qemu/hw
Peter Maydell d9bbfea646 QEMU RISC-V Emulation Support (RV64GC, RV32GC)
This release renames the SiFive machines to sifive_e and sifive_u
 to represent the SiFive Everywhere and SiFive Unleashed platforms.
 SiFive has configurable soft-core IP, so it is intended that these
 machines will be extended to enable a variety of SiFive IP blocks.
 The CPU definition infrastructure has been improved and there are
 now vendor CPU modules including the SiFiVe E31, E51, U34 and U54
 cores. The emulation accuracy for the E series has been improved
 by disabling the MMU for the E series. S mode has been disabled on
 cores that only support M mode and U mode. The two Spike machines
 that support two privileged ISA versions have been coalesced into
 one file. This series has Signed-off-by from the core contributors.
 
 *** Known Issues ***
 
 * Disassembler has some checkpatch warnings for the sake of code brevity
 * scripts/qemu-binfmt-conf.sh has checkpatch warnings due to line length
 * PMP (Physical Memory Protection) is as-of-yet unused and needs testing
 
 *** Changelog ***
 
 v8.2
 
 * Rebase
 
 v8.1
 
 * Fix missed case of renaming spike_v1.9 to spike_v1.9.1
 
 v8
 
 * Added linux-user/riscv/target_elf.h during rebase
 * Make resetvec configurable and clear mpp and mie on reset
 * Use SiFive E31, E51, U34 and U54 cores in SiFive machines
 * Define SiFive E31, E51, U34 and U54 cores
 * Refactor CPU core definition in preparation for vendor cores
 * Prevent S or U mode unless S or U extensions are present
 * SiFive E Series cores have no MMU
 * SiFive E Series cores have U mode
 * Make privileged ISA v1.10 implicit in CPU types
 * Remove DRAM_BASE and EXT_IO_BASE as they vary by machine
 * Correctly handle mtvec and stvec alignment with respect to RVC
 * Print more machine mode state in riscv_cpu_dump_state
 * Make riscv_isa_string use compact extension order method
 * Fix bug introduced in v6 RISCV_CPU_TYPE_NAME macro change
 * Parameterize spike v1.9.1 config string
 * Coalesce spike_v1.9.1 and spike_v1.10 machines
 * Rename sifive_e300 to sifive_e, and sifive_u500 to sifive_u
 
 v7
 
 * Make spike_v1.10 the default machine
 * Rename spike_v1.9 to spike_v1.9.1 to match privileged spec version
 * Remove empty target/riscv/trace-events file
 * Monitor ROM 32-bit reset code needs to be target endian
 * Add TARGET_TIOCGPTPEER to linux-user/riscv/termbits.h
 * Add -initrd support to the virt board
 * Fix naming in spike machine interface header
 * Update copyright notice on RISC-V Spike machines
 * Update copyright notice on RISC-V HTIF Console device
 * Change CPU Core and translator to GPLv2+
 * Change RISC-V Disassembler to GPLv2+
 * Change SiFive Test Finisher to GPLv2+
 * Change SiFive CLINT to GPLv2+
 * Change SiFive PRCI to GPLv2+
 * Change SiFive PLIC to GPLv2+
 * Change RISC-V spike machines to GPLv2+
 * Change RISC-V virt machine to GPLv2+
 * Change SiFive E300 machine to GPLv2+
 * Change SiFive U500 machine to GPLv2+
 * Change RISC-V Hart Array to GPLv2+
 * Change RISC-V HTIF device to GPLv2+
 * Change SiFiveUART device to GPLv2+
 
 v6
 
 * Drop IEEE 754-201x minimumNumber/maximumNumber for fmin/fmax
 * Remove some unnecessary commented debug statements
 * Change RISCV_CPU_TYPE_NAME to use riscv-cpu suffix
 * Define all CPU variants for linux-user
 * qemu_log calls require trailing \n
 * Replace PLIC printfs with qemu_log
 * Tear out unused HTIF code and eliminate shouting debug messages
 * Fix illegal instruction when sfence.vma is passed (rs2) arguments
 * Make updates to PTE accessed and dirty bits atomic
 * Only require atomic PTE updates on MTTCG enabled guests
 * Page fault if accessed or dirty bits can't be updated
 * Fix get_physical_address PTE reads and writes on riscv32
 * Remove erroneous comments from the PLIC
 * Default enable MTTCG
 * Make WFI less conservative
 * Unify local interrupt handling
 * Expunge HTIF interrupts
 * Always access mstatus.mip under a lock
 * Don't implement rdtime/rdtimeh in system mode (bbl emulates them)
 * Implement insreth/cycleh for rv32 and always enable user-mode counters
 * Add GDB stub support for reading and writing CSRs
 * Rename ENABLE_CHARDEV #ifdef from HTIF code
 * Replace bad HTIF ELF code with load_elf symbol callback
 * Convert chained if else fault handlers to switch statements
 * Use RISCV exception codes for linux-user page faults
 
 v5
 
 * Implement NaN-boxing for flw, set high order bits to 1
 * Use float_muladd_negate_* flags to floatXX_muladd
 * Use IEEE 754-201x minimumNumber/maximumNumber for fmin/fmax
 * Fix TARGET_NR_syscalls
 * Update linux-user/riscv/syscall_nr.h
 * Fix FENCE.I, needs to terminate translation block
 * Adjust unusual convention for interruptno >= 0
 
