qemu/hw/usb.h
Gerd Hoffmann e0b8e72dd9 usb: fix port reset
commit 891fb2cd45 removed the implicit
detach before (re-)attaching in usb_attach().  Some usb host controllers
used that behavior though to do a port reset by a detach+attach
sequence.

This patch establishes old behavior by adding a new usb_reset() function
for port resets and putting it into use, thereby also unifying port
reset behavior of all host controllers.  The patch also adds asserts to
usb_attach() and usb_detach() to make sure the calls are symmetrical.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13 12:58:51 +02:00

395 lines
12 KiB
C

/*
* QEMU USB API
*
* Copyright (c) 2005 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "block.h"
#include "qdev.h"
#include "qemu-queue.h"
/* Constants related to the USB / PCI interaction */
#define USB_SBRN 0x60 /* Serial Bus Release Number Register */
#define USB_RELEASE_1 0x10 /* USB 1.0 */
#define USB_RELEASE_2 0x20 /* USB 2.0 */
#define USB_RELEASE_3 0x30 /* USB 3.0 */
#define USB_TOKEN_SETUP 0x2d
#define USB_TOKEN_IN 0x69 /* device -> host */
#define USB_TOKEN_OUT 0xe1 /* host -> device */
/* specific usb messages, also sent in the 'pid' parameter */
#define USB_MSG_ATTACH 0x100
#define USB_MSG_DETACH 0x101
#define USB_MSG_RESET 0x102
#define USB_RET_NODEV (-1)
#define USB_RET_NAK (-2)
#define USB_RET_STALL (-3)
#define USB_RET_BABBLE (-4)
#define USB_RET_ASYNC (-5)
#define USB_SPEED_LOW 0
#define USB_SPEED_FULL 1
#define USB_SPEED_HIGH 2
#define USB_SPEED_SUPER 3
#define USB_SPEED_MASK_LOW (1 << USB_SPEED_LOW)
#define USB_SPEED_MASK_FULL (1 << USB_SPEED_FULL)
#define USB_SPEED_MASK_HIGH (1 << USB_SPEED_HIGH)
#define USB_SPEED_MASK_SUPER (1 << USB_SPEED_SUPER)
#define USB_STATE_NOTATTACHED 0
#define USB_STATE_ATTACHED 1
//#define USB_STATE_POWERED 2
#define USB_STATE_DEFAULT 3
//#define USB_STATE_ADDRESS 4
//#define USB_STATE_CONFIGURED 5
#define USB_STATE_SUSPENDED 6
#define USB_CLASS_AUDIO 1
#define USB_CLASS_COMM 2
#define USB_CLASS_HID 3
#define USB_CLASS_PHYSICAL 5
#define USB_CLASS_STILL_IMAGE 6
#define USB_CLASS_PRINTER 7
#define USB_CLASS_MASS_STORAGE 8
#define USB_CLASS_HUB 9
#define USB_CLASS_CDC_DATA 0x0a
#define USB_CLASS_CSCID 0x0b
#define USB_CLASS_CONTENT_SEC 0x0d
#define USB_CLASS_APP_SPEC 0xfe
#define USB_CLASS_VENDOR_SPEC 0xff
#define USB_DIR_OUT 0
#define USB_DIR_IN 0x80
#define USB_TYPE_MASK (0x03 << 5)
#define USB_TYPE_STANDARD (0x00 << 5)
#define USB_TYPE_CLASS (0x01 << 5)
#define USB_TYPE_VENDOR (0x02 << 5)
#define USB_TYPE_RESERVED (0x03 << 5)
#define USB_RECIP_MASK 0x1f
#define USB_RECIP_DEVICE 0x00
#define USB_RECIP_INTERFACE 0x01
#define USB_RECIP_ENDPOINT 0x02
#define USB_RECIP_OTHER 0x03
#define DeviceRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
#define DeviceOutRequest ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
#define InterfaceRequest \
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
#define InterfaceOutRequest \
((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
#define EndpointRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
#define EndpointOutRequest \
((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
#define ClassInterfaceRequest \
((USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE)<<8)
#define ClassInterfaceOutRequest \
((USB_DIR_OUT|USB_TYPE_CLASS|USB_RECIP_INTERFACE)<<8)
#define USB_REQ_GET_STATUS 0x00
#define USB_REQ_CLEAR_FEATURE 0x01
