qemu/qapi/net.json
Markus Armbruster 8bf69544b5 qapi: Move @String out of common.json to discourage reuse
Use of String is problematic, because it results in awkward interface
documentation.  The previous commit cleaned up one instance.

Move String out of common.json next to its remaining users in net.json
to discourage reuse elsewhere.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-15-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2024-02-12 10:04:32 +01:00

1010 lines
26 KiB
Python

# -*- Mode: Python -*-
# vim: filetype=python
#
##
# = Net devices
##
{ 'include': 'sockets.json' }
##
# @set_link:
#
# Sets the link status of a virtual network adapter.
#
# @name: the device name of the virtual network adapter
#
# @up: true to set the link status to be up
#
# Returns:
# - Nothing on success
# - If @name is not a valid network device, DeviceNotFound
#
# Since: 0.14
#
# Notes: Not all network adapters support setting link status. This
# command will succeed even if the network adapter does not
# support link status notification.
#
# Example:
#
# -> { "execute": "set_link",
# "arguments": { "name": "e1000.0", "up": false } }
# <- { "return": {} }
##
{ 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} }
##
# @netdev_add:
#
# Add a network backend.
#
# Additional arguments depend on the type.
#
# Since: 0.14
#
# Returns:
# - Nothing on success
# - If @type is not a valid network backend, DeviceNotFound
#
# Example:
#
# -> { "execute": "netdev_add",
# "arguments": { "type": "user", "id": "netdev1",
# "dnssearch": [ { "str": "example.org" } ] } }
# <- { "return": {} }
##
{ 'command': 'netdev_add', 'data': 'Netdev', 'boxed': true,
'allow-preconfig': true }
##
# @netdev_del:
#
# Remove a network backend.
#
# @id: the name of the network backend to remove
#
# Returns:
# - Nothing on success
# - If @id is not a valid network backend, DeviceNotFound
#
# Since: 0.14
#
# Example:
#
# -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } }
# <- { "return": {} }
##
{ 'command': 'netdev_del', 'data': {'id': 'str'},
'allow-preconfig': true }
##
# @NetLegacyNicOptions:
#
# Create a new Network Interface Card.
#
# @netdev: id of -netdev to connect to
#
# @macaddr: MAC address
#
# @model: device model (e1000, rtl8139, virtio etc.)
#
# @addr: PCI device address
#
# @vectors: number of MSI-x vectors, 0 to disable MSI-X
#
# Since: 1.2
##
{ 'struct': 'NetLegacyNicOptions',
'data': {
'*netdev': 'str',
'*macaddr': 'str',
'*model': 'str',
'*addr': 'str',
'*vectors': 'uint32' } }
##
# @String:
#
# A fat type wrapping 'str', to be embedded in lists.
#
# Since: 1.2
##
{ 'struct': 'String',
'data': {
'str': 'str' } }
##
# @NetdevUserOptions:
#
# Use the user mode network stack which requires no administrator
# privilege to run.
#
# @hostname: client hostname reported by the builtin DHCP server
#
# @restrict: isolate the guest from the host
#
# @ipv4: whether to support IPv4, default true for enabled (since 2.6)
#
# @ipv6: whether to support IPv6, default true for enabled (since 2.6)
#
# @ip: legacy parameter, use net= instead
#
# @net: IP network address that the guest will see, in the form
# addr[/netmask] The netmask is optional, and can be either in the
# form a.b.c.d or as a number of valid top-most bits. Default is
# 10.0.2.0/24.
