mirror of
https://github.com/SerenityOS/serenity
synced 2024-09-06 17:06:31 +00:00
Kernel: Remove the RTL8139 PCI network adapter driver
Nobody tests this network card, and the driver has bugs (see the issue https://github.com/SerenityOS/serenity/issues/10198 for more details), so it's almost certain that this happened due to code being rotting when there's simply no testing of it. Essentially this has been determined to be dead-code so this is the most important reason to drop this code. Another good reason to do so is because the RTL8139 only supports Fast Ethernet connections (10/100 Megabits per second), and is considered obsolete even for bare metal setups.
This commit is contained in:
parent
3281050359
commit
5c97c6d874
|
@ -239,7 +239,6 @@ set(KERNEL_SOURCES
|
|||
Net/Intel/E1000ENetworkAdapter.cpp
|
||||
Net/Intel/E1000NetworkAdapter.cpp
|
||||
Net/NE2000/NetworkAdapter.cpp
|
||||
Net/Realtek/RTL8139NetworkAdapter.cpp
|
||||
Net/Realtek/RTL8168NetworkAdapter.cpp
|
||||
Net/IPv4Socket.cpp
|
||||
Net/LocalSocket.cpp
|
||||
|
|
|
@ -271,10 +271,6 @@
|
|||
#cmakedefine01 ROUTING_DEBUG
|
||||
#endif
|
||||
|
||||
#ifndef RTL8139_DEBUG
|
||||
#cmakedefine01 RTL8139_DEBUG
|
||||
#endif
|
||||
|
||||
#ifndef RTL8168_DEBUG
|
||||
#cmakedefine01 RTL8168_DEBUG
|
||||
#endif
|
||||
|
|
|
@ -15,7 +15,6 @@
|
|||
#include <Kernel/Net/LoopbackAdapter.h>
|
||||
#include <Kernel/Net/NE2000/NetworkAdapter.h>
|
||||
#include <Kernel/Net/NetworkingManagement.h>
|
||||
#include <Kernel/Net/Realtek/RTL8139NetworkAdapter.h>
|
||||
#include <Kernel/Net/Realtek/RTL8168NetworkAdapter.h>
|
||||
#include <Kernel/Sections.h>
|
||||
|
||||
|
@ -100,7 +99,6 @@ struct PCINetworkDriverInitializer {
|
|||
|
||||
static constexpr PCINetworkDriverInitializer s_initializers[] = {
|
||||
{ RTL8168NetworkAdapter::probe, RTL8168NetworkAdapter::create },
|
||||
{ RTL8139NetworkAdapter::probe, RTL8139NetworkAdapter::create },
|
||||
{ NE2000NetworkAdapter::probe, NE2000NetworkAdapter::create },
|
||||
{ E1000NetworkAdapter::probe, E1000NetworkAdapter::create },
|
||||
{ E1000ENetworkAdapter::probe, E1000ENetworkAdapter::create },
|
||||
|
|
|
@ -1,406 +0,0 @@
|
|||
/*
|
||||
* Copyright (c) 2018-2021, Andreas Kling <kling@serenityos.org>
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-2-Clause
|
||||
*/
|
||||
|
||||
#include <AK/MACAddress.h>
|
||||
#include <Kernel/Bus/PCI/API.h>
|
||||
#include <Kernel/Debug.h>
|
||||
#include <Kernel/Net/NetworkingManagement.h>
|
||||
#include <Kernel/Net/Realtek/RTL8139NetworkAdapter.h>
|
||||
#include <Kernel/Sections.h>
|
||||
|
||||
namespace Kernel {
|
||||
|
||||
#define REG_MAC 0x00
|
||||
#define REG_MAR0 0x08
|
||||
#define REG_MAR4 0x12
|
||||
#define REG_TXSTATUS0 0x10
|
||||
#define REG_TXADDR0 0x20
|
||||
#define REG_RXBUF 0x30
|
||||
#define REG_COMMAND 0x37
|
||||
#define REG_CAPR 0x38
|
||||
#define REG_IMR 0x3C
|
||||
#define REG_ISR 0x3E
|
||||
#define REG_TXCFG 0x40
|
||||
#define REG_RXCFG 0x44
|
||||
#define REG_MPC 0x4C
|
||||
#define REG_CFG9346 0x50
|
||||
#define REG_CONFIG1 0x52
|
||||
#define REG_MSR 0x58
