qemu/hw/spapr.c
David Gibson 92c93a816a pseries: Correct RAM size check for SLOF
The SLOF firmware used on the pseries machine needs a reasonable amount of
(guest) RAM in order to run, so we have a check in the machine init
function to check that this is available.  However, SLOF runs in real mode
(MMU off) which means it can only actually access the RMA (Real Mode Area),
not all of RAM.  In many cases the RMA is the same as all RAM, but when
running with Book3S HV KVM on PowerPC 970, the RMA must be especially
allocated to be (host) physically contiguous.  In this case, the RMA size
is determined by what the host admin allocated at boot time, and will
usually be less than the whole guest RAM size.

This patch corrects the test to see if SLOF has enough memory for this
case.

In addition, more recent versions of SLOF that were committed earlier don't
need quite as much memory as earlier versions.  Therefore, this patch also
reduces the amount of RAM we require to run SLOF.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-18 14:22:45 +01:00

614 lines
20 KiB
C

/*
* QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
*
* Copyright (c) 2004-2007 Fabrice Bellard
* Copyright (c) 2007 Jocelyn Mayer
* Copyright (c) 2010 David Gibson, IBM Corporation.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
*/
#include "sysemu.h"
#include "hw.h"
#include "elf.h"
#include "net.h"
#include "blockdev.h"
#include "cpus.h"
#include "kvm.h"
#include "kvm_ppc.h"
#include "hw/boards.h"
#include "hw/ppc.h"
#include "hw/loader.h"
#include "hw/spapr.h"
#include "hw/spapr_vio.h"
#include "hw/spapr_pci.h"
#include "hw/xics.h"
#include "kvm.h"
#include "kvm_ppc.h"
#include "pci.h"
#include "exec-memory.h"
#include <libfdt.h>
#define KERNEL_LOAD_ADDR 0x00000000
#define INITRD_LOAD_ADDR 0x02800000
#define FDT_MAX_SIZE 0x10000
#define RTAS_MAX_SIZE 0x10000
#define FW_MAX_SIZE 0x400000
#define FW_FILE_NAME "slof.bin"
#define MIN_RMA_SLOF 128UL
#define TIMEBASE_FREQ 512000000ULL
#define MAX_CPUS 256
#define XICS_IRQS 1024
#define SPAPR_PCI_BUID 0x800000020000001ULL
#define SPAPR_PCI_MEM_WIN_ADDR (0x10000000000ULL + 0xA0000000)
#define SPAPR_PCI_MEM_WIN_SIZE 0x20000000
#define SPAPR_PCI_IO_WIN_ADDR (0x10000000000ULL + 0x80000000)
#define PHANDLE_XICP 0x00001111
sPAPREnvironment *spapr;
qemu_irq spapr_allocate_irq(uint32_t hint, uint32_t *irq_num)
{
uint32_t irq;
qemu_irq qirq;
if (hint) {
irq = hint;
/* FIXME: we should probably check for collisions somehow */
} else {
irq = spapr->next_irq++;
}
qirq = xics_find_qirq(spapr->icp, irq);
if (!qirq) {
return NULL;
}
if (irq_num) {
*irq_num = irq;
}
return qirq;
}
static void *spapr_create_fdt_skel(const char *cpu_model,
target_phys_addr_t rma_size,
target_phys_addr_t initrd_base,
target_phys_addr_t initrd_size,
const char *boot_device,
const char *kernel_cmdline,
long hash_shift)
{
void *fdt;
CPUState *env;
uint64_t mem_reg_property_rma[] = { 0, cpu_to_be64(rma_size) };
uint64_t mem_reg_property_nonrma[] = { cpu_to_be64(rma_size),
cpu_to_be64(ram_size - rma_size) };
uint32_t start_prop = cpu_to_be32(initrd_base);
uint32_t end_prop = cpu_to_be32(initrd_base + initrd_size);
uint32_t pft_size_prop[] = {0, cpu_to_be32(hash_shift)};
