qemu/default-configs
Paolo Bonzini e351b82611 hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance.  Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller.  The device corresponds to the mptsas kernel driver in
Linux.

A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers.  It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.

To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well.  The configuration pages are still based mostly on
VirtualBox's, though not exactly the same.  However, the implementation
is completely different.  The contents of the pages themselves should
not be copyrightable.

Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09 15:45:26 +01:00
..
aarch64-linux-user.mak default-configs/aarch64-linux-user.mak: Remove unused define 2015-11-24 14:12:15 +00:00
aarch64-softmmu.mak arm: Introduce Xilinx ZynqMP SoC 2015-05-18 16:41:09 +01:00
alpha-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
alpha-softmmu.mak pci: Move PCI VGA to pci.mak 2015-02-13 05:46:08 +00:00
arm-linux-user.mak default-configs/: CONFIG_GDBSTUB_XML removed 2013-10-16 18:21:01 +02:00
arm-softmmu.mak bcm2835_mbox: add BCM2835 mailboxes 2016-02-03 14:56:32 +00:00
armeb-linux-user.mak default-configs/: CONFIG_GDBSTUB_XML removed 2013-10-16 18:21:01 +02:00
cris-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
cris-softmmu.mak hw: move NICs to hw/net/, configure via default-configs/ 2013-04-08 18:13:13 +02:00
i386-bsd-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
i386-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
i386-softmmu.mak nvdimm acpi: build ACPI NFIT table 2015-12-22 18:39:20 +02:00
lm32-softmmu.mak configure: opengl overhaul 2015-03-12 15:49:57 +01:00
m68k-linux-user.mak default-configs/: CONFIG_GDBSTUB_XML removed 2013-10-16 18:21:01 +02:00
m68k-softmmu.mak default-configs/: CONFIG_GDBSTUB_XML removed 2013-10-16 18:21:01 +02:00
microblaze-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
microblaze-softmmu.mak hw: move SSI controllers to hw/ssi/, configure via default-configs/ 2013-04-08 18:13:13 +02:00
microblazeel-linux-user.mak microblaze: Correct copy+paste:o in defconfigs 2011-03-01 22:17:52 +01:00
microblazeel-softmmu.mak defconfigs: Piggyback microblazeel on microblaze 2015-04-30 16:05:48 +03:00
mips-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
mips-softmmu.mak mips jazz: compile only in 64 bit 2015-06-11 10:13:29 +01:00
mips64-linux-user.mak linux-user: Add default configs for mips64[el] 2012-02-02 17:51:20 +02:00
mips64-softmmu.mak mips jazz: compile only in 64 bit 2015-06-11 10:13:29 +01:00
mips64el-linux-user.mak linux-user: Add default configs for mips64[el] 2012-02-02 17:51:20 +02:00
mips64el-softmmu.mak mips jazz: compile only in 64 bit 2015-06-11 10:13:29 +01:00
mipsel-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
mipsel-softmmu.mak mips jazz: compile only in 64 bit 2015-06-11 10:13:29 +01:00
mipsn32-linux-user.mak linux-user: Add default-configs for mipsn32[el] 2012-02-02 17:51:20 +02:00
mipsn32el-linux-user.mak linux-user: Add default-configs for mipsn32[el] 2012-02-02 17:51:20 +02:00
moxie-softmmu.mak hw: move MC146818RTC to hw/timer/, configure via default-configs/ 2013-04-08 18:13:13 +02:00
or32-linux-user.mak target-or32: Add linux user support 2012-07-27 21:13:05 +00:00
or32-softmmu.mak target-or32: Add target stubs and QOM cpu 2012-07-27 21:12:55 +00:00
pci.mak hw: Add support for LSI SAS1068 (mptsas) device 2016-02-09 15:45:26 +01:00
ppc-linux-user.mak target-ppc: Enable Building of libdecnumber 2014-06-16 13:24:29 +02:00
ppc-softmmu.mak PPC: Remove duplicate OPENPIC defines in default-configs 2015-03-09 15:00:07 +01:00
ppc64-linux-user.mak target-ppc: Enable Building of libdecnumber 2014-06-16 13:24:29 +02:00
ppc64-softmmu.mak ppc/spapr: Allow VIRTIO_VGA 2015-10-20 09:26:36 +02:00
ppc64abi32-linux-user.mak target-ppc: Enable Building of libdecnumber 2014-06-16 13:24:29 +02:00
ppc64le-linux-user.mak target-ppc: Add a new user mode target for little-endian PPC64. 2014-06-16 13:24:40 +02:00
ppcemb-softmmu.mak PPC: Remove duplicate OPENPIC defines in default-configs 2015-03-09 15:00:07 +01:00
s390x-linux-user.mak s390x: build s390x by default 2011-05-20 17:35:12 +02:00
s390x-softmmu.mak s390x/watchdog: introduce diag288 watchdog device 2015-06-11 17:45:49 +02:00
sh4-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sh4-softmmu.mak default-configs: add SuperIO to SH4 2013-07-25 08:12:28 -05:00
sh4eb-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sh4eb-softmmu.mak default-configs: add SuperIO to SH4 2013-07-25 08:12:28 -05:00
sound.mak audio: Enable all cards 2013-05-03 12:04:49 -05:00
sparc-bsd-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sparc-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sparc-softmmu.mak sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM 2014-02-27 10:01:41 +00:00
sparc32plus-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sparc64-bsd-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sparc64-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
sparc64-softmmu.mak pci: Move PCI VGA to pci.mak 2015-02-13 05:46:08 +00:00
tilegx-linux-user.mak target-tilegx: Add TILE-Gx building files 2015-09-15 07:45:32 -07:00
tricore-softmmu.mak target-tricore: Add initialization for translation and activate target 2014-09-01 14:49:20 +01:00
unicore32-linux-user.mak unicore32: necessary modifications for other files to support unicore32 2011-04-12 18:49:05 +00:00
unicore32-softmmu.mak unicore32-softmmu: Add ps2 support 2012-08-11 09:37:02 +00:00
usb.mak hw/usb: Include USB files only if necessary 2015-03-18 11:50:47 +01:00
x86_64-bsd-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
x86_64-linux-user.mak Add new config-devices.mak for each target 2009-10-08 21:17:10 -05:00
x86_64-softmmu.mak nvdimm acpi: build ACPI NFIT table 2015-12-22 18:39:20 +02:00
xtensa-softmmu.mak xtensa_lx60: add FLASH support 2011-11-02 05:05:52 +04:00
xtensaeb-softmmu.mak xtensa_lx60: add FLASH support 2011-11-02 05:05:52 +04:00