qemu/qapi/crypto.json
Kevin Wolf d09e49374b qapi/qom: Add ObjectOptions for tls-*, deprecate 'loaded'
This adds a QAPI schema for the properties of the tls-* objects.

The 'loaded' property doesn't seem to make sense as an external
interface: It is automatically set to true in ucc->complete, and
explicitly setting it to true earlier just means that additional options
will be silently ignored.

In other words, the 'loaded' property is useless. Mark it as deprecated
in the schema from the start.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2021-03-19 10:17:13 +01:00

543 lines
16 KiB
Python

# -*- Mode: Python -*-
# vim: filetype=python
#
##
# = Cryptography
##
##
# @QCryptoTLSCredsEndpoint:
#
# The type of network endpoint that will be using the credentials.
# Most types of credential require different setup / structures
# depending on whether they will be used in a server versus a
# client.
#
# @client: the network endpoint is acting as the client
#
# @server: the network endpoint is acting as the server
#
# Since: 2.5
##
{ 'enum': 'QCryptoTLSCredsEndpoint',
'prefix': 'QCRYPTO_TLS_CREDS_ENDPOINT',
'data': ['client', 'server']}
##
# @QCryptoSecretFormat:
#
# The data format that the secret is provided in
#
# @raw: raw bytes. When encoded in JSON only valid UTF-8 sequences can be used
# @base64: arbitrary base64 encoded binary data
# Since: 2.6
##
{ 'enum': 'QCryptoSecretFormat',
'prefix': 'QCRYPTO_SECRET_FORMAT',
'data': ['raw', 'base64']}
##
# @QCryptoHashAlgorithm:
#
# The supported algorithms for computing content digests
#
# @md5: MD5. Should not be used in any new code, legacy compat only
# @sha1: SHA-1. Should not be used in any new code, legacy compat only
# @sha224: SHA-224. (since 2.7)
# @sha256: SHA-256. Current recommended strong hash.
# @sha384: SHA-384. (since 2.7)
# @sha512: SHA-512. (since 2.7)
# @ripemd160: RIPEMD-160. (since 2.7)
# Since: 2.6
##
{ 'enum': 'QCryptoHashAlgorithm',
'prefix': 'QCRYPTO_HASH_ALG',
'data': ['md5', 'sha1', 'sha224', 'sha256', 'sha384', 'sha512', 'ripemd160']}
##
# @QCryptoCipherAlgorithm:
#
# The supported algorithms for content encryption ciphers
#
# @aes-128: AES with 128 bit / 16 byte keys
# @aes-192: AES with 192 bit / 24 byte keys
# @aes-256: AES with 256 bit / 32 byte keys
# @des-rfb: RFB specific variant of single DES. Do not use except in VNC.
# @3des: 3DES(EDE) with 192 bit / 24 byte keys (since 2.9)
# @cast5-128: Cast5 with 128 bit / 16 byte keys
# @serpent-128: Serpent with 128 bit / 16 byte keys
# @serpent-192: Serpent with 192 bit / 24 byte keys
# @serpent-256: Serpent with 256 bit / 32 byte keys
# @twofish-128: Twofish with 128 bit / 16 byte keys
# @twofish-192: Twofish with 192 bit / 24 byte keys
# @twofish-256: Twofish with 256 bit / 32 byte keys
# Since: 2.6
##
{ 'enum': 'QCryptoCipherAlgorithm',
'prefix': 'QCRYPTO_CIPHER_ALG',
'data': ['aes-128', 'aes-192', 'aes-256',
'des-rfb', '3des',
'cast5-128',
'serpent-128', 'serpent-192', 'serpent-256',
'twofish-128', 'twofish-192', 'twofish-256']}
##
# @QCryptoCipherMode:
#
# The supported modes for content encryption ciphers
#
# @ecb: Electronic Code Book
# @cbc: Cipher Block Chaining
# @xts: XEX with tweaked code book and ciphertext stealing
# @ctr: Counter (Since 2.8)
# Since: 2.6
##
{ 'enum': 'QCryptoCipherMode',
'prefix': 'QCRYPTO_CIPHER_MODE',
'data': ['ecb', 'cbc', 'xts', 'ctr']}
##
# @QCryptoIVGenAlgorithm:
#
# The supported algorithms for generating initialization
# vectors for full disk encryption. The 'plain' generator
# should not be used for disks with sector numbers larger
# than 2^32, except where compatibility with pre-existing
# Linux dm-crypt volumes is required.
#
# @plain: 64-bit sector number truncated to 32-bits
# @plain64: 64-bit sector number
# @essiv: 64-bit sector number encrypted with a hash of the encryption key
# Since: 2.6
##
{ 'enum': 'QCryptoIVGenAlgorithm',
