qemu/hw/vexpress.c
Peter Maydell acb9b72240 vexpress, realview: Use pl111, not pl110
The Versatile Express, Realview EB, PBX A9 and PB A8 boards all
use a PL111 for their graphics, not a PL110. Now we model the
PL111, use it on these board models.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2011-08-17 23:01:27 +00:00

225 lines
7.7 KiB
C

/*
* ARM Versatile Express emulation.
*
* Copyright (c) 2010 - 2011 B Labs Ltd.
* Copyright (c) 2011 Linaro Limited
* Written by Bahadir Balban, Amit Mahajan, Peter Maydell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "sysbus.h"
#include "arm-misc.h"
#include "primecell.h"
#include "devices.h"
#include "net.h"
#include "sysemu.h"
#include "boards.h"
#define SMP_BOOT_ADDR 0xe0000000
#define VEXPRESS_BOARD_ID 0x8e0
static struct arm_boot_info vexpress_binfo = {
.smp_loader_start = SMP_BOOT_ADDR,
};
static void vexpress_a9_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
CPUState *env = NULL;
ram_addr_t ram_offset, vram_offset, sram_offset;
DeviceState *dev, *sysctl;
SysBusDevice *busdev;
qemu_irq *irqp;
qemu_irq pic[64];
int n;
qemu_irq cpu_irq[4];
uint32_t proc_id;
uint32_t sys_id;
ram_addr_t low_ram_size, vram_size, sram_size;
if (!cpu_model) {
cpu_model = "cortex-a9";
}
for (n = 0; n < smp_cpus; n++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
irqp = arm_pic_init_cpu(env);
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
}
if (ram_size > 0x40000000) {
/* 1GB is the maximum the address space permits */
fprintf(stderr, "vexpress: cannot model more than 1GB RAM\n");
exit(1);
}
ram_offset = qemu_ram_alloc(NULL, "vexpress.highmem", ram_size);
low_ram_size = ram_size;
if (low_ram_size > 0x4000000) {
low_ram_size = 0x4000000;
}
/* RAM is from 0x60000000 upwards. The bottom 64MB of the
* address space should in theory be remappable to various
* things including ROM or RAM; we always map the RAM there.
*/
cpu_register_physical_memory(0x0, low_ram_size, ram_offset | IO_MEM_RAM);
cpu_register_physical_memory(0x60000000, ram_size,
ram_offset | IO_MEM_RAM);
/* 0x1e000000 A9MPCore (SCU) private memory region */
dev = qdev_create(NULL, "a9mpcore_priv");
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
vexpress_binfo.smp_priv_base = 0x1e000000;
sysbus_mmio_map(busdev, 0, vexpress_binfo.smp_priv_base);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
/* Interrupts [42:0] are from the motherboard;
* [47:43] are reserved; [63:48] are daughterboard
* peripherals. Note that some documentation numbers
* external interrupts starting from 32 (because the
* A9MP has internal interrupts 0..31).
