qemu/qga/qapi-schema.json
Markus Armbruster ca86608f7b qga/qapi-schema: Plug trivial documentation holes
Add missing return member documentation of guest-get-disks,
guest-get-devices, guest-get-diskstats, and guest-get-cpustats.

The NVMe SMART information returned by guest-getdisks remains
undocumented.  Add a TODO there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-10-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2024-02-12 10:04:31 +01:00

1808 lines
45 KiB
Python

# *-*- Mode: Python -*-*
# vim: filetype=python
##
# = General note concerning the use of guest agent interfaces
#
# "unsupported" is a higher-level error than the errors that
# individual commands might document. The caller should always be
# prepared to receive QERR_UNSUPPORTED, even if the given command
# doesn't specify it, or doesn't document any failure mode at all.
##
##
# = QEMU guest agent protocol commands and structs
##
{ 'pragma': { 'doc-required': true } }
# Lists with items allowed to permit QAPI rule violations; think twice
# before you add to them!
{ 'pragma': {
# Types whose member names may use '_'
'member-name-exceptions': [
'GuestAgentInfo'
],
# Commands allowed to return a non-dictionary:
'command-returns-exceptions': [
'guest-file-open',
'guest-fsfreeze-freeze',
'guest-fsfreeze-freeze-list',
'guest-fsfreeze-status',
'guest-fsfreeze-thaw',
'guest-get-time',
'guest-set-vcpus',
'guest-sync',
'guest-sync-delimited' ],
# Types and commands with undocumented members:
'documentation-exceptions': [
'GuestNVMeSmart' ] } }
##
# @guest-sync-delimited:
#
# Echo back a unique integer value, and prepend to response a leading
# sentinel byte (0xFF) the client can check scan for.
#
# This is used by clients talking to the guest agent over the wire to
# ensure the stream is in sync and doesn't contain stale data from
# previous client. It must be issued upon initial connection, and
# after any client-side timeouts (including timeouts on receiving a
# response to this command).
#
# After issuing this request, all guest agent responses should be
# ignored until the response containing the unique integer value the
# client passed in is returned. Receival of the 0xFF sentinel byte
# must be handled as an indication that the client's
# lexer/tokenizer/parser state should be flushed/reset in preparation
# for reliably receiving the subsequent response. As an optimization,
# clients may opt to ignore all data until a sentinel value is
# receiving to avoid unnecessary processing of stale data.
#
# Similarly, clients should also precede this *request* with a 0xFF
# byte to make sure the guest agent flushes any partially read JSON
# data from a previous client connection.
#
# @id: randomly generated 64-bit integer
#
# Returns: The unique integer id passed in by the client
#
# Since: 1.1
##
{ 'command': 'guest-sync-delimited',
'data': { 'id': 'int' },
'returns': 'int' }
##
# @guest-sync:
#
# Echo back a unique integer value
#
# This is used by clients talking to the guest agent over the wire to
# ensure the stream is in sync and doesn't contain stale data from
# previous client. All guest agent responses should be ignored until
# the provided unique integer value is returned, and it is up to the
# client to handle stale whole or partially-delivered JSON text in
# such a way that this response can be obtained.
#
# In cases where a partial stale response was previously received by
# the client, this cannot always be done reliably. One particular
# scenario being if qemu-ga responses are fed character-by-character
# into a JSON parser. In these situations, using guest-sync-delimited
# may be optimal.
#
# For clients that fetch responses line by line and convert them to
# JSON objects, guest-sync should be sufficient, but note that in
# cases where the channel is dirty some attempts at parsing the
# response may result in a parser error.
#
# Such clients should also precede this command with a 0xFF byte to
# make sure the guest agent flushes any partially read JSON data from
# a previous session.
#
# @id: randomly generated 64-bit integer
#
# Returns: The unique integer id passed in by the client
#
# Since: 0.15.0
##
{ 'command': 'guest-sync',
'data': { 'id': 'int' },
'returns': 'int' }
##
# @guest-ping:
#
# Ping the guest agent, a non-error return implies success
#
# Since: 0.15.0
##
{ 'command': 'guest-ping' }
##
# @guest-get-time:
#
# Get the information about guest's System Time relative to the Epoch
# of 1970-01-01 in UTC.
#
# Returns: Time in nanoseconds.
#
# Since: 1.5
##
{ 'command': 'guest-get-time',
'returns': 'int' }
##
# @guest-set-time:
#
# Set guest time.
#
# When a guest is paused or migrated to a file then loaded from that
# file, the guest OS has no idea that there was a big gap in the time.
# Depending on how long the gap was, NTP might not be able to
# resynchronize the guest.
#
# This command tries to set guest's System Time to the given value,
# then sets the Hardware Clock (RTC) to the current System Time. This
# will make it easier for a guest to resynchronize without waiting for
# NTP. If no @time is specified, then the time to set is read from
# RTC. However, this may not be supported on all platforms (i.e.
# Windows). If that's the case users are advised to always pass a
# value.
#
# @time: time of nanoseconds, relative to the Epoch of 1970-01-01 in
# UTC.
#
# Returns: Nothing on success.
#
# Since: 1.5
##
{ 'command': 'guest-set-time',
'data': { '*time': 'int' } }
##
# @GuestAgentCommandInfo:
#
# Information about guest agent commands.
#
# @name: name of the command
#
# @enabled: whether command is currently enabled by guest admin
#
# @success-response: whether command returns a response on success
# (since 1.7)
#
# Since: 1.1.0
##
{ 'struct': 'GuestAgentCommandInfo',
'data': { 'name': 'str', 'enabled': 'bool', 'success-response': 'bool' } }
##
# @GuestAgentInfo:
#
# Information about guest agent.
#
# @version: guest agent version
#
# @supported_commands: Information about guest agent commands
#
# Since: 0.15.0
##
{ 'struct': 'GuestAgentInfo',
'data': { 'version': 'str',
'supported_commands': ['GuestAgentCommandInfo'] } }
##
# @guest-info:
#
# Get some information about the guest agent.
#
# Returns: @GuestAgentInfo
#
# Since: 0.15.0
##
{ 'command': 'guest-info',
