qemu/hw/arm11mpcore.c
Paul Brook f7c703250c ARM PBX-A9 board support
Implement ARM RealView PBX-A9 board support.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-19 16:45:21 +00:00

113 lines
3.2 KiB
C

/*
* ARM11MPCore internal peripheral emulation.
*
* Copyright (c) 2006-2007 CodeSourcery.
* Written by Paul Brook
*
* This code is licenced under the GPL.
*/
/* ??? The MPCore TRM says the on-chip controller has 224 external IRQ lines
(+ 32 internal). However my test chip only exposes/reports 32.
More importantly Linux falls over if more than 32 are present! */
#define GIC_NIRQ 64
#include "mpcore.c"
/* Dummy PIC to route IRQ lines. The baseboard has 4 independent IRQ
controllers. The output of these, plus some of the raw input lines
are fed into a single SMP-aware interrupt controller on the CPU. */
typedef struct {
SysBusDevice busdev;
SysBusDevice *priv;
qemu_irq cpuic[32];
qemu_irq rvic[4][64];
uint32_t num_cpu;
} mpcore_rirq_state;
/* Map baseboard IRQs onto CPU IRQ lines. */
static const int mpcore_irq_map[32] = {
-1, -1, -1, -1, 1, 2, -1, -1,
-1, -1, 6, -1, 4, 5, -1, -1,
-1, 14, 15, 0, 7, 8, -1, -1,
-1, -1, -1, -1, 9, 3, -1, -1,
};
static void mpcore_rirq_set_irq(void *opaque, int irq, int level)
{
mpcore_rirq_state *s = (mpcore_rirq_state *)opaque;
int i;
for (i = 0; i < 4; i++) {
qemu_set_irq(s->rvic[i][irq], level);
}
if (irq < 32) {
irq = mpcore_irq_map[irq];
if (irq >= 0) {
qemu_set_irq(s->cpuic[irq], level);
}
}
}
static void mpcore_rirq_map(SysBusDevice *dev, target_phys_addr_t base)
{
mpcore_rirq_state *s = FROM_SYSBUS(mpcore_rirq_state, dev);
sysbus_mmio_map(s->priv, 0, base);
}
static int realview_mpcore_init(SysBusDevice *dev)
{
mpcore_rirq_state *s = FROM_SYSBUS(mpcore_rirq_state, dev);
DeviceState *gic;
DeviceState *priv;
int n;
int i;
priv = qdev_create(NULL, "arm11mpcore_priv");
qdev_prop_set_uint32(priv, "num-cpu", s->num_cpu);
qdev_init_nofail(priv);
s->priv = sysbus_from_qdev(priv);
sysbus_pass_irq(dev, s->priv);
for (i = 0; i < 32; i++) {
s->cpuic[i] = qdev_get_gpio_in(priv, i);
}
/* ??? IRQ routing is hardcoded to "normal" mode. */
for (n = 0; n < 4; n++) {
gic = sysbus_create_simple("realview_gic", 0x10040000 + n * 0x10000,
s->cpuic[10 + n]);
for (i = 0; i < 64; i++) {
s->rvic[n][i] = qdev_get_gpio_in(gic, i);
}
}
qdev_init_gpio_in(&dev->qdev, mpcore_rirq_set_irq, 64);
sysbus_init_mmio_cb(dev, 0x2000, mpcore_rirq_map);
return 0;
}
static SysBusDeviceInfo mpcore_rirq_info = {
.init = realview_mpcore_init,
.qdev.name = "realview_mpcore",
.qdev.size = sizeof(mpcore_rirq_state),
.qdev.props = (Property[]) {
DEFINE_PROP_UINT32("num-cpu", mpcore_rirq_state, num_cpu, 1),
DEFINE_PROP_END_OF_LIST(),
}
};
static SysBusDeviceInfo mpcore_priv_info = {
.init = mpcore_priv_init,
.qdev.name = "arm11mpcore_priv",
.qdev.size = sizeof(mpcore_priv_state),
.qdev.props = (Property[]) {
DEFINE_PROP_UINT32("num-cpu", mpcore_priv_state, num_cpu, 1),
DEFINE_PROP_END_OF_LIST(),
}
};
static void arm11mpcore_register_devices(void)
{
sysbus_register_withprop(&mpcore_rirq_info);
sysbus_register_withprop(&mpcore_priv_info);
}
device_init(arm11mpcore_register_devices)