|
||||
#define REG_BMCR 0x62
|
||||
#define REG_ANLPAR 0x68
|
||||
|
||||
#define TX_STATUS_OWN 0x2000
|
||||
#define TX_STATUS_THRESHOLD_MAX 0x3F0000
|
||||
|
||||
#define COMMAND_RX_EMPTY 0x01
|
||||
#define COMMAND_TX_ENABLE 0x04
|
||||
#define COMMAND_RX_ENABLE 0x08
|
||||
#define COMMAND_RESET 0x10
|
||||
|
||||
#define INT_RXOK 0x01
|
||||
#define INT_RXERR 0x02
|
||||
#define INT_TXOK 0x04
|
||||
#define INT_TXERR 0x08
|
||||
#define INT_RX_BUFFER_OVERFLOW 0x10
|
||||
#define INT_LINK_CHANGE 0x20
|
||||
#define INT_RX_FIFO_OVERFLOW 0x40
|
||||
#define INT_LENGTH_CHANGE 0x2000
|
||||
#define INT_SYSTEM_ERROR 0x8000
|
||||
|
||||
#define CFG9346_NONE 0x00
|
||||
#define CFG9346_EEM0 0x40
|
||||
#define CFG9346_EEM1 0x80
|
||||
|
||||
#define TXCFG_TXRR_ZERO 0x00
|
||||
#define TXCFG_MAX_DMA_16B 0x000
|
||||
#define TXCFG_MAX_DMA_32B 0x100
|
||||
#define TXCFG_MAX_DMA_64B 0x200
|
||||
#define TXCFG_MAX_DMA_128B 0x300
|
||||
#define TXCFG_MAX_DMA_256B 0x400
|
||||
#define TXCFG_MAX_DMA_512B 0x500
|
||||
#define TXCFG_MAX_DMA_1K 0x600
|
||||
#define TXCFG_MAX_DMA_2K 0x700
|
||||
#define TXCFG_IFG11 0x3000000
|
||||
|
||||
#define RXCFG_AAP 0x01
|
||||
#define RXCFG_APM 0x02
|
||||
#define RXCFG_AM 0x04
|
||||
#define RXCFG_AB 0x08
|
||||
#define RXCFG_AR 0x10
|
||||
#define RXCFG_WRAP_INHIBIT 0x80
|
||||
#define RXCFG_MAX_DMA_16B 0x000
|
||||
#define RXCFG_MAX_DMA_32B 0x100
|
||||
#define RXCFG_MAX_DMA_64B 0x200
|
||||
#define RXCFG_MAX_DMA_128B 0x300
|
||||
#define RXCFG_MAX_DMA_256B 0x400
|
||||
#define RXCFG_MAX_DMA_512B 0x500
|
||||
#define RXCFG_MAX_DMA_1K 0x600
|
||||
#define RXCFG_MAX_DMA_UNLIMITED 0x0700
|
||||
#define RXCFG_RBLN_8K 0x0000
|
||||
#define RXCFG_RBLN_16K 0x0800
|
||||
#define RXCFG_RBLN_32K 0x1000
|
||||
#define RXCFG_RBLN_64K 0x1800
|
||||
#define RXCFG_FTH_NONE 0xE000
|
||||
|
||||
#define MSR_LINKB 0x02
|
||||
#define MSR_SPEED_10 0x08
|
||||
#define MSR_RX_FLOW_CONTROL_ENABLE 0x40
|
||||
|
||||
#define BMCR_SPEED 0x2000
|
||||
#define BMCR_AUTO_NEGOTIATE 0x1000
|
||||
#define BMCR_DUPLEX 0x0100
|
||||
|
||||
#define ANLPAR_10FD 0x0040
|
||||
#define ANLPAR_TXFD 0x0100
|
||||
|
||||
#define RX_MULTICAST 0x8000
|
||||
#define RX_PHYSICAL_MATCH 0x4000
|
||||
#define RX_BROADCAST 0x2000
|
||||
#define RX_INVALID_SYMBOL_ERROR 0x20
|
||||
#define RX_RUNT 0x10
|
||||
#define RX_LONG 0x08
|
||||
#define RX_CRC_ERROR 0x04
|
||||
#define RX_FRAME_ALIGNMENT_ERROR 0x02
|
||||
#define RX_OK 0x01
|
||||
|
||||
#define PACKET_SIZE_MAX 0x600
|
||||
#define PACKET_SIZE_MIN 0x16
|
||||
|
||||
#define RX_BUFFER_SIZE 32768
|
||||
#define TX_BUFFER_SIZE PACKET_SIZE_MAX
|
||||
|
||||
UNMAP_AFTER_INIT ErrorOr<bool> RTL8139NetworkAdapter::probe(PCI::DeviceIdentifier const& pci_device_identifier)
|
||||
{
|
||||
constexpr PCI::HardwareID rtl8139_id = { 0x10EC, 0x8139 };
|
||||
return pci_device_identifier.hardware_id() == rtl8139_id;
|
||||
}
|
||||
|
||||
UNMAP_AFTER_INIT ErrorOr<NonnullLockRefPtr<NetworkAdapter>> RTL8139NetworkAdapter::create(PCI::DeviceIdentifier const& pci_device_identifier)
|
||||
{
|
||||