'returns': 'GuestAgentInfo' }
##
# @guest-shutdown:
#
# Initiate guest-activated shutdown. Note: this is an asynchronous
# shutdown request, with no guarantee of successful shutdown.
#
# @mode: "halt", "powerdown" (default), or "reboot"
#
# This command does NOT return a response on success. Success
# condition is indicated by the VM exiting with a zero exit status or,
# when running with --no-shutdown, by issuing the query-status QMP
# command to confirm the VM status is "shutdown".
#
# Since: 0.15.0
##
{ 'command': 'guest-shutdown', 'data': { '*mode': 'str' },
'success-response': false }
##
# @guest-file-open:
#
# Open a file in the guest and retrieve a file handle for it
#
# @path: Full path to the file in the guest to open.
#
# @mode: open mode, as per fopen(), "r" is the default.
#
# Returns: Guest file handle on success.
#
# Since: 0.15.0
##
{ 'command': 'guest-file-open',
'data': { 'path': 'str', '*mode': 'str' },
'returns': 'int' }
##
# @guest-file-close:
#
# Close an open file in the guest
#
# @handle: filehandle returned by guest-file-open
#
# Returns: Nothing on success.
#
# Since: 0.15.0
##
{ 'command': 'guest-file-close',
'data': { 'handle': 'int' } }
##
# @GuestFileRead:
#
# Result of guest agent file-read operation
#
# @count: number of bytes read (note: count is *before*
# base64-encoding is applied)
#
# @buf-b64: base64-encoded bytes read
#
# @eof: whether EOF was encountered during read operation.
#
# Since: 0.15.0
##
{ 'struct': 'GuestFileRead',
'data': { 'count': 'int', 'buf-b64': 'str', 'eof': 'bool' } }
##
# @guest-file-read:
#
# Read from an open file in the guest. Data will be base64-encoded.
# As this command is just for limited, ad-hoc debugging, such as log
# file access, the number of bytes to read is limited to 48 MB.
#
# @handle: filehandle returned by guest-file-open
#
# @count: maximum number of bytes to read (default is 4KB, maximum is
# 48MB)
#
# Returns: @GuestFileRead on success.
#
# Since: 0.15.0
##
{ 'command': 'guest-file-read',
'data': { 'handle': 'int', '*count': 'int' },
'returns': 'GuestFileRead' }
##
# @GuestFileWrite:
#
# Result of guest agent file-write operation
#
# @count: number of bytes written (note: count is actual bytes
# written, after base64-decoding of provided buffer)
#
# @eof: whether EOF was encountered during write operation.
#
# Since: 0.15.0
##
{ 'struct': 'GuestFileWrite',
'data': { 'count': 'int', 'eof': 'bool' } }
##
# @guest-file-write:
#
# Write to an open file in the guest.
#
# @handle: filehandle returned by guest-file-open
#
# @buf-b64: base64-encoded string representing data to be written
#
# @count: bytes to write (actual bytes, after base64-decode), default
# is all content in buf-b64 buffer after base64 decoding
#
# Returns: @GuestFileWrite on success.
#
# Since: 0.15.0
##
{ 'command': 'guest-file-write',
'data': { 'handle': 'int', 'buf-b64': 'str', '*count': 'int' },
'returns': 'GuestFileWrite' }
##
# @GuestFileSeek:
#
# Result of guest agent file-seek operation
#
# @position: current file position
#
# @eof: whether EOF was encountered during file seek
#
# Since: 0.15.0
##
{ 'struct': 'GuestFileSeek',
'data': { 'position': 'int', 'eof': 'bool' } }
##
# @QGASeek:
#
# Symbolic names for use in @guest-file-seek
#
# @set: Set to the specified offset (same effect as 'whence':0)
#
# @cur: Add offset to the current location (same effect as 'whence':1)
#
# @end: Add offset to the end of the file (same effect as 'whence':2)
#
# Since: 2.6
##
{ 'enum': 'QGASeek', 'data': [ 'set', 'cur', 'end' ] }
##
# @GuestFileWhence:
#
# Controls the meaning of offset to @guest-file-seek.
#
# @value: Integral value (0 for set, 1 for cur, 2 for end), available
# for historical reasons, and might differ from the host's or
# guest's SEEK_* values (since: 0.15)
#
# @name: Symbolic name, and preferred interface
#
# Since: 2.6
##
{ 'alternate': 'GuestFileWhence',
'data': { 'value': 'int', 'name': 'QGASeek' } }
##
# @guest-file-seek:
#
# Seek to a position in the file, as with fseek(), and return the
# current file position afterward. Also encapsulates ftell()'s
# functionality, with offset=0 and whence=1.
#
# @handle: filehandle returned by guest-file-open
#
# @offset: bytes to skip over in the file stream
#
# @whence: Symbolic or numeric code for interpreting offset
#
# Returns: @GuestFileSeek on success.
#
# Since: 0.15.0
##
{ 'command': 'guest-file-seek',
'data': { 'handle': 'int', 'offset': 'int',
'whence': 'GuestFileWhence' },
'returns': 'GuestFileSeek' }
##
# @guest-file-flush:
#
# Write file changes buffered in userspace to disk/kernel buffers
#
# @handle: filehandle returned by guest-file-open
#
# Returns: Nothing on success.
#
# Since: 0.15.0
##
{ 'command': 'guest-file-flush',
'data': { 'handle': 'int' } }
##
# @GuestFsfreezeStatus:
#
# An enumeration of filesystem freeze states
#
# @thawed: filesystems thawed/unfrozen
#
# @frozen: all non-network guest filesystems frozen
#
# Since: 0.15.0
##
{ 'enum': 'GuestFsfreezeStatus',
'data': [ 'thawed', 'frozen' ] }
##
# @guest-fsfreeze-status:
#
# Get guest fsfreeze state.
#
# Returns: GuestFsfreezeStatus ("thawed", "frozen", etc., as defined
# below)
#
# Note: This may fail to properly report the current state as a result
# of some other guest processes having issued an fs freeze/thaw.
#
# Since: 0.15.0
##
{ 'command': 'guest-fsfreeze-status',
'returns': 'GuestFsfreezeStatus' }
##
# @guest-fsfreeze-freeze:
#
# Sync and freeze all freezable, local guest filesystems. If this
# command succeeded, you may call @guest-fsfreeze-thaw later to
# unfreeze.
#
# Note: On Windows, the command is implemented with the help of a
# Volume Shadow-copy Service DLL helper. The frozen state is
# limited for up to 10 seconds by VSS.
#
# Returns: Number of file systems currently frozen. On error, all
# filesystems will be thawed. If no filesystems are frozen as a
# result of this call, then @guest-fsfreeze-status will remain
# "thawed" and calling @guest-fsfreeze-thaw is not necessary.
#
# Since: 0.15.0
##
{ 'command': 'guest-fsfreeze-freeze',
'returns': 'int' }
