qemu/Makefile
Christoph Hellwig 5c6c3a6c54 raw-posix: add Linux native AIO support
Now that do have a nicer interface to work against we can add Linux native
AIO support.  It's an extremly thing layer just setting up an iocb for
the io_submit system call in the submission path, and registering an
eventfd with the qemu poll handler to do complete the iocbs directly
from there.

This started out based on Anthony's earlier AIO patch, but after
estimated 42,000 rewrites and just as many build system changes
there's not much left of it.

To enable native kernel aio use the aio=native sub-command on the
drive command line.  I have also added an option to qemu-io to
test the aio support without needing a guest.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:30:22 -05:00

369 lines
11 KiB
Makefile

# Makefile for QEMU.
ifneq ($(wildcard config-host.mak),)
# Put the all: rule here so that config-host.mak can contain dependencies.
all: build-all
include config-host.mak
include $(SRC_PATH)/rules.mak
else
config-host.mak:
@echo "Please call configure before running make!"
@exit 1
endif
.PHONY: all clean cscope distclean dvi html info install install-doc \
recurse-all speed tar tarbin test
VPATH=$(SRC_PATH):$(SRC_PATH)/hw
LIBS+=-lz $(LIBS_TOOLS)
ifdef BUILD_DOCS
DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8
else
DOCS=
endif
build-all: $(TOOLS) $(DOCS) recurse-all
config-host.mak: configure
ifneq ($(wildcard config-host.mak),)
@echo $@ is out-of-date, running configure
@sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
endif
SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory)
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
subdir-%:
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
$(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
$(filter %-user,$(SUBDIR_RULES)): libqemu_user.a
ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
romsubdir-%:
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/",)
ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))
recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img
block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o
block-obj-y += nbd.o block.o aio.o aes.o osdep.o
block-obj-$(CONFIG_POSIX) += posix-aio-compat.o
block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
block-nested-y += cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o
block-nested-y += parallels.o nbd.o
block-nested-$(CONFIG_WIN32) += raw-win32.o
block-nested-$(CONFIG_POSIX) += raw-posix.o
block-nested-$(CONFIG_CURL) += curl.o
block-obj-y += $(addprefix block/, $(block-nested-y))
######################################################################
# libqemu_common.a: Target independent part of system emulation. The
# long term path is to suppress *all* target specific code in case of
# system emulation, i.e. a single QEMU executable should support all
# CPUs and machines.
obj-y = $(block-obj-y)
obj-y += readline.o console.o host-utils.o
obj-y += irq.o ptimer.o
obj-y += i2c.o smbus.o smbus_eeprom.o max7310.o max111x.o wm8750.o
obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o twl92230.o
obj-y += tmp105.o lm832x.o eeprom93xx.o tsc2005.o
obj-y += scsi-disk.o cdrom.o
obj-y += scsi-generic.o
obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
obj-y += usb-serial.o usb-net.o
obj-y += sd.o ssi-sd.o
obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
obj-y += bt-hci-csr.o
obj-y += buffered_file.o migration.o migration-tcp.o net.o qemu-sockets.o
obj-y += qemu-char.o aio.o net-checksum.o savevm.o
obj-y += msmouse.o ps2.o
obj-y += qdev.o qdev-properties.o ssi.o
obj-$(CONFIG_BRLAPI) += baum.o
obj-$(CONFIG_WIN32) += tap-win32.o
obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o
audio/audio.o audio/fmodaudio.o: QEMU_CFLAGS += $(FMOD_CFLAGS)
audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
audio-obj-$(CONFIG_SDL) += sdlaudio.o
audio-obj-$(CONFIG_OSS) += ossaudio.o
audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o
audio-obj-$(CONFIG_ALSA) += alsaaudio.o
audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o
audio-obj-$(CONFIG_FMOD) += fmodaudio.o
audio-obj-$(CONFIG_ESD) += esdaudio.o
audio-obj-$(CONFIG_PA) += paaudio.o
audio-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
audio-obj-y += wavcapture.o
obj-y += $(addprefix audio/, $(audio-obj-y))
obj-y += keymaps.o
obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
obj-$(CONFIG_CURSES) += curses.o
obj-y += vnc.o acl.o d3des.o
obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
obj-$(CONFIG_COCOA) += cocoa.o
obj-$(CONFIG_IOTHREAD) += qemu-thread.o
slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o
obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))
# xen backend driver support
obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o
obj-$(CONFIG_XEN) += xen_console.o xenfb.o xen_disk.o xen_nic.o
QEMU_CFLAGS+=$(CURL_CFLAGS)
cocoa.o: cocoa.m
keymaps.o: keymaps.c keymaps.h
sdl_zoom.o: sdl_zoom.c sdl_zoom.h sdl_zoom_template.h
sdl.o: sdl.c keymaps.h sdl_keysym.h sdl_zoom.h
sdl.o audio/sdlaudio.o sdl_zoom.o baum.o: QEMU_CFLAGS += $(SDL_CFLAGS)
acl.o: acl.h acl.c
vnc.h: vnc-tls.h vnc-auth-vencrypt.h vnc-auth-sasl.h keymaps.h
vnc.o: vnc.c vnc.h vnc_keysym.h vnchextile.h d3des.c d3des.h acl.h
vnc.o: QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
vnc-tls.o: vnc-tls.c vnc.h
vnc-auth-vencrypt.o: vnc-auth-vencrypt.c vnc.h
vnc-auth-sasl.o: vnc-auth-sasl.c vnc.h
curses.o: curses.c keymaps.h curses_keys.h
bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS)
libqemu_common.a: $(obj-y)
#######################################################################
# user-obj-y is code used by qemu userspace emulation
user-obj-y = cutils.o cache-utils.o path.o envlist.o host-utils.o
libqemu_user.a: $(user-obj-y)
######################################################################
qemu-img.o: qemu-img-cmds.h
qemu-img$(EXESUF): qemu-img.o qemu-tool.o $(block-obj-y)
qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o $(block-obj-y)
qemu-io$(EXESUF): qemu-io.o qemu-tool.o cmd.o $(block-obj-y)
qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@," GEN $@")
clean:
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~
rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d
rm -f qemu-img-cmds.h
$(MAKE) -C tests clean
for d in $(ALL_SUBDIRS) libhw32 libhw64; do \
$(MAKE) -C $$d $@ || exit 1 ; \
done
distclean: clean
rm -f config-host.mak config-host.h config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi
rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
for d in $(TARGET_DIRS) libhw32 libhw64; do \
rm -rf $$d || exit 1 ; \
done
KEYMAPS=da en-gb et fr fr-ch is lt modifiers no pt-br sv \
ar de en-us fi fr-be hr it lv nl pl ru th \
common de-ch es fo fr-ca hu ja mk nl-be pt sl tr
ifdef INSTALL_BLOBS
BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin ppc_rom.bin \
video.x openbios-sparc32 openbios-sparc64 openbios-ppc \
pxe-ne2k_pci.bin pxe-rtl8139.bin pxe-pcnet.bin pxe-e1000.bin \
bamboo.dtb petalogix-s3adsp1800.dtb \
multiboot.bin
else
BLOBS=
endif
install-doc: $(DOCS)
$(INSTALL_DIR) "$(DESTDIR)$(docdir)"
$(INSTALL_DATA) qemu-doc.html qemu-tech.html "$(DESTDIR)$(docdir)"
ifdef CONFIG_POSIX
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
endif
install: all $(if $(BUILD_DOCS),install-doc)
