qemu/roms
Gerd Hoffmann 21f5826a04 seabios: update to 1.8.0 release
'git shortlog 8936dbb2..4c59f5d8' for seabios repo:

David Woodhouse (4):
      Update EFI_COMPATIBILITY16_TABLE to match 0.98 spec update
      build: use -m16 where available instead of asm(".code16gcc")
      romlayout: Use .code16 not .code16gcc
      vgabios: Use .code16 not .code16gcc

Gerd Hoffmann (2):
      add scripts/tarball.sh
      build: set LC_ALL=C

Hannes Reinecke (1):
      megasas: read addional PCI I/O bar

Ian Campbell (1):
      romlayout: Use "rep ; nop" not "rep nop".

Kevin O'Connor (139):
      vgabios: Return from handle_1011() if handler found.
      edd: Move EDD get drive parameters (int 1348) logic from disk.c to block.c.
      edd: Use sectors==-1 to detect removable media.
      edd: Separate out ATA and virtio specific parts of fill_edd().
      cdemu: store internal cdemu fields in standard "el-torito" spec format.
      Move cdemu call interface and disk_ret helper code to disk.c.
      smm: Replace SMI assembler code with C code.
      smm: Use a C struct to define the layout of the SMM area.
      smp: Replace QEMU SMP init assembler code with C; run only in 32bit mode.
      Don't enable thread preemption during S3 resume vga option rom execution.
      Remove old Bochs bios fixed address string at 0xfff00.
      Move most of the VAR16FIXED() defs to misc.c.
      build: Avoid absolute paths during "whole-program" compiling.
      Make sure handle_smi() and handle_smp() are compiled out if not enabled.
      Remove the TODO file.
      Abstract reset call (and possible 16bit mode switch) into reset() function.
      build: Remove unused function getSectionsStart() from layoutrom.py.
      build: Extract section visiting logic in layoutrom.py.
      build: Refactor layoutrom.py gc() function.
      build: Use customized entry point for each type of build.
      build: Refactor findInit() function.
      build: Rework getRelocs() to use a hash instead of categories in layoutrom.py
      build: Keep segmented sections separate until final link step.
      build: Use fileid instead of category to write sections in layoutrom.py.
      build: Only export needed fields in LayoutInfo in layoutrom.py.
      build: Get fixed address variables from 32bit compile pass (not 16bit)
      build: Minor - fix comments referring to old tools/ directory.
      xhci: Update the times for usb command timeouts.
      ehci: Update usb command timeouts to use usb_xfer_time()
      uhci: Update usb command timeouts to use usb_xfer_time()
      ohci: Update usb command timeouts to use usb_xfer_time()
      vgabios: Fix broken build resulting from e5749978.
      boot: Change ":rom%d" boot order rom instance to ":rom%x"
      Minor - remove stray tab from src/fw/smm.c.
      build: Update kconfig to version in Linux 3.16.
      usb: Fix usb_xfer_time() to work when called in 16bit mode.
      xhci: Call usb_desc2pipe() on xhci_update_pipe().
      xhci: Remove 16bit code wrappers.
      xhci: Use high memory instead of low memory for internal storage.
      xhci: Move root hub and setup code to top of file.
      xhci: Add xhci_check_ports() and xhci_free_pipes() functions.
      ehci: Move port power up from ehci_hub_detect() to check_ehci_ports().
      usb-hub: Enable power to all ports prior to calling usb_enumerate().
      xhci: Change xhci_hub_detect() to use connect status instead of link state.
      uhci: Repeatedly poll for device detect for 100ms.
      ohci: Repeatedly poll for device detect for 100ms.
      ehci: Stall uhci/ohci init only until default port routing is done.
      usb: Perform device detect polling on all usb controllers.
      ehci: Fix bug in hub port assignment
      Revert "Use the extra stack for 16bit USB and PS2 keyboard/mouse commands."
      pmm: Fix entry point to support non-zero %ss
      Move stack hop code below call32/call16 code in stacks.c
      Add need_hop_back() call that determines if stack_hop_back is needed
      Update invoke_mouse_handler() to use need_hop_back()
      Update stack_hop_back() to jump to 16bit mode if called in 32bit mode.
      Track when entering via call32() and use the same mode for stack_hop_back()
      Simplify farcall16 code
      Update reset() to use call16_back()
      build: Support declaring 32bit C functions that must reside in the f-segment
      Move call16() functions from romlayout.S to inline assembler in stacks.c
      Break up call32() into call32() and call32_sloppy()