##
# @guest-fsfreeze-freeze-list:
#
# Sync and freeze specified guest filesystems. See also
# @guest-fsfreeze-freeze.
#
# @mountpoints: an array of mountpoints of filesystems to be frozen.
# If omitted, every mounted filesystem is frozen. Invalid mount
# points are ignored.
#
# Returns: Number of file systems currently frozen. On error, all
# filesystems will be thawed.
#
# Since: 2.2
##
{ 'command': 'guest-fsfreeze-freeze-list',
'data': { '*mountpoints': ['str'] },
'returns': 'int' }
##
# @guest-fsfreeze-thaw:
#
# Unfreeze all frozen guest filesystems
#
# Returns: Number of file systems thawed by this call
#
# Note: if return value does not match the previous call to
# guest-fsfreeze-freeze, this likely means some freezable
# filesystems were unfrozen before this call, and that the
# filesystem state may have changed before issuing this command.
#
# Since: 0.15.0
##
{ 'command': 'guest-fsfreeze-thaw',
'returns': 'int' }
##
# @GuestFilesystemTrimResult:
#
# @path: path that was trimmed
#
# @error: an error message when trim failed
#
# @trimmed: bytes trimmed for this path
#
# @minimum: reported effective minimum for this path
#
# Since: 2.4
##
{ 'struct': 'GuestFilesystemTrimResult',
'data': {'path': 'str',
'*trimmed': 'int', '*minimum': 'int', '*error': 'str'} }
##
# @GuestFilesystemTrimResponse:
#
# @paths: list of @GuestFilesystemTrimResult per path that was trimmed
#
# Since: 2.4
##
{ 'struct': 'GuestFilesystemTrimResponse',
'data': {'paths': ['GuestFilesystemTrimResult']} }
##
# @guest-fstrim:
#
# Discard (or "trim") blocks which are not in use by the filesystem.
#
# @minimum: Minimum contiguous free range to discard, in bytes. Free
# ranges smaller than this may be ignored (this is a hint and the
# guest may not respect it). By increasing this value, the fstrim
# operation will complete more quickly for filesystems with badly
# fragmented free space, although not all blocks will be
# discarded. The default value is zero, meaning "discard every
# free block".
#
# Returns: A @GuestFilesystemTrimResponse which contains the status of
# all trimmed paths. (since 2.4)
#
# Since: 1.2
##
{ 'command': 'guest-fstrim',
'data': { '*minimum': 'int' },
'returns': 'GuestFilesystemTrimResponse' }
##
# @guest-suspend-disk:
#
# Suspend guest to disk.
#
# This command attempts to suspend the guest using three strategies,
# in this order:
#
# - systemd hibernate
# - pm-utils (via pm-hibernate)
# - manual write into sysfs
#
# This command does NOT return a response on success. There is a high
# chance the command succeeded if the VM exits with a zero exit status
# or, when running with --no-shutdown, by issuing the query-status QMP
# command to to confirm the VM status is "shutdown". However, the VM
# could also exit (or set its status to "shutdown") due to other
# reasons.
#
# The following errors may be returned:
#
# - If suspend to disk is not supported, Unsupported
#
# Notes: It's strongly recommended to issue the guest-sync command
# before sending commands when the guest resumes
#
# Since: 1.1
##
{ 'command': 'guest-suspend-disk', 'success-response': false }
##
# @guest-suspend-ram:
#
# Suspend guest to ram.
#
# This command attempts to suspend the guest using three strategies,
# in this order:
#
# - systemd hibernate
# - pm-utils (via pm-hibernate)
# - manual write into sysfs
#
# IMPORTANT: guest-suspend-ram requires working wakeup support in
# QEMU. You should check QMP command query-current-machine returns
# wakeup-suspend-support: true before issuing this command. Failure
# in doing so can result in a suspended guest that QEMU will not be
# able to awaken, forcing the user to power cycle the guest to bring
# it back.
#
# This command does NOT return a response on success. There are two
# options to check for success:
#
# 1. Wait for the SUSPEND QMP event from QEMU
# 2. Issue the query-status QMP command to confirm the VM status is
# "suspended"
#
# The following errors may be returned:
#
# - If suspend to ram is not supported, Unsupported
#
# Notes: It's strongly recommended to issue the guest-sync command
# before sending commands when the guest resumes
#
# Since: 1.1
##
{ 'command': 'guest-suspend-ram', 'success-response': false }
##
# @guest-suspend-hybrid:
#
# Save guest state to disk and suspend to ram.
#
# This command attempts to suspend the guest by executing, in this
# order:
#
# - systemd hybrid-sleep
# - pm-utils (via pm-suspend-hybrid)
#
# IMPORTANT: guest-suspend-hybrid requires working wakeup support in
# QEMU. You should check QMP command query-current-machine returns
# wakeup-suspend-support: true before issuing this command. Failure
# in doing so can result in a suspended guest that QEMU will not be
# able to awaken, forcing the user to power cycle the guest to bring
# it back.
#
# This command does NOT return a response on success. There are two
# options to check for success:
#
# 1. Wait for the SUSPEND QMP event from QEMU
# 2. Issue the query-status QMP command to confirm the VM status is
# "suspended"
#
# The following errors may be returned:
#
# - If hybrid suspend is not supported, Unsupported
#
# Notes: It's strongly recommended to issue the guest-sync command
# before sending commands when the guest resumes
#
# Since: 1.1
##
{ 'command': 'guest-suspend-hybrid', 'success-response': false }
##
# @GuestIpAddressType:
#
# An enumeration of supported IP address types
#
# @ipv4: IP version 4
#
# @ipv6: IP version 6
#
# Since: 1.1
##
{ 'enum': 'GuestIpAddressType',
'data': [ 'ipv4', 'ipv6' ] }
##
# @GuestIpAddress:
#
# @ip-address: IP address
#
# @ip-address-type: Type of @ip-address (e.g. ipv4, ipv6)
#
# @prefix: Network prefix length of @ip-address
#
# Since: 1.1
##
{ 'struct': 'GuestIpAddress',
'data': {'ip-address': 'str',
'ip-address-type': 'GuestIpAddressType',
'prefix': 'int'} }
##
# @GuestNetworkInterfaceStat:
#
# @rx-bytes: total bytes received
#
# @rx-packets: total packets received
#
# @rx-errs: bad packets received
#
# @rx-dropped: receiver dropped packets
#
# @tx-bytes: total bytes transmitted
#
# @tx-packets: total packets transmitted
#
# @tx-errs: packet transmit problems
#
# @tx-dropped: dropped packets transmitted
#
# Since: 2.11
##
{ 'struct': 'GuestNetworkInterfaceStat',
'data': {'rx-bytes': 'uint64',
'rx-packets': 'uint64',
'rx-errs': 'uint64',
'rx-dropped': 'uint64',
'tx-bytes': 'uint64',
'tx-packets': 'uint64',
'tx-errs': 'uint64',
'tx-dropped': 'uint64'