char hypertas_prop[] = "hcall-pft\0hcall-term\0hcall-dabr\0hcall-interrupt"
"\0hcall-tce\0hcall-vio\0hcall-splpar\0hcall-bulk";
uint32_t interrupt_server_ranges_prop[] = {0, cpu_to_be32(smp_cpus)};
int i;
char *modelname;
int smt = kvmppc_smt_threads();
#define _FDT(exp) \
do { \
int ret = (exp); \
if (ret < 0) { \
fprintf(stderr, "qemu: error creating device tree: %s: %s\n", \
#exp, fdt_strerror(ret)); \
exit(1); \
} \
} while (0)
fdt = g_malloc0(FDT_MAX_SIZE);
_FDT((fdt_create(fdt, FDT_MAX_SIZE)));
_FDT((fdt_finish_reservemap(fdt)));
/* Root node */
_FDT((fdt_begin_node(fdt, "")));
_FDT((fdt_property_string(fdt, "device_type", "chrp")));
_FDT((fdt_property_string(fdt, "model", "IBM pSeries (emulated by qemu)")));
_FDT((fdt_property_cell(fdt, "#address-cells", 0x2)));
_FDT((fdt_property_cell(fdt, "#size-cells", 0x2)));
/* /chosen */
_FDT((fdt_begin_node(fdt, "chosen")));
_FDT((fdt_property_string(fdt, "bootargs", kernel_cmdline)));
_FDT((fdt_property(fdt, "linux,initrd-start",
&start_prop, sizeof(start_prop))));
_FDT((fdt_property(fdt, "linux,initrd-end",
&end_prop, sizeof(end_prop))));
_FDT((fdt_property_string(fdt, "qemu,boot-device", boot_device)));
/*
* Because we don't always invoke any firmware, we can't rely on
* that to do BAR allocation. Long term, we should probably do
* that ourselves, but for now, this setting (plus advertising the
* current BARs as 0) causes sufficiently recent kernels to to the
* BAR assignment themselves */
_FDT((fdt_property_cell(fdt, "linux,pci-probe-only", 0)));
_FDT((fdt_end_node(fdt)));
/* memory node(s) */
_FDT((fdt_begin_node(fdt, "memory@0")));
_FDT((fdt_property_string(fdt, "device_type", "memory")));
_FDT((fdt_property(fdt, "reg", mem_reg_property_rma,
sizeof(mem_reg_property_rma))));
_FDT((fdt_end_node(fdt)));
if (ram_size > rma_size) {
char mem_name[32];
sprintf(mem_name, "memory@%" PRIx64, (uint64_t)rma_size);
_FDT((fdt_begin_node(fdt, mem_name)));
_FDT((fdt_property_string(fdt, "device_type", "memory")));
_FDT((fdt_property(fdt, "reg", mem_reg_property_nonrma,
sizeof(mem_reg_property_nonrma))));
_FDT((fdt_end_node(fdt)));
}
/* cpus */
_FDT((fdt_begin_node(fdt, "cpus")));
_FDT((fdt_property_cell(fdt, "#address-cells", 0x1)));
_FDT((fdt_property_cell(fdt, "#size-cells", 0x0)));
modelname = g_strdup(cpu_model);
for (i = 0; i < strlen(modelname); i++) {
modelname[i] = toupper(modelname[i]);
}
for (env = first_cpu; env != NULL; env = env->next_cpu) {
int index = env->cpu_index;
uint32_t servers_prop[smp_threads];
uint32_t gservers_prop[smp_threads * 2];
char *nodename;
uint32_t segs[] = {cpu_to_be32(28), cpu_to_be32(40),
0xffffffff, 0xffffffff};
uint32_t tbfreq = kvm_enabled() ? kvmppc_get_tbfreq() : TIMEBASE_FREQ;
uint32_t cpufreq = kvm_enabled() ? kvmppc_get_clockfreq() : 1000000000;
if ((index % smt) != 0) {
continue;
}
if (asprintf(&nodename, "%s@%x", modelname, index) < 0) {
fprintf(stderr, "Allocation failure\n");
exit(1);
}
_FDT((fdt_begin_node(fdt, nodename)));
free(nodename);
_FDT((fdt_property_cell(fdt, "reg", index)));
_FDT((fdt_property_string(fdt, "device_type", "cpu")));
_FDT((fdt_property_cell(fdt, "cpu-version", env->spr[SPR_PVR])));
_FDT((fdt_property_cell(fdt, "dcache-block-size",
env->dcache_line_size)));
_FDT((fdt_property_cell(fdt, "icache-block-size",