      Fully restore 16bit state during call16_sloppy()
      Implement call32 mechanism using SMIs.
      Move a20 code from system.c and ps2port.h to x86.h
      Backup and restore a20 on call32_sloppy()
      usb: Rename ?hci_control() to ?hci_send_control()
      usb: Rename usb_getFrameExp() to usb_get_period()
      usb: Rename findEndPointDesc() to usb_find_desc()
      usb: Rename send_default_control() to usb_send_default_control()
      usb: Rename free_pipe() to usb_free_pipe()
      usb: Clarify usb freelist manipulations
      xhci: Change xhci_update_pipe() to xhci_realloc_pipe() and use for alloc too
      uhci: Export uhci_realloc_pipe() instead of uhci_alloc_pipe()
      ohci: Export ohci_realloc_pipe() instead of ohci_alloc_pipe()
      ehci: Export ehci_realloc_pipe() instead of ehci_alloc_pipe()
      usb: Use usb_realloc_pipe for pipe alloc, update, and free.
      Use 32bit memcpy in int1587 when applicable
      Don't clobber %ax on ENTRY_INTO32 macro
      Create assembler macros for saving and restoring 'struct bregs'
      Do full BREGS backup/restore for pmm, pnp, and irqentry_extrastack
      Remove unused macro ENTRY_ST
      vgabios: Don't declare custom internal BDA storage in std/bda.h
      vgabios: Cache a pointer to the current mode struct in the BDA
      vgabios: Don't pass vmode_g to vgafb_move_chars() / vgafb_clear_chars()
      vgabios: Rename vbe_flags to flags
      vgabios: Set cursor shape fixes
      vgabios: Refactor get/set_cursor_shape() code
      vgabios: Only init BDA device details in init_bios_area()
      vgabios: Only set the dcc_index=8 if stdvga ports are available
      vgabios: Move standard table definitions to std/vga.h
      vgabios: Fill in available legacy modes in video_func_static at runtime
      vgabios: Add support for reading framebuffer in "direct" mode
      Fix PNP regression introduced in 99cb8f3e due to missed conversion
      Minor - move PORT_PS2_CTRLB from hw/ps2port.h to hw/timer.c
      vgabios: Support emulating text mode attributes while in graphics mode
      vgabios: Add software cursor capability
      Use an aligned stack offset when entering on the extra stack
      Minor - comment updates in romlayout.S
      Fix build issue on gcc34
      pciinit: Fix build warning in mch_pci_slot_get_irq()
      floppy: Make sure to yield() during floppy PIO
      Minor - be consistent in placement of .code16/32 in romlayout.S
      Use macros for .code16/32 mode switches in inline asm in stacks.c
      Eliminate FUNCFSEG - only force portions of inline asm to f-segment
      usb: Update USB hub code to support super speed hubs
      Simplify README files - point to online documentation instead
      sdcard: Initial support for SD cards on PCI SDHCI controllers on QEMU
      Add wiki documentation to repository
      docs: Don't point to repo README files
      docs: Add info on MODE16/MODESEGMENT compile time flags
      docs: Add page describing SeaBIOS final object linking
      scsi: Move cdb_* functions above scsi_* functions
      scsi: Move process_scsi_op() to hw/blockcmd.c and rename
      cdrom: call scsi_process_op() instead of cdb_read()
      scsi: Don't export cdb_* functions
      cdrom: Break up very large read requests into smaller requests
      block: Check for read/write requests over 64K
      usb: Add support for OHCI bulk transfers
      readserial: Enhance pipe support
      docs: Add documentation on using readserial.py script
      uhci: Enable "depth" tree traversal for bulk transfers
      uhci: Increase bulk transfer STACKTDS to 16
      vgabios: Support emulated text in gfx_read_char()
      ehci: No need to support td array wrapping
      ehci: Simplify fillTDbuffer() and rename
      ehci: Merge ehci_send_control with ehci_send_bulk
      ohci: Merge ohci_send_control with ohci_send_bulk
      uhci: Merge uhci_send_control with uhci_send_bulk
      xhci: Merge xhci_send_control with xhci_send_bulk
      usb: Use usb_send_pipe() now that all drivers have x_send_pipe()
      xhci: Move xhci_xfer_x() functions together
      xhci: Merge some xhci_xfer_x() functions into xhci_send_pipe()
      usb: Control transfers always have an 8 byte command size
      usb: Minor - properly free memory on get_device_config() error path
      checkstack: Handle callw instruction
      docs: Document why v1.6.3 release came after v0.6.2
      docs: Update release history with dates of stable releases
      docs: There is only one VAR16 flag now
      docs: Note v1.8.0 release