} }
##
# @GuestNetworkInterface:
#
# @name: The name of interface for which info are being delivered
#
# @hardware-address: Hardware address of @name
#
# @ip-addresses: List of addresses assigned to @name
#
# @statistics: various statistic counters related to @name (since
# 2.11)
#
# Since: 1.1
##
{ 'struct': 'GuestNetworkInterface',
'data': {'name': 'str',
'*hardware-address': 'str',
'*ip-addresses': ['GuestIpAddress'],
'*statistics': 'GuestNetworkInterfaceStat' } }
##
# @guest-network-get-interfaces:
#
# Get list of guest IP addresses, MAC addresses and netmasks.
#
# Returns: List of GuestNetworkInterface on success.
#
# Since: 1.1
##
{ 'command': 'guest-network-get-interfaces',
'returns': ['GuestNetworkInterface'] }
##
# @GuestLogicalProcessor:
#
# @logical-id: Arbitrary guest-specific unique identifier of the VCPU.
#
# @online: Whether the VCPU is enabled.
#
# @can-offline: Whether offlining the VCPU is possible. This member
# is always filled in by the guest agent when the structure is
# returned, and always ignored on input (hence it can be omitted
# then).
#
# Since: 1.5
##
{ 'struct': 'GuestLogicalProcessor',
'data': {'logical-id': 'int',
'online': 'bool',
'*can-offline': 'bool'} }
##
# @guest-get-vcpus:
#
# Retrieve the list of the guest's logical processors.
#
# This is a read-only operation.
#
# Returns: The list of all VCPUs the guest knows about. Each VCPU is
# put on the list exactly once, but their order is unspecified.
#
# Since: 1.5
##
{ 'command': 'guest-get-vcpus',
'returns': ['GuestLogicalProcessor'] }
##
# @guest-set-vcpus:
#
# Attempt to reconfigure (currently: enable/disable) logical
# processors inside the guest.
#
# @vcpus: The logical processors to be reconfigured. This list is
# processed node by node in order. In each node @logical-id is
# used to look up the guest VCPU, for which @online specifies the
# requested state. The set of distinct @logical-id's is only
# required to be a subset of the guest-supported identifiers.
# There's no restriction on list length or on repeating the same
# @logical-id (with possibly different @online field). Preferably
# the input list should describe a modified subset of
# @guest-get-vcpus' return value.
#
# Returns: The length of the initial sublist that has been
# successfully processed. The guest agent maximizes this value.
# Possible cases:
#
# - 0:
# if the @vcpus list was empty on input. Guest state has not
# been changed. Otherwise,
# - Error:
# processing the first node of @vcpus failed for the reason
# returned. Guest state has not been changed. Otherwise,
# - < length(@vcpus):
# more than zero initial nodes have been processed, but not the
# entire @vcpus list. Guest state has changed accordingly. To
# retrieve the error (assuming it persists), repeat the call
# with the successfully processed initial sublist removed.
# Otherwise,
# - length(@vcpus):
# call successful.
#
# Since: 1.5
##
{ 'command': 'guest-set-vcpus',
'data': {'vcpus': ['GuestLogicalProcessor'] },
'returns': 'int' }
##
# @GuestDiskBusType:
#
# An enumeration of bus type of disks
#
# @ide: IDE disks
#
# @fdc: floppy disks
#
# @scsi: SCSI disks
#
# @virtio: virtio disks
#
# @xen: Xen disks
#
# @usb: USB disks
#
# @uml: UML disks
#
# @sata: SATA disks
#
# @sd: SD cards
#
# @unknown: Unknown bus type
#
# @ieee1394: Win IEEE 1394 bus type
#
# @ssa: Win SSA bus type
#
# @fibre: Win fiber channel bus type
#
# @raid: Win RAID bus type
#
# @iscsi: Win iScsi bus type
#
# @sas: Win serial-attaches SCSI bus type
#
# @mmc: Win multimedia card (MMC) bus type
#
# @virtual: Win virtual bus type
#
# @file-backed-virtual: Win file-backed bus type
#
# @nvme: NVMe disks (since 7.1)
#
# Since: 2.2; 'Unknown' and all entries below since 2.4
##
{ 'enum': 'GuestDiskBusType',
'data': [ 'ide', 'fdc', 'scsi', 'virtio', 'xen', 'usb', 'uml', 'sata',
'sd', 'unknown', 'ieee1394', 'ssa', 'fibre', 'raid', 'iscsi',
'sas', 'mmc', 'virtual', 'file-backed-virtual', 'nvme' ] }
##
# @GuestPCIAddress:
#
# @domain: domain id
#
# @bus: bus id
#
# @slot: slot id
#
# @function: function id
#
# Since: 2.2
##
{ 'struct': 'GuestPCIAddress',
'data': {'domain': 'int', 'bus': 'int',
'slot': 'int', 'function': 'int'} }
##
# @GuestCCWAddress:
#
# @cssid: channel subsystem image id
#
# @ssid: subchannel set id
#
# @subchno: subchannel number
#
# @devno: device number
#
# Since: 6.0
##
{ 'struct': 'GuestCCWAddress',
'data': {'cssid': 'int',
'ssid': 'int',
'subchno': 'int',
'devno': 'int'} }
##
# @GuestDiskAddress:
#
# @pci-controller: controller's PCI address (fields are set to -1 if
# invalid)
#
# @bus-type: bus type
#
# @bus: bus id
#
# @target: target id
#
# @unit: unit id
#
# @serial: serial number (since: 3.1)
#
# @dev: device node (POSIX) or device UNC (Windows) (since: 3.1)
#
# @ccw-address: CCW address on s390x (since: 6.0)
#
# Since: 2.2
##
{ 'struct': 'GuestDiskAddress',
'data': {'pci-controller': 'GuestPCIAddress',
'bus-type': 'GuestDiskBusType',
'bus': 'int', 'target': 'int', 'unit': 'int',
'*serial': 'str', '*dev': 'str',
'*ccw-address': 'GuestCCWAddress'} }
##
# @GuestNVMeSmart:
#
# NVMe smart information, based on NVMe specification, section
# <SMART / Health Information (Log Identifier 02h)>
#
# TODO: document members briefly
#
# Since: 7.1
##
{ 'struct': 'GuestNVMeSmart',
