qemu/hw/nvram/xlnx-bbram.c
Alberto Faria a9262f551e block: Change blk_{pread,pwrite}() param order
Swap 'buf' and 'bytes' around for consistency with
blk_co_{pread,pwrite}(), and in preparation to implement these functions
using generated_co_wrapper.

Callers were updated using this Coccinelle script:

    @@ expression blk, offset, buf, bytes, flags; @@
    - blk_pread(blk, offset, buf, bytes, flags)
    + blk_pread(blk, offset, bytes, buf, flags)

    @@ expression blk, offset, buf, bytes, flags; @@
    - blk_pwrite(blk, offset, buf, bytes, flags)
    + blk_pwrite(blk, offset, bytes, buf, flags)

It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.

Overly-long lines were then fixed by hand.

Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-4-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12 12:14:56 +02:00

545 lines
15 KiB
C

/*
* QEMU model of the Xilinx BBRAM Battery Backed RAM
*
* Copyright (c) 2014-2021 Xilinx Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "hw/nvram/xlnx-bbram.h"
#include "qemu/error-report.h"
#include "qemu/log.h"
#include "qapi/error.h"
#include "sysemu/blockdev.h"
#include "migration/vmstate.h"
#include "hw/qdev-properties.h"
#include "hw/qdev-properties-system.h"
#include "hw/nvram/xlnx-efuse.h"
#ifndef XLNX_BBRAM_ERR_DEBUG
#define XLNX_BBRAM_ERR_DEBUG 0
#endif
REG32(BBRAM_STATUS, 0x0)
FIELD(BBRAM_STATUS, AES_CRC_PASS, 9, 1)
FIELD(BBRAM_STATUS, AES_CRC_DONE, 8, 1)
FIELD(BBRAM_STATUS, BBRAM_ZEROIZED, 4, 1)
FIELD(BBRAM_STATUS, PGM_MODE, 0, 1)
REG32(BBRAM_CTRL, 0x4)
FIELD(BBRAM_CTRL, ZEROIZE, 0, 1)
REG32(PGM_MODE, 0x8)
REG32(BBRAM_AES_CRC, 0xc)
REG32(BBRAM_0, 0x10)
REG32(BBRAM_1, 0x14)
REG32(BBRAM_2, 0x18)
REG32(BBRAM_3, 0x1c)
REG32(BBRAM_4, 0x20)
REG32(BBRAM_5, 0x24)
REG32(BBRAM_6, 0x28)
REG32(BBRAM_7, 0x2c)
REG32(BBRAM_8, 0x30)
REG32(BBRAM_SLVERR, 0x34)
FIELD(BBRAM_SLVERR, ENABLE, 0, 1)
REG32(BBRAM_ISR, 0x38)
FIELD(BBRAM_ISR, APB_SLVERR, 0, 1)
REG32(BBRAM_IMR, 0x3c)
FIELD(BBRAM_IMR, APB_SLVERR, 0, 1)
REG32(BBRAM_IER, 0x40)
FIELD(BBRAM_IER, APB_SLVERR, 0, 1)
REG32(BBRAM_IDR, 0x44)
FIELD(BBRAM_IDR, APB_SLVERR, 0, 1)
REG32(BBRAM_MSW_LOCK, 0x4c)
FIELD(BBRAM_MSW_LOCK, VAL, 0, 1)
#define R_MAX (R_BBRAM_MSW_LOCK + 1)
#define RAM_MAX (A_BBRAM_8 + 4 - A_BBRAM_0)
#define BBRAM_PGM_MAGIC 0x757bdf0d
QEMU_BUILD_BUG_ON(R_MAX != ARRAY_SIZE(((XlnxBBRam *)0)->regs));
static bool bbram_msw_locked(XlnxBBRam *s)
{
return ARRAY_FIELD_EX32(s->regs, BBRAM_MSW_LOCK, VAL) != 0;
}
static bool bbram_pgm_enabled(XlnxBBRam *s)
{
return ARRAY_FIELD_EX32(s->regs, BBRAM_STATUS, PGM_MODE) != 0;
}
static void bbram_bdrv_error(XlnxBBRam *s, int rc, gchar *detail)
{
Error *errp = NULL;
error_setg_errno(&errp, -rc, "%s: BBRAM backstore %s failed.",
blk_name(s->blk), detail);
error_report("%s", error_get_pretty(errp));
error_free(errp);
g_free(detail);
}
static void bbram_bdrv_read(XlnxBBRam *s, Error **errp)
{
uint32_t *ram = &s->regs[R_BBRAM_0];
int nr = RAM_MAX;
if (!s->blk) {
return;
}
s->blk_ro = !blk_supports_write_perm(s->blk);
if (!s->blk_ro) {
int rc;
rc = blk_set_perm(s->blk,
(BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE),
BLK_PERM_ALL, NULL);
if (rc) {
s->blk_ro = true;
}
}
if (s->blk_ro) {
warn_report("%s: Skip saving updates to read-only BBRAM backstore.",