u8 irq = pci_device_identifier.interrupt_line().value();
|
||||
auto rx_buffer = TRY(MM.allocate_contiguous_kernel_region(TRY(Memory::page_round_up(RX_BUFFER_SIZE + PACKET_SIZE_MAX)), "RTL8139 RX"sv, Memory::Region::Access::ReadWrite));
|
||||
auto packet_buffer = TRY(MM.allocate_contiguous_kernel_region(TRY(Memory::page_round_up(PACKET_SIZE_MAX)), "RTL8139 Packet buffer"sv, Memory::Region::Access::ReadWrite));
|
||||
auto interface_name = TRY(NetworkingManagement::generate_interface_name_from_pci_address(pci_device_identifier));
|
||||
auto registers_io_window = TRY(IOWindow::create_for_pci_device_bar(pci_device_identifier, PCI::HeaderType0BaseRegister::BAR0));
|
||||
return TRY(adopt_nonnull_lock_ref_or_enomem(new (nothrow) RTL8139NetworkAdapter(pci_device_identifier.address(), irq, move(rx_buffer), move(packet_buffer), move(registers_io_window), move(interface_name))));
|
||||
}
|
||||
|
||||
UNMAP_AFTER_INIT ErrorOr<void> RTL8139NetworkAdapter::initialize(Badge<NetworkingManagement>)
|
||||
{
|
||||
TRY(m_tx_buffers.try_ensure_capacity(RTL8139_TX_BUFFER_COUNT));
|
||||
|
||||
dmesgln_pci(*this, "Found @ {}", pci_address());
|
||||
|
||||
enable_bus_mastering(pci_address());
|
||||
|
||||
dmesgln_pci(*this, "I/O port base: {}", m_registers_io_window);
|
||||
dmesgln_pci(*this, "Interrupt line: {}", interrupt_number());
|
||||
|
||||
// we add space to account for overhang from the last packet - the rtl8139
|
||||
// can optionally guarantee that packets will be contiguous by
|
||||
// purposefully overrunning the rx buffer
|
||||
dbgln("RTL8139: RX buffer: {}", m_rx_buffer->physical_page(0)->paddr());
|
||||
|
||||
for (int i = 0; i < RTL8139_TX_BUFFER_COUNT; i++) {
|
||||
auto buffer = TRY(MM.allocate_contiguous_kernel_region(TRY(Memory::page_round_up(TX_BUFFER_SIZE)), "RTL8139 TX"sv, Memory::Region::Access::Write | Memory::Region::Access::Read));
|
||||
m_tx_buffers.append(move(buffer));
|
||||
dbgln("RTL8139: TX buffer {}: {}", i, m_tx_buffers[i]->physical_page(0)->paddr());
|
||||
}
|
||||
|
||||
reset();
|
||||
|
||||
read_mac_address();
|
||||
auto const& mac = mac_address();
|
||||
dmesgln_pci(*this, "MAC address: {}", mac.to_string());
|
||||
|
||||
enable_irq();
|
||||
return {};
|
||||
}
|
||||
|
||||
UNMAP_AFTER_INIT RTL8139NetworkAdapter::RTL8139NetworkAdapter(PCI::Address address, u8 irq, NonnullOwnPtr<Memory::Region> rx_buffer, NonnullOwnPtr<Memory::Region> packet_buffer, NonnullOwnPtr<IOWindow> registers_io_window, NonnullOwnPtr<KString> interface_name)
|
||||
: NetworkAdapter(move(interface_name))
|
||||
, PCI::Device(address)
|
||||
, IRQHandler(irq)
|
||||
, m_registers_io_window(move(registers_io_window))
|
||||
, m_rx_buffer(move(rx_buffer))
|
||||
, m_packet_buffer(move(packet_buffer))
|
||||
{
|
||||
}
|
||||
|
||||
UNMAP_AFTER_INIT RTL8139NetworkAdapter::~RTL8139NetworkAdapter() = default;
|
||||
|
||||
bool RTL8139NetworkAdapter::handle_irq(RegisterState const&)
|
||||
{
|
||||
bool was_handled = false;
|
||||
for (;;) {
|
||||
int status = in16(REG_ISR);
|
||||
out16(REG_ISR, status);
|
||||
|
||||
m_entropy_source.add_random_event(status);
