qemu/docs/qemupciserial.inf
Gerd Hoffmann fe4f1793a6 serial: add windows inf file for the pci card to docs
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-22 13:26:42 -05:00

110 lines
3.3 KiB
INI

; qemupciserial.inf for QEMU, based on MSPORTS.INF
; The driver itself is shipped with Windows (serial.sys). This is
; just a inf file to tell windows which pci id the serial pci card
; emulated by qemu has, and to apply a name tag to it which windows
; will show in the device manager.
; Installing the driver: Go to device manager. You should find a "pci
; serial card" tagged with a yellow question mark. Open properties.
; Pick "update driver". Then "select driver manually". Pick "Ports
; (Com+Lpt)" from the list. Click "Have a disk". Select this file.
; Procedure may vary a bit depending on the windows version.
; FIXME: This file covers the single port version only.
[Version]
Signature="$CHICAGO$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%QEMU%
DriverVer=09/24/2012,1.3.0
[SourceDisksNames]
3426=windows cd
[SourceDisksFiles]
serial.sys = 3426
serenum.sys = 3426
[DestinationDirs]
DefaultDestDir = 11 ;LDID_SYS
ComPort.NT.Copy = 12 ;DIRID_DRIVERS
SerialEnumerator.NT.Copy=12 ;DIRID_DRIVERS
; Drivers
;----------------------------------------------------------
[Manufacturer]
%QEMU%=QEMU,NTx86
[QEMU.NTx86]
%QEMU-PCI_SERIAL.DeviceDesc% = ComPort, "PCI\VEN_1b36&DEV_0002&CC_0700"
; COM sections
;----------------------------------------------------------
[ComPort.AddReg]
HKR,,PortSubClass,1,01
[ComPort.NT]
AddReg=ComPort.AddReg, ComPort.NT.AddReg
LogConfig=caa
SyssetupPnPFlags = 1
[ComPort.NT.HW]
AddReg=ComPort.NT.HW.AddReg
[ComPort.NT.AddReg]
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
[ComPort.NT.HW.AddReg]
HKR,,"UpperFilters",0x00010000,"serenum"
;-------------- Service installation
; Port Driver (function driver for this device)
[ComPort.NT.Services]
AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
AddService = Serenum,,Serenum_Service_Inst
; -------------- Serial Port Driver install sections
[Serial_Service_Inst]
DisplayName = %Serial.SVCDESC%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 1 ; SERVICE_SYSTEM_START (this driver may do detection)
ErrorControl = 0 ; SERVICE_ERROR_IGNORE
ServiceBinary = %12%\serial.sys
LoadOrderGroup = Extended base
; -------------- Serenum Driver install section
[Serenum_Service_Inst]
DisplayName = %Serenum.SVCDESC%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\serenum.sys
LoadOrderGroup = PNP Filter
[Serial_EventLog_Inst]
AddReg = Serial_EventLog_AddReg
[Serial_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\serial.sys"
HKR,,TypesSupported,0x00010001,7
; The following sections are COM port resource configs.
; Section name format means:
; Char 1 = c (COM port)
; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any)
; Char 3 = IRQ config: #, a (any)
[caa] ; Any base, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=8@100-ffff%fff8(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[Strings]
QEMU="QEMU"
QEMU-PCI_SERIAL.DeviceDesc="QEMU Serial PCI Card"
Serial.SVCDESC = "Serial port driver"
Serenum.SVCDESC = "Serenum Filter Driver"