Marc-André Lureau ba2aba8370 omap-gpio: remove PROP_PTR ... Since clocks are not QOM objects, replace PROP_PTR of clocks with setters methods. Move/adapt the existing TODO comment about a clock framework. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>		2020-01-07 17:24:29 +04:00
..
allwinner-a10.c
armsse.c
armv7m.c
aspeed.c	aspeed: Add support for the tacoma-bmc board	2019-12-16 10:46:34 +00:00
aspeed_ast2600.c	ast2600: Configure CNTFRQ at 1125MHz	2019-12-20 14:03:00 +00:00
aspeed_soc.c	aspeed: Change the "scu" property definition	2019-12-16 10:46:34 +00:00
bcm2835_peripherals.c	hw/arm/bcm2835_peripherals: Use the SYS_timer	2019-10-25 13:09:27 +01:00
bcm2836.c	hw/arm/bcm2836: Rename cpus[] as cpu[].core	2019-10-25 13:09:27 +01:00
boot.c	hw/arm/boot: Set NSACR.{CP11, CP10} in dummy SMC setup routine	2019-11-11 13:44:16 +00:00
collie.c	hw/arm/collie: Create the RAM in the board	2019-10-22 17:44:01 +01:00
cubieboard.c	Machine + x86 queue, 2019-09-03	2019-09-04 14:44:54 +01:00
digic.c
digic_boards.c	hw/arm/digic4: Inline digic4_board_setup_ram() function	2019-10-22 17:44:01 +01:00
exynos4_boards.c	Machine + x86 queue, 2019-09-03	2019-09-04 14:44:54 +01:00
exynos4210.c	hw/arm/exynos4210: Use the Samsung s3c SDHCI controller	2019-10-22 17:44:00 +01:00
fsl-imx6.c
fsl-imx6ul.c
fsl-imx7.c
fsl-imx25.c
fsl-imx31.c
gumstix.c
highbank.c	hw/arm/highbank: Use AddressSpace when using write_secondary_boot()	2019-10-25 13:09:27 +01:00
imx25_pdk.c
integratorcp.c
Kconfig	hw/arm/virt: Enable device memory cold/hot plug with ACPI boot	2019-10-05 17:12:08 -04:00
kzm.c
mainstone.c
Makefile.objs	aspeed/soc: Add AST2600 support	2019-10-15 18:09:05 +01:00
mcimx6ul-evk.c
mcimx7d-sabre.c	Machine + x86 queue, 2019-09-03	2019-09-04 14:44:54 +01:00
microbit.c
mps2-tz.c	hw/arm/mps2: Use the IEC binary prefix definitions	2019-10-22 17:44:00 +01:00
mps2.c	hw/arm/mps2: Use the IEC binary prefix definitions	2019-10-22 17:44:00 +01:00
msf2-soc.c
msf2-som.c
musca.c	hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory	2019-10-24 20:10:27 +02:00
musicpal.c	hw/arm/musicpal.c: Switch to transaction-based ptimer API	2019-10-15 18:09:02 +01:00
netduino2.c
nrf51_soc.c
nseries.c	hw/arm/nseries: Replace the bluetooth chardev with a "null" chardev	2019-12-16 17:24:07 +01:00
omap1.c	omap-gpio: remove PROP_PTR	2020-01-07 17:24:29 +04:00
omap2.c	omap-gpio: remove PROP_PTR	2020-01-07 17:24:29 +04:00
omap_sx1.c	hw/arm/omap1: Create the RAM in the board	2019-10-22 17:44:01 +01:00
palm.c	hw/arm/omap1: Create the RAM in the board	2019-10-22 17:44:01 +01:00
pxa2xx.c
pxa2xx_gpio.c
pxa2xx_pic.c
raspi.c	hw/arm/raspi: Use AddressSpace when using arm_boot::write_secondary_boot	2019-10-25 13:09:27 +01:00
realview.c
sabrelite.c
sbsa-ref.c	numa: properly check if numa is supported	2019-12-19 14:57:14 -03:00
smmu-common.c
smmu-internal.h
smmuv3-internal.h	hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macro	2019-12-20 14:03:00 +00:00
smmuv3.c	hw/arm/smmuv3: Report F_STE_FETCH fault address in correct word position	2019-12-20 14:03:00 +00:00
spitz.c
stellaris.c
stm32f205_soc.c
strongarm.c	hw/arm/collie: Create the RAM in the board	2019-10-22 17:44:01 +01:00
strongarm.h	hw/arm/collie: Create the RAM in the board	2019-10-22 17:44:01 +01:00
sysbus-fdt.c
tosa.c
trace-events
versatilepb.c
vexpress.c
virt-acpi-build.c	hw/arm/acpi: enable SHPC native hot plug	2019-12-16 10:46:35 +00:00
virt.c	target-arm queue:	2019-12-16 13:04:34 +00:00
xilinx_zynq.c	hw/arm/xilinx_zynq: Use the IEC binary prefix definitions	2019-10-22 17:44:00 +01:00
xlnx-versal-virt.c
xlnx-versal.c	hw/arm: versal: Add the CRP as unimplemented	2019-11-26 13:55:36 +00:00
xlnx-zcu102.c
xlnx-zynqmp.c
z2.c