'data': {'critical-warning': 'int',
'temperature': 'int',
'available-spare': 'int',
'available-spare-threshold': 'int',
'percentage-used': 'int',
'data-units-read-lo': 'uint64',
'data-units-read-hi': 'uint64',
'data-units-written-lo': 'uint64',
'data-units-written-hi': 'uint64',
'host-read-commands-lo': 'uint64',
'host-read-commands-hi': 'uint64',
'host-write-commands-lo': 'uint64',
'host-write-commands-hi': 'uint64',
'controller-busy-time-lo': 'uint64',
'controller-busy-time-hi': 'uint64',
'power-cycles-lo': 'uint64',
'power-cycles-hi': 'uint64',
'power-on-hours-lo': 'uint64',
'power-on-hours-hi': 'uint64',
'unsafe-shutdowns-lo': 'uint64',
'unsafe-shutdowns-hi': 'uint64',
'media-errors-lo': 'uint64',
'media-errors-hi': 'uint64',
'number-of-error-log-entries-lo': 'uint64',
'number-of-error-log-entries-hi': 'uint64' } }
##
# @GuestDiskSmart:
#
# Disk type related smart information.
#
# @type: disk bus type
#
# Since: 7.1
##
{ 'union': 'GuestDiskSmart',
'base': { 'type': 'GuestDiskBusType' },
'discriminator': 'type',
'data': { 'nvme': 'GuestNVMeSmart' } }
##
# @GuestDiskInfo:
#
# @name: device node (Linux) or device UNC (Windows)
#
# @partition: whether this is a partition or disk
#
# @dependencies: list of device dependencies; e.g. for LVs of the LVM
# this will hold the list of PVs, for LUKS encrypted volume this
# will contain the disk where the volume is placed. (Linux)
#
# @address: disk address information (only for non-virtual devices)
#
# @alias: optional alias assigned to the disk, on Linux this is a name
# assigned by device mapper
#
# @smart: disk smart information (Since 7.1)
#
# Since: 5.2
##
{ 'struct': 'GuestDiskInfo',
'data': {'name': 'str', 'partition': 'bool', '*dependencies': ['str'],
'*address': 'GuestDiskAddress', '*alias': 'str',
'*smart': 'GuestDiskSmart'} }
##
# @guest-get-disks:
#
# Returns: The list of disks in the guest. For Windows these are only
# the physical disks. On Linux these are all root block devices
# of non-zero size including e.g. removable devices, loop devices,
# NBD, etc.
#
# Since: 5.2
##
{ 'command': 'guest-get-disks',
'returns': ['GuestDiskInfo'] }
##
# @GuestFilesystemInfo:
#
# @name: disk name
#
# @mountpoint: mount point path
#
# @type: file system type string
#
# @used-bytes: file system used bytes (since 3.0)
#
# @total-bytes: non-root file system total bytes (since 3.0)
#
# @disk: an array of disk hardware information that the volume lies
# on, which may be empty if the disk type is not supported
#
# Since: 2.2
##
{ 'struct': 'GuestFilesystemInfo',
'data': {'name': 'str', 'mountpoint': 'str', 'type': 'str',
'*used-bytes': 'uint64', '*total-bytes': 'uint64',
'disk': ['GuestDiskAddress']} }
##
# @guest-get-fsinfo:
#
# Returns: The list of filesystems information mounted in the guest.
# The returned mountpoints may be specified to
# @guest-fsfreeze-freeze-list. Network filesystems (such as CIFS
# and NFS) are not listed.
#
# Since: 2.2
##
{ 'command': 'guest-get-fsinfo',
'returns': ['GuestFilesystemInfo'] }
##
# @guest-set-user-password:
#
# @username: the user account whose password to change
#
# @password: the new password entry string, base64 encoded
#
# @crypted: true if password is already crypt()d, false if raw
#
# If the @crypted flag is true, it is the caller's responsibility to
# ensure the correct crypt() encryption scheme is used. This command
# does not attempt to interpret or report on the encryption scheme.
# Refer to the documentation of the guest operating system in question
# to determine what is supported.
#
# Not all guest operating systems will support use of the @crypted
# flag, as they may require the clear-text password
#
# The @password parameter must always be base64 encoded before
# transmission, even if already crypt()d, to ensure it is 8-bit safe
# when passed as JSON.
#
# Returns: Nothing on success.
#
# Since: 2.3
##
{ 'command': 'guest-set-user-password',
'data': { 'username': 'str', 'password': 'str', 'crypted': 'bool' } }
##
# @GuestMemoryBlock:
#
# @phys-index: Arbitrary guest-specific unique identifier of the
# MEMORY BLOCK.
#
# @online: Whether the MEMORY BLOCK is enabled in guest.
#
# @can-offline: Whether offlining the MEMORY BLOCK is possible. This
# member is always filled in by the guest agent when the structure
# is returned, and always ignored on input (hence it can be
# omitted then).
#
# Since: 2.3
##
{ 'struct': 'GuestMemoryBlock',
'data': {'phys-index': 'uint64',
'online': 'bool',
'*can-offline': 'bool'} }
##
# @guest-get-memory-blocks:
#
# Retrieve the list of the guest's memory blocks.
#
# This is a read-only operation.
#
# Returns: The list of all memory blocks the guest knows about. Each
# memory block is put on the list exactly once, but their order is
# unspecified.
#
# Since: 2.3
##
{ 'command': 'guest-get-memory-blocks',
'returns': ['GuestMemoryBlock'] }
##
# @GuestMemoryBlockResponseType:
#
# An enumeration of memory block operation result.
#
# @success: the operation of online/offline memory block is
# successful.
#
# @not-found: can't find the corresponding memoryXXX directory in
# sysfs.
#
# @operation-not-supported: for some old kernels, it does not support
# online or offline memory block.
#
# @operation-failed: the operation of online/offline memory block
# fails, because of some errors happen.
#
# Since: 2.3
##
{ 'enum': 'GuestMemoryBlockResponseType',