 v4
 
 * Add @riscv: since 2.12 to CpuInfoArch
 * Remove misleading little-endian comment from load_kernel
 * Rename cpu-model property to cpu-type
 * Drop some unnecessary inline function attributes
 * Don't allow GDB to set value of x0 register
 * Remove unnecessary empty property lists
 * Add Test Finisher device to implement poweroff in virt machine
 * Implement priv ISA v1.10 trap and sret/mret xPIE/xIE behavior
 * Store fflags data in fp_status
 * Purge runtime users of helper_raise_exception
 * Fix validate_csr
 * Tidy gen_jalr
 * Tidy immediate shifts
 * Add gen_exception_inst_addr_mis
 * Add gen_exception_debug
 * Add gen_exception_illegal
 * Tidy helper_fclass_*
 * Split rounding mode setting to a new function
 * Enforce MSTATUS_FS via TB flags
 * Implement acquire/release barrier semantics
 * Use atomic operations as required
 * Fix FENCE and FENCE_I
 * Remove commented code from spike machines
 * PAGE_WRITE permissions can be set on loads if page is already dirty
 * The result of format conversion on an NaN must be a quiet NaN
 * Add missing process_queued_cpu_work to riscv linux-user
 * Remove float(32|64)_classify from cpu.h
 * Removed nonsensical unions aliasing the same type
 * Use uintN_t instead of uintN_fast_t in fpu_helper.c
 * Use macros for FPU exception values in softfloat_flags_to_riscv
 * Move code to set round mode into set_fp_round_mode function
 * Convert set_fp_exceptions from a macro to an inline function
 * Convert round mode helper into an inline function
 * Make fpu_helper ieee_rm array static const
 * Include cpu_mmu_index in cpu_get_tb_cpu_state flags
 * Eliminate MPRV influence on mmu_index
 * Remove unrecoverable do_unassigned_access function
 * Only update PTE accessed and dirty bits if necessary
 * Remove unnecessary tlb_flush in set_mode as mode is in mmu_idx
 * Remove buggy support for misa writes. misa writes are optional
   and are not implemented in any known hardware
 * Always set PTE read or execute permissions during page walk
 * Reorder helper function declarations to match order in helper.c
 * Remove redundant variable declaration in get_physical_address
 * Remove duplicated code from get_physical_address
 * Use mmu_idx instead of mem_idx in riscv_cpu_get_phys_page_debug
 
 v3
 
 * Fix indentation in PMP and HTIF debug macros
 * Fix disassembler checkpatch open brace '{' on next line errors
 * Fix trailing statements on next line in decode_inst_decompress
 * NOTE: the other checkpatch issues have been reviewed previously
 
 v2
 
 * Remove redundant NULL terminators from disassembler register arrays
 * Change disassembler register name arrays to const
 * Refine disassembler internal function names
 * Update dates in disassembler copyright message
 * Remove #ifdef CONFIG_USER_ONLY version of cpu_has_work
 * Use ULL suffix on 64-bit constants
 * Move riscv_cpu_mmu_index from cpu.h to helper.c
 * Move riscv_cpu_hw_interrupts_pending from cpu.h to helper.c
 * Remove redundant TARGET_HAS_ICE from cpu.h
 * Use qemu_irq instead of void* for irq definition in cpu.h
 * Remove duplicate typedef from struct CPURISCVState
 * Remove redundant g_strdup from cpu_register
 * Remove redundant tlb_flush from riscv_cpu_reset
 * Remove redundant mode calculation from get_physical_address
 * Remove redundant debug mode printf and dcsr comment
 * Remove redundant clearing of MSB for bare physical addresses
 * Use g_assert_not_reached for invalid mode in get_physical_address
 * Use g_assert_not_reached for unreachable checks in get_physical_address
 * Use g_assert_not_reached for unreachable type in raise_mmu_exception
 * Return exception instead of aborting for misaligned fetches
 * Move exception defines from cpu.h to cpu_bits.h
 * Remove redundant breakpoint control definitions from cpu_bits.h
 * Implement riscv_cpu_unassigned_access exception handling
 * Log and raise exceptions for unimplemented CSRs
 * Match Spike HTIF exit behavior - don’t print TEST-PASSED
 * Make frm,fflags,fcsr writes trap when mstatus.FS is clear
 * Use g_assert_not_reached for unreachable invalid mode
 * Make hret,uret,dret generate illegal instructions
 * Move riscv_cpu_dump_state and int/fpr regnames to cpu.c
 * Lift interrupt flag and mask into constants in cpu_bits.h
 * Change trap debugging to use qemu_log_mask LOG_TRACE
 * Change CSR debugging to use qemu_log_mask LOG_TRACE
 * Change PMP debugging to use qemu_log_mask LOG_TRACE
 * Remove commented code from pmp.c
 * Change CpuInfoRISCV qapi schema docs to Since 2.12
 * Change RV feature macro to use target_ulong cast
 * Remove riscv_feature and instead use misa extension flags
 * Make riscv_flush_icache_syscall a no-op
 * Undo checkpatch whitespace fixes in unrelated linux-user code
 * Remove redudant constants and tidy up cpu_bits.h
 * Make helper_fence_i a no-op
 * Move include "exec/cpu-all" to end of cpu.h
 * Rename set_privilege to riscv_set_mode
 * Move redundant forward declaration for cpu_riscv_translate_address
 * Remove TCGV_UNUSED from riscv_translate_init
 * Add comment to pmp.c stating the code is untested and currently unused
 * Use ctz to simplify decoding of PMP NAPOT address ranges
 * Change pmp_is_in_range to use than equal for end addresses
 * Fix off by one error in pmp_update_rule
 * Rearrange PMP_DEBUG so that formatting is compile-time checked
 * Rearrange trap debugging so that formatting is compile-time checked
 * Rearrange PLIC debugging so that formatting is compile-time checked
 * Use qemu_log/qemu_log_mask for HTIF logging and debugging
 * Move exception and interrupt names into cpu.c
 * Add Palmer Dabbelt as a RISC-V Maintainer
 * Rebase against current qemu master branch
 