|
||||
|
||||
dbgln_if(RTL8139_DEBUG, "RTL8139: handle_irq status={:#04x}", status);
|
||||
|
||||
if ((status & (INT_RXOK | INT_RXERR | INT_TXOK | INT_TXERR | INT_RX_BUFFER_OVERFLOW | INT_LINK_CHANGE | INT_RX_FIFO_OVERFLOW | INT_LENGTH_CHANGE | INT_SYSTEM_ERROR)) == 0)
|
||||
break;
|
||||
|
||||
was_handled = true;
|
||||
if (status & INT_RXOK) {
|
||||
dbgln_if(RTL8139_DEBUG, "RTL8139: RX ready");
|
||||
receive();
|
||||
}
|
||||
if (status & INT_RXERR) {
|
||||
dmesgln_pci(*this, "RX error - resetting device");
|
||||
reset();
|
||||
}
|
||||
if (status & INT_TXOK) {
|
||||
dbgln_if(RTL8139_DEBUG, "RTL8139: TX complete");
|
||||
}
|
||||
if (status & INT_TXERR) {
|
||||
dmesgln_pci(*this, "TX error - resetting device");
|
||||
reset();
|
||||
}
|
||||
if (status & INT_RX_BUFFER_OVERFLOW) {
|
||||
dmesgln_pci(*this, "RX buffer overflow");
|
||||
}
|
||||
if (status & INT_LINK_CHANGE) {
|
||||
m_link_up = (in8(REG_MSR) & MSR_LINKB) == 0;
|
||||
dmesgln_pci(*this, "Link status changed up={}", m_link_up);
|
||||
}
|
||||
if (status & INT_RX_FIFO_OVERFLOW) {
|
||||
dmesgln_pci(*this, "RX FIFO overflow");
|
||||
}
|
||||
if (status & INT_LENGTH_CHANGE) {
|
||||
dmesgln_pci(*this, "Cable length change");
|
||||
}
|
||||
if (status & INT_SYSTEM_ERROR) {
|
||||
dmesgln_pci(*this, "System error - resetting device");
|
||||
reset();
|
||||
}
|
||||
}
|
||||
return was_handled;
|
||||
}
|
||||
|
||||
void RTL8139NetworkAdapter::reset()
|
||||
{
|
||||
m_rx_buffer_offset = 0;
|
||||
m_tx_next_buffer = 0;
|
||||
|
||||
// reset the device to clear out all the buffers and config
|
||||
out8(REG_COMMAND, COMMAND_RESET);
|
||||
while ((in8(REG_COMMAND) & COMMAND_RESET) != 0)
|
||||
;
|
||||
|
||||
// unlock config registers
|
||||
out8(REG_CFG9346, CFG9346_EEM0 | CFG9346_EEM1);
|
||||
// turn on multicast
|
||||
out32(REG_MAR0, 0xffffffff);
|
||||
out32(REG_MAR4, 0xffffffff);
|
||||
// enable rx/tx
|
||||
out8(REG_COMMAND, COMMAND_RX_ENABLE | COMMAND_TX_ENABLE);
|
||||
// device might be in sleep mode, this will take it out
|
||||
out8(REG_CONFIG1, 0);
|
||||
// set up rx buffer
|
||||
out32(REG_RXBUF, m_rx_buffer->physical_page(0)->paddr().get());
|
||||
// reset missed packet counter
|
||||
out8(REG_MPC, 0);
|
||||
// "basic mode control register" options - 100mbit, full duplex, auto
|
||||
// negotiation
|
||||
out16(REG_BMCR, BMCR_SPEED | BMCR_AUTO_NEGOTIATE | BMCR_DUPLEX);
|
||||
// enable flow control
|
||||
out8(REG_MSR, MSR_RX_FLOW_CONTROL_ENABLE);
|
||||
// configure rx: accept physical (MAC) match, multicast, and broadcast,
|
||||
// use the optional contiguous packet feature, the maximum dma transfer
|
||||
// size, a 32k buffer, and no fifo threshold
|
||||
out32(REG_RXCFG, RXCFG_APM | RXCFG_AM | RXCFG_AB | RXCFG_WRAP_INHIBIT | RXCFG_MAX_DMA_UNLIMITED | RXCFG_RBLN_32K | RXCFG_FTH_NONE);
|
||||
// configure tx: default retry count (16), max DMA burst size of 1024
|
||||
// bytes, interframe gap time of the only allowable value. the DMA burst
|
||||
// size is important - silent failures have been observed with 2048 bytes.
