qemu/tests/tcg/Makefile.target
Alex Bennée 3539d84df1 semihosting: move semihosting tests to multiarch
It may be arm-compat-semihosting but more than one architecture uses
it so lets move the tests into the multiarch area. We gate it on the
feature and split the semicall.h header between the arches.

Also clean-up a bit of the Makefile messing about to one common set of
runners.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323165308.15244-6-alex.bennee@linaro.org>
2021-03-24 14:25:03 +00:00

188 lines
5.6 KiB
Makefile

# -*- Mode: makefile -*-
#
# TCG tests
#
# These are complicated by the fact we want to build them for guest
# systems. This requires knowing what guests we are building and which
# ones we have cross-compilers for or docker images with
# cross-compilers.
#
# The tests themselves should be as minimal as possible as
# cross-compilers don't always have a large amount of libraries
# available.
#
# We only include the host build system for SRC_PATH and we don't
# bother with the common rules.mk. We expect the following:
#
# CC - the C compiler command
# EXTRA_CFLAGS - any extra CFLAGS
# BUILD_STATIC - are we building static binaries
#
# By default all tests are statically compiled but some host systems
# may not package static libraries by default. If an external
# cross-compiler can only build dynamic libraries the user might need
# to make extra efforts to ensure ld.so can link at runtime when the
# tests are run.
#
# We also accept SPEED=slow to enable slower running tests
#
# We also expect to be in the tests build dir for the FOO-(linux-user|softmmu).
#
all:
-include ../../../config-host.mak
-include ../config-$(TARGET).mak
ifeq ($(CONFIG_USER_ONLY),y)
-include $(SRC_PATH)/default-configs/targets/$(TARGET).mak
endif
# for including , in command strings
COMMA := ,
quiet-command = $(if $(V),$1,$(if $(2),@printf " %-7s %s\n" $2 $3 && $1, @$1))
# $1 = test name, $2 = cmd, $3 = desc
ifdef CONFIG_USER_ONLY
run-test = $(call quiet-command, timeout $(TIMEOUT) $2 > $1.out,"TEST",$3)
else
run-test = $(call quiet-command, timeout $(TIMEOUT) $2,"TEST",$3)
endif
# $1 = test name, $2 = reference
# to work around the pipe squashing the status we only pipe the result if
# we know it failed and then force failure at the end.
diff-out = $(call quiet-command, diff -q $1.out $2 || \
(diff -u $1.out $2 | head -n 10 && false), \
"DIFF","$1.out with $2")
# $1 = test name, $2 = reason
skip-test = @printf " SKIPPED %s on $(TARGET_NAME) because %s\n" $1 $2
# $1 = test name, $2 = reference
# As above but only diff if reference file exists, otherwise the test
# passes if it managed to complete with a status of zero
conditional-diff-out = \
$(if $(wildcard $2), \
$(call diff-out,$1,$2), \
$(call skip-test,"$1 check","no reference"))
# Tests we are building
TESTS=
# additional tests which may re-use existing binaries
EXTRA_TESTS=
# Start with a blank slate, the build targets get to add stuff first
CFLAGS=
QEMU_CFLAGS=
LDFLAGS=
QEMU_OPTS=
# If TCG debugging is enabled things are a lot slower
ifeq ($(CONFIG_DEBUG_TCG),y)
TIMEOUT=60
else
TIMEOUT=15
endif
ifdef CONFIG_USER_ONLY
# The order we include is important. We include multiarch first and
# then the target. If there are common tests shared between
# sub-targets (e.g. ARM & AArch64) then it is up to
# $(TARGET_NAME)/Makefile.target to include the common parent
# architecture in its VPATH.
-include $(SRC_PATH)/tests/tcg/multiarch/Makefile.target
-include $(SRC_PATH)/tests/tcg/$(TARGET_NAME)/Makefile.target
# Add the common build options
CFLAGS+=-Wall -Werror -O0 -g -fno-strict-aliasing
ifeq ($(BUILD_STATIC),y)
LDFLAGS+=-static
endif
%: %.c
$(CC) $(CFLAGS) $(EXTRA_CFLAGS) $< -o $@ $(LDFLAGS)
else
# For softmmu targets we include a different Makefile fragement as the
# build options for bare programs are usually pretty different. They
# are expected to provide their own build recipes.
-include $(SRC_PATH)/tests/tcg/minilib/Makefile.target
-include $(SRC_PATH)/tests/tcg/multiarch/system/Makefile.softmmu-target
-include $(SRC_PATH)/tests/tcg/$(TARGET_NAME)/Makefile.softmmu-target
endif
all: $(TESTS) $(EXTRA_TESTS)
#
# Test Runners
#
# By default we just run the test with the appropriate QEMU for the
# target. More advanced tests may want to override the runner in their
# specific make rules. Additional runners for the same binary should
# be added to EXTRA_RUNS.
#
RUN_TESTS=$(patsubst %,run-%, $(TESTS))
# If plugins exist also include those in the tests
ifeq ($(CONFIG_PLUGIN),y)
PLUGIN_SRC=$(SRC_PATH)/tests/plugin
PLUGIN_LIB=../../plugin
VPATH+=$(PLUGIN_LIB)
PLUGINS=$(patsubst %.c, lib%.so, $(notdir $(wildcard $(PLUGIN_SRC)/*.c)))
# We need to ensure expand the run-plugin-TEST-with-PLUGIN
# pre-requistes manually here as we can't use stems to handle it. We
# also add some special helpers the run-plugin- rules can use bellow.
$(foreach p,$(PLUGINS), \
$(foreach t,$(TESTS),\
$(eval run-plugin-$(t)-with-$(p): $t $p) \
$(eval run-plugin-$(t)-with-$(p): TIMEOUT=60) \
$(eval RUN_TESTS+=run-plugin-$(t)-with-$(p))))
endif
strip-plugin = $(wordlist 1, 1, $(subst -with-, ,$1))
extract-plugin = $(wordlist 2, 2, $(subst -with-, ,$1))
RUN_TESTS+=$(EXTRA_RUNS)
ifdef CONFIG_USER_ONLY
run-%: %
$(call run-test, $<, $(QEMU) $(QEMU_OPTS) $<, "$< on $(TARGET_NAME)")
run-plugin-%:
$(call run-test, $@, $(QEMU) $(QEMU_OPTS) \
-plugin $(PLUGIN_LIB)/$(call extract-plugin,$@) \
-d plugin -D $*.pout \
$(call strip-plugin,$<), \
"$* on $(TARGET_NAME)")
else
run-%: %
$(call run-test, $<, \
$(QEMU) -monitor none -display none \
-chardev file$(COMMA)path=$<.out$(COMMA)id=output \
$(QEMU_OPTS) $<, \
"$< on $(TARGET_NAME)")
run-plugin-%:
$(call run-test, $@, \
$(QEMU) -monitor none -display none \
-chardev file$(COMMA)path=$@.out$(COMMA)id=output \
-plugin $(PLUGIN_LIB)/$(call extract-plugin,$@) \
-d plugin -D $*.pout \
$(QEMU_OPTS) $(call strip-plugin,$<), \
"$* on $(TARGET_NAME)")
endif
gdb-%: %
gdb --args $(QEMU) $(QEMU_OPTS) $<
.PHONY: run
run: $(RUN_TESTS)
# There is no clean target, the calling make just rm's the tests build dir