#define USB_REQ_SET_FEATURE 0x03
#define USB_REQ_SET_ADDRESS 0x05
#define USB_REQ_GET_DESCRIPTOR 0x06
#define USB_REQ_SET_DESCRIPTOR 0x07
#define USB_REQ_GET_CONFIGURATION 0x08
#define USB_REQ_SET_CONFIGURATION 0x09
#define USB_REQ_GET_INTERFACE 0x0A
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
#define USB_DEVICE_SELF_POWERED 0
#define USB_DEVICE_REMOTE_WAKEUP 1
#define USB_DT_DEVICE 0x01
#define USB_DT_CONFIG 0x02
#define USB_DT_STRING 0x03
#define USB_DT_INTERFACE 0x04
#define USB_DT_ENDPOINT 0x05
#define USB_DT_DEVICE_QUALIFIER 0x06
#define USB_DT_OTHER_SPEED_CONFIG 0x07
#define USB_DT_DEBUG 0x0A
#define USB_DT_INTERFACE_ASSOC 0x0B
#define USB_ENDPOINT_XFER_CONTROL 0
#define USB_ENDPOINT_XFER_ISOC 1
#define USB_ENDPOINT_XFER_BULK 2
#define USB_ENDPOINT_XFER_INT 3
typedef struct USBBus USBBus;
typedef struct USBBusOps USBBusOps;
typedef struct USBPort USBPort;
typedef struct USBDevice USBDevice;
typedef struct USBDeviceInfo USBDeviceInfo;
typedef struct USBPacket USBPacket;
typedef struct USBDesc USBDesc;
typedef struct USBDescID USBDescID;
typedef struct USBDescDevice USBDescDevice;
typedef struct USBDescConfig USBDescConfig;
typedef struct USBDescIfaceAssoc USBDescIfaceAssoc;
typedef struct USBDescIface USBDescIface;
typedef struct USBDescEndpoint USBDescEndpoint;
typedef struct USBDescOther USBDescOther;
typedef struct USBDescString USBDescString;
struct USBDescString {
uint8_t index;
char *str;
QLIST_ENTRY(USBDescString) next;
};
/* definition of a USB device */
struct USBDevice {
DeviceState qdev;
USBDeviceInfo *info;
USBPort *port;
char *port_path;
void *opaque;
/* Actual connected speed */
int speed;
/* Supported speeds, not in info because it may be variable (hostdevs) */
int speedmask;
uint8_t addr;
char product_desc[32];
int auto_attach;
int attached;
int32_t state;
uint8_t setup_buf[8];
uint8_t data_buf[4096];
int32_t remote_wakeup;
int32_t setup_state;
int32_t setup_len;
int32_t setup_index;
QLIST_HEAD(, USBDescString) strings;
const USBDescDevice *device;
const USBDescConfig *config;
};
struct USBDeviceInfo {
DeviceInfo qdev;
int (*init)(USBDevice *dev);
/*
* Process USB packet.
* Called by the HC (Host Controller).
*
* Returns length of the transaction
* or one of the USB_RET_XXX codes.
*/
int (*handle_packet)(USBDevice *dev, USBPacket *p);
/*
* Called when a packet is canceled.
*/
void (*cancel_packet)(USBDevice *dev, USBPacket *p);
/*
* Called when device is destroyed.
*/
void (*handle_destroy)(USBDevice *dev);
/*
* Attach the device
*/
void (*handle_attach)(USBDevice *dev);
/*
* Reset the device
*/
void (*handle_reset)(USBDevice *dev);
/*
* Process control request.
* Called from handle_packet().
*
* Returns length or one of the USB_RET_ codes.
*/
int (*handle_control)(USBDevice *dev, USBPacket *p, int request, int value,
int index, int length, uint8_t *data);
/*
* Process data transfers (both BULK and ISOC).
* Called from handle_packet().
*
* Returns length or one of the USB_RET_ codes.
*/
int (*handle_data)(USBDevice *dev, USBPacket *p);
const char *product_desc;
const USBDesc *usb_desc;
/* handle legacy -usbdevice command line options */
const char *usbdevice_name;
USBDevice *(*usbdevice_init)(const char *params);
};
typedef struct USBPortOps {
void (*attach)(USBPort *port);
void (*detach)(USBPort *port);
/*
* This gets called when a device downstream from the device attached to
* the port (iow attached through a hub) gets detached.