'prefix': 'QCRYPTO_IVGEN_ALG',
'data': ['plain', 'plain64', 'essiv']}
##
# @QCryptoBlockFormat:
#
# The supported full disk encryption formats
#
# @qcow: QCow/QCow2 built-in AES-CBC encryption. Use only
# for liberating data from old images.
# @luks: LUKS encryption format. Recommended for new images
#
# Since: 2.6
##
{ 'enum': 'QCryptoBlockFormat',
# 'prefix': 'QCRYPTO_BLOCK_FORMAT',
'data': ['qcow', 'luks']}
##
# @QCryptoBlockOptionsBase:
#
# The common options that apply to all full disk
# encryption formats
#
# @format: the encryption format
#
# Since: 2.6
##
{ 'struct': 'QCryptoBlockOptionsBase',
'data': { 'format': 'QCryptoBlockFormat' }}
##
# @QCryptoBlockOptionsQCow:
#
# The options that apply to QCow/QCow2 AES-CBC encryption format
#
# @key-secret: the ID of a QCryptoSecret object providing the
# decryption key. Mandatory except when probing image for
# metadata only.
#
# Since: 2.6
##
{ 'struct': 'QCryptoBlockOptionsQCow',
'data': { '*key-secret': 'str' }}
##
# @QCryptoBlockOptionsLUKS:
#
# The options that apply to LUKS encryption format
#
# @key-secret: the ID of a QCryptoSecret object providing the
# decryption key. Mandatory except when probing image for
# metadata only.
# Since: 2.6
##
{ 'struct': 'QCryptoBlockOptionsLUKS',
'data': { '*key-secret': 'str' }}
##
# @QCryptoBlockCreateOptionsLUKS:
#
# The options that apply to LUKS encryption format initialization
#
# @cipher-alg: the cipher algorithm for data encryption
# Currently defaults to 'aes-256'.
# @cipher-mode: the cipher mode for data encryption
# Currently defaults to 'xts'
# @ivgen-alg: the initialization vector generator
# Currently defaults to 'plain64'
# @ivgen-hash-alg: the initialization vector generator hash
# Currently defaults to 'sha256'
# @hash-alg: the master key hash algorithm
# Currently defaults to 'sha256'
# @iter-time: number of milliseconds to spend in
# PBKDF passphrase processing. Currently defaults
# to 2000. (since 2.8)
# Since: 2.6
##
{ 'struct': 'QCryptoBlockCreateOptionsLUKS',
'base': 'QCryptoBlockOptionsLUKS',
'data': { '*cipher-alg': 'QCryptoCipherAlgorithm',
'*cipher-mode': 'QCryptoCipherMode',
'*ivgen-alg': 'QCryptoIVGenAlgorithm',
'*ivgen-hash-alg': 'QCryptoHashAlgorithm',
'*hash-alg': 'QCryptoHashAlgorithm',
'*iter-time': 'int'}}
##
# @QCryptoBlockOpenOptions:
#
# The options that are available for all encryption formats
# when opening an existing volume
#
# Since: 2.6
##
{ 'union': 'QCryptoBlockOpenOptions',
'base': 'QCryptoBlockOptionsBase',
'discriminator': 'format',
'data': { 'qcow': 'QCryptoBlockOptionsQCow',
'luks': 'QCryptoBlockOptionsLUKS' } }
##
# @QCryptoBlockCreateOptions:
#
# The options that are available for all encryption formats
# when initializing a new volume
#
# Since: 2.6
##
{ 'union': 'QCryptoBlockCreateOptions',
'base': 'QCryptoBlockOptionsBase',
'discriminator': 'format',
'data': { 'qcow': 'QCryptoBlockOptionsQCow',
'luks': 'QCryptoBlockCreateOptionsLUKS' } }
##
# @QCryptoBlockInfoBase:
#
# The common information that applies to all full disk
# encryption formats
#
# @format: the encryption format
#
# Since: 2.7
##
{ 'struct': 'QCryptoBlockInfoBase',
'data': { 'format': 'QCryptoBlockFormat' }}
##
# @QCryptoBlockInfoLUKSSlot:
#
# Information about the LUKS block encryption key
# slot options
#
# @active: whether the key slot is currently in use
# @key-offset: offset to the key material in bytes
# @iters: number of PBKDF2 iterations for key material
# @stripes: number of stripes for splitting key material
#
# Since: 2.7
##
{ 'struct': 'QCryptoBlockInfoLUKSSlot',
'data': {'active': 'bool',
'*iters': 'int',
'*stripes': 'int',
'key-offset': 'int' } }
