Cédric Le Goater 63ceb818a4 aspeed: Add support for the tacoma-bmc board ... The Tacoma BMC board is replacement board for the BMC of the OpenPOWER Witherspoon system. It uses a AST2600 SoC instead of a AST2500 and the I2C layout is the same as it controls the same main board. Used for HW bringup. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-15-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>		2019-12-16 10:46:34 +00:00
..
allwinner-a10.c
armsse.c
armv7m.c
aspeed.c	aspeed: Add support for the tacoma-bmc board	2019-12-16 10:46:34 +00:00
aspeed_ast2600.c	aspeed/i2c: Add support for DMA transfers	2019-12-16 10:46:34 +00:00
aspeed_soc.c	aspeed/i2c: Add support for DMA transfers	2019-12-16 10:46:34 +00:00
bcm2835_peripherals.c	hw/arm/bcm2835_peripherals: Use the SYS_timer	2019-10-25 13:09:27 +01:00
bcm2836.c	hw/arm/bcm2836: Rename cpus[] as cpu[].core	2019-10-25 13:09:27 +01:00
boot.c	hw/arm/boot: Set NSACR.{CP11, CP10} in dummy SMC setup routine	2019-11-11 13:44:16 +00:00
collie.c	hw/arm/collie: Create the RAM in the board	2019-10-22 17:44:01 +01:00
cubieboard.c
digic.c
digic_boards.c	hw/arm/digic4: Inline digic4_board_setup_ram() function	2019-10-22 17:44:01 +01:00
exynos4_boards.c
exynos4210.c	hw/arm/exynos4210: Use the Samsung s3c SDHCI controller	2019-10-22 17:44:00 +01:00
fsl-imx6.c
fsl-imx6ul.c
fsl-imx7.c
fsl-imx25.c
fsl-imx31.c
gumstix.c
highbank.c	hw/arm/highbank: Use AddressSpace when using write_secondary_boot()	2019-10-25 13:09:27 +01:00
imx25_pdk.c
integratorcp.c
Kconfig	hw/arm/virt: Enable device memory cold/hot plug with ACPI boot	2019-10-05 17:12:08 -04:00
kzm.c
mainstone.c
Makefile.objs	aspeed/soc: Add AST2600 support	2019-10-15 18:09:05 +01:00
mcimx6ul-evk.c
mcimx7d-sabre.c
microbit.c
mps2-tz.c	hw/arm/mps2: Use the IEC binary prefix definitions	2019-10-22 17:44:00 +01:00
mps2.c	hw/arm/mps2: Use the IEC binary prefix definitions	2019-10-22 17:44:00 +01:00
msf2-soc.c
msf2-som.c
musca.c	hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory	2019-10-24 20:10:27 +02:00
musicpal.c	hw/arm/musicpal.c: Switch to transaction-based ptimer API	2019-10-15 18:09:02 +01:00
netduino2.c
nrf51_soc.c
nseries.c	hw/arm/omap2: Create the RAM in the board	2019-10-22 17:44:01 +01:00
omap1.c	hw/arm/omap1: Create the RAM in the board	2019-10-22 17:44:01 +01:00
omap2.c	hw/arm/omap2: Create the RAM in the board	2019-10-22 17:44:01 +01:00
omap_sx1.c	hw/arm/omap1: Create the RAM in the board	2019-10-22 17:44:01 +01:00
palm.c	hw/arm/omap1: Create the RAM in the board	2019-10-22 17:44:01 +01:00
pxa2xx.c
pxa2xx_gpio.c
pxa2xx_pic.c
raspi.c	hw/arm/raspi: Use AddressSpace when using arm_boot::write_secondary_boot	2019-10-25 13:09:27 +01:00
realview.c
sabrelite.c
sbsa-ref.c
smmu-common.c
smmu-internal.h
smmuv3-internal.h
smmuv3.c	memory: allow memory_region_register_iommu_notifier() to fail	2019-10-04 18:49:18 +02:00
spitz.c
stellaris.c
stm32f205_soc.c
strongarm.c	hw/arm/collie: Create the RAM in the board	2019-10-22 17:44:01 +01:00
strongarm.h	hw/arm/collie: Create the RAM in the board	2019-10-22 17:44:01 +01:00
sysbus-fdt.c
tosa.c
trace-events
versatilepb.c
vexpress.c
virt-acpi-build.c	hw/arm: Use GED for system_powerdown event	2019-10-05 17:12:09 -04:00
virt.c	virtio-blk: advertise F_WCE (F_FLUSH) if F_CONFIG_WCE is advertised	2019-12-13 11:22:06 +00:00
xilinx_zynq.c	hw/arm/xilinx_zynq: Use the IEC binary prefix definitions	2019-10-22 17:44:00 +01:00
xlnx-versal-virt.c
xlnx-versal.c	hw/arm: versal: Add the CRP as unimplemented	2019-11-26 13:55:36 +00:00
xlnx-zcu102.c
xlnx-zynqmp.c
z2.c