#
# @host: guest-visible address of the host
#
# @tftp: root directory of the built-in TFTP server
#
# @bootfile: BOOTP filename, for use with tftp=
#
# @dhcpstart: the first of the 16 IPs the built-in DHCP server can
# assign
#
# @dns: guest-visible address of the virtual nameserver
#
# @dnssearch: list of DNS suffixes to search, passed as DHCP option to
# the guest
#
# @domainname: guest-visible domain name of the virtual nameserver
# (since 3.0)
#
# @ipv6-prefix: IPv6 network prefix (default is fec0::) (since 2.6).
# The network prefix is given in the usual hexadecimal IPv6
# address notation.
#
# @ipv6-prefixlen: IPv6 network prefix length (default is 64) (since
# 2.6)
#
# @ipv6-host: guest-visible IPv6 address of the host (since 2.6)
#
# @ipv6-dns: guest-visible IPv6 address of the virtual nameserver
# (since 2.6)
#
# @smb: root directory of the built-in SMB server
#
# @smbserver: IP address of the built-in SMB server
#
# @hostfwd: redirect incoming TCP or UDP host connections to guest
# endpoints
#
# @guestfwd: forward guest TCP connections
#
# @tftp-server-name: RFC2132 "TFTP server name" string (Since 3.1)
#
# Since: 1.2
##
{ 'struct': 'NetdevUserOptions',
'data': {
'*hostname': 'str',
'*restrict': 'bool',
'*ipv4': 'bool',
'*ipv6': 'bool',
'*ip': 'str',
'*net': 'str',
'*host': 'str',
'*tftp': 'str',
'*bootfile': 'str',
'*dhcpstart': 'str',
'*dns': 'str',
'*dnssearch': ['String'],
'*domainname': 'str',
'*ipv6-prefix': 'str',
'*ipv6-prefixlen': 'int',
'*ipv6-host': 'str',
'*ipv6-dns': 'str',
'*smb': 'str',
'*smbserver': 'str',
'*hostfwd': ['String'],
'*guestfwd': ['String'],
'*tftp-server-name': 'str' } }
##
# @NetdevTapOptions:
#
# Used to configure a host TAP network interface backend.
#
# @ifname: interface name
#
# @fd: file descriptor of an already opened tap
#
# @fds: multiple file descriptors of already opened multiqueue capable
# tap
#
# @script: script to initialize the interface
#
# @downscript: script to shut down the interface
#
# @br: bridge name (since 2.8)
#
# @helper: command to execute to configure bridge
#
# @sndbuf: send buffer limit. Understands [TGMKkb] suffixes.
#
# @vnet_hdr: enable the IFF_VNET_HDR flag on the tap interface
#
# @vhost: enable vhost-net network accelerator
#
# @vhostfd: file descriptor of an already opened vhost net device
#
# @vhostfds: file descriptors of multiple already opened vhost net
# devices
#
# @vhostforce: vhost on for non-MSIX virtio guests
#
# @queues: number of queues to be created for multiqueue capable tap
#
# @poll-us: maximum number of microseconds that could be spent on busy
# polling for tap (since 2.7)
#
# Since: 1.2
##
{ 'struct': 'NetdevTapOptions',
'data': {
'*ifname': 'str',
'*fd': 'str',
'*fds': 'str',
'*script': 'str',
'*downscript': 'str',
'*br': 'str',
'*helper': 'str',
'*sndbuf': 'size',
'*vnet_hdr': 'bool',
'*vhost': 'bool',
'*vhostfd': 'str',
'*vhostfds': 'str',
'*vhostforce': 'bool',
'*queues': 'uint32',
'*poll-us': 'uint32'} }
##
# @NetdevSocketOptions:
#
# Socket netdevs are used to establish a network connection to another
# QEMU virtual machine via a TCP socket.
#
# @fd: file descriptor of an already opened socket
#
# @listen: port number, and optional hostname, to listen on
#
# @connect: port number, and optional hostname, to connect to
#
# @mcast: UDP multicast address and port number
#
# @localaddr: source address and port for multicast and udp packets
#
# @udp: UDP unicast address and port number
#
# Since: 1.2
##
{ 'struct': 'NetdevSocketOptions',
'data': {
'*fd': 'str',
'*listen': 'str',
'*connect': 'str',
'*mcast': 'str',
'*localaddr': 'str',
'*udp': 'str' } }