$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
ifneq ($(TOOLS),)
$(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
endif
ifneq ($(BLOBS),)
$(INSTALL_DIR) "$(DESTDIR)$(datadir)"
set -e; for x in $(BLOBS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
done
endif
$(INSTALL_DIR) "$(DESTDIR)$(datadir)/keymaps"
set -e; for x in $(KEYMAPS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
done
for d in $(TARGET_DIRS); do \
$(MAKE) -C $$d $@ || exit 1 ; \
done
# various test targets
test speed: all
$(MAKE) -C tests $@
.PHONY: TAGS
TAGS:
find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags
cscope:
rm -f ./cscope.*
find . -name "*.[ch]" -print | sed 's,^\./,,' > ./cscope.files
cscope -b
# documentation
%.html: %.texi
$(call quiet-command,texi2html -I=. -monolithic -number $<," GEN $@")
%.info: %.texi
$(call quiet-command,makeinfo -I . $< -o $@," GEN $@")
%.dvi: %.texi
$(call quiet-command,texi2dvi -I . $<," GEN $@")
qemu-options.texi: $(SRC_PATH)/qemu-options.hx
$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
qemu-monitor.texi: $(SRC_PATH)/qemu-monitor.hx
$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
$(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu.pod && \
pod2man --section=1 --center=" " --release=" " qemu.pod > $@, \
" GEN $@")
qemu-img.1: qemu-img.texi qemu-img-cmds.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-img.pod && \
pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@, \
" GEN $@")
qemu-nbd.8: qemu-nbd.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-nbd.pod && \
pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
" GEN $@")
info: qemu-doc.info qemu-tech.info
dvi: qemu-doc.dvi qemu-tech.dvi
html: qemu-doc.html qemu-tech.html
qemu-doc.dvi qemu-doc.html qemu-doc.info: qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-monitor.texi qemu-img-cmds.texi
VERSION ?= $(shell cat VERSION)
FILE = qemu-$(VERSION)
# tar release (use 'make -k tar' on a checkouted tree)
tar:
rm -rf /tmp/$(FILE)
cp -r . /tmp/$(FILE)
cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude .git --exclude .svn
rm -rf /tmp/$(FILE)
# generate a binary distribution
tarbin:
cd / && tar zcvf ~/qemu-$(VERSION)-$(ARCH).tar.gz \
$(bindir)/qemu \
$(bindir)/qemu-system-x86_64 \
$(bindir)/qemu-system-arm \
$(bindir)/qemu-system-cris \
$(bindir)/qemu-system-m68k \
$(bindir)/qemu-system-mips \
$(bindir)/qemu-system-mipsel \
$(bindir)/qemu-system-mips64 \
$(bindir)/qemu-system-mips64el \
$(bindir)/qemu-system-ppc \
$(bindir)/qemu-system-ppcemb \
$(bindir)/qemu-system-ppc64 \
$(bindir)/qemu-system-sh4 \
$(bindir)/qemu-system-sh4eb \
$(bindir)/qemu-system-sparc \
$(bindir)/qemu-i386 \
$(bindir)/qemu-x86_64 \
$(bindir)/qemu-alpha \
$(bindir)/qemu-arm \
$(bindir)/qemu-armeb \
$(bindir)/qemu-cris \
$(bindir)/qemu-m68k \
$(bindir)/qemu-mips \
$(bindir)/qemu-mipsel \
$(bindir)/qemu-ppc \
$(bindir)/qemu-ppc64 \
$(bindir)/qemu-ppc64abi32 \
$(bindir)/qemu-sh4 \
$(bindir)/qemu-sh4eb \
$(bindir)/qemu-sparc \
$(bindir)/qemu-sparc64 \
$(bindir)/qemu-sparc32plus \
$(bindir)/qemu-img \
$(bindir)/qemu-nbd \
$(datadir)/bios.bin \
$(datadir)/vgabios.bin \
$(datadir)/vgabios-cirrus.bin \
$(datadir)/ppc_rom.bin \
$(datadir)/video.x \
$(datadir)/openbios-sparc32 \
$(datadir)/openbios-sparc64 \
$(datadir)/openbios-ppc \
$(datadir)/pxe-ne2k_pci.bin \
$(datadir)/pxe-rtl8139.bin \
$(datadir)/pxe-pcnet.bin \
$(datadir)/pxe-e1000.bin \
$(docdir)/qemu-doc.html \
$(docdir)/qemu-tech.html \
$(mandir)/man1/qemu.1 \
$(mandir)/man1/qemu-img.1 \
$(mandir)/man8/qemu-nbd.8
# Include automatically generated dependency files
-include $(wildcard *.d audio/*.d slirp/*.d block/*.d)