qemu/hw/pc_piix.c
Markus Armbruster c0897e0cb9 pc: Fix CMOS info for drives defined with -device
Drives defined with -drive if=ide get get created along with the IDE
controller, inside machine->init().  That's before cmos_init().
Drives defined with -device get created during generic device init.
That's after cmos_init().  Because of that, CMOS has no information on
them (type, geometry, translation).  Older versions of Windows such as
XP reportedly choke on that.

Split off the part of CMOS initialization that needs to know about
-device devices, and turn it into a reset handler, so it runs after
device creation.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02 13:18:02 +02:00

339 lines
10 KiB
C

/*
* QEMU PC System Emulator
*
* Copyright (c) 2003-2004 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "hw.h"
#include "pc.h"
#include "apic.h"
#include "pci.h"
#include "usb-uhci.h"
#include "usb-ohci.h"
#include "net.h"
#include "boards.h"
#include "ide.h"
#include "kvm.h"
#include "sysemu.h"
#include "sysbus.h"
#define MAX_IDE_BUS 2
static const int ide_iobase[MAX_IDE_BUS] = { 0x1f0, 0x170 };
static const int ide_iobase2[MAX_IDE_BUS] = { 0x3f6, 0x376 };
static const int ide_irq[MAX_IDE_BUS] = { 14, 15 };
static void ioapic_init(IsaIrqState *isa_irq_state)
{
DeviceState *dev;
SysBusDevice *d;
unsigned int i;
dev = qdev_create(NULL, "ioapic");
qdev_init_nofail(dev);
d = sysbus_from_qdev(dev);
sysbus_mmio_map(d, 0, 0xfec00000);
for (i = 0; i < IOAPIC_NUM_PINS; i++) {
isa_irq_state->ioapic[i] = qdev_get_gpio_in(dev, i);
}
}
/* PC hardware initialisation */
static void pc_init1(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model,
int pci_enabled)
{
int i;
ram_addr_t below_4g_mem_size, above_4g_mem_size;
PCIBus *pci_bus;
PCII440FXState *i440fx_state;
int piix3_devfn = -1;
qemu_irq *cpu_irq;
qemu_irq *isa_irq;
qemu_irq *i8259;
qemu_irq *cmos_s3;
qemu_irq *smi_irq;
IsaIrqState *isa_irq_state;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
FDCtrl *floppy_controller;
BusState *idebus[MAX_IDE_BUS];
ISADevice *rtc_state;
pc_cpus_init(cpu_model);
vmport_init();
/* allocate ram and load rom/bios */
pc_memory_init(ram_size, kernel_filename, kernel_cmdline, initrd_filename,
&below_4g_mem_size, &above_4g_mem_size);
cpu_irq = pc_allocate_cpu_irq();
i8259 = i8259_init(cpu_irq[0]);
isa_irq_state = qemu_mallocz(sizeof(*isa_irq_state));
isa_irq_state->i8259 = i8259;
if (pci_enabled) {
ioapic_init(isa_irq_state);
}
isa_irq = qemu_allocate_irqs(isa_irq_handler, isa_irq_state, 24);
if (pci_enabled) {
pci_bus = i440fx_init(&i440fx_state, &piix3_devfn, isa_irq, ram_size);
} else {
pci_bus = NULL;
isa_bus_new(NULL);
}
isa_bus_irqs(isa_irq);
pc_register_ferr_irq(isa_reserve_irq(13));
pc_vga_init(pci_enabled? pci_bus: NULL);
/* init basic PC hardware */
pc_basic_device_init(isa_irq, &floppy_controller, &rtc_state);
for(i = 0; i < nb_nics; i++) {
NICInfo *nd = &nd_table[i];
if (!pci_enabled || (nd->model && strcmp(nd->model, "ne2k_isa") == 0))
pc_init_ne2k_isa(nd);
else
pci_nic_init_nofail(nd, "e1000", NULL);
}
if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
fprintf(stderr, "qemu: too many IDE bus\n");
exit(1);
}
for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
hd[i] = drive_get(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
}
if (pci_enabled) {
PCIDevice *dev;
dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
} else {
for(i = 0; i < MAX_IDE_BUS; i++) {
ISADevice *dev;
dev = isa_ide_init(ide_iobase[i], ide_iobase2[i], ide_irq[i],
hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
idebus[i] = qdev_get_child_bus(&dev->qdev, "ide.0");
}
}
pc_audio_init(pci_enabled ? pci_bus : NULL, isa_irq);
pc_cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device,