##
# @NetdevL2TPv3Options:
#
# Configure an Ethernet over L2TPv3 tunnel.
#
# @src: source address
#
# @dst: destination address
#
# @srcport: source port - mandatory for udp, optional for ip
#
# @dstport: destination port - mandatory for udp, optional for ip
#
# @ipv6: force the use of ipv6
#
# @udp: use the udp version of l2tpv3 encapsulation
#
# @cookie64: use 64 bit cookies
#
# @counter: have sequence counter
#
# @pincounter: pin sequence counter to zero - workaround for buggy
# implementations or networks with packet reorder
#
# @txcookie: 32 or 64 bit transmit cookie
#
# @rxcookie: 32 or 64 bit receive cookie
#
# @txsession: 32 bit transmit session
#
# @rxsession: 32 bit receive session - if not specified set to the
# same value as transmit
#
# @offset: additional offset - allows the insertion of additional
# application-specific data before the packet payload
#
# Since: 2.1
##
{ 'struct': 'NetdevL2TPv3Options',
'data': {
'src': 'str',
'dst': 'str',
'*srcport': 'str',
'*dstport': 'str',
'*ipv6': 'bool',
'*udp': 'bool',
'*cookie64': 'bool',
'*counter': 'bool',
'*pincounter': 'bool',
'*txcookie': 'uint64',
'*rxcookie': 'uint64',
'txsession': 'uint32',
'*rxsession': 'uint32',
'*offset': 'uint32' } }
##
# @NetdevVdeOptions:
#
# Connect to a vde switch running on the host.
#
# @sock: socket path
#
# @port: port number
#
# @group: group owner of socket
#
# @mode: permissions for socket
#
# Since: 1.2
##
{ 'struct': 'NetdevVdeOptions',
'data': {
'*sock': 'str',
'*port': 'uint16',
'*group': 'str',
'*mode': 'uint16' } }
##
# @NetdevBridgeOptions:
#
# Connect a host TAP network interface to a host bridge device.
#
# @br: bridge name
#
# @helper: command to execute to configure bridge
#
# Since: 1.2
##
{ 'struct': 'NetdevBridgeOptions',
'data': {
'*br': 'str',
'*helper': 'str' } }
##
# @NetdevHubPortOptions:
#
# Connect two or more net clients through a software hub.
#
# @hubid: hub identifier number
#
# @netdev: used to connect hub to a netdev instead of a device (since
# 2.12)
#
# Since: 1.2
##
{ 'struct': 'NetdevHubPortOptions',
'data': {
'hubid': 'int32',
'*netdev': 'str' } }
##
# @NetdevNetmapOptions:
#
# Connect a client to a netmap-enabled NIC or to a VALE switch port
#
# @ifname: Either the name of an existing network interface supported
# by netmap, or the name of a VALE port (created on the fly). A
# VALE port name is in the form 'valeXXX:YYY', where XXX and YYY
# are non-negative integers. XXX identifies a switch and YYY
# identifies a port of the switch. VALE ports having the same XXX
# are therefore connected to the same switch.
#
# @devname: path of the netmap device (default: '/dev/netmap').
#
# Since: 2.0
##
{ 'struct': 'NetdevNetmapOptions',
'data': {
'ifname': 'str',
'*devname': 'str' } }
##
# @AFXDPMode:
#
# Attach mode for a default XDP program
#
# @skb: generic mode, no driver support necessary
#
# @native: DRV mode, program is attached to a driver, packets are passed to
# the socket without allocation of skb.
#
# Since: 8.2
##
{ 'enum': 'AFXDPMode',
'data': [ 'native', 'skb' ],
'if': 'CONFIG_AF_XDP' }
##
# @NetdevAFXDPOptions:
#
# AF_XDP network backend
#
# @ifname: The name of an existing network interface.
#
# @mode: Attach mode for a default XDP program. If not specified, then
# 'native' will be tried first, then 'skb'.
#
# @force-copy: Force XDP copy mode even if device supports zero-copy.
# (default: false)
#
# @queues: number of queues to be used for multiqueue interfaces (default: 1).
#
# @start-queue: Use @queues starting from this queue number (default: 0).
#
# @inhibit: Don't load a default XDP program, use one already loaded to
# the interface (default: false). Requires @sock-fds.
#
# @sock-fds: A colon (:) separated list of file descriptors for already open
# but not bound AF_XDP sockets in the queue order. One fd per queue.
# These descriptors should already be added into XDP socket map for
# corresponding queues. Requires @inhibit.
#
# Since: 8.2
##
{ 'struct': 'NetdevAFXDPOptions',
