than (and including) the IBM AT. The driver is based on the documentation supplied by QEMU, which is the datasheet for the Intel 82078 Floppy Disk controller (found here: https://wiki.qemu.org/images/f/f0/29047403.pdf)
Naturally, floppy disks are a _very_ outdated storage medium, however, as Serenity is a throwback to aesthetic 90s computing, it's a definite must have. Not to mention that there are still a lot of floppy disks around, with countless petabytes of software on them, so it would be nice if people could create images of said disks with serenity.
The code for this is mostly clean. however there are a LOT of values specified in the datasheet, so some of them might be wrong, not to mention that the actual specification itself is rather dirt and seemingly hacked together.
I'm also only supporting 3.5" floppy disks, without PIO polling (DMA only), so if you want anything more/less than 1.44MB HD Floppys, you'll have to do it yourself.
Also add an AudioServer that (right now) doesn't do much.
It tries to open, parse, and play a wav file. In the future, it can do more.
My general thinking here here is that /dev/audio will be "owned" by AudioServer,
and we'll do mixing in software before passing buffers off to the kernel
to play, but we have to start somewhere.
This is obviously more readable. If we ever run into a situation where
ref count churn is actually causing trouble in the future, we can deal with
it then. For now, let's keep it simple. :^)
The IDE Disk Controller driver has been extended to allow the secondary device on the channel to be initialised and used. A test as to whether this is working (for anyone interested) is to modify `init.cpp:87` to `auto dev_hd0 = IDEDiskDevice::create(IdeDiskDevice::DeviceType::SLAVE);`. The kernel will fail to boot, as there is no disk attached to CHANNEL 1's slave. This was born out of the fact that my FAT driver can't be tested as easily without creating a partition on `hda`.
This introduces very basic handling of the kernel command line to choose
the root filesystem at startup. Given that we currently only support a
single IDE hard drive, it's hard-coded to look for `/dev/hda` at the start
of the argument.
If there is nothing following this, or if the parameter is empty,
init_stage2 will try to load the ext2 filesystem from the start of the
device. This is intended to be the default behaviour when running
development builds, as it is faster to set up and doesn't require a
working grub installation.
If `/dev/hda` is followed by a number, init_stage2 will try to read an MBR
partition header from the drive, then load the requested partition. It
will reject non-numeric trailing data, and anything outside of partitions
one through four.