 v1
 
 * initial version based on forward port from riscv-qemu repository
 
 *** Background ***
 
 "RISC-V is an open, free ISA enabling a new era of processor innovation
 through open standard collaboration. Born in academia and research,
 RISC-V ISA delivers a new level of free, extensible software and
 hardware freedom on architecture, paving the way for the next 50 years
 of computing design and innovation."
 
 The QEMU RISC-V port has been developed and maintained out-of-tree for
 several years by Sagar Karandikar and Bastian Koppelmann. The RISC-V
 Privileged specification has evolved substantially over this period but
 has recently been solidifying. The RISC-V Base ISA has been frozon for
 some time and the Privileged ISA, GCC toolchain and Linux ABI are now
 quite stable. I have recently joined Sagar and Bastian as a RISC-V QEMU
 Maintainer and hope to support upstreaming the port.
 
 There are multiple vendors taping out, preparing to ship, or shipping
 silicon that implements the RISC-V Privileged ISA Version 1.10. There
 are also several RISC-V Soft-IP cores implementing Privileged ISA
 Version 1.10 that run on FPGA such as SiFive's Freedom U500 Platform
 and the U54‑MC RISC-V Core IP, among many more implementations from a
 variety of vendors. See https://riscv.org/ for more details.
 
 RISC-V support was upstreamed in binutils 2.28 and GCC 7.1 in the first
 half of 2016. RISC-V support is now available in LLVM top-of-tree and
 the RISC-V Linux port was accepted into Linux 4.15-rc1 late last year
 and is available in the Linux 4.15 release. GLIBC 2.27 added support
 for the RISC-V ISA running on Linux (requires at least binutils-2.30,
 gcc-7.3.0, and linux-4.15). We believe it is timely to submit the
 RISC-V QEMU port for upstream review with the goal of incorporating
 RISC-V support into the upcoming QEMU 2.12 release.
 
 The RISC-V QEMU port is still under active development, mostly with
 respect to device emulation, the addition of Hypervisor support as
 specified in the RISC-V Draft Privileged ISA Version 1.11, and Vector
 support once the first draft is finalized later this year. We believe
 now is the appropriate time for RISC-V QEMU development to be carried
 out in the main QEMU repository as the code will benefit from more
 rigorous review. The RISC-V QEMU port currently supports all the ISA
 extensions that have been finalized and frozen in the Base ISA.
 
 Blog post about recent additions to RISC-V QEMU: https://goo.gl/fJ4zgk
 
 The RISC-V QEMU wiki: https://github.com/riscv/riscv-qemu/wiki
 
 Instructions for building a busybox+dropbear root image, BBL (Berkeley
 Boot Loader) and linux kernel image for use with the RISC-V QEMU
 'virt' machine: https://github.com/michaeljclark/busybear-linux
 
 *** Overview ***
 
 The RISC-V QEMU port implements the following specifications:
 
 * RISC-V Instruction Set Manual Volume I: User-Level ISA Version 2.2
 * RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.9.1
 * RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.10
 
 The RISC-V QEMU port supports the following instruction set extensions:
 
 * RV32GC with Supervisor-mode and User-mode (RV32IMAFDCSU)
 * RV64GC with Supervisor-mode and User-mode (RV64IMAFDCSU)
 
 The RISC-V QEMU port adds the following targets to QEMU:
 
 * riscv32-softmmu
 * riscv64-softmmu
 * riscv32-linux-user
 * riscv64-linux-user
 
 The RISC-V QEMU port supports the following hardware:
 
 * HTIF Console (Host Target Interface)
 * SiFive CLINT (Core Local Interruptor) for Timer interrupts and IPIs
 * SiFive PLIC (Platform Level Interrupt Controller)
 * SiFive Test (Test Finisher) for exiting simulation
 * SiFive UART, PRCI, AON, PWM, QSPI support is partially implemented
 * VirtIO MMIO (GPEX PCI support will be added in a future patch)
 * Generic 16550A UART emulation using 'hw/char/serial.c'
 * MTTCG and SMP support (PLIC and CLINT) on the 'virt' machine
 