'data': {
'ifname': 'str',
'*mode': 'AFXDPMode',
'*force-copy': 'bool',
'*queues': 'int',
'*start-queue': 'int',
'*inhibit': 'bool',
'*sock-fds': 'str' },
'if': 'CONFIG_AF_XDP' }
##
# @NetdevVhostUserOptions:
#
# Vhost-user network backend
#
# @chardev: name of a unix socket chardev
#
# @vhostforce: vhost on for non-MSIX virtio guests (default: false).
#
# @queues: number of queues to be created for multiqueue vhost-user
# (default: 1) (Since 2.5)
#
# Since: 2.1
##
{ 'struct': 'NetdevVhostUserOptions',
'data': {
'chardev': 'str',
'*vhostforce': 'bool',
'*queues': 'int' } }
##
# @NetdevVhostVDPAOptions:
#
# Vhost-vdpa network backend
#
# vDPA device is a device that uses a datapath which complies with the
# virtio specifications with a vendor specific control path.
#
# @vhostdev: path of vhost-vdpa device (default:'/dev/vhost-vdpa-0')
#
# @vhostfd: file descriptor of an already opened vhost vdpa device
#
# @queues: number of queues to be created for multiqueue vhost-vdpa
# (default: 1)
#
# @x-svq: Start device with (experimental) shadow virtqueue. (Since
# 7.1) (default: false)
#
# Features:
#
# @unstable: Member @x-svq is experimental.
#
# Since: 5.1
##
{ 'struct': 'NetdevVhostVDPAOptions',
'data': {
'*vhostdev': 'str',
'*vhostfd': 'str',
'*queues': 'int',
'*x-svq': {'type': 'bool', 'features' : [ 'unstable'] } } }
##
# @NetdevVmnetHostOptions:
#
# vmnet (host mode) network backend.
#
# Allows the vmnet interface to communicate with other vmnet
# interfaces that are in host mode and also with the host.
#
# @start-address: The starting IPv4 address to use for the interface.
# Must be in the private IP range (RFC 1918). Must be specified
# along with @end-address and @subnet-mask. This address is used
# as the gateway address. The subsequent address up to and
# including end-address are placed in the DHCP pool.
#
# @end-address: The DHCP IPv4 range end address to use for the
# interface. Must be in the private IP range (RFC 1918). Must be
# specified along with @start-address and @subnet-mask.
#
# @subnet-mask: The IPv4 subnet mask to use on the interface. Must be
# specified along with @start-address and @subnet-mask.
#
# @isolated: Enable isolation for this interface. Interface isolation
# ensures that vmnet interface is not able to communicate with any
# other vmnet interfaces. Only communication with host is
# allowed. Requires at least macOS Big Sur 11.0.
#
# @net-uuid: The identifier (UUID) to uniquely identify the isolated
# network vmnet interface should be added to. If set, no DHCP
# service is provided for this interface and network communication
# is allowed only with other interfaces added to this network
# identified by the UUID. Requires at least macOS Big Sur 11.0.
#
# Since: 7.1
##
{ 'struct': 'NetdevVmnetHostOptions',
'data': {
'*start-address': 'str',
'*end-address': 'str',
'*subnet-mask': 'str',
'*isolated': 'bool',
'*net-uuid': 'str' },
'if': 'CONFIG_VMNET' }
