mirror of
https://gitlab.com/qemu-project/qemu
synced 2024-09-06 18:05:37 +00:00
![]() The start_xmit() and e1000_receive_iov() functions implement DMA transfers iterating over a set of descriptors that the guest's e1000 driver prepares: - the TDLEN and RDLEN registers store the total size of the descriptor area, - while the TDH and RDH registers store the offset (in whole tx / rx descriptors) into the area where the transfer is supposed to start. Each time a descriptor is processed, the TDH and RDH register is bumped (as appropriate for the transfer direction). QEMU already contains logic to deal with bogus transfers submitted by the guest: - Normally, the transmit case wants to increase TDH from its initial value to TDT. (TDT is allowed to be numerically smaller than the initial TDH value; wrapping at or above TDLEN bytes to zero is normal.) The failsafe that QEMU currently has here is a check against reaching the original TDH value again -- a complete wraparound, which should never happen. - In the receive case RDH is increased from its initial value until "total_size" bytes have been received; preferably in a single step, or in "s->rxbuf_size" byte steps, if the latter is smaller. However, null RX descriptors are skipped without receiving data, while RDH is incremented just the same. QEMU tries to prevent an infinite loop (processing only null RX descriptors) by detecting whether RDH assumes its original value during the loop. (Again, wrapping from RDLEN to 0 is normal.) What both directions miss is that the guest could program TDLEN and RDLEN so low, and the initial TDH and RDH so high, that these registers will immediately be truncated to zero, and then never reassume their initial values in the loop -- a full wraparound will never occur. The condition that expresses this is: xdh_start >= s->mac_reg[XDLEN] / sizeof(desc) i.e., TDH or RDH start out after the last whole rx or tx descriptor that fits into the TDLEN or RDLEN sized area. This condition could be checked before we enter the loops, but pci_dma_read() / pci_dma_write() knows how to fill in buffers safely for bogus DMA addresses, so we just extend the existing failsafes with the above condition. This is CVE-2016-1981. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Prasad Pandit <ppandit@redhat.com> Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: Jason Wang <jasowang@redhat.com> Cc: qemu-stable@nongnu.org RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1296044 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> |
||
---|---|---|
audio | ||
backends | ||
block | ||
bsd-user | ||
contrib | ||
crypto | ||
default-configs | ||
disas | ||
docs | ||
dtc@65cc4d2748 | ||
fpu | ||
fsdev | ||
gdb-xml | ||
hw | ||
include | ||
io | ||
libdecnumber | ||
linux-headers | ||
linux-user | ||
migration | ||
nbd | ||
net | ||
pc-bios | ||
pixman@87eea99e44 | ||
po | ||
qapi | ||
qga | ||
qobject | ||
qom | ||
replay | ||
roms | ||
scripts | ||
slirp | ||
stubs | ||
target-alpha | ||
target-arm | ||
target-cris | ||
target-i386 | ||
target-lm32 | ||
target-m68k | ||
target-microblaze | ||
target-mips | ||
target-moxie | ||
target-openrisc | ||
target-ppc | ||
target-s390x | ||
target-sh4 | ||
target-sparc | ||
target-tilegx | ||
target-tricore | ||
target-unicore32 | ||
target-xtensa | ||
tcg | ||
tests | ||
trace | ||
ui | ||
util | ||
.dir-locals.el | ||
.exrc | ||
.gitignore | ||
.gitmodules | ||
.mailmap | ||
.travis.yml | ||
accel.c | ||
aio-posix.c | ||
aio-win32.c | ||
arch_init.c | ||
async.c | ||
balloon.c | ||
block.c | ||
blockdev-nbd.c | ||
blockdev.c | ||
blockjob.c | ||
bootdevice.c | ||
bt-host.c | ||
bt-vhci.c | ||
Changelog | ||
CODING_STYLE | ||
configure | ||
COPYING | ||
COPYING.LIB | ||
cpu-exec-common.c | ||
cpu-exec.c | ||
cpus.c | ||
cputlb.c | ||
device-hotplug.c | ||
device_tree.c | ||
disas.c | ||
dma-helpers.c | ||
dump.c | ||
exec.c | ||
gdbstub.c | ||
HACKING | ||
hmp-commands-info.hx | ||
hmp-commands.hx | ||
hmp.c | ||
hmp.h | ||
iohandler.c | ||
ioport.c | ||
iothread.c | ||
kvm-all.c | ||
kvm-stub.c | ||
LICENSE | ||
main-loop.c | ||
MAINTAINERS | ||
Makefile | ||
Makefile.objs | ||
Makefile.target | ||
memory.c | ||
memory_mapping.c | ||
module-common.c | ||
monitor.c | ||
numa.c | ||
os-posix.c | ||
os-win32.c | ||
page_cache.c | ||
qapi-schema.json | ||
qdev-monitor.c | ||
qdict-test-data.txt | ||
qemu-bridge-helper.c | ||
qemu-char.c | ||
qemu-doc.texi | ||
qemu-ga.texi | ||
