qemu/hw/i386/ssdt-pcihp.dsl
Michael S. Tsirkin 8dcf525abc acpi-build: append description for non-hotplug
As reported in
http://article.gmane.org/gmane.comp.emulators.qemu/253987
Mac OSX actually requires describing all occupied slots
in ACPI - even if hotplug isn't enabled.

I didn't expect this so I dropped description of all
non hotpluggable slots from ACPI.
As a result: before
commit 99fd437dee (enable
hotplug for pci bridges), PCI cards show up in the "device tree" of OS X
(System Information). E.g., on MountainLion users have:

Hardware -> PCI Cards:

  Card          Type                 Driver Installed  Slot
 *ethernet      Ethernet Controller  Yes               PCI Slot 2
  pci8086,2934  USB UHC              Yes               PCI Slot 29

  ethernet:
    Type:                 Ethernet Controller
    Driver Installed:     Yes
    MSI:                  No
    Bus:                  PCI
    Slot                  PCI Slot 2
    Vendor ID:            0x8086
    Device ID:            0x100e
    Subsystem Vendor ID:  0x1af4
    Subsystem ID:         0x1100
    Revision ID:          0x0003

Hardware -> Ethernet Cards

  ethernet:
    Type:                 Ethernet Controller
    Bus:                  PCI
    Slot                  PCI Slot 2
    Vendor ID:            0x8086
    Device ID:            0x100e
    Subsystem Vendor ID:  0x1af4
    Subsystem ID:         0x1100
    Revision ID:          0x0003
    BSD name:             en0
    Kext name:            AppleIntel8254XEthernet.kext
    Location:             /System/Library/Extensions/...
    Version:              3.1.1b1

After commit 99fd437dee, users get:

Hardware -> PCI Cards:

  This computer doesn't contain any PCI cards. If you installed PCI
  cards, make sure they're properly installed.

Hardware -> Ethernet Cards

  ethernet:
    Type:                 Ethernet Controller
    Bus:                  PCI
    Vendor ID:            0x8086
    Device ID:            0x100e
    Subsystem Vendor ID:  0x1af4
    Subsystem ID:         0x1100
    Revision ID:          0x0003
    BSD name:             en0
    Kext name:            AppleIntel8254XEthernet.kext
    Location:             /System/Library/Extensions/...
    Version:              3.1.1b1

Ethernet still works, but it's not showing up on the PCI bus, and it
no longer thinks it's plugged in to slot #2, as it used to before the
change.

To fix, append description for all occupied non hotpluggable PCI slots.

One need to be careful when doing this: VGA devices
are now described in SSDT, so we need to drop description from DSDT.
And ISA devices are used in DSDT so drop them from SSDT.

Reported-by: Gabriel L. Somlo <gsomlo@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Also update generated dsdt and pcihp hex dump files.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09 21:09:30 +02:00

101 lines
3.4 KiB
Plaintext

/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
ACPI_EXTRACT_ALL_CODE ssdp_pcihp_aml
DefinitionBlock ("ssdt-pcihp.aml", "SSDT", 0x01, "BXPC", "BXSSDTPCIHP", 0x1)
{
/****************************************************************
* PCI hotplug
****************************************************************/
/* Objects supplied by DSDT */
External(\_SB.PCI0, DeviceObj)
External(\_SB.PCI0.PCEJ, MethodObj)
External(BSEL, IntObj)
Scope(\_SB.PCI0) {
/* Bulk generated PCI hotplug devices */
ACPI_EXTRACT_DEVICE_START ssdt_pcihp_start
ACPI_EXTRACT_DEVICE_END ssdt_pcihp_end
ACPI_EXTRACT_DEVICE_STRING ssdt_pcihp_name
// Extract the offsets of the device name, address dword and the slot
// name byte - we fill them in for each device.
Device(SAA) {
ACPI_EXTRACT_NAME_BYTE_CONST ssdt_pcihp_id
Name(_SUN, 0xAA)
ACPI_EXTRACT_NAME_DWORD_CONST ssdt_pcihp_adr
Name(_ADR, 0xAA0000)
Method(_EJ0, 1) {
PCEJ(BSEL, _SUN)
}
}
ACPI_EXTRACT_DEVICE_START ssdt_pcinohp_start
ACPI_EXTRACT_DEVICE_END ssdt_pcinohp_end
ACPI_EXTRACT_DEVICE_STRING ssdt_pcinohp_name
// Extract the offsets of the device name, address dword and the slot
// name byte - we fill them in for each device.
Device(SBB) {
ACPI_EXTRACT_NAME_DWORD_CONST ssdt_pcinohp_adr
Name(_ADR, 0xAA0000)
}
ACPI_EXTRACT_DEVICE_START ssdt_pcivga_start
ACPI_EXTRACT_DEVICE_END ssdt_pcivga_end
ACPI_EXTRACT_DEVICE_STRING ssdt_pcivga_name
// Extract the offsets of the device name, address dword and the slot
// name byte - we fill them in for each device.
Device(SCC) {
ACPI_EXTRACT_NAME_DWORD_CONST ssdt_pcivga_adr
Name(_ADR, 0xAA0000)
Method(_S1D, 0, NotSerialized) {
Return (0x00)
}
Method(_S2D, 0, NotSerialized) {
Return (0x00)
}
Method(_S3D, 0, NotSerialized) {
Return (0x00)
}
}
ACPI_EXTRACT_DEVICE_START ssdt_pciqxl_start
ACPI_EXTRACT_DEVICE_END ssdt_pciqxl_end
ACPI_EXTRACT_DEVICE_STRING ssdt_pciqxl_name
// Extract the offsets of the device name, address dword and the slot
// name byte - we fill them in for each device.
Device(SDD) {
ACPI_EXTRACT_NAME_DWORD_CONST ssdt_pciqxl_adr
Name(_ADR, 0xAA0000)
Method(_S1D, 0, NotSerialized) {
Return (0x00)
}
Method(_S2D, 0, NotSerialized) {
Return (0x00)
}
Method(_S3D, 0, NotSerialized) {
Return (0x03) // QXL
}
}
}
}