##
# @NetdevVmnetSharedOptions:
#
# vmnet (shared mode) network backend.
#
# Allows traffic originating from the vmnet interface to reach the
# Internet through a network address translator (NAT). The vmnet
# interface can communicate with the host and with other shared mode
# interfaces on the same subnet. If no DHCP settings, subnet mask and
# IPv6 prefix specified, the interface can communicate with any of
# other interfaces in shared mode.
#
# @start-address: The starting IPv4 address to use for the interface.
# Must be in the private IP range (RFC 1918). Must be specified
# along with @end-address and @subnet-mask. This address is used
# as the gateway address. The subsequent address up to and
# including end-address are placed in the DHCP pool.
#
# @end-address: The DHCP IPv4 range end address to use for the
# interface. Must be in the private IP range (RFC 1918). Must be
# specified along with @start-address and @subnet-mask.
#
# @subnet-mask: The IPv4 subnet mask to use on the interface. Must be
# specified along with @start-address and @subnet-mask.
#
# @isolated: Enable isolation for this interface. Interface isolation
# ensures that vmnet interface is not able to communicate with any
# other vmnet interfaces. Only communication with host is
# allowed. Requires at least macOS Big Sur 11.0.
#
# @nat66-prefix: The IPv6 prefix to use into guest network. Must be a
# unique local address i.e. start with fd00::/8 and have length of
# 64.
#
# Since: 7.1
##
{ 'struct': 'NetdevVmnetSharedOptions',
'data': {
'*start-address': 'str',
'*end-address': 'str',
'*subnet-mask': 'str',
'*isolated': 'bool',
'*nat66-prefix': 'str' },
'if': 'CONFIG_VMNET' }
##
# @NetdevVmnetBridgedOptions:
#
# vmnet (bridged mode) network backend.
#
# Bridges the vmnet interface with a physical network interface.
#
# @ifname: The name of the physical interface to be bridged.
#
# @isolated: Enable isolation for this interface. Interface isolation
# ensures that vmnet interface is not able to communicate with any
# other vmnet interfaces. Only communication with host is
# allowed. Requires at least macOS Big Sur 11.0.
#
# Since: 7.1
##
{ 'struct': 'NetdevVmnetBridgedOptions',
'data': {
'ifname': 'str',
'*isolated': 'bool' },
'if': 'CONFIG_VMNET' }
##
# @NetdevStreamOptions:
#
# Configuration info for stream socket netdev
#
# @addr: socket address to listen on (server=true) or connect to
# (server=false)
#
# @server: create server socket (default: false)
#
# @reconnect: For a client socket, if a socket is disconnected, then
# attempt a reconnect after the given number of seconds. Setting
# this to zero disables this function. (default: 0) (since 8.0)
#
# Only SocketAddress types 'unix', 'inet' and 'fd' are supported.
#
# Since: 7.2
##
{ 'struct': 'NetdevStreamOptions',
'data': {
'addr': 'SocketAddress',
'*server': 'bool',
'*reconnect': 'uint32' } }
##
# @NetdevDgramOptions:
#
# Configuration info for datagram socket netdev.
#
# @remote: remote address
#
# @local: local address
#
# Only SocketAddress types 'unix', 'inet' and 'fd' are supported.
#
# If remote address is present and it's a multicast address, local
# address is optional. Otherwise local address is required and remote
# address is optional.
#
# .. table:: Valid parameters combination table
# :widths: auto
#
# ============= ======== =====
# remote local okay?
# ============= ======== =====
# absent absent no
# absent not fd no
# absent fd yes
# multicast absent yes
# multicast present yes
# not multicast absent no
# not multicast present yes
# ============= ======== =====
#
# Since: 7.2
##
{ 'struct': 'NetdevDgramOptions',
'data': {
'*local': 'SocketAddress',
'*remote': 'SocketAddress' } }
##
# @NetClientDriver:
#
# Available netdev drivers.
#
# @l2tpv3: since 2.1
# @vhost-vdpa: since 5.1
# @vmnet-host: since 7.1
# @vmnet-shared: since 7.1
# @vmnet-bridged: since 7.1
# @stream: since 7.2
# @dgram: since 7.2
# @af-xdp: since 8.2
#
# Since: 2.7
##
{ 'enum': 'NetClientDriver',
