qemu/hw/sparc32_dma.c
Jan Kiszka 8217606e6e Introduce reset notifier order
Add the parameter 'order' to qemu_register_reset and sort callbacks on
registration. On system reset, callbacks with lower order will be
invoked before those with higher order. Update all existing users to the
standard order 0.

Note: At least for x86, the existing users seem to assume that handlers
are called in their registration order. Therefore, the patch preserves
this property. If someone feels bored, (s)he could try to identify this
dependency and express it properly on callback registration.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22 10:50:34 -05:00

266 lines
7.2 KiB
C

/*
* QEMU Sparc32 DMA controller emulation
*
* Copyright (c) 2006 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "hw.h"
#include "sparc32_dma.h"
#include "sun4m.h"
/* debug DMA */
//#define DEBUG_DMA
/*
* This is the DMA controller part of chip STP2000 (Master I/O), also
* produced as NCR89C100. See
* http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt
* and
* http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/DMA2.txt
*/
#ifdef DEBUG_DMA
#define DPRINTF(fmt, ...) \
do { printf("DMA: " fmt , ## __VA_ARGS__); } while (0)
#else
#define DPRINTF(fmt, ...)
#endif
#define DMA_REGS 4
#define DMA_SIZE (4 * sizeof(uint32_t))
/* We need the mask, because one instance of the device is not page
aligned (ledma, start address 0x0010) */
#define DMA_MASK (DMA_SIZE - 1)
#define DMA_VER 0xa0000000
#define DMA_INTR 1
#define DMA_INTREN 0x10
#define DMA_WRITE_MEM 0x100
#define DMA_LOADED 0x04000000
#define DMA_DRAIN_FIFO 0x40
#define DMA_RESET 0x80
typedef struct DMAState DMAState;
struct DMAState {
uint32_t dmaregs[DMA_REGS];
qemu_irq irq;
void *iommu;
qemu_irq dev_reset;
};
/* Note: on sparc, the lance 16 bit bus is swapped */
void ledma_memory_read(void *opaque, target_phys_addr_t addr,
uint8_t *buf, int len, int do_bswap)
{
DMAState *s = opaque;
int i;
DPRINTF("DMA write, direction: %c, addr 0x%8.8x\n",
s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
addr |= s->dmaregs[3];
if (do_bswap) {
sparc_iommu_memory_read(s->iommu, addr, buf, len);
} else {
addr &= ~1;
len &= ~1;
sparc_iommu_memory_read(s->iommu, addr, buf, len);
for(i = 0; i < len; i += 2) {
bswap16s((uint16_t *)(buf + i));
}
}
}
void ledma_memory_write(void *opaque, target_phys_addr_t addr,
uint8_t *buf, int len, int do_bswap)
{
DMAState *s = opaque;
int l, i;
uint16_t tmp_buf[32];
DPRINTF("DMA read, direction: %c, addr 0x%8.8x\n",
s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
addr |= s->dmaregs[3];
if (do_bswap) {
sparc_iommu_memory_write(s->iommu, addr, buf, len);
} else {
addr &= ~1;
len &= ~1;
while (len > 0) {
l = len;
if (l > sizeof(tmp_buf))
l = sizeof(tmp_buf);
for(i = 0; i < l; i += 2) {
tmp_buf[i >> 1] = bswap16(*(uint16_t *)(buf + i));
}
sparc_iommu_memory_write(s->iommu, addr, (uint8_t *)tmp_buf, l);
len -= l;
buf += l;
addr += l;
}
}
}