|
||||
out32(REG_TXCFG, TXCFG_TXRR_ZERO | TXCFG_MAX_DMA_1K | TXCFG_IFG11);
|
||||
// tell the chip where we want it to DMA from for outgoing packets.
|
||||
for (int i = 0; i < 4; i++)
|
||||
out32(REG_TXADDR0 + (i * 4), m_tx_buffers[i]->physical_page(0)->paddr().get());
|
||||
// re-lock config registers
|
||||
out8(REG_CFG9346, CFG9346_NONE);
|
||||
// enable rx/tx again in case they got turned off (apparently some cards
|
||||
// do this?)
|
||||
out8(REG_COMMAND, COMMAND_RX_ENABLE | COMMAND_TX_ENABLE);
|
||||
|
||||
// choose irqs, then clear any pending
|
||||
out16(REG_IMR, INT_RXOK | INT_RXERR | INT_TXOK | INT_TXERR | INT_RX_BUFFER_OVERFLOW | INT_LINK_CHANGE | INT_RX_FIFO_OVERFLOW | INT_LENGTH_CHANGE | INT_SYSTEM_ERROR);
|
||||
out16(REG_ISR, 0xffff);
|
||||
|
||||
// Set the initial link up status.
|
||||
m_link_up = (in8(REG_MSR) & MSR_LINKB) == 0;
|
||||
}
|
||||
|
||||
UNMAP_AFTER_INIT void RTL8139NetworkAdapter::read_mac_address()
|
||||
{
|
||||
MACAddress mac {};
|
||||
for (int i = 0; i < 6; i++)
|
||||
mac[i] = in8(REG_MAC + i);
|
||||
set_mac_address(mac);
|
||||
}
|
||||
|
||||
void RTL8139NetworkAdapter::send_raw(ReadonlyBytes payload)
|
||||
{
|
||||
dbgln_if(RTL8139_DEBUG, "RTL8139: send_raw length={}", payload.size());
|
||||
|
||||
if (payload.size() > PACKET_SIZE_MAX) {
|
||||
dmesgln_pci(*this, "Packet was too big; discarding");
|
||||
return;
|
||||
}
|
||||
|
||||
int hw_buffer = -1;
|
||||
for (int i = 0; i < RTL8139_TX_BUFFER_COUNT; i++) {
|
||||
int potential_buffer = (m_tx_next_buffer + i) % 4;
|
||||
|
||||
auto status = in32(REG_TXSTATUS0 + (potential_buffer * 4));
|
||||
if (status & TX_STATUS_OWN) {
|
||||
hw_buffer = potential_buffer;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (hw_buffer == -1) {
|
||||
dmesgln_pci(*this, "Hardware buffers full; discarding packet");
|
||||
return;
|
||||
}
|
||||
|
||||
dbgln_if(RTL8139_DEBUG, "RTL8139: Chose buffer {}", hw_buffer);
|
||||
m_tx_next_buffer = (hw_buffer + 1) % 4;
|
||||
|
||||
memcpy(m_tx_buffers[hw_buffer]->vaddr().as_ptr(), payload.data(), payload.size());
|
||||
memset(m_tx_buffers[hw_buffer]->vaddr().as_ptr() + payload.size(), 0, TX_BUFFER_SIZE - payload.size());
|
||||
|
||||
// the rtl8139 will not actually emit packets onto the network if they're
|
||||
// smaller than 64 bytes. the rtl8139 adds a checksum to the end of each
|
||||
// packet, and that checksum is four bytes long, so we pad the packet to
|
||||
// 60 bytes if necessary to make sure the whole thing is large enough.