 The RISC-V QEMU full system emulator supports 5 machines:
 
 * 'spike_v1.9.1', CLINT, PLIC, HTIF console, config-string, Priv v1.9.1
 * 'spike_v1.10', CLINT, PLIC, HTIF console, device-tree, Priv v1.10
 * 'sifive_e', CLINT, PLIC, SiFive UART, HiFive1 compat, Priv v1.10
 * 'sifive_u', CLINT, PLIC, SiFive UART, device-tree, Priv v1.10
 * 'virt', CLINT, PLIC, 16550A UART, VirtIO, device-tree, Priv v1.10
 
 This is a list of RISC-V QEMU Port Contributors:
 
 * Alex Suykov
 * Andreas Schwab
 * Antony Pavlov
 * Bastian Koppelmann
 * Bruce Hoult
 * Chih-Min Chao
 * Daire McNamara
 * Darius Rad
 * David Abdurachmanov
 * Hesham Almatary
 * Ivan Griffin
 * Jim Wilson
 * Kito Cheng
 * Michael Clark
 * Palmer Dabbelt
 * Richard Henderson
 * Sagar Karandikar
 * Shea Levy
 * Stefan O'Rear
 
 Notes:
 
 * contributor email addresses available off-list on request.
 * checkpatch has been run on all 23 patches.
 * checkpatch exceptions are noted in patches that have errors.
 * passes "make check" on full build for all targets
 * tested riscv-linux-4.6.2 on 'spike_v1.9.1' machine
 * tested riscv-linux-4.15 on 'spike_v1.10' and 'virt' machines
 * tested SiFive HiFive1 binaries in 'sifive_e' machine
 * tested RV64 on 32-bit i386
 
 This patch series includes the following patches:
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQR8mZMOsXzYugc9Xvpr8dezV+8+TwUCWqGRpAAKCRBr8dezV+8+
 T2mMAJ9ptK/7Bs3lE+Mki/ymlTPqhXtyxACfZkyfQf1mfhcXnB+oTG1RvEtblY8=
 =TJc8
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/riscv/tags/riscv-qemu-upstream-v8.2' into staging

QEMU RISC-V Emulation Support (RV64GC, RV32GC)

This release renames the SiFive machines to sifive_e and sifive_u
to represent the SiFive Everywhere and SiFive Unleashed platforms.
SiFive has configurable soft-core IP, so it is intended that these
machines will be extended to enable a variety of SiFive IP blocks.
The CPU definition infrastructure has been improved and there are
now vendor CPU modules including the SiFiVe E31, E51, U34 and U54
cores. The emulation accuracy for the E series has been improved
by disabling the MMU for the E series. S mode has been disabled on
cores that only support M mode and U mode. The two Spike machines
that support two privileged ISA versions have been coalesced into
one file. This series has Signed-off-by from the core contributors.

*** Known Issues ***

* Disassembler has some checkpatch warnings for the sake of code brevity
* scripts/qemu-binfmt-conf.sh has checkpatch warnings due to line length
* PMP (Physical Memory Protection) is as-of-yet unused and needs testing

*** Changelog ***

v8.2

* Rebase

v8.1

* Fix missed case of renaming spike_v1.9 to spike_v1.9.1

v8

* Added linux-user/riscv/target_elf.h during rebase
* Make resetvec configurable and clear mpp and mie on reset
* Use SiFive E31, E51, U34 and U54 cores in SiFive machines
* Define SiFive E31, E51, U34 and U54 cores
* Refactor CPU core definition in preparation for vendor cores
* Prevent S or U mode unless S or U extensions are present
* SiFive E Series cores have no MMU
* SiFive E Series cores have U mode
* Make privileged ISA v1.10 implicit in CPU types
* Remove DRAM_BASE and EXT_IO_BASE as they vary by machine
* Correctly handle mtvec and stvec alignment with respect to RVC
* Print more machine mode state in riscv_cpu_dump_state
* Make riscv_isa_string use compact extension order method
* Fix bug introduced in v6 RISCV_CPU_TYPE_NAME macro change
* Parameterize spike v1.9.1 config string
* Coalesce spike_v1.9.1 and spike_v1.10 machines
* Rename sifive_e300 to sifive_e, and sifive_u500 to sifive_u

v7

* Make spike_v1.10 the default machine
* Rename spike_v1.9 to spike_v1.9.1 to match privileged spec version
* Remove empty target/riscv/trace-events file
* Monitor ROM 32-bit reset code needs to be target endian
* Add TARGET_TIOCGPTPEER to linux-user/riscv/termbits.h
* Add -initrd support to the virt board
* Fix naming in spike machine interface header
* Update copyright notice on RISC-V Spike machines
* Update copyright notice on RISC-V HTIF Console device
* Change CPU Core and translator to GPLv2+
* Change RISC-V Disassembler to GPLv2+
* Change SiFive Test Finisher to GPLv2+
* Change SiFive CLINT to GPLv2+
* Change SiFive PRCI to GPLv2+
* Change SiFive PLIC to GPLv2+
* Change RISC-V spike machines to GPLv2+
* Change RISC-V virt machine to GPLv2+
* Change SiFive E300 machine to GPLv2+
* Change SiFive U500 machine to GPLv2+
* Change RISC-V Hart Array to GPLv2+
* Change RISC-V HTIF device to GPLv2+
* Change SiFiveUART device to GPLv2+