blk_name(s->blk));
}
if (blk_pread(s->blk, 0, nr, ram, 0) < 0) {
error_setg(errp,
"%s: Failed to read %u bytes from BBRAM backstore.",
blk_name(s->blk), nr);
return;
}
/* Convert from little-endian backstore for each 32-bit word */
nr /= 4;
while (nr--) {
ram[nr] = le32_to_cpu(ram[nr]);
}
}
static void bbram_bdrv_sync(XlnxBBRam *s, uint64_t hwaddr)
{
uint32_t le32;
unsigned offset;
int rc;
assert(A_BBRAM_0 <= hwaddr && hwaddr <= A_BBRAM_8);
/* Backstore is always in little-endian */
le32 = cpu_to_le32(s->regs[hwaddr / 4]);
/* Update zeroized flag */
if (le32 && (hwaddr != A_BBRAM_8 || s->bbram8_wo)) {
ARRAY_FIELD_DP32(s->regs, BBRAM_STATUS, BBRAM_ZEROIZED, 0);
}
if (!s->blk || s->blk_ro) {
return;
}
offset = hwaddr - A_BBRAM_0;
rc = blk_pwrite(s->blk, offset, 4, &le32, 0);
if (rc < 0) {
bbram_bdrv_error(s, rc, g_strdup_printf("write to offset %u", offset));
}
}
static void bbram_bdrv_zero(XlnxBBRam *s)
{
int rc;
ARRAY_FIELD_DP32(s->regs, BBRAM_STATUS, BBRAM_ZEROIZED, 1);
if (!s->blk || s->blk_ro) {
return;
}
rc = blk_make_zero(s->blk, 0);
if (rc < 0) {
bbram_bdrv_error(s, rc, g_strdup("zeroizing"));
}
/* Restore bbram8 if it is non-zero */
if (s->regs[R_BBRAM_8]) {
bbram_bdrv_sync(s, A_BBRAM_8);
}
}
static void bbram_zeroize(XlnxBBRam *s)
{
int nr = RAM_MAX - (s->bbram8_wo ? 0 : 4); /* only wo bbram8 is cleared */
memset(&s->regs[R_BBRAM_0], 0, nr);
bbram_bdrv_zero(s);
}
static void bbram_update_irq(XlnxBBRam *s)
{
bool pending = s->regs[R_BBRAM_ISR] & ~s->regs[R_BBRAM_IMR];
qemu_set_irq(s->irq_bbram, pending);
}
static void bbram_ctrl_postw(RegisterInfo *reg, uint64_t val64)
{
XlnxBBRam *s = XLNX_BBRAM(reg->opaque);
uint32_t val = val64;
if (val & R_BBRAM_CTRL_ZEROIZE_MASK) {
bbram_zeroize(s);
/* The bit is self clearing */
s->regs[R_BBRAM_CTRL] &= ~R_BBRAM_CTRL_ZEROIZE_MASK;
}
}
static void bbram_pgm_mode_postw(RegisterInfo *reg, uint64_t val64)
{
XlnxBBRam *s = XLNX_BBRAM(reg->opaque);
uint32_t val = val64;
if (val == BBRAM_PGM_MAGIC) {
bbram_zeroize(s);
/* The status bit is cleared only by POR */
ARRAY_FIELD_DP32(s->regs, BBRAM_STATUS, PGM_MODE, 1);
}
}
static void bbram_aes_crc_postw(RegisterInfo *reg, uint64_t val64)
{
XlnxBBRam *s = XLNX_BBRAM(reg->opaque);
uint32_t calc_crc;
if (!bbram_pgm_enabled(s)) {
/* We are not in programming mode, don't do anything */
return;
}
/* Perform the AES integrity check */
s->regs[R_BBRAM_STATUS] |= R_BBRAM_STATUS_AES_CRC_DONE_MASK;
/*
* Set check status.
*
* ZynqMP BBRAM check has a zero-u32 prepended; see:
* https://github.com/Xilinx/embeddedsw/blob/release-2019.2/lib/sw_services/xilskey/src/xilskey_bbramps_zynqmp.c#L311
*/
calc_crc = xlnx_efuse_calc_crc(&s->regs[R_BBRAM_0],
(R_BBRAM_8 - R_BBRAM_0), s->crc_zpads);
ARRAY_FIELD_DP32(s->regs, BBRAM_STATUS, AES_CRC_PASS,
(s->regs[R_BBRAM_AES_CRC] == calc_crc));
}
static uint64_t bbram_key_prew(RegisterInfo *reg, uint64_t val64)
{
XlnxBBRam *s = XLNX_BBRAM(reg->opaque);
uint32_t original_data = *(uint32_t *) reg->data;
if (bbram_pgm_enabled(s)) {
return val64;
} else {
/* We are not in programming mode, don't do anything */
qemu_log_mask(LOG_GUEST_ERROR,
"Not in programming mode, dropping the write\n");
return original_data;
}
}