|
||||
auto length = payload.size();
|
||||
if (length < 60) {
|
||||
dbgln_if(RTL8139_DEBUG, "RTL8139: adjusting payload size from {} to 60", length);
|
||||
length = 60;
|
||||
}
|
||||
|
||||
out32(REG_TXSTATUS0 + (hw_buffer * 4), length);
|
||||
}
|
||||
|
||||
void RTL8139NetworkAdapter::receive()
|
||||
{
|
||||
auto* start_of_packet = m_rx_buffer->vaddr().as_ptr() + m_rx_buffer_offset;
|
||||
|
||||
u16 status = *(u16 const*)(start_of_packet + 0);
|
||||
u16 length = *(u16 const*)(start_of_packet + 2);
|
||||
|
||||
dbgln_if(RTL8139_DEBUG, "RTL8139: receive, status={:#04x}, length={}, offset={}", status, length, m_rx_buffer_offset);
|
||||
|
||||
if (!(status & RX_OK) || (status & (RX_INVALID_SYMBOL_ERROR | RX_CRC_ERROR | RX_FRAME_ALIGNMENT_ERROR)) || (length >= PACKET_SIZE_MAX) || (length < PACKET_SIZE_MIN)) {
|
||||
dmesgln_pci(*this, "receive got bad packet, status={:#04x}, length={}", status, length);
|
||||
reset();
|
||||
return;
|
||||
}
|
||||
|
||||
// we never have to worry about the packet wrapping around the buffer,
|
||||
// since we set RXCFG_WRAP_INHIBIT, which allows the rtl8139 to write data
|
||||
// past the end of the allotted space.
|
||||
memcpy(m_packet_buffer->vaddr().as_ptr(), (u8 const*)(start_of_packet + 4), length - 4);
|
||||
// let the card know that we've read this data
|
||||
m_rx_buffer_offset = ((m_rx_buffer_offset + length + 4 + 3) & ~3) % RX_BUFFER_SIZE;
|
||||
out16(REG_CAPR, m_rx_buffer_offset - 0x10);
|
||||
m_rx_buffer_offset %= RX_BUFFER_SIZE;
|
||||
|
||||
did_receive({ m_packet_buffer->vaddr().as_ptr(), (size_t)(length - 4) });
|
||||
}
|
||||
|
||||
void RTL8139NetworkAdapter::out8(u16 address, u8 data)
|
||||
{
|
||||
m_registers_io_window->write8(address, data);
|
||||
}
|
||||
|
||||
void RTL8139NetworkAdapter::out16(u16 address, u16 data)
|
||||
{
|
||||
m_registers_io_window->write16(address, data);
|
||||
}
|
||||
|
||||
void RTL8139NetworkAdapter::out32(u16 address, u32 data)
|
||||
{
|
||||
m_registers_io_window->write32(address, data);
|
||||
}
|
||||
|
||||
u8 RTL8139NetworkAdapter::in8(u16 address)
|
||||
{
|
||||
return m_registers_io_window->read8(address);
|
||||
}
|
||||
|
||||
u16 RTL8139NetworkAdapter::in16(u16 address)
|
||||
{
|
||||
return m_registers_io_window->read16(address);
|
||||
}
|
||||
|
||||
u32 RTL8139NetworkAdapter::in32(u16 address)
|
||||
{
|
||||
return m_registers_io_window->read32(address);
|
||||
}
|
||||
|
||||
bool RTL8139NetworkAdapter::link_full_duplex()
|
||||
{
|
||||
// Note: this code assumes auto-negotiation is enabled (which is now always the case) and
|
||||
// bases the duplex state on the link partner advertisement.
|
||||
// If non-auto-negotiation is ever implemented this should be changed.