v6

* Drop IEEE 754-201x minimumNumber/maximumNumber for fmin/fmax
* Remove some unnecessary commented debug statements
* Change RISCV_CPU_TYPE_NAME to use riscv-cpu suffix
* Define all CPU variants for linux-user
* qemu_log calls require trailing \n
* Replace PLIC printfs with qemu_log
* Tear out unused HTIF code and eliminate shouting debug messages
* Fix illegal instruction when sfence.vma is passed (rs2) arguments
* Make updates to PTE accessed and dirty bits atomic
* Only require atomic PTE updates on MTTCG enabled guests
* Page fault if accessed or dirty bits can't be updated
* Fix get_physical_address PTE reads and writes on riscv32
* Remove erroneous comments from the PLIC
* Default enable MTTCG
* Make WFI less conservative
* Unify local interrupt handling
* Expunge HTIF interrupts
* Always access mstatus.mip under a lock
* Don't implement rdtime/rdtimeh in system mode (bbl emulates them)
* Implement insreth/cycleh for rv32 and always enable user-mode counters
* Add GDB stub support for reading and writing CSRs
* Rename ENABLE_CHARDEV #ifdef from HTIF code
* Replace bad HTIF ELF code with load_elf symbol callback
* Convert chained if else fault handlers to switch statements
* Use RISCV exception codes for linux-user page faults

v5

* Implement NaN-boxing for flw, set high order bits to 1
* Use float_muladd_negate_* flags to floatXX_muladd
* Use IEEE 754-201x minimumNumber/maximumNumber for fmin/fmax
* Fix TARGET_NR_syscalls
* Update linux-user/riscv/syscall_nr.h
* Fix FENCE.I, needs to terminate translation block
* Adjust unusual convention for interruptno >= 0

v4

* Add @riscv: since 2.12 to CpuInfoArch
* Remove misleading little-endian comment from load_kernel
* Rename cpu-model property to cpu-type
* Drop some unnecessary inline function attributes
* Don't allow GDB to set value of x0 register
* Remove unnecessary empty property lists
* Add Test Finisher device to implement poweroff in virt machine
* Implement priv ISA v1.10 trap and sret/mret xPIE/xIE behavior
* Store fflags data in fp_status
* Purge runtime users of helper_raise_exception
* Fix validate_csr
* Tidy gen_jalr
* Tidy immediate shifts
* Add gen_exception_inst_addr_mis
* Add gen_exception_debug
* Add gen_exception_illegal
* Tidy helper_fclass_*
* Split rounding mode setting to a new function
* Enforce MSTATUS_FS via TB flags
* Implement acquire/release barrier semantics
* Use atomic operations as required
* Fix FENCE and FENCE_I
* Remove commented code from spike machines
* PAGE_WRITE permissions can be set on loads if page is already dirty
* The result of format conversion on an NaN must be a quiet NaN
* Add missing process_queued_cpu_work to riscv linux-user
* Remove float(32|64)_classify from cpu.h
* Removed nonsensical unions aliasing the same type
* Use uintN_t instead of uintN_fast_t in fpu_helper.c
* Use macros for FPU exception values in softfloat_flags_to_riscv
* Move code to set round mode into set_fp_round_mode function
* Convert set_fp_exceptions from a macro to an inline function
* Convert round mode helper into an inline function
* Make fpu_helper ieee_rm array static const
* Include cpu_mmu_index in cpu_get_tb_cpu_state flags
* Eliminate MPRV influence on mmu_index
* Remove unrecoverable do_unassigned_access function
* Only update PTE accessed and dirty bits if necessary
* Remove unnecessary tlb_flush in set_mode as mode is in mmu_idx
* Remove buggy support for misa writes. misa writes are optional
  and are not implemented in any known hardware
* Always set PTE read or execute permissions during page walk
* Reorder helper function declarations to match order in helper.c
* Remove redundant variable declaration in get_physical_address
* Remove duplicated code from get_physical_address
* Use mmu_idx instead of mem_idx in riscv_cpu_get_phys_page_debug

v3

* Fix indentation in PMP and HTIF debug macros
* Fix disassembler checkpatch open brace '{' on next line errors
* Fix trailing statements on next line in decode_inst_decompress
* NOTE: the other checkpatch issues have been reviewed previously