env->icache_line_size)));
_FDT((fdt_property_cell(fdt, "timebase-frequency", tbfreq)));
_FDT((fdt_property_cell(fdt, "clock-frequency", cpufreq)));
_FDT((fdt_property_cell(fdt, "ibm,slb-size", env->slb_nr)));
_FDT((fdt_property(fdt, "ibm,pft-size",
pft_size_prop, sizeof(pft_size_prop))));
_FDT((fdt_property_string(fdt, "status", "okay")));
_FDT((fdt_property(fdt, "64-bit", NULL, 0)));
/* Build interrupt servers and gservers properties */
for (i = 0; i < smp_threads; i++) {
servers_prop[i] = cpu_to_be32(index + i);
/* Hack, direct the group queues back to cpu 0 */
gservers_prop[i*2] = cpu_to_be32(index + i);
gservers_prop[i*2 + 1] = 0;
}
_FDT((fdt_property(fdt, "ibm,ppc-interrupt-server#s",
servers_prop, sizeof(servers_prop))));
_FDT((fdt_property(fdt, "ibm,ppc-interrupt-gserver#s",
gservers_prop, sizeof(gservers_prop))));
if (env->mmu_model & POWERPC_MMU_1TSEG) {
_FDT((fdt_property(fdt, "ibm,processor-segment-sizes",
segs, sizeof(segs))));
}
/* Advertise VMX/VSX (vector extensions) if available
* 0 / no property == no vector extensions
* 1 == VMX / Altivec available
* 2 == VSX available */
if (env->insns_flags & PPC_ALTIVEC) {
uint32_t vmx = (env->insns_flags2 & PPC2_VSX) ? 2 : 1;
_FDT((fdt_property_cell(fdt, "ibm,vmx", vmx)));
}
/* Advertise DFP (Decimal Floating Point) if available
* 0 / no property == no DFP
* 1 == DFP available */
if (env->insns_flags2 & PPC2_DFP) {
_FDT((fdt_property_cell(fdt, "ibm,dfp", 1)));
}
_FDT((fdt_end_node(fdt)));
}
g_free(modelname);
_FDT((fdt_end_node(fdt)));
/* RTAS */
_FDT((fdt_begin_node(fdt, "rtas")));
_FDT((fdt_property(fdt, "ibm,hypertas-functions", hypertas_prop,
sizeof(hypertas_prop))));
_FDT((fdt_end_node(fdt)));
/* interrupt controller */
_FDT((fdt_begin_node(fdt, "interrupt-controller")));
_FDT((fdt_property_string(fdt, "device_type",
"PowerPC-External-Interrupt-Presentation")));
_FDT((fdt_property_string(fdt, "compatible", "IBM,ppc-xicp")));
_FDT((fdt_property(fdt, "interrupt-controller", NULL, 0)));
_FDT((fdt_property(fdt, "ibm,interrupt-server-ranges",
interrupt_server_ranges_prop,
sizeof(interrupt_server_ranges_prop))));
_FDT((fdt_property_cell(fdt, "#interrupt-cells", 2)));
_FDT((fdt_property_cell(fdt, "linux,phandle", PHANDLE_XICP)));
_FDT((fdt_property_cell(fdt, "phandle", PHANDLE_XICP)));
_FDT((fdt_end_node(fdt)));
/* vdevice */
_FDT((fdt_begin_node(fdt, "vdevice")));
_FDT((fdt_property_string(fdt, "device_type", "vdevice")));
_FDT((fdt_property_string(fdt, "compatible", "IBM,vdevice")));
_FDT((fdt_property_cell(fdt, "#address-cells", 0x1)));
_FDT((fdt_property_cell(fdt, "#size-cells", 0x0)));
_FDT((fdt_property_cell(fdt, "#interrupt-cells", 0x2)));
_FDT((fdt_property(fdt, "interrupt-controller", NULL, 0)));
_FDT((fdt_end_node(fdt)));
_FDT((fdt_end_node(fdt))); /* close root node */
_FDT((fdt_finish(fdt)));
return fdt;
}
static void spapr_finalize_fdt(sPAPREnvironment *spapr,
target_phys_addr_t fdt_addr,
target_phys_addr_t rtas_addr,
target_phys_addr_t rtas_size)
{
int ret;
void *fdt;
sPAPRPHBState *phb;
fdt = g_malloc(FDT_MAX_SIZE);
/* open out the base tree into a temp buffer for the final tweaks */
_FDT((fdt_open_into(spapr->fdt_skel, fdt, FDT_MAX_SIZE)));
ret = spapr_populate_vdevice(spapr->vio_bus, fdt);
if (ret < 0) {