static void bbram_key_postw(RegisterInfo *reg, uint64_t val64)
{
XlnxBBRam *s = XLNX_BBRAM(reg->opaque);
bbram_bdrv_sync(s, reg->access->addr);
}
static uint64_t bbram_wo_postr(RegisterInfo *reg, uint64_t val)
{
return 0;
}
static uint64_t bbram_r8_postr(RegisterInfo *reg, uint64_t val)
{
XlnxBBRam *s = XLNX_BBRAM(reg->opaque);
return s->bbram8_wo ? bbram_wo_postr(reg, val) : val;
}
static bool bbram_r8_readonly(XlnxBBRam *s)
{
return !bbram_pgm_enabled(s) || bbram_msw_locked(s);
}
static uint64_t bbram_r8_prew(RegisterInfo *reg, uint64_t val64)
{
XlnxBBRam *s = XLNX_BBRAM(reg->opaque);
if (bbram_r8_readonly(s)) {
val64 = *(uint32_t *)reg->data;
}
return val64;
}
static void bbram_r8_postw(RegisterInfo *reg, uint64_t val64)
{
XlnxBBRam *s = XLNX_BBRAM(reg->opaque);
if (!bbram_r8_readonly(s)) {
bbram_bdrv_sync(s, A_BBRAM_8);
}
}
static uint64_t bbram_msw_lock_prew(RegisterInfo *reg, uint64_t val64)
{
XlnxBBRam *s = XLNX_BBRAM(reg->opaque);
/* Never lock if bbram8 is wo; and, only POR can clear the lock */
if (s->bbram8_wo) {
val64 = 0;
} else {
val64 |= s->regs[R_BBRAM_MSW_LOCK];
}
return val64;
}
static void bbram_isr_postw(RegisterInfo *reg, uint64_t val64)
{
XlnxBBRam *s = XLNX_BBRAM(reg->opaque);
bbram_update_irq(s);
}
static uint64_t bbram_ier_prew(RegisterInfo *reg, uint64_t val64)
{
XlnxBBRam *s = XLNX_BBRAM(reg->opaque);
uint32_t val = val64;
s->regs[R_BBRAM_IMR] &= ~val;
bbram_update_irq(s);
return 0;
}
static uint64_t bbram_idr_prew(RegisterInfo *reg, uint64_t val64)
{
XlnxBBRam *s = XLNX_BBRAM(reg->opaque);
uint32_t val = val64;
s->regs[R_BBRAM_IMR] |= val;
bbram_update_irq(s);
return 0;
}
static RegisterAccessInfo bbram_ctrl_regs_info[] = {
{ .name = "BBRAM_STATUS", .addr = A_BBRAM_STATUS,
.rsvd = 0xee,
.ro = 0x3ff,
},{ .name = "BBRAM_CTRL", .addr = A_BBRAM_CTRL,
.post_write = bbram_ctrl_postw,
},{ .name = "PGM_MODE", .addr = A_PGM_MODE,
.post_write = bbram_pgm_mode_postw,
},{ .name = "BBRAM_AES_CRC", .addr = A_BBRAM_AES_CRC,
.post_write = bbram_aes_crc_postw,
.post_read = bbram_wo_postr,
},{ .name = "BBRAM_0", .addr = A_BBRAM_0,
.pre_write = bbram_key_prew,
.post_write = bbram_key_postw,
.post_read = bbram_wo_postr,
},{ .name = "BBRAM_1", .addr = A_BBRAM_1,
.pre_write = bbram_key_prew,
.post_write = bbram_key_postw,
.post_read = bbram_wo_postr,
},{ .name = "BBRAM_2", .addr = A_BBRAM_2,
.pre_write = bbram_key_prew,
.post_write = bbram_key_postw,
.post_read = bbram_wo_postr,
},{ .name = "BBRAM_3", .addr = A_BBRAM_3,
.pre_write = bbram_key_prew,
.post_write = bbram_key_postw,
.post_read = bbram_wo_postr,
},{ .name = "BBRAM_4", .addr = A_BBRAM_4,
.pre_write = bbram_key_prew,
.post_write = bbram_key_postw,
.post_read = bbram_wo_postr,
},{ .name = "BBRAM_5", .addr = A_BBRAM_5,
.pre_write = bbram_key_prew,
.post_write = bbram_key_postw,
.post_read = bbram_wo_postr,
},{ .name = "BBRAM_6", .addr = A_BBRAM_6,
.pre_write = bbram_key_prew,
.post_write = bbram_key_postw,
.post_read = bbram_wo_postr,
},{ .name = "BBRAM_7", .addr = A_BBRAM_7,
.pre_write = bbram_key_prew,
.post_write = bbram_key_postw,
.post_read = bbram_wo_postr,
},{ .name = "BBRAM_8", .addr = A_BBRAM_8,
.pre_write = bbram_r8_prew,
.post_write = bbram_r8_postw,
.post_read = bbram_r8_postr,
},{ .name = "BBRAM_SLVERR", .addr = A_BBRAM_SLVERR,