'data': ['success', 'not-found', 'operation-not-supported',
'operation-failed'] }
##
# @GuestMemoryBlockResponse:
#
# @phys-index: same with the 'phys-index' member of @GuestMemoryBlock.
#
# @response: the result of memory block operation.
#
# @error-code: the error number. When memory block operation fails,
# we assign the value of 'errno' to this member, it indicates what
# goes wrong. When the operation succeeds, it will be omitted.
#
# Since: 2.3
##
{ 'struct': 'GuestMemoryBlockResponse',
'data': { 'phys-index': 'uint64',
'response': 'GuestMemoryBlockResponseType',
'*error-code': 'int' }}
##
# @guest-set-memory-blocks:
#
# Attempt to reconfigure (currently: enable/disable) state of memory
# blocks inside the guest.
#
# @mem-blks: The memory blocks to be reconfigured. This list is
# processed node by node in order. In each node @phys-index is
# used to look up the guest MEMORY BLOCK, for which @online
# specifies the requested state. The set of distinct
# @phys-index's is only required to be a subset of the
# guest-supported identifiers. There's no restriction on list
# length or on repeating the same @phys-index (with possibly
# different @online field). Preferably the input list should
# describe a modified subset of @guest-get-memory-blocks' return
# value.
#
# Returns: The operation results, it is a list of
# @GuestMemoryBlockResponse, which is corresponding to the input
# list.
#
# Note: it will return NULL if the @mem-blks list was empty on
# input, or there is an error, and in this case, guest state will
# not be changed.
#
# Since: 2.3
##
{ 'command': 'guest-set-memory-blocks',
'data': {'mem-blks': ['GuestMemoryBlock'] },
'returns': ['GuestMemoryBlockResponse'] }
##
# @GuestMemoryBlockInfo:
#
# @size: the size (in bytes) of the guest memory blocks, which are the
# minimal units of memory block online/offline operations (also
# called Logical Memory Hotplug).
#
# Since: 2.3
##
{ 'struct': 'GuestMemoryBlockInfo',
'data': {'size': 'uint64'} }
##
# @guest-get-memory-block-info:
#
# Get information relating to guest memory blocks.
#
# Returns: @GuestMemoryBlockInfo
#
# Since: 2.3
##
{ 'command': 'guest-get-memory-block-info',
'returns': 'GuestMemoryBlockInfo' }
##
# @GuestExecStatus:
#
# @exited: true if process has already terminated.
#
# @exitcode: process exit code if it was normally terminated.
#
# @signal: signal number (linux) or unhandled exception code (windows)
# if the process was abnormally terminated.
#
# @out-data: base64-encoded stdout of the process. This field will only
# be populated after the process exits.
#
# @err-data: base64-encoded stderr of the process. Note: @out-data and
# @err-data are present only if 'capture-output' was specified for
# 'guest-exec'. This field will only be populated after the process
# exits.
#
# @out-truncated: true if stdout was not fully captured due to size
# limitation.
#
# @err-truncated: true if stderr was not fully captured due to size
# limitation.
#
# Since: 2.5
##
{ 'struct': 'GuestExecStatus',
'data': { 'exited': 'bool', '*exitcode': 'int', '*signal': 'int',
'*out-data': 'str', '*err-data': 'str',
'*out-truncated': 'bool', '*err-truncated': 'bool' }}
##
# @guest-exec-status:
#
# Check status of process associated with PID retrieved via
# guest-exec. Reap the process and associated metadata if it has
# exited.
#
# @pid: pid returned from guest-exec
#
# Returns: GuestExecStatus on success.
#
# Since: 2.5
##
{ 'command': 'guest-exec-status',
'data': { 'pid': 'int' },
'returns': 'GuestExecStatus' }
##
# @GuestExec:
#
# @pid: pid of child process in guest OS
#
# Since: 2.5
##
{ 'struct': 'GuestExec',
'data': { 'pid': 'int'} }
##
# @GuestExecCaptureOutputMode:
#
# An enumeration of guest-exec capture modes.
#
# @none: do not capture any output
# @stdout: only capture stdout
# @stderr: only capture stderr
# @separated: capture both stdout and stderr, but separated into
# GuestExecStatus out-data and err-data, respectively
# @merged: capture both stdout and stderr, but merge together
# into out-data. not effective on windows guests.
#
# Since: 8.0
##
{ 'enum': 'GuestExecCaptureOutputMode',
'data': [ 'none', 'stdout', 'stderr', 'separated',
{ 'name': 'merged', 'if': { 'not': 'CONFIG_WIN32' } } ] }
##
# @GuestExecCaptureOutput:
#
# Controls what guest-exec output gets captures.
#
# @flag: captures both stdout and stderr if true. Equivalent
# to GuestExecCaptureOutputMode::all. (since 2.5)
# @mode: capture mode; preferred interface
#
# Since: 8.0
##
{ 'alternate': 'GuestExecCaptureOutput',
'data': { 'flag': 'bool',
'mode': 'GuestExecCaptureOutputMode'} }
##
# @guest-exec:
#
# Execute a command in the guest
#
# @path: path or executable name to execute
#
# @arg: argument list to pass to executable
#
# @env: environment variables to pass to executable
#
# @input-data: data to be passed to process stdin (base64 encoded)
#
# @capture-output: bool flag to enable capture of stdout/stderr of
# running process. defaults to false.
#
# Returns: PID on success.
#
# Since: 2.5
##
{ 'command': 'guest-exec',