*/
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
/* Motherboard peripherals CS7 : 0x10000000 .. 0x10020000 */
sys_id = 0x1190f500;
proc_id = 0x0c000191;
/* 0x10000000 System registers */
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_init_nofail(sysctl);
qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
/* 0x10001000 SP810 system control */
/* 0x10002000 serial bus PCI */
/* 0x10004000 PL041 audio */
dev = sysbus_create_varargs("pl181", 0x10005000, pic[9], pic[10], NULL);
/* Wire up MMC card detect and read-only signals */
qdev_connect_gpio_out(dev, 0,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT));
qdev_connect_gpio_out(dev, 1,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN));
sysbus_create_simple("pl050_keyboard", 0x10006000, pic[12]);
sysbus_create_simple("pl050_mouse", 0x10007000, pic[13]);
sysbus_create_simple("pl011", 0x10009000, pic[5]);
sysbus_create_simple("pl011", 0x1000a000, pic[6]);
sysbus_create_simple("pl011", 0x1000b000, pic[7]);
sysbus_create_simple("pl011", 0x1000c000, pic[8]);
/* 0x1000f000 SP805 WDT */
sysbus_create_simple("sp804", 0x10011000, pic[2]);
sysbus_create_simple("sp804", 0x10012000, pic[3]);
/* 0x10016000 Serial Bus DVI */
sysbus_create_simple("pl031", 0x10017000, pic[4]); /* RTC */
/* 0x1001a000 Compact Flash */
/* 0x1001f000 PL111 CLCD (motherboard) */
/* Daughterboard peripherals : 0x10020000 .. 0x20000000 */
/* 0x10020000 PL111 CLCD (daughterboard) */
sysbus_create_simple("pl111", 0x10020000, pic[44]);
/* 0x10060000 AXI RAM */
/* 0x100e0000 PL341 Dynamic Memory Controller */
/* 0x100e1000 PL354 Static Memory Controller */
/* 0x100e2000 System Configuration Controller */
sysbus_create_simple("sp804", 0x100e4000, pic[48]);
/* 0x100e5000 SP805 Watchdog module */
/* 0x100e6000 BP147 TrustZone Protection Controller */
/* 0x100e9000 PL301 'Fast' AXI matrix */
/* 0x100ea000 PL301 'Slow' AXI matrix */
/* 0x100ec000 TrustZone Address Space Controller */
/* 0x10200000 CoreSight debug APB */
/* 0x1e00a000 PL310 L2 Cache Controller */
/* CS0: NOR0 flash : 0x40000000 .. 0x44000000 */
/* CS4: NOR1 flash : 0x44000000 .. 0x48000000 */
/* CS2: SRAM : 0x48000000 .. 0x4a000000 */
sram_size = 0x2000000;
sram_offset = qemu_ram_alloc(NULL, "vexpress.sram", sram_size);
cpu_register_physical_memory(0x48000000, sram_size,
sram_offset | IO_MEM_RAM);
/* CS3: USB, ethernet, VRAM : 0x4c000000 .. 0x50000000 */
/* 0x4c000000 Video RAM */
vram_size = 0x800000;
vram_offset = qemu_ram_alloc(NULL, "vexpress.vram", vram_size);
cpu_register_physical_memory(0x4c000000, vram_size,
vram_offset | IO_MEM_RAM);
/* 0x4e000000 LAN9118 Ethernet */
if (nd_table[0].vlan) {
lan9118_init(&nd_table[0], 0x4e000000, pic[15]);
}
/* 0x4f000000 ISP1761 USB */
/* ??? Hack to map an additional page of ram for the secondary CPU
startup code. I guess this works on real hardware because the
BootROM happens to be in ROM/flash or in memory that isn't clobbered
until after Linux boots the secondary CPUs. */
ram_offset = qemu_ram_alloc(NULL, "vexpress.hack", 0x1000);
cpu_register_physical_memory(SMP_BOOT_ADDR, 0x1000,
ram_offset | IO_MEM_RAM);
vexpress_binfo.ram_size = ram_size;
vexpress_binfo.kernel_filename = kernel_filename;
vexpress_binfo.kernel_cmdline = kernel_cmdline;
vexpress_binfo.initrd_filename = initrd_filename;
vexpress_binfo.nb_cpus = smp_cpus;
vexpress_binfo.board_id = VEXPRESS_BOARD_ID;
vexpress_binfo.loader_start = 0x60000000;
arm_load_kernel(first_cpu, &vexpress_binfo);
}
static QEMUMachine vexpress_a9_machine = {
.name = "vexpress-a9",
.desc = "ARM Versatile Express for Cortex-A9",
.init = vexpress_a9_init,
.use_scsi = 1,
.max_cpus = 4,
};
static void vexpress_machine_init(void)
{
qemu_register_machine(&vexpress_a9_machine);
}
machine_init(vexpress_machine_init);