qemu-img-cmds.hx | ||
qemu-img.c | ||
qemu-img.texi | ||
qemu-io-cmds.c | ||
qemu-io.c | ||
qemu-log.c | ||
qemu-nbd.c | ||
qemu-nbd.texi | ||
qemu-options-wrapper.h | ||
qemu-options.h | ||
qemu-options.hx | ||
qemu-seccomp.c | ||
qemu-tech.texi | ||
qemu-timer.c | ||
qemu.nsi | ||
qemu.sasl | ||
qjson.c | ||
qmp-commands.hx | ||
qmp.c | ||
qtest.c | ||
README | ||
rules.mak | ||
softmmu_template.h | ||
spice-qemu-char.c | ||
tcg-runtime.c | ||
tci.c | ||
thread-pool.c | ||
thunk.c | ||
tpm.c | ||
trace-events | ||
translate-all.c | ||
translate-all.h | ||
translate-common.c | ||
user-exec.c | ||
VERSION | ||
version.rc | ||
vl.c | ||
xen-common-stub.c | ||
xen-common.c | ||
xen-hvm-stub.c | ||
xen-hvm.c | ||
xen-mapcache.c |
QEMU README =========== QEMU is a generic and open source machine & userspace emulator and virtualizer. QEMU is capable of emulating a complete machine in software without any need for hardware virtualization support. By using dynamic translation, it achieves very good performance. QEMU can also integrate with the Xen and KVM hypervisors to provide emulated hardware while allowing the hypervisor to manage the CPU. With hypervisor support, QEMU can achieve near native performance for CPUs. When QEMU emulates CPUs directly it is capable of running operating systems made for one machine (e.g. an ARMv7 board) on a different machine (e.g. an x86_64 PC board). QEMU is also capable of providing userspace API virtualization for Linux and BSD kernel interfaces. This allows binaries compiled against one architecture ABI (e.g. the Linux PPC64 ABI) to be run on a host using a different architecture ABI (e.g. the Linux x86_64 ABI). This does not involve any hardware emulation, simply CPU and syscall emulation. QEMU aims to fit into a variety of use cases. It can be invoked directly by users wishing to have full control over its behaviour and settings. It also aims to facilitate integration into higher level management layers, by providing a stable command line interface and monitor API. It is commonly invoked indirectly via the libvirt library when using open source applications such as oVirt, OpenStack and virt-manager. QEMU as a whole is released under the GNU General Public License, version 2. For full licensing details, consult the LICENSE file. Building ======== QEMU is multi-platform software intended to be buildable on all modern Linux platforms, OS-X, Win32 (via the Mingw64 toolchain) and a variety of other UNIX targets. The simple steps to build QEMU are: mkdir build cd build ../configure make Complete details of the process for building and configuring QEMU for all supported host platforms can be found in the qemu-tech.html file. Additional information can also be found online via the QEMU website: http://qemu-project.org/Hosts/Linux http://qemu-project.org/Hosts/W32 Submitting patches ================== The QEMU source code is maintained under the GIT version control system. git clone git://git.qemu-project.org/qemu.git When submitting patches, the preferred approach is to use 'git format-patch' and/or 'git send-email' to format & send the mail to the qemu-devel@nongnu.org mailing list. All patches submitted must contain a 'Signed-off-by' line from the author. Patches should follow the guidelines set out in the HACKING and CODING_STYLE files. Additional information on submitting patches can be found online via the QEMU website http://qemu-project.org/Contribute/SubmitAPatch http://qemu-project.org/Contribute/TrivialPatches Bug reporting ============= The QEMU project uses Launchpad as its primary upstream bug tracker. Bugs found when running code built from QEMU git or upstream released sources should be reported via: https://bugs.launchpad.net/qemu/ If using QEMU via an operating system vendor pre-built binary package, it is preferable to report bugs to the vendor's own bug tracker first. If the bug is also known to affect latest upstream code, it can also be reported via launchpad. For additional information on bug reporting consult: http://qemu-project.org/Contribute/ReportABug Contact ======= The QEMU community can be contacted in a number of ways, with the two main methods being email and IRC - qemu-devel@nongnu.org http://lists.nongnu.org/mailman/listinfo/qemu-devel - #qemu on irc.oftc.net Information on additional methods of contacting the community can be found online via the QEMU website: http://qemu-project.org/Contribute/StartHere -- End