fprintf(stderr, "couldn't setup vio devices in fdt\n");
exit(1);
}
QLIST_FOREACH(phb, &spapr->phbs, list) {
ret = spapr_populate_pci_devices(phb, PHANDLE_XICP, fdt);
}
if (ret < 0) {
fprintf(stderr, "couldn't setup PCI devices in fdt\n");
exit(1);
}
/* RTAS */
ret = spapr_rtas_device_tree_setup(fdt, rtas_addr, rtas_size);
if (ret < 0) {
fprintf(stderr, "Couldn't set up RTAS device tree properties\n");
}
_FDT((fdt_pack(fdt)));
cpu_physical_memory_write(fdt_addr, fdt, fdt_totalsize(fdt));
g_free(fdt);
}
static uint64_t translate_kernel_address(void *opaque, uint64_t addr)
{
return (addr & 0x0fffffff) + KERNEL_LOAD_ADDR;
}
static void emulate_spapr_hypercall(CPUState *env)
{
env->gpr[3] = spapr_hypercall(env, env->gpr[3], &env->gpr[4]);
}
static void spapr_reset(void *opaque)
{
sPAPREnvironment *spapr = (sPAPREnvironment *)opaque;
fprintf(stderr, "sPAPR reset\n");
/* flush out the hash table */
memset(spapr->htab, 0, spapr->htab_size);
/* Load the fdt */
spapr_finalize_fdt(spapr, spapr->fdt_addr, spapr->rtas_addr,
spapr->rtas_size);
/* Set up the entry state */
first_cpu->gpr[3] = spapr->fdt_addr;
first_cpu->gpr[5] = 0;
first_cpu->halted = 0;
first_cpu->nip = spapr->entry_point;
}
/* pSeries LPAR / sPAPR hardware init */
static void ppc_spapr_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUState *env;
int i;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
target_phys_addr_t rma_alloc_size, rma_size;
uint32_t initrd_base;
long kernel_size, initrd_size, fw_size;
long pteg_shift = 17;
char *filename;
spapr = g_malloc0(sizeof(*spapr));
QLIST_INIT(&spapr->phbs);
cpu_ppc_hypercall = emulate_spapr_hypercall;
/* Allocate RMA if necessary */
rma_alloc_size = kvmppc_alloc_rma("ppc_spapr.rma", sysmem);
if (rma_alloc_size == -1) {
hw_error("qemu: Unable to create RMA\n");
exit(1);
}
if (rma_alloc_size && (rma_alloc_size < ram_size)) {
rma_size = rma_alloc_size;
} else {
rma_size = ram_size;
}
/* We place the device tree just below either the top of the RMA,
* or just below 2GB, whichever is lowere, so that it can be
* processed with 32-bit real mode code if necessary */
spapr->fdt_addr = MIN(rma_size, 0x80000000) - FDT_MAX_SIZE;
spapr->rtas_addr = spapr->fdt_addr - RTAS_MAX_SIZE;
/* init CPUs */
if (cpu_model == NULL) {
cpu_model = kvm_enabled() ? "host" : "POWER7";
}
for (i = 0; i < smp_cpus; i++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find PowerPC CPU definition\n");
exit(1);
}
/* Set time-base frequency to 512 MHz */
cpu_ppc_tb_init(env, TIMEBASE_FREQ);
qemu_register_reset((QEMUResetHandler *)&cpu_reset, env);
env->hreset_vector = 0x60;
env->hreset_excp_prefix = 0;
env->gpr[3] = env->cpu_index;
}
/* allocate RAM */
spapr->ram_limit = ram_size;
if (spapr->ram_limit > rma_alloc_size) {
ram_addr_t nonrma_base = rma_alloc_size;
ram_addr_t nonrma_size = spapr->ram_limit - rma_alloc_size;
memory_region_init_ram(ram, NULL, "ppc_spapr.ram", nonrma_size);
memory_region_add_subregion(sysmem, nonrma_base, ram);
}
/* allocate hash page table. For now we always make this 16mb,
* later we should probably make it scale to the size of guest
* RAM */
spapr->htab_size = 1ULL << (pteg_shift + 7);
spapr->htab = qemu_memalign(spapr->htab_size, spapr->htab_size);
for (env = first_cpu; env != NULL; env = env->next_cpu) {