.rsvd = ~1,
},{ .name = "BBRAM_ISR", .addr = A_BBRAM_ISR,
.w1c = 0x1,
.post_write = bbram_isr_postw,
},{ .name = "BBRAM_IMR", .addr = A_BBRAM_IMR,
.ro = 0x1,
},{ .name = "BBRAM_IER", .addr = A_BBRAM_IER,
.pre_write = bbram_ier_prew,
},{ .name = "BBRAM_IDR", .addr = A_BBRAM_IDR,
.pre_write = bbram_idr_prew,
},{ .name = "BBRAM_MSW_LOCK", .addr = A_BBRAM_MSW_LOCK,
.pre_write = bbram_msw_lock_prew,
.ro = ~R_BBRAM_MSW_LOCK_VAL_MASK,
}
};
static void bbram_ctrl_reset(DeviceState *dev)
{
XlnxBBRam *s = XLNX_BBRAM(dev);
unsigned int i;
for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) {
if (i < R_BBRAM_0 || i > R_BBRAM_8) {
register_reset(&s->regs_info[i]);
}
}
bbram_update_irq(s);
}
static const MemoryRegionOps bbram_ctrl_ops = {
.read = register_read_memory,
.write = register_write_memory,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
};
static void bbram_ctrl_realize(DeviceState *dev, Error **errp)
{
XlnxBBRam *s = XLNX_BBRAM(dev);
if (s->crc_zpads) {
s->bbram8_wo = true;
}
bbram_bdrv_read(s, errp);
}
static void bbram_ctrl_init(Object *obj)
{
XlnxBBRam *s = XLNX_BBRAM(obj);
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
RegisterInfoArray *reg_array;
reg_array =
register_init_block32(DEVICE(obj), bbram_ctrl_regs_info,
ARRAY_SIZE(bbram_ctrl_regs_info),
s->regs_info, s->regs,
&bbram_ctrl_ops,
XLNX_BBRAM_ERR_DEBUG,
R_MAX * 4);
sysbus_init_mmio(sbd, &reg_array->mem);
sysbus_init_irq(sbd, &s->irq_bbram);
}
static void bbram_prop_set_drive(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
DeviceState *dev = DEVICE(obj);
qdev_prop_drive.set(obj, v, name, opaque, errp);
/* Fill initial data if backend is attached after realized */
if (dev->realized) {
bbram_bdrv_read(XLNX_BBRAM(obj), errp);
}
}
static void bbram_prop_get_drive(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
qdev_prop_drive.get(obj, v, name, opaque, errp);
}
static void bbram_prop_release_drive(Object *obj, const char *name,
void *opaque)
{
qdev_prop_drive.release(obj, name, opaque);
}
static const PropertyInfo bbram_prop_drive = {
.name = "str",
.description = "Node name or ID of a block device to use as BBRAM backend",
.realized_set_allowed = true,
.get = bbram_prop_get_drive,
.set = bbram_prop_set_drive,
.release = bbram_prop_release_drive,
};
static const VMStateDescription vmstate_bbram_ctrl = {
.name = TYPE_XLNX_BBRAM,
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32_ARRAY(regs, XlnxBBRam, R_MAX),
VMSTATE_END_OF_LIST(),
}
};
static Property bbram_ctrl_props[] = {
DEFINE_PROP("drive", XlnxBBRam, blk, bbram_prop_drive, BlockBackend *),
DEFINE_PROP_UINT32("crc-zpads", XlnxBBRam, crc_zpads, 1),
DEFINE_PROP_END_OF_LIST(),
};
static void bbram_ctrl_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->reset = bbram_ctrl_reset;
dc->realize = bbram_ctrl_realize;
dc->vmsd = &vmstate_bbram_ctrl;
device_class_set_props(dc, bbram_ctrl_props);
}
static const TypeInfo bbram_ctrl_info = {
.name = TYPE_XLNX_BBRAM,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(XlnxBBRam),
.class_init = bbram_ctrl_class_init,
.instance_init = bbram_ctrl_init,
};
static void bbram_ctrl_register_types(void)
{
type_register_static(&bbram_ctrl_info);
}
type_init(bbram_ctrl_register_types)