v2

* Remove redundant NULL terminators from disassembler register arrays
* Change disassembler register name arrays to const
* Refine disassembler internal function names
* Update dates in disassembler copyright message
* Remove #ifdef CONFIG_USER_ONLY version of cpu_has_work
* Use ULL suffix on 64-bit constants
* Move riscv_cpu_mmu_index from cpu.h to helper.c
* Move riscv_cpu_hw_interrupts_pending from cpu.h to helper.c
* Remove redundant TARGET_HAS_ICE from cpu.h
* Use qemu_irq instead of void* for irq definition in cpu.h
* Remove duplicate typedef from struct CPURISCVState
* Remove redundant g_strdup from cpu_register
* Remove redundant tlb_flush from riscv_cpu_reset
* Remove redundant mode calculation from get_physical_address
* Remove redundant debug mode printf and dcsr comment
* Remove redundant clearing of MSB for bare physical addresses
* Use g_assert_not_reached for invalid mode in get_physical_address
* Use g_assert_not_reached for unreachable checks in get_physical_address
* Use g_assert_not_reached for unreachable type in raise_mmu_exception
* Return exception instead of aborting for misaligned fetches
* Move exception defines from cpu.h to cpu_bits.h
* Remove redundant breakpoint control definitions from cpu_bits.h
* Implement riscv_cpu_unassigned_access exception handling
* Log and raise exceptions for unimplemented CSRs
* Match Spike HTIF exit behavior - don’t print TEST-PASSED
* Make frm,fflags,fcsr writes trap when mstatus.FS is clear
* Use g_assert_not_reached for unreachable invalid mode
* Make hret,uret,dret generate illegal instructions
* Move riscv_cpu_dump_state and int/fpr regnames to cpu.c
* Lift interrupt flag and mask into constants in cpu_bits.h
* Change trap debugging to use qemu_log_mask LOG_TRACE
* Change CSR debugging to use qemu_log_mask LOG_TRACE
* Change PMP debugging to use qemu_log_mask LOG_TRACE
* Remove commented code from pmp.c
* Change CpuInfoRISCV qapi schema docs to Since 2.12
* Change RV feature macro to use target_ulong cast
* Remove riscv_feature and instead use misa extension flags
* Make riscv_flush_icache_syscall a no-op
* Undo checkpatch whitespace fixes in unrelated linux-user code
* Remove redudant constants and tidy up cpu_bits.h
* Make helper_fence_i a no-op
* Move include "exec/cpu-all" to end of cpu.h
* Rename set_privilege to riscv_set_mode
* Move redundant forward declaration for cpu_riscv_translate_address
* Remove TCGV_UNUSED from riscv_translate_init
* Add comment to pmp.c stating the code is untested and currently unused
* Use ctz to simplify decoding of PMP NAPOT address ranges
* Change pmp_is_in_range to use than equal for end addresses
* Fix off by one error in pmp_update_rule
* Rearrange PMP_DEBUG so that formatting is compile-time checked
* Rearrange trap debugging so that formatting is compile-time checked
* Rearrange PLIC debugging so that formatting is compile-time checked
* Use qemu_log/qemu_log_mask for HTIF logging and debugging
* Move exception and interrupt names into cpu.c
* Add Palmer Dabbelt as a RISC-V Maintainer
* Rebase against current qemu master branch

v1

* initial version based on forward port from riscv-qemu repository

*** Background ***

"RISC-V is an open, free ISA enabling a new era of processor innovation
through open standard collaboration. Born in academia and research,
RISC-V ISA delivers a new level of free, extensible software and
hardware freedom on architecture, paving the way for the next 50 years
of computing design and innovation."

The QEMU RISC-V port has been developed and maintained out-of-tree for
several years by Sagar Karandikar and Bastian Koppelmann. The RISC-V
Privileged specification has evolved substantially over this period but
has recently been solidifying. The RISC-V Base ISA has been frozon for
some time and the Privileged ISA, GCC toolchain and Linux ABI are now
quite stable. I have recently joined Sagar and Bastian as a RISC-V QEMU
Maintainer and hope to support upstreaming the port.

There are multiple vendors taping out, preparing to ship, or shipping
silicon that implements the RISC-V Privileged ISA Version 1.10. There
are also several RISC-V Soft-IP cores implementing Privileged ISA
Version 1.10 that run on FPGA such as SiFive's Freedom U500 Platform
and the U54‑MC RISC-V Core IP, among many more implementations from a
variety of vendors. See https://riscv.org/ for more details.

RISC-V support was upstreamed in binutils 2.28 and GCC 7.1 in the first
half of 2016. RISC-V support is now available in LLVM top-of-tree and
the RISC-V Linux port was accepted into Linux 4.15-rc1 late last year
and is available in the Linux 4.15 release. GLIBC 2.27 added support
for the RISC-V ISA running on Linux (requires at least binutils-2.30,
gcc-7.3.0, and linux-4.15). We believe it is timely to submit the
RISC-V QEMU port for upstream review with the goal of incorporating
RISC-V support into the upcoming QEMU 2.12 release.

The RISC-V QEMU port is still under active development, mostly with
respect to device emulation, the addition of Hypervisor support as
specified in the RISC-V Draft Privileged ISA Version 1.11, and Vector
support once the first draft is finalized later this year. We believe
now is the appropriate time for RISC-V QEMU development to be carried
out in the main QEMU repository as the code will benefit from more
rigorous review. The RISC-V QEMU port currently supports all the ISA
extensions that have been finalized and frozen in the Base ISA.