'data': { 'path': 'str', '*arg': ['str'], '*env': ['str'],
'*input-data': 'str', '*capture-output': 'GuestExecCaptureOutput' },
'returns': 'GuestExec' }
##
# @GuestHostName:
#
# @host-name: Fully qualified domain name of the guest OS
#
# Since: 2.10
##
{ 'struct': 'GuestHostName',
'data': { 'host-name': 'str' } }
##
# @guest-get-host-name:
#
# Return a name for the machine.
#
# The returned name is not necessarily a fully-qualified domain name,
# or even present in DNS or some other name service at all. It need
# not even be unique on your local network or site, but usually it is.
#
# Returns: the host name of the machine on success
#
# Since: 2.10
##
{ 'command': 'guest-get-host-name',
'returns': 'GuestHostName' }
##
# @GuestUser:
#
# @user: Username
#
# @domain: Logon domain (windows only)
#
# @login-time: Time of login of this user on the computer. If
# multiple instances of the user are logged in, the earliest login
# time is reported. The value is in fractional seconds since
# epoch time.
#
# Since: 2.10
##
{ 'struct': 'GuestUser',
'data': { 'user': 'str', 'login-time': 'number', '*domain': 'str' } }
##
# @guest-get-users:
#
# Retrieves a list of currently active users on the VM.
#
# Returns: A unique list of users.
#
# Since: 2.10
##
{ 'command': 'guest-get-users',
'returns': ['GuestUser'] }
##
# @GuestTimezone:
#
# @zone: Timezone name. These values may differ depending on guest/OS
# and should only be used for informational purposes.
#
# @offset: Offset to UTC in seconds, negative numbers for time zones
# west of GMT, positive numbers for east
#
# Since: 2.10
##
{ 'struct': 'GuestTimezone',
'data': { '*zone': 'str', 'offset': 'int' } }
##
# @guest-get-timezone:
#
# Retrieves the timezone information from the guest.
#
# Returns: A GuestTimezone dictionary.
#
# Since: 2.10
##
{ 'command': 'guest-get-timezone',
'returns': 'GuestTimezone' }
##
# @GuestOSInfo:
#
# @kernel-release:
# * POSIX: release field returned by uname(2)
# * Windows: build number of the OS
#
# @kernel-version:
# * POSIX: version field returned by uname(2)
# * Windows: version number of the OS
#
# @machine:
# * POSIX: machine field returned by uname(2)
# * Windows: one of x86, x86_64, arm, ia64
#
# @id:
# * POSIX: as defined by os-release(5)
# * Windows: contains string "mswindows"
#
# @name:
# * POSIX: as defined by os-release(5)
# * Windows: contains string "Microsoft Windows"
#
# @pretty-name:
# * POSIX: as defined by os-release(5)
# * Windows: product name, e.g. "Microsoft Windows 10 Enterprise"
#
# @version:
# * POSIX: as defined by os-release(5)
# * Windows: long version string, e.g. "Microsoft Windows Server
# 2008"
#
# @version-id:
# * POSIX: as defined by os-release(5)
# * Windows: short version identifier, e.g. "7" or "20012r2"
#
# @variant:
# * POSIX: as defined by os-release(5)
# * Windows: contains string "server" or "client"
#
# @variant-id:
# * POSIX: as defined by os-release(5)
# * Windows: contains string "server" or "client"
#
# Notes: On POSIX systems the fields @id, @name, @pretty-name,
# @version, @version-id, @variant and @variant-id follow the
# definition specified in os-release(5). Refer to the manual page
# for exact description of the fields. Their values are taken
# from the os-release file. If the file is not present in the
# system, or the values are not present in the file, the fields
# are not included.
#
# On Windows the values are filled from information gathered from
# the system.
#
# Since: 2.10
##
{ 'struct': 'GuestOSInfo',
'data': {
'*kernel-release': 'str', '*kernel-version': 'str',
'*machine': 'str', '*id': 'str', '*name': 'str',
'*pretty-name': 'str', '*version': 'str', '*version-id': 'str',
'*variant': 'str', '*variant-id': 'str' } }
##
# @guest-get-osinfo:
#
# Retrieve guest operating system information
#
# Returns: @GuestOSInfo
#
# Since: 2.10
##
{ 'command': 'guest-get-osinfo',
'returns': 'GuestOSInfo' }
##
# @GuestDeviceType:
#
# @pci: PCI device
##
{ 'enum': 'GuestDeviceType',
'data': [ 'pci' ] }
##
# @GuestDeviceIdPCI:
#
# @vendor-id: vendor ID
#
# @device-id: device ID
#
# Since: 5.2
##
{ 'struct': 'GuestDeviceIdPCI',
'data': { 'vendor-id': 'uint16', 'device-id': 'uint16' } }
##
# @GuestDeviceId:
#
# Id of the device
#
# @type: device type
#
# Since: 5.2
##
{ 'union': 'GuestDeviceId',
'base': { 'type': 'GuestDeviceType' },
'discriminator': 'type',
'data': { 'pci': 'GuestDeviceIdPCI' } }
##
# @GuestDeviceInfo:
#
# @driver-name: name of the associated driver
#
# @driver-date: driver release date, in nanoseconds since the epoch
#
# @driver-version: driver version
#
# @id: device ID
#
# Since: 5.2
##
{ 'struct': 'GuestDeviceInfo',
'data': {
'driver-name': 'str',
'*driver-date': 'int',
'*driver-version': 'str',
'*id': 'GuestDeviceId'
} }
##
# @guest-get-devices:
#
# Retrieve information about device drivers in Windows guest
#
# Returns: @GuestDeviceInfo
#
# Since: 5.2
##
{ 'command': 'guest-get-devices',
'returns': ['GuestDeviceInfo'] }
##
# @GuestAuthorizedKeys:
#
# @keys: public keys (in OpenSSH/sshd(8) authorized_keys format)
#
# Since: 5.2
##
{ 'struct': 'GuestAuthorizedKeys',
'data': {
'keys': ['str']