static void dma_set_irq(void *opaque, int irq, int level)
{
DMAState *s = opaque;
if (level) {
DPRINTF("Raise IRQ\n");
s->dmaregs[0] |= DMA_INTR;
qemu_irq_raise(s->irq);
} else {
s->dmaregs[0] &= ~DMA_INTR;
DPRINTF("Lower IRQ\n");
qemu_irq_lower(s->irq);
}
}
void espdma_memory_read(void *opaque, uint8_t *buf, int len)
{
DMAState *s = opaque;
DPRINTF("DMA read, direction: %c, addr 0x%8.8x\n",
s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
sparc_iommu_memory_read(s->iommu, s->dmaregs[1], buf, len);
s->dmaregs[0] |= DMA_INTR;
s->dmaregs[1] += len;
}
void espdma_memory_write(void *opaque, uint8_t *buf, int len)
{
DMAState *s = opaque;
DPRINTF("DMA write, direction: %c, addr 0x%8.8x\n",
s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
sparc_iommu_memory_write(s->iommu, s->dmaregs[1], buf, len);
s->dmaregs[0] |= DMA_INTR;
s->dmaregs[1] += len;
}
static uint32_t dma_mem_readl(void *opaque, target_phys_addr_t addr)
{
DMAState *s = opaque;
uint32_t saddr;
saddr = (addr & DMA_MASK) >> 2;
DPRINTF("read dmareg " TARGET_FMT_plx ": 0x%8.8x\n", addr,
s->dmaregs[saddr]);
return s->dmaregs[saddr];
}
static void dma_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
{
DMAState *s = opaque;
uint32_t saddr;
saddr = (addr & DMA_MASK) >> 2;
DPRINTF("write dmareg " TARGET_FMT_plx ": 0x%8.8x -> 0x%8.8x\n", addr,
s->dmaregs[saddr], val);
switch (saddr) {
case 0:
if (!(val & DMA_INTREN)) {
DPRINTF("Lower IRQ\n");
qemu_irq_lower(s->irq);
}
if (val & DMA_RESET) {
qemu_irq_raise(s->dev_reset);
qemu_irq_lower(s->dev_reset);
} else if (val & DMA_DRAIN_FIFO) {
val &= ~DMA_DRAIN_FIFO;
} else if (val == 0)
val = DMA_DRAIN_FIFO;
val &= 0x0fffffff;
val |= DMA_VER;
break;
case 1:
s->dmaregs[0] |= DMA_LOADED;
break;
default:
break;
}
s->dmaregs[saddr] = val;
}
static CPUReadMemoryFunc *dma_mem_read[3] = {
NULL,
NULL,
dma_mem_readl,
};
static CPUWriteMemoryFunc *dma_mem_write[3] = {
NULL,
NULL,
dma_mem_writel,
};
static void dma_reset(void *opaque)
{
DMAState *s = opaque;
memset(s->dmaregs, 0, DMA_SIZE);
s->dmaregs[0] = DMA_VER;
}
static void dma_save(QEMUFile *f, void *opaque)
{
DMAState *s = opaque;
unsigned int i;
for (i = 0; i < DMA_REGS; i++)
qemu_put_be32s(f, &s->dmaregs[i]);
}
static int dma_load(QEMUFile *f, void *opaque, int version_id)
{
DMAState *s = opaque;
unsigned int i;
if (version_id != 2)
return -EINVAL;
for (i = 0; i < DMA_REGS; i++)
qemu_get_be32s(f, &s->dmaregs[i]);
return 0;
}
void *sparc32_dma_init(target_phys_addr_t daddr, qemu_irq parent_irq,
void *iommu, qemu_irq **dev_irq, qemu_irq **reset)
{
DMAState *s;
int dma_io_memory;
s = qemu_mallocz(sizeof(DMAState));
s->irq = parent_irq;
s->iommu = iommu;
dma_io_memory = cpu_register_io_memory(0, dma_mem_read, dma_mem_write, s);
cpu_register_physical_memory(daddr, DMA_SIZE, dma_io_memory);
register_savevm("sparc32_dma", daddr, 2, dma_save, dma_load, s);
qemu_register_reset(dma_reset, 0, s);
*dev_irq = qemu_allocate_irqs(dma_set_irq, s, 1);
*reset = &s->dev_reset;
return s;
}