##
# @QCryptoBlockInfoLUKS:
#
# Information about the LUKS block encryption options
#
# @cipher-alg: the cipher algorithm for data encryption
# @cipher-mode: the cipher mode for data encryption
# @ivgen-alg: the initialization vector generator
# @ivgen-hash-alg: the initialization vector generator hash
# @hash-alg: the master key hash algorithm
# @payload-offset: offset to the payload data in bytes
# @master-key-iters: number of PBKDF2 iterations for key material
# @uuid: unique identifier for the volume
# @slots: information about each key slot
#
# Since: 2.7
##
{ 'struct': 'QCryptoBlockInfoLUKS',
'data': {'cipher-alg': 'QCryptoCipherAlgorithm',
'cipher-mode': 'QCryptoCipherMode',
'ivgen-alg': 'QCryptoIVGenAlgorithm',
'*ivgen-hash-alg': 'QCryptoHashAlgorithm',
'hash-alg': 'QCryptoHashAlgorithm',
'payload-offset': 'int',
'master-key-iters': 'int',
'uuid': 'str',
'slots': [ 'QCryptoBlockInfoLUKSSlot' ] }}
##
# @QCryptoBlockInfo:
#
# Information about the block encryption options
#
# Since: 2.7
##
{ 'union': 'QCryptoBlockInfo',
'base': 'QCryptoBlockInfoBase',
'discriminator': 'format',
'data': { 'luks': 'QCryptoBlockInfoLUKS' } }
##
# @QCryptoBlockLUKSKeyslotState:
#
# Defines state of keyslots that are affected by the update
#
# @active: The slots contain the given password and marked as active
# @inactive: The slots are erased (contain garbage) and marked as inactive
#
# Since: 5.1
##
{ 'enum': 'QCryptoBlockLUKSKeyslotState',
'data': [ 'active', 'inactive' ] }
##
# @QCryptoBlockAmendOptionsLUKS:
#
# This struct defines the update parameters that activate/de-activate set
# of keyslots
#
# @state: the desired state of the keyslots
#
# @new-secret: The ID of a QCryptoSecret object providing the password to be
# written into added active keyslots
#
# @old-secret: Optional (for deactivation only)
# If given will deactivate all keyslots that
# match password located in QCryptoSecret with this ID
#
# @iter-time: Optional (for activation only)
# Number of milliseconds to spend in
# PBKDF passphrase processing for the newly activated keyslot.
# Currently defaults to 2000.
#
# @keyslot: Optional. ID of the keyslot to activate/deactivate.
# For keyslot activation, keyslot should not be active already
# (this is unsafe to update an active keyslot),
# but possible if 'force' parameter is given.
# If keyslot is not given, first free keyslot will be written.
#
# For keyslot deactivation, this parameter specifies the exact
# keyslot to deactivate
#
# @secret: Optional. The ID of a QCryptoSecret object providing the
# password to use to retrieve current master key.
# Defaults to the same secret that was used to open the image
#
#
# Since 5.1
##
{ 'struct': 'QCryptoBlockAmendOptionsLUKS',
'data': { 'state': 'QCryptoBlockLUKSKeyslotState',
'*new-secret': 'str',
'*old-secret': 'str',
'*keyslot': 'int',
'*iter-time': 'int',
'*secret': 'str' } }
##
# @QCryptoBlockAmendOptions:
#
# The options that are available for all encryption formats
# when amending encryption settings
#
# Since: 5.1
##
{ 'union': 'QCryptoBlockAmendOptions',
'base': 'QCryptoBlockOptionsBase',
'discriminator': 'format',
'data': {
'luks': 'QCryptoBlockAmendOptionsLUKS' } }
##
# @SecretCommonProperties:
#
# Properties for objects of classes derived from secret-common.
#
# @loaded: if true, the secret is loaded immediately when applying this option
# and will probably fail when processing the next option. Don't use;
# only provided for compatibility. (default: false)
#
# @format: the data format that the secret is provided in (default: raw)
#
# @keyid: the name of another secret that should be used to decrypt the
# provided data. If not present, the data is assumed to be unencrypted.
#
# @iv: the random initialization vector used for encryption of this particular
# secret. Should be a base64 encrypted string of the 16-byte IV. Mandatory
# if @keyid is given. Ignored if @keyid is absent.
#
# Features:
# @deprecated: Member @loaded is deprecated. Setting true doesn't make sense,
# and false is already the default.
#
# Since: 2.6
##
{ 'struct': 'SecretCommonProperties',