Blog post about recent additions to RISC-V QEMU: https://goo.gl/fJ4zgk

The RISC-V QEMU wiki: https://github.com/riscv/riscv-qemu/wiki

Instructions for building a busybox+dropbear root image, BBL (Berkeley
Boot Loader) and linux kernel image for use with the RISC-V QEMU
'virt' machine: https://github.com/michaeljclark/busybear-linux

*** Overview ***

The RISC-V QEMU port implements the following specifications:

* RISC-V Instruction Set Manual Volume I: User-Level ISA Version 2.2
* RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.9.1
* RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.10

The RISC-V QEMU port supports the following instruction set extensions:

* RV32GC with Supervisor-mode and User-mode (RV32IMAFDCSU)
* RV64GC with Supervisor-mode and User-mode (RV64IMAFDCSU)

The RISC-V QEMU port adds the following targets to QEMU:

* riscv32-softmmu
* riscv64-softmmu
* riscv32-linux-user
* riscv64-linux-user

The RISC-V QEMU port supports the following hardware:

* HTIF Console (Host Target Interface)
* SiFive CLINT (Core Local Interruptor) for Timer interrupts and IPIs
* SiFive PLIC (Platform Level Interrupt Controller)
* SiFive Test (Test Finisher) for exiting simulation
* SiFive UART, PRCI, AON, PWM, QSPI support is partially implemented
* VirtIO MMIO (GPEX PCI support will be added in a future patch)
* Generic 16550A UART emulation using 'hw/char/serial.c'
* MTTCG and SMP support (PLIC and CLINT) on the 'virt' machine

The RISC-V QEMU full system emulator supports 5 machines:

* 'spike_v1.9.1', CLINT, PLIC, HTIF console, config-string, Priv v1.9.1
* 'spike_v1.10', CLINT, PLIC, HTIF console, device-tree, Priv v1.10
* 'sifive_e', CLINT, PLIC, SiFive UART, HiFive1 compat, Priv v1.10
* 'sifive_u', CLINT, PLIC, SiFive UART, device-tree, Priv v1.10
* 'virt', CLINT, PLIC, 16550A UART, VirtIO, device-tree, Priv v1.10

This is a list of RISC-V QEMU Port Contributors:

* Alex Suykov
* Andreas Schwab
* Antony Pavlov
* Bastian Koppelmann
* Bruce Hoult
* Chih-Min Chao
* Daire McNamara
* Darius Rad
* David Abdurachmanov
* Hesham Almatary
* Ivan Griffin
* Jim Wilson
* Kito Cheng
* Michael Clark
* Palmer Dabbelt
* Richard Henderson
* Sagar Karandikar
* Shea Levy
* Stefan O'Rear

Notes:

* contributor email addresses available off-list on request.
* checkpatch has been run on all 23 patches.
* checkpatch exceptions are noted in patches that have errors.
* passes "make check" on full build for all targets
* tested riscv-linux-4.6.2 on 'spike_v1.9.1' machine
* tested riscv-linux-4.15 on 'spike_v1.10' and 'virt' machines
* tested SiFive HiFive1 binaries in 'sifive_e' machine
* tested RV64 on 32-bit i386

This patch series includes the following patches:

# gpg: Signature made Thu 08 Mar 2018 19:40:20 GMT
# gpg:                using DSA key 6BF1D7B357EF3E4F
# gpg: Good signature from "Michael Clark <michaeljclark@mac.com>"
# gpg:                 aka "Michael Clark <mjc@sifive.com>"
# gpg:                 aka "Michael Clark <michael@metaparadigm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7C99 930E B17C D8BA 073D  5EFA 6BF1 D7B3 57EF 3E4F