idebus[0], idebus[1], floppy_controller, rtc_state);
if (pci_enabled && usb_enabled) {
usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
}
if (pci_enabled && acpi_enabled) {
uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
i2c_bus *smbus;
cmos_s3 = qemu_allocate_irqs(pc_cmos_set_s3_resume, rtc_state, 1);
smi_irq = qemu_allocate_irqs(pc_acpi_smi_interrupt, first_cpu, 1);
/* TODO: Populate SPD eeprom data. */
smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
isa_reserve_irq(9), *cmos_s3, *smi_irq,
kvm_enabled());
for (i = 0; i < 8; i++) {
DeviceState *eeprom;
eeprom = qdev_create((BusState *)smbus, "smbus-eeprom");
qdev_prop_set_uint8(eeprom, "address", 0x50 + i);
qdev_prop_set_ptr(eeprom, "data", eeprom_buf + (i * 256));
qdev_init_nofail(eeprom);
}
}
if (i440fx_state) {
i440fx_init_memory_mappings(i440fx_state);
}
if (pci_enabled) {
pc_pci_device_init(pci_bus);
}
}
static void pc_init_pci(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
pc_init1(ram_size, boot_device,
kernel_filename, kernel_cmdline,
initrd_filename, cpu_model, 1);
}
static void pc_init_isa(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
if (cpu_model == NULL)
cpu_model = "486";
pc_init1(ram_size, boot_device,
kernel_filename, kernel_cmdline,
initrd_filename, cpu_model, 0);
}
static QEMUMachine pc_machine = {
.name = "pc-0.13",
.alias = "pc",
.desc = "Standard PC",
.init = pc_init_pci,
.max_cpus = 255,
.is_default = 1,
};
static QEMUMachine pc_machine_v0_12 = {
.name = "pc-0.12",
.desc = "Standard PC",
.init = pc_init_pci,
.max_cpus = 255,
.compat_props = (GlobalProperty[]) {
{
.driver = "virtio-serial-pci",
.property = "max_nr_ports",
.value = stringify(1),
},{
.driver = "virtio-serial-pci",
.property = "vectors",
.value = stringify(0),
},
{ /* end of list */ }
}
};
static QEMUMachine pc_machine_v0_11 = {
.name = "pc-0.11",
.desc = "Standard PC, qemu 0.11",
.init = pc_init_pci,
.max_cpus = 255,
.compat_props = (GlobalProperty[]) {
{
.driver = "virtio-blk-pci",
.property = "vectors",
.value = stringify(0),
},{
.driver = "virtio-serial-pci",
.property = "max_nr_ports",
.value = stringify(1),
},{
.driver = "virtio-serial-pci",
.property = "vectors",
.value = stringify(0),
},{
.driver = "ide-drive",
.property = "ver",
.value = "0.11",
},{
.driver = "scsi-disk",
.property = "ver",
.value = "0.11",
},{
.driver = "PCI",
.property = "rombar",
.value = stringify(0),
},
{ /* end of list */ }
}
};
static QEMUMachine pc_machine_v0_10 = {
.name = "pc-0.10",
.desc = "Standard PC, qemu 0.10",
.init = pc_init_pci,
.max_cpus = 255,
.compat_props = (GlobalProperty[]) {
{
.driver = "virtio-blk-pci",
.property = "class",
.value = stringify(PCI_CLASS_STORAGE_OTHER),
},{
.driver = "virtio-serial-pci",
.property = "class",
.value = stringify(PCI_CLASS_DISPLAY_OTHER),
},{
.driver = "virtio-serial-pci",
.property = "max_nr_ports",
.value = stringify(1),
},{
.driver = "virtio-serial-pci",
.property = "vectors",
.value = stringify(0),
},{
.driver = "virtio-net-pci",
.property = "vectors",
.value = stringify(0),
},{
.driver = "virtio-blk-pci",
.property = "vectors",
.value = stringify(0),
},{
.driver = "ide-drive",
.property = "ver",
.value = "0.10",
},{
.driver = "scsi-disk",
.property = "ver",
.value = "0.10",
},{
.driver = "PCI",
.property = "rombar",
.value = stringify(0),
},
{ /* end of list */ }
},
};
static QEMUMachine isapc_machine = {
.name = "isapc",
.desc = "ISA-only PC",
.init = pc_init_isa,
.max_cpus = 1,
};
static void pc_machine_init(void)
{
qemu_register_machine(&pc_machine);
qemu_register_machine(&pc_machine_v0_12);
qemu_register_machine(&pc_machine_v0_11);
qemu_register_machine(&pc_machine_v0_10);
qemu_register_machine(&isapc_machine);
}
machine_init(pc_machine_init);