*/
void (*child_detach)(USBPort *port, USBDevice *child);
void (*wakeup)(USBPort *port);
/*
* Note that port->dev will be different then the device from which
* the packet originated when a hub is involved, if you want the orginating
* device use p->owner
*/
void (*complete)(USBPort *port, USBPacket *p);
} USBPortOps;
/* USB port on which a device can be connected */
struct USBPort {
USBDevice *dev;
int speedmask;
char path[16];
USBPortOps *ops;
void *opaque;
int index; /* internal port index, may be used with the opaque */
QTAILQ_ENTRY(USBPort) next;
};
typedef void USBCallback(USBPacket * packet, void *opaque);
/* Structure used to hold information about an active USB packet. */
struct USBPacket {
/* Data fields for use by the driver. */
int pid;
uint8_t devaddr;
uint8_t devep;
QEMUIOVector iov;
int result; /* transfer length or USB_RET_* status code */
/* Internal use by the USB layer. */
USBDevice *owner;
};
void usb_packet_init(USBPacket *p);
void usb_packet_setup(USBPacket *p, int pid, uint8_t addr, uint8_t ep);
void usb_packet_addbuf(USBPacket *p, void *ptr, size_t len);
int usb_packet_map(USBPacket *p, QEMUSGList *sgl);
void usb_packet_unmap(USBPacket *p);
void usb_packet_copy(USBPacket *p, void *ptr, size_t bytes);
void usb_packet_skip(USBPacket *p, size_t bytes);
void usb_packet_cleanup(USBPacket *p);
int usb_handle_packet(USBDevice *dev, USBPacket *p);
void usb_packet_complete(USBDevice *dev, USBPacket *p);
void usb_cancel_packet(USBPacket * p);
void usb_attach(USBPort *port);
void usb_detach(USBPort *port);
void usb_reset(USBPort *port);
void usb_wakeup(USBDevice *dev);
int usb_generic_handle_packet(USBDevice *s, USBPacket *p);
void usb_generic_async_ctrl_complete(USBDevice *s, USBPacket *p);
int set_usb_string(uint8_t *buf, const char *str);
void usb_send_msg(USBDevice *dev, int msg);
/* usb-linux.c */
USBDevice *usb_host_device_open(const char *devname);
int usb_host_device_close(const char *devname);
void usb_host_info(Monitor *mon);
/* usb-bt.c */
USBDevice *usb_bt_init(HCIInfo *hci);
/* usb ports of the VM */
#define VM_USB_HUB_SIZE 8
/* usb-musb.c */
enum musb_irq_source_e {
musb_irq_suspend = 0,
musb_irq_resume,
musb_irq_rst_babble,
musb_irq_sof,
musb_irq_connect,
musb_irq_disconnect,
musb_irq_vbus_request,
musb_irq_vbus_error,
musb_irq_rx,
musb_irq_tx,
musb_set_vbus,
musb_set_session,
/* Add new interrupts here */
musb_irq_max, /* total number of interrupts defined */
};
typedef struct MUSBState MUSBState;
MUSBState *musb_init(DeviceState *parent_device, int gpio_base);
void musb_reset(MUSBState *s);
uint32_t musb_core_intr_get(MUSBState *s);
void musb_core_intr_clear(MUSBState *s, uint32_t mask);
void musb_set_size(MUSBState *s, int epnum, int size, int is_tx);
/* usb-bus.c */
struct USBBus {
BusState qbus;
USBBusOps *ops;
int busnr;
int nfree;
int nused;
QTAILQ_HEAD(, USBPort) free;
QTAILQ_HEAD(, USBPort) used;
QTAILQ_ENTRY(USBBus) next;
};
struct USBBusOps {
int (*register_companion)(USBBus *bus, USBPort *ports[],
uint32_t portcount, uint32_t firstport);
};
void usb_bus_new(USBBus *bus, USBBusOps *ops, DeviceState *host);
USBBus *usb_bus_find(int busnr);
void usb_qdev_register(USBDeviceInfo *info);
void usb_qdev_register_many(USBDeviceInfo *info);
USBDevice *usb_create(USBBus *bus, const char *name);
USBDevice *usb_create_simple(USBBus *bus, const char *name);
USBDevice *usbdevice_create(const char *cmdline);
void usb_register_port(USBBus *bus, USBPort *port, void *opaque, int index,
USBPortOps *ops, int speedmask);
int usb_register_companion(const char *masterbus, USBPort *ports[],
uint32_t portcount, uint32_t firstport,
void *opaque, USBPortOps *ops, int speedmask);
void usb_port_location(USBPort *downstream, USBPort *upstream, int portnr);
void usb_unregister_port(USBBus *bus, USBPort *port);
int usb_claim_port(USBDevice *dev);
void usb_release_port(USBDevice *dev);
int usb_device_attach(USBDevice *dev);
int usb_device_detach(USBDevice *dev);
int usb_device_delete_addr(int busnr, int addr);
static inline USBBus *usb_bus_from_device(USBDevice *d)
{
return DO_UPCAST(USBBus, qbus, d->qdev.parent_bus);
}