|
||||
u16 anlpar = in16(REG_ANLPAR);
|
||||
return !!(anlpar & (ANLPAR_TXFD | ANLPAR_10FD));
|
||||
}
|
||||
|
||||
i32 RTL8139NetworkAdapter::link_speed()
|
||||
{
|
||||
if (!link_up())
|
||||
return NetworkAdapter::LINKSPEED_INVALID;
|
||||
|
||||
u16 msr = in16(REG_MSR);
|
||||
return msr & MSR_SPEED_10 ? 10 : 100;
|
||||
}
|
||||
|
||||
}
|
|
@ -1,66 +0,0 @@
|
|||
/*
|
||||
* Copyright (c) 2018-2020, Andreas Kling <kling@serenityos.org>
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-2-Clause
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include <AK/OwnPtr.h>
|
||||
#include <Kernel/Bus/PCI/Access.h>
|
||||
#include <Kernel/Bus/PCI/Device.h>
|
||||
#include <Kernel/IOWindow.h>
|
||||
#include <Kernel/Interrupts/IRQHandler.h>
|
||||
#include <Kernel/Net/NetworkAdapter.h>
|
||||
#include <Kernel/Random.h>
|
||||
|
||||
namespace Kernel {
|
||||
|
||||
#define RTL8139_TX_BUFFER_COUNT 4
|
||||
|
||||
class RTL8139NetworkAdapter final : public NetworkAdapter
|
||||
, public PCI::Device
|
||||
, public IRQHandler {
|
||||
public:
|
||||
static ErrorOr<bool> probe(PCI::DeviceIdentifier const&);
|
||||
static ErrorOr<NonnullLockRefPtr<NetworkAdapter>> create(PCI::DeviceIdentifier const&);
|
||||
virtual ErrorOr<void> initialize(Badge<NetworkingManagement>) override;
|
||||
|
||||
virtual ~RTL8139NetworkAdapter() override;
|
||||
|
||||
virtual void send_raw(ReadonlyBytes) override;
|
||||
virtual bool link_up() override { return m_link_up; }
|
||||
virtual i32 link_speed() override;
|
||||
virtual bool link_full_duplex() override;
|
||||
|
||||
virtual StringView purpose() const override { return class_name(); }
|
||||
virtual StringView device_name() const override { return "RTL8139"sv; }
|
||||
|
||||
private:
|
||||
RTL8139NetworkAdapter(PCI::Address, u8 irq, NonnullOwnPtr<Memory::Region> rx_buffer, NonnullOwnPtr<Memory::Region> packet_buffer, NonnullOwnPtr<IOWindow> registers_io_window, NonnullOwnPtr<KString>);
|
||||
virtual bool handle_irq(RegisterState const&) override;
|
||||
virtual StringView class_name() const override { return "RTL8139NetworkAdapter"sv; }
|
||||
|
||||
void reset();
|
||||
void read_mac_address();
|
||||
|
||||
void receive();
|
||||
|
||||
void out8(u16 address, u8 data);
|
||||
void out16(u16 address, u16 data);
|
||||
void out32(u16 address, u32 data);
|
||||
u8 in8(u16 address);
|
||||
u16 in16(u16 address);
|
||||
u32 in32(u16 address);
|
||||
|
||||
NonnullOwnPtr<IOWindow> m_registers_io_window;
|
||||
u8 m_interrupt_line { 0 };
|
||||
NonnullOwnPtr<Memory::Region> m_rx_buffer;
|
||||
u16 m_rx_buffer_offset { 0 };
|
||||
Vector<OwnPtr<Memory::Region>> m_tx_buffers;
|
||||
u8 m_tx_next_buffer { 0 };
|
||||
NonnullOwnPtr<Memory::Region> m_packet_buffer;
|
||||
bool m_link_up { false };
|
||||
EntropySource m_entropy_source;
|
||||
};
|
||||
}
|
|
@ -158,7 +158,6 @@ set(RESIZE_DEBUG ON)
|
|||
set(RESOURCE_DEBUG ON)
|
||||
set(ROUTING_DEBUG ON)
|
||||
set(RSA_PARSE_DEBUG ON)
|
||||
set(RTL8139_DEBUG ON)
|
||||
set(RTL8168_DEBUG ON)
|
||||
set(SAFE_SYSCALL_DEBUG ON)
|
||||
set(SB16_DEBUG ON)
|
||||
|
|
Loading…
Reference in a new issue