Marcel Apfelbaum (1):
      hw/pci: reserve IO and mem for pci express downstream ports with no devices attached

Markus Armbruster (1):
      boot: Fix boot order for SCSI target, lun > 9

Paolo Bonzini (5):
      piix: add and use dev-piix.h
      smm: complete SMM setup
      smm: unify SMM handlers
      vgabios: fix graphics operation with Bochs VGA in non-DISPI modes
      vgabios: implement read char in graphics mode

zhanghailiang (1):
      acpi: use specified macro instead of magic-number

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-19 09:33:03 +01:00
..
ipxe@35c5379760 update ipxe from 69313ed to 35c5379 2014-12-17 14:11:39 +01:00
openbios@038aa78d3c Update OpenBIOS images 2014-11-15 13:01:44 +00:00
openhackware@c559da7c8e prep: Update ppc_rom.bin 2014-07-07 16:46:35 +02:00
qemu-palcode@c87a92639b pc-bios: Update palcode-clipper 2013-07-18 08:17:42 -07:00
seabios@4c59f5d830 seabios: update to 1.8.0 release 2015-02-19 09:33:03 +01:00
sgabios@23d474943d add sgabios blob and submodule 2011-11-07 10:57:36 -06:00
SLOF@a70dbda2e2 pseries: Update SLOF firmware image to 20141202 2015-01-07 16:16:27 +01:00
u-boot@2072e72629 PPC: Add u-boot firmware for e500 2014-06-16 13:24:35 +02:00
vgabios@19ea12c230 Add new vgabios binaries to blobs list. 2010-11-16 08:39:52 -06:00
config.ipxe.general.h ipxe: update to current git 2014-05-15 14:24:05 +02:00
config.seabios-128k seabios: update to 1.8.0 release 2015-02-19 09:33:03 +01:00
config.seabios-256k roms: build two seabios binaries 2013-12-06 08:55:42 +01:00
config.vga-cirrus roms: enable parallel seabios / seavgabios builds 2013-09-30 09:44:35 +02:00
config.vga-isavga roms: enable parallel seabios / seavgabios builds 2013-09-30 09:44:35 +02:00
config.vga-qxl roms: enable parallel seabios / seavgabios builds 2013-09-30 09:44:35 +02:00
config.vga-stdvga roms: enable parallel seabios / seavgabios builds 2013-09-30 09:44:35 +02:00
config.vga-vmware roms: enable parallel seabios / seavgabios builds 2013-09-30 09:44:35 +02:00
configure-seabios.sh Revert "roms: switch oldnoconfig to olddefconfig" 2013-05-28 12:12:07 +02:00
Makefile PPC: Add u-boot firmware for e500 2014-06-16 13:24:35 +02:00