},
'if': 'CONFIG_POSIX' }
##
# @guest-ssh-get-authorized-keys:
#
# Return the public keys from user .ssh/authorized_keys on Unix
# systems (not implemented for other systems).
#
# @username: the user account to add the authorized keys
#
# Returns: @GuestAuthorizedKeys
#
# Since: 5.2
##
{ 'command': 'guest-ssh-get-authorized-keys',
'data': { 'username': 'str' },
'returns': 'GuestAuthorizedKeys',
'if': 'CONFIG_POSIX' }
##
# @guest-ssh-add-authorized-keys:
#
# Append public keys to user .ssh/authorized_keys on Unix systems (not
# implemented for other systems).
#
# @username: the user account to add the authorized keys
#
# @keys: the public keys to add (in OpenSSH/sshd(8) authorized_keys
# format)
#
# @reset: ignore the existing content, set it with the given keys only
#
# Returns: Nothing on success.
#
# Since: 5.2
##
{ 'command': 'guest-ssh-add-authorized-keys',
'data': { 'username': 'str', 'keys': ['str'], '*reset': 'bool' },
'if': 'CONFIG_POSIX' }
##
# @guest-ssh-remove-authorized-keys:
#
# Remove public keys from the user .ssh/authorized_keys on Unix
# systems (not implemented for other systems). It's not an error if
# the key is already missing.
#
# @username: the user account to remove the authorized keys
#
# @keys: the public keys to remove (in OpenSSH/sshd(8) authorized_keys
# format)
#
# Returns: Nothing on success.
#
# Since: 5.2
##
{ 'command': 'guest-ssh-remove-authorized-keys',
'data': { 'username': 'str', 'keys': ['str'] },
'if': 'CONFIG_POSIX' }
##
# @GuestDiskStats:
#
# @read-sectors: sectors read
#
# @read-ios: reads completed successfully
#
# @read-merges: read requests merged
#
# @write-sectors: sectors written
#
# @write-ios: writes completed
#
# @write-merges: write requests merged
#
# @discard-sectors: sectors discarded
#
# @discard-ios: discards completed successfully
#
# @discard-merges: discard requests merged
#
# @flush-ios: flush requests completed successfully
#
# @read-ticks: time spent reading(ms)
#
# @write-ticks: time spent writing(ms)
#
# @discard-ticks: time spent discarding(ms)
#
# @flush-ticks: time spent flushing(ms)
#
# @ios-pgr: number of I/Os currently in flight
#
# @total-ticks: time spent doing I/Os (ms)
#
# @weight-ticks: weighted time spent doing I/Os since the last update
# of this field(ms)
#
# Since: 7.1
##
{ 'struct': 'GuestDiskStats',
'data': {'*read-sectors': 'uint64',
'*read-ios': 'uint64',
'*read-merges': 'uint64',
'*write-sectors': 'uint64',
'*write-ios': 'uint64',
'*write-merges': 'uint64',
'*discard-sectors': 'uint64',
'*discard-ios': 'uint64',
'*discard-merges': 'uint64',
'*flush-ios': 'uint64',
'*read-ticks': 'uint64',
'*write-ticks': 'uint64',
'*discard-ticks': 'uint64',
'*flush-ticks': 'uint64',
'*ios-pgr': 'uint64',
'*total-ticks': 'uint64',
'*weight-ticks': 'uint64'
} }
##
# @GuestDiskStatsInfo:
#
# @name: disk name
#
# @major: major device number of disk
#
# @minor: minor device number of disk
#
# @stats: I/O statistics
##
{ 'struct': 'GuestDiskStatsInfo',
'data': {'name': 'str',
'major': 'uint64',
'minor': 'uint64',
'stats': 'GuestDiskStats' } }
##
# @guest-get-diskstats:
#
# Retrieve information about disk stats.
#
# Returns: List of disk stats of guest.
#
# Since: 7.1
##
{ 'command': 'guest-get-diskstats',
'returns': ['GuestDiskStatsInfo']
}
##
# @GuestCpuStatsType:
#
# Guest operating systems supporting CPU statistics
#
# @linux: Linux
#
# Since: 7.1
##
{ 'enum': 'GuestCpuStatsType',
'data': [ 'linux' ] }
##
# @GuestLinuxCpuStats:
#
# CPU statistics of Linux
#
# @cpu: CPU index in guest OS
#
# @user: Time spent in user mode
#
# @nice: Time spent in user mode with low priority (nice)
#
# @system: Time spent in system mode
#
# @idle: Time spent in the idle task
#
# @iowait: Time waiting for I/O to complete (since Linux 2.5.41)
#
# @irq: Time servicing interrupts (since Linux 2.6.0-test4)
#
# @softirq: Time servicing softirqs (since Linux 2.6.0-test4)
#
# @steal: Stolen time by host (since Linux 2.6.11)
#
# @guest: ime spent running a virtual CPU for guest operating systems
# under the control of the Linux kernel (since Linux 2.6.24)
#
# @guestnice: Time spent running a niced guest (since Linux 2.6.33)
#
# Since: 7.1
##
{ 'struct': 'GuestLinuxCpuStats',
'data': {'cpu': 'int',
'user': 'uint64',
'nice': 'uint64',
'system': 'uint64',
'idle': 'uint64',
'*iowait': 'uint64',
'*irq': 'uint64',
'*softirq': 'uint64',
'*steal': 'uint64',
'*guest': 'uint64',
'*guestnice': 'uint64'
} }
##
# @GuestCpuStats:
#
# Get statistics of each CPU in millisecond.
#
# @type: guest operating system
#
# Since: 7.1
##
{ 'union': 'GuestCpuStats',
'base': { 'type': 'GuestCpuStatsType' },
'discriminator': 'type',
'data': { 'linux': 'GuestLinuxCpuStats' } }
##
# @guest-get-cpustats:
#
# Retrieve information about CPU stats.
#
# Returns: List of CPU stats of guest.
#
# Since: 7.1
##
{ 'command': 'guest-get-cpustats',
'returns': ['GuestCpuStats']
}