env->external_htab = spapr->htab;
env->htab_base = -1;
env->htab_mask = spapr->htab_size - 1;
/* Tell KVM that we're in PAPR mode */
env->spr[SPR_SDR1] = (unsigned long)spapr->htab |
((pteg_shift + 7) - 18);
env->spr[SPR_HIOR] = 0;
if (kvm_enabled()) {
kvmppc_set_papr(env);
}
}
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, "spapr-rtas.bin");
spapr->rtas_size = load_image_targphys(filename, spapr->rtas_addr,
ram_size - spapr->rtas_addr);
if (spapr->rtas_size < 0) {
hw_error("qemu: could not load LPAR rtas '%s'\n", filename);
exit(1);
}
g_free(filename);
/* Set up Interrupt Controller */
spapr->icp = xics_system_init(XICS_IRQS);
spapr->next_irq = 16;
/* Set up VIO bus */
spapr->vio_bus = spapr_vio_bus_init();
for (i = 0; i < MAX_SERIAL_PORTS; i++) {
if (serial_hds[i]) {
spapr_vty_create(spapr->vio_bus, SPAPR_VTY_BASE_ADDRESS + i,
serial_hds[i]);
}
}
/* Set up PCI */
spapr_create_phb(spapr, "pci", SPAPR_PCI_BUID,
SPAPR_PCI_MEM_WIN_ADDR,
SPAPR_PCI_MEM_WIN_SIZE,
SPAPR_PCI_IO_WIN_ADDR);
for (i = 0; i < nb_nics; i++) {
NICInfo *nd = &nd_table[i];
if (!nd->model) {
nd->model = g_strdup("ibmveth");
}
if (strcmp(nd->model, "ibmveth") == 0) {
spapr_vlan_create(spapr->vio_bus, 0x1000 + i, nd);
} else {
pci_nic_init_nofail(&nd_table[i], nd->model, NULL);
}
}
for (i = 0; i <= drive_get_max_bus(IF_SCSI); i++) {
spapr_vscsi_create(spapr->vio_bus, 0x2000 + i);
}
if (kernel_filename) {
uint64_t lowaddr = 0;
kernel_size = load_elf(kernel_filename, translate_kernel_address, NULL,
NULL, &lowaddr, NULL, 1, ELF_MACHINE, 0);
if (kernel_size < 0) {
kernel_size = load_image_targphys(kernel_filename,
KERNEL_LOAD_ADDR,
ram_size - KERNEL_LOAD_ADDR);
}
if (kernel_size < 0) {
fprintf(stderr, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
/* load initrd */
if (initrd_filename) {
initrd_base = INITRD_LOAD_ADDR;
initrd_size = load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
initrd_filename);
exit(1);
}
} else {
initrd_base = 0;
initrd_size = 0;
}
spapr->entry_point = KERNEL_LOAD_ADDR;
} else {
if (rma_size < (MIN_RMA_SLOF << 20)) {
fprintf(stderr, "qemu: pSeries SLOF firmware requires >= "
"%ldM guest RMA (Real Mode Area memory)\n", MIN_RMA_SLOF);
exit(1);
}
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, FW_FILE_NAME);
fw_size = load_image_targphys(filename, 0, FW_MAX_SIZE);
if (fw_size < 0) {
hw_error("qemu: could not load LPAR rtas '%s'\n", filename);
exit(1);
}
g_free(filename);
spapr->entry_point = 0x100;
initrd_base = 0;
initrd_size = 0;
/* SLOF will startup the secondary CPUs using RTAS,
rather than expecting a kexec() style entry */
for (env = first_cpu; env != NULL; env = env->next_cpu) {
env->halted = 1;
}
}
/* Prepare the device tree */
spapr->fdt_skel = spapr_create_fdt_skel(cpu_model, rma_size,
initrd_base, initrd_size,
boot_device, kernel_cmdline,
pteg_shift + 7);
assert(spapr->fdt_skel != NULL);
qemu_register_reset(spapr_reset, spapr);
}
static QEMUMachine spapr_machine = {
.name = "pseries",
.desc = "pSeries Logical Partition (PAPR compliant)",
.init = ppc_spapr_init,
.max_cpus = MAX_CPUS,
.no_vga = 1,
.no_parallel = 1,
.use_scsi = 1,
};
static void spapr_machine_init(void)
{
qemu_register_machine(&spapr_machine);
}
machine_init(spapr_machine_init);