'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'stream',
'dgram', 'vde', 'bridge', 'hubport', 'netmap', 'vhost-user',
'vhost-vdpa',
{ 'name': 'af-xdp', 'if': 'CONFIG_AF_XDP' },
{ 'name': 'vmnet-host', 'if': 'CONFIG_VMNET' },
{ 'name': 'vmnet-shared', 'if': 'CONFIG_VMNET' },
{ 'name': 'vmnet-bridged', 'if': 'CONFIG_VMNET' }] }
##
# @Netdev:
#
# Captures the configuration of a network device.
#
# @id: identifier for monitor commands.
#
# @type: Specify the driver used for interpreting remaining arguments.
#
# Since: 1.2
##
{ 'union': 'Netdev',
'base': { 'id': 'str', 'type': 'NetClientDriver' },
'discriminator': 'type',
'data': {
'nic': 'NetLegacyNicOptions',
'user': 'NetdevUserOptions',
'tap': 'NetdevTapOptions',
'l2tpv3': 'NetdevL2TPv3Options',
'socket': 'NetdevSocketOptions',
'stream': 'NetdevStreamOptions',
'dgram': 'NetdevDgramOptions',
'vde': 'NetdevVdeOptions',
'bridge': 'NetdevBridgeOptions',
'hubport': 'NetdevHubPortOptions',
'netmap': 'NetdevNetmapOptions',
'af-xdp': { 'type': 'NetdevAFXDPOptions',
'if': 'CONFIG_AF_XDP' },
'vhost-user': 'NetdevVhostUserOptions',
'vhost-vdpa': 'NetdevVhostVDPAOptions',
'vmnet-host': { 'type': 'NetdevVmnetHostOptions',
'if': 'CONFIG_VMNET' },
'vmnet-shared': { 'type': 'NetdevVmnetSharedOptions',
'if': 'CONFIG_VMNET' },
'vmnet-bridged': { 'type': 'NetdevVmnetBridgedOptions',
'if': 'CONFIG_VMNET' } } }
##
# @RxState:
#
# Packets receiving state
#
# @normal: filter assigned packets according to the mac-table
#
# @none: don't receive any assigned packet
#
# @all: receive all assigned packets
#
# Since: 1.6
##
{ 'enum': 'RxState', 'data': [ 'normal', 'none', 'all' ] }
##
# @RxFilterInfo:
#
# Rx-filter information for a NIC.
#
# @name: net client name
#
# @promiscuous: whether promiscuous mode is enabled
#
# @multicast: multicast receive state
#
# @unicast: unicast receive state
#
# @vlan: vlan receive state (Since 2.0)
#
# @broadcast-allowed: whether to receive broadcast
#
# @multicast-overflow: multicast table is overflowed or not
#
# @unicast-overflow: unicast table is overflowed or not
#
# @main-mac: the main macaddr string
#
# @vlan-table: a list of active vlan id
#
# @unicast-table: a list of unicast macaddr string
#
# @multicast-table: a list of multicast macaddr string
#
# Since: 1.6
##
{ 'struct': 'RxFilterInfo',
'data': {
'name': 'str',
'promiscuous': 'bool',
'multicast': 'RxState',
'unicast': 'RxState',
'vlan': 'RxState',
'broadcast-allowed': 'bool',
'multicast-overflow': 'bool',
'unicast-overflow': 'bool',
'main-mac': 'str',
'vlan-table': ['int'],
'unicast-table': ['str'],
'multicast-table': ['str'] }}
##
# @query-rx-filter:
#
# Return rx-filter information for all NICs (or for the given NIC).
#
# @name: net client name
#
# Returns: list of @RxFilterInfo for all NICs (or for the given NIC).
# Returns an error if the given @name doesn't exist, or given NIC
# doesn't support rx-filter querying, or given net client isn't a
# NIC.
#
# Since: 1.6
#
# Example:
#
# -> { "execute": "query-rx-filter", "arguments": { "name": "vnet0" } }
# <- { "return": [
# {
# "promiscuous": true,
# "name": "vnet0",
# "main-mac": "52:54:00:12:34:56",
# "unicast": "normal",
# "vlan": "normal",
# "vlan-table": [
# 4,
# 0
# ],
# "unicast-table": [
# ],
# "multicast": "normal",
# "multicast-overflow": false,
# "unicast-overflow": false,
# "multicast-table": [
# "01:00:5e:00:00:01",
# "33:33:00:00:00:01",
# "33:33:ff:12:34:56"
# ],
# "broadcast-allowed": false
# }
# ]
# }
##
{ 'command': 'query-rx-filter',