'data': { '*loaded': { 'type': 'bool', 'features': ['deprecated'] },
'*format': 'QCryptoSecretFormat',
'*keyid': 'str',
'*iv': 'str' } }
##
# @SecretProperties:
#
# Properties for secret objects.
#
# Either @data or @file must be provided, but not both.
#
# @data: the associated with the secret from
#
# @file: the filename to load the data associated with the secret from
#
# Since: 2.6
##
{ 'struct': 'SecretProperties',
'base': 'SecretCommonProperties',
'data': { '*data': 'str',
'*file': 'str' } }
##
# @SecretKeyringProperties:
#
# Properties for secret_keyring objects.
#
# @serial: serial number that identifies a key to get from the kernel
#
# Since: 5.1
##
{ 'struct': 'SecretKeyringProperties',
'base': 'SecretCommonProperties',
'data': { 'serial': 'int32' } }
##
# @TlsCredsProperties:
#
# Properties for objects of classes derived from tls-creds.
#
# @verify-peer: if true the peer credentials will be verified once the
# handshake is completed. This is a no-op for anonymous
# credentials. (default: true)
#
# @dir: the path of the directory that contains the credential files
#
# @endpoint: whether the QEMU network backend that uses the credentials will be
# acting as a client or as a server (default: client)
#
# @priority: a gnutls priority string as described at
# https://gnutls.org/manual/html_node/Priority-Strings.html
#
# Since: 2.5
##
{ 'struct': 'TlsCredsProperties',
'data': { '*verify-peer': 'bool',
'*dir': 'str',
'*endpoint': 'QCryptoTLSCredsEndpoint',
'*priority': 'str' } }
##
# @TlsCredsAnonProperties:
#
# Properties for tls-creds-anon objects.
#
# @loaded: if true, the credentials are loaded immediately when applying this
# option and will ignore options that are processed later. Don't use;
# only provided for compatibility. (default: false)
#
# Features:
# @deprecated: Member @loaded is deprecated. Setting true doesn't make sense,
# and false is already the default.
#
# Since: 2.5
##
{ 'struct': 'TlsCredsAnonProperties',
'base': 'TlsCredsProperties',
'data': { '*loaded': { 'type': 'bool', 'features': ['deprecated'] } } }
##
# @TlsCredsPskProperties:
#
# Properties for tls-creds-psk objects.
#
# @loaded: if true, the credentials are loaded immediately when applying this
# option and will ignore options that are processed later. Don't use;
# only provided for compatibility. (default: false)
#
# @username: the username which will be sent to the server. For clients only.
# If absent, "qemu" is sent and the property will read back as an
# empty string.
#
# Features:
# @deprecated: Member @loaded is deprecated. Setting true doesn't make sense,
# and false is already the default.
#
# Since: 3.0
##
{ 'struct': 'TlsCredsPskProperties',
'base': 'TlsCredsProperties',
'data': { '*loaded': { 'type': 'bool', 'features': ['deprecated'] },
'*username': 'str' } }
##
# @TlsCredsX509Properties:
#
# Properties for tls-creds-x509 objects.
#
# @loaded: if true, the credentials are loaded immediately when applying this
# option and will ignore options that are processed later. Don't use;
# only provided for compatibility. (default: false)
#
# @sanity-check: if true, perform some sanity checks before using the
# credentials (default: true)
#
# @passwordid: For the server-key.pem and client-key.pem files which contain
# sensitive private keys, it is possible to use an encrypted
# version by providing the @passwordid parameter. This provides
# the ID of a previously created secret object containing the
# password for decryption.
#
# Features:
# @deprecated: Member @loaded is deprecated. Setting true doesn't make sense,
# and false is already the default.
#
# Since: 2.5
##
{ 'struct': 'TlsCredsX509Properties',
'base': 'TlsCredsProperties',
'data': { '*loaded': { 'type': 'bool', 'features': ['deprecated'] },
'*sanity-check': 'bool',
'*passwordid': 'str' } }