* remotes/riscv/tags/riscv-qemu-upstream-v8.2: (23 commits)
  RISC-V Build Infrastructure
  SiFive Freedom U Series RISC-V Machine
  SiFive Freedom E Series RISC-V Machine
  SiFive RISC-V PRCI Block
  SiFive RISC-V UART Device
  RISC-V VirtIO Machine
  SiFive RISC-V Test Finisher
  RISC-V Spike Machines
  SiFive RISC-V PLIC Block
  SiFive RISC-V CLINT Block
  RISC-V HART Array
  RISC-V HTIF Console
  Add symbol table callback interface to load_elf
  RISC-V Linux User Emulation
  RISC-V Physical Memory Protection
  RISC-V TCG Code Generation
  RISC-V GDB Stub
  RISC-V FPU Support
  RISC-V CPU Helpers
  RISC-V Disassembler
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09 10:58:57 +00:00
..
9pfs 9p: fix leak in synth_name_to_path() 2018-02-19 18:27:32 +01:00
acpi qapi: Empty out qapi-schema.json 2018-03-02 13:45:50 -06:00
adc Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
alpha Merge remote-tracking branch 'origin/master' into HEAD 2018-01-11 22:03:50 +02:00
arm mps2-an505: New board model: MPS2 with AN505 Cortex-M33 FPGA image 2018-03-02 11:03:45 +00:00
audio hw/audio/sb16.c: change dolog() to qemu_log_mask() 2018-02-02 08:19:47 +01:00
block Include less of the generated modular QAPI headers 2018-03-02 13:45:50 -06:00
bt hw/bt: Replace fprintf(stderr, "*\n" with error_report() 2018-01-22 09:51:00 +01:00
char s390x/sclp: clean up sclp masks 2018-03-08 15:49:23 +01:00
core Add symbol table callback interface to load_elf 2018-03-07 08:30:28 +13:00
cpu hw: use "qemu/osdep.h" as first #include in source files 2017-12-18 17:07:02 +03:00
cris cris: use generic cpu_model parsing 2017-10-27 16:03:54 +02:00
display g364fb: fix DirtyBitmapSnapshot leak 2018-03-06 14:00:58 +01:00
dma hw/dma: Replace fprintf(stderr, "*\n" with error_report() 2018-02-06 18:29:09 +01:00
gpio Replace all occurances of __FUNCTION__ with __func__ 2018-01-22 09:46:18 +01:00
hppa hw/hppa: Use qemu_log_mask instead of fprintf to stderr 2018-02-04 14:11:03 -08:00
i2c hw/i2c-ddc: Do not fail writes 2018-03-01 11:05:45 +00:00
i386 multiboot: fprintf(stderr...) -> error_report() 2018-03-07 11:53:37 +01:00
ide Revert "IDE: Do not flush empty CDROM drives" 2018-03-02 18:39:07 +01:00
input adb: add trace-events for monitoring keyboard/mouse during bus enumeration 2018-03-06 13:16:29 +11:00
intc openpic_kvm: drop address_space_to_flatview call 2018-03-06 14:01:27 +01:00
ipack pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices 2017-10-15 05:54:43 +03:00
ipmi qapi: Empty out qapi-schema.json 2018-03-02 13:45:50 -06:00
isa lpc: drop pcie host dependency 2018-02-13 18:25:48 +02:00
lm32 hw/lm32: Replace fprintf(stderr, "*\n" with error_report() 2018-02-06 18:29:26 +01:00
m68k m68k: mcf5208: use generic cpu_model parsing 2017-10-27 16:03:54 +02:00
mem Include less of the generated modular QAPI headers 2018-03-02 13:45:50 -06:00
microblaze xlnx-zynqmp-pmu: Connect the IPI device to the PMU 2018-01-26 11:09:09 +01:00
mips Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
misc misc: don't use hwaddr as a type in trace events 2018-03-06 14:24:30 +00:00
moxie hw/moxie: Replace fprintf(stderr, "*\n" with error_report() 2018-02-06 18:29:26 +01:00
net -----BEGIN PGP SIGNATURE----- 2018-03-05 14:27:24 +00:00
nios2 Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
nvram Move include qemu/option.h from qemu-common.h to actual users 2018-02-09 13:52:16 +01:00
openrisc hw/openrisc: Replace fprintf(stderr, "*\n" with error_report() 2018-02-06 18:29:26 +01:00
pci qapi: Empty out qapi-schema.json 2018-03-02 13:45:50 -06:00
pci-bridge virtio,vhost,pci,pc: features, fixes and cleanups 2018-02-13 16:33:31 +00:00
pci-host virtio,vhost,pci,pc: features, fixes and cleanups 2018-02-13 16:33:31 +00:00
pcmcia hw: Clean up includes 2016-01-29 15:07:25 +00:00
ppc PPC: e500: Fix duplicate kernel load and device tree overlap 2018-03-06 13:16:29 +11:00
rdma hw/rdma: Implementation of PVRDMA device 2018-02-19 13:03:24 +02:00
riscv RISC-V Build Infrastructure 2018-03-07 08:30:28 +13:00
s390x s390x/virtio: Convert virtio-ccw from *_exit to *_unrealize 2018-03-08 17:22:20 +01:00
scsi scsi: Remove automatic creation of SCSI controllers with -drive if=scsi 2018-03-06 14:00:59 +01:00
sd sdcard: simplify SD_SEND_OP_COND (ACMD41) 2018-02-22 15:12:54 +00:00
sh4 pci: Rename root bus initialization functions for clarity 2017-12-05 19:13:45 +02:00
smbios Move include qemu/option.h from qemu-common.h to actual users 2018-02-09 13:52:16 +01:00
sparc hw/sparc/sun4m: Fix implicit creation of "-drive if=scsi" devices 2018-03-08 07:21:54 +00:00
sparc64 Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
ssi xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands 2018-03-01 11:05:44 +00:00
timer qapi: Empty out qapi-schema.json 2018-03-02 13:45:50 -06:00
tpm Merge tpm 2018/03/07 2018-03-08 12:56:39 +00:00
tricore tricore: use generic cpu_model parsing 2017-10-27 16:04:27 +02:00
unicore32 hw/unicore32: restrict hw addr defines to source file 2017-12-18 17:07:02 +03:00
usb usb-mtp: Advertise SendObjectInfo for write support 2018-02-26 12:18:36 +01:00
vfio vfio-ccw: license text should indicate GPL v2 or later 2018-03-08 15:49:23 +01:00
virtio qapi: Empty out qapi-schema.json 2018-03-02 13:45:50 -06:00
watchdog qapi: Empty out qapi-schema.json 2018-03-02 13:45:50 -06:00
xen virtio,vhost,pci,pc: features, fixes and cleanups 2018-02-13 16:33:31 +00:00
xenpv hw/xen*: Replace fprintf(stderr, "*\n" with error_report() 2018-02-06 18:29:46 +01:00
xtensa Move include qemu/option.h from qemu-common.h to actual users 2018-02-09 13:52:16 +01:00
Makefile.objs hw/rdma: Add wrappers and macros 2018-02-19 13:03:24 +02:00