'data': { '*name': 'str' },
'returns': ['RxFilterInfo'] }
##
# @NIC_RX_FILTER_CHANGED:
#
# Emitted once until the 'query-rx-filter' command is executed, the
# first event will always be emitted
#
# @name: net client name
#
# @path: device path
#
# Since: 1.6
#
# Example:
#
# <- { "event": "NIC_RX_FILTER_CHANGED",
# "data": { "name": "vnet0",
# "path": "/machine/peripheral/vnet0/virtio-backend" },
# "timestamp": { "seconds": 1368697518, "microseconds": 326866 } }
##
{ 'event': 'NIC_RX_FILTER_CHANGED',
'data': { '*name': 'str', 'path': 'str' } }
##
# @AnnounceParameters:
#
# Parameters for self-announce timers
#
# @initial: Initial delay (in ms) before sending the first GARP/RARP
# announcement
#
# @max: Maximum delay (in ms) between GARP/RARP announcement packets
#
# @rounds: Number of self-announcement attempts
#
# @step: Delay increase (in ms) after each self-announcement attempt
#
# @interfaces: An optional list of interface names, which restricts
# the announcement to the listed interfaces. (Since 4.1)
#
# @id: A name to be used to identify an instance of announce-timers
# and to allow it to modified later. Not for use as part of the
# migration parameters. (Since 4.1)
#
# Since: 4.0
##
{ 'struct': 'AnnounceParameters',
'data': { 'initial': 'int',
'max': 'int',
'rounds': 'int',
'step': 'int',
'*interfaces': ['str'],
'*id' : 'str' } }
##
# @announce-self:
#
# Trigger generation of broadcast RARP frames to update network
# switches. This can be useful when network bonds fail-over the
# active slave.
#
# Example:
#
# -> { "execute": "announce-self",
# "arguments": {
# "initial": 50, "max": 550, "rounds": 10, "step": 50,
# "interfaces": ["vn2", "vn3"], "id": "bob" } }
# <- { "return": {} }
#
# Since: 4.0
##
{ 'command': 'announce-self', 'boxed': true,
'data' : 'AnnounceParameters'}
##
# @FAILOVER_NEGOTIATED:
#
# Emitted when VIRTIO_NET_F_STANDBY was enabled during feature
# negotiation. Failover primary devices which were hidden (not
# hotplugged when requested) before will now be hotplugged by the
# virtio-net standby device.
#
# @device-id: QEMU device id of the unplugged device
#
# Since: 4.2
#
# Example:
#
# <- { "event": "FAILOVER_NEGOTIATED",
# "data": { "device-id": "net1" },
# "timestamp": { "seconds": 1368697518, "microseconds": 326866 } }
##
{ 'event': 'FAILOVER_NEGOTIATED',
'data': {'device-id': 'str'} }
##
# @NETDEV_STREAM_CONNECTED:
#
# Emitted when the netdev stream backend is connected
#
# @netdev-id: QEMU netdev id that is connected
#
# @addr: The destination address
#
# Since: 7.2
#
# Examples:
#
# <- { "event": "NETDEV_STREAM_CONNECTED",
# "data": { "netdev-id": "netdev0",
# "addr": { "port": "47666", "ipv6": true,
# "host": "::1", "type": "inet" } },
# "timestamp": { "seconds": 1666269863, "microseconds": 311222 } }
#
# <- { "event": "NETDEV_STREAM_CONNECTED",
# "data": { "netdev-id": "netdev0",
# "addr": { "path": "/tmp/qemu0", "type": "unix" } },
# "timestamp": { "seconds": 1666269706, "microseconds": 413651 } }
##
{ 'event': 'NETDEV_STREAM_CONNECTED',
'data': { 'netdev-id': 'str',
'addr': 'SocketAddress' } }
##
# @NETDEV_STREAM_DISCONNECTED:
#
# Emitted when the netdev stream backend is disconnected
#
# @netdev-id: QEMU netdev id that is disconnected
#
# Since: 7.2
#
# Example:
#
# <- { 'event': 'NETDEV_STREAM_DISCONNECTED',
# 'data': {'netdev-id': 'netdev0'},
# 'timestamp': {'seconds': 1663330937, 'microseconds': 526695} }
##
{ 'event': 'NETDEV_STREAM_DISCONNECTED',
'data': { 'netdev-id': 'str' } }