qemu/tests/qemu-iotests/051.out
Paolo Bonzini 6ee7c82d0d monitor: do not use mb_read/mb_set for suspend_cnt
Clean up monitor_event to just use monitor_suspend/monitor_resume,
using mon->mux_out to protect against incorrect nesting (especially
on startup).

The only remaining case of reading suspend_cnt is in the can_read
callback, which is just advisory and can use qatomic_read.

As an extra benefit, mux_out is now simply protected by mon_lock.
Also, moving the prompt to the beginning of the main loop removes
it from the output in some error cases where QEMU does not actually
start successfully.  It is not a full fix and it would be nice to
also remove the monitor heading, but this is already a small (though
unintentional) improvement.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-25 10:18:33 +02:00

474 lines
22 KiB
Plaintext

QA output created by 051
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
=== Unknown option ===
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
=== Unknown protocol option ===
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: Block protocol 'file' doesn't support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: Block protocol 'file' doesn't support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: Block protocol 'file' doesn't support the option 'unknown_opt'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: Block protocol 'file' doesn't support the option 'unknown_opt'
=== Invalid format ===
Testing: -drive file=TEST_DIR/t.qcow2,format=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: Unknown driver 'foo'
Testing: -drive file=TEST_DIR/t.qcow2,driver=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: Unknown driver 'foo'
Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: Cannot specify both 'driver' and 'format'
Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2: Cannot specify both 'driver' and 'format'
=== Node names ===
Testing: -drive file=TEST_DIR/t.qcow2,node-name=x123456789012345678901234567890
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,node-name=x1234567890123456789012345678901
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=x1234567890123456789012345678901: Node name too long
Testing: -drive file=TEST_DIR/t.qcow2,node-name=All-Types.of_all0wed_chars
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,node-name=123foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=123foo: Invalid node-name: '123foo'
Testing: -drive file=TEST_DIR/t.qcow2,node-name=_foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=_foo: Invalid node-name: '_foo'
Testing: -drive file=TEST_DIR/t.qcow2,node-name=foo#12
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=foo#12: Invalid node-name: 'foo#12'
=== Device without drive ===
Testing: -device virtio-scsi -device scsi-hd
QEMU X.Y.Z monitor - type 'help' for more information
QEMU_PROG: -device scsi-hd: drive property not set
=== Overriding backing file ===
Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig,if=none,id=drive0 -nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) info block
drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.orig"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
Removable device: not locked, tray closed
Cache mode: writeback
Backing file: TEST_DIR/t.qcow2.orig (chain depth: 1)
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
=== Enable and disable lazy refcounting on the command line, plus some invalid values ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: Parameter 'lazy-refcounts' expects 'on' or 'off'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: Parameter 'lazy-refcounts' expects 'on' or 'off'
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: Parameter 'lazy-refcounts' expects 'on' or 'off'
=== With version 2 images enabling lazy refcounts must fail ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
=== No medium ===
Testing: -drive if=virtio
QEMU X.Y.Z monitor - type 'help' for more information
QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
=== Attach to node in non-default iothread ===
=== Read-only ===
Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
=== Cache modes ===
Testing: -drive driver=null-co,read-zeroes=on,cache=none
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive driver=null-co,read-zeroes=on,cache=directsync
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive driver=null-co,read-zeroes=on,cache=writeback
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive driver=null-co,read-zeroes=on,cache=writethrough
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive driver=null-co,read-zeroes=on,cache=unsafe
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive driver=null-co,cache=invalid_value
QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option
Testing: -drive file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) info block
drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
Removable device: not locked, tray closed
Cache mode: writeback
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) info block file
file: TEST_DIR/t.qcow2 (file)
Cache mode: writeback
(qemu) info block backing
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
Cache mode: writeback, ignore flushes
(qemu) info block backing-file
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) info block
drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
Removable device: not locked, tray closed
Cache mode: writethrough
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) info block file
file: TEST_DIR/t.qcow2 (file)
Cache mode: writeback
(qemu) info block backing
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
Cache mode: writeback, ignore flushes
(qemu) info block backing-file
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) info block
drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2)
Removable device: not locked, tray closed
Cache mode: writeback, ignore flushes
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
(qemu) info block file
file: TEST_DIR/t.qcow2 (file)
Cache mode: writeback, ignore flushes
(qemu) info block backing
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
Cache mode: writeback, ignore flushes
(qemu) info block backing-file
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
Cache mode: writeback, ignore flushes
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0: invalid cache option
=== Specifying the protocol layer ===
Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
=== Leaving out required options ===
Testing: -drive driver=file
QEMU_PROG: -drive driver=file: The 'file' block driver requires a file name
Testing: -drive driver=file,filename=
QEMU_PROG: -drive driver=file,filename=: The 'file' block driver requires a file name
Testing: -drive driver=nbd
QEMU_PROG: -drive driver=nbd: NBD server address missing
Testing: -drive driver=raw
QEMU_PROG: -drive driver=raw: A block device must be specified for "file"
Testing: -drive file.driver=file
QEMU_PROG: -drive file.driver=file: The 'file' block driver requires a file name
Testing: -drive file.driver=nbd
QEMU_PROG: -drive file.driver=nbd: NBD server address missing
Testing: -drive file.driver=raw
QEMU_PROG: -drive file.driver=raw: A block device must be specified for "file"
Testing: -drive foo=bar
QEMU_PROG: -drive foo=bar: Must specify either driver or file
=== Specifying both an option and its legacy alias ===
Testing: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678: 'throttling.iops-total' and its alias 'iops' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678: 'throttling.iops-read' and its alias 'iops_rd' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678: 'throttling.iops-write' and its alias 'iops_wr' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678: 'throttling.bps-total' and its alias 'bps' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678: 'throttling.bps-read' and its alias 'bps_rd' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678: 'throttling.bps-write' and its alias 'bps_wr' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678: 'throttling.iops-total-max' and its alias 'iops_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678: 'throttling.iops-read-max' and its alias 'iops_rd_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678: 'throttling.iops-write-max' and its alias 'iops_wr_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678: 'throttling.bps-total-max' and its alias 'bps_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678: 'throttling.bps-read-max' and its alias 'bps_rd_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678: 'throttling.bps-write-max' and its alias 'bps_wr_max' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678: 'throttling.iops-size' and its alias 'iops_size' can't be used at the same time
Testing: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' and its alias 'readonly' can't be used at the same time
=== Catching negative/large throttling values ===
Testing: -drive file=TEST_DIR/t.qcow2,iops=-1
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=-1: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps=-2
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=-2: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=-3
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=-3: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps=0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,bps=1
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000000
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001: bps/iops/max values must be within [0, 1000000000000000]
Testing: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999: bps/iops/max values must be within [0, 1000000000000000]
=== Parsing protocol from file name ===
Testing: -hda foo:bar
QEMU_PROG: -hda foo:bar: Unknown protocol 'foo'
Testing: -drive file=foo:bar
QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo'
Testing: -drive file.filename=foo:bar
QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory
Testing: -hda file:TEST_DIR/t.qcow2
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file=file:TEST_DIR/t.qcow2
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file.filename=file:TEST_DIR/t.qcow2
QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
=== Snapshot mode ===
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) quit
Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) quit
Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) quit
Testing: -drive file=file:TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) quit
Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) quit
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) quit
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) quit
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) qemu-io drive0 "write -P 0x33 0 4k"
wrote 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
(qemu) commit drive0
(qemu) quit
read 4096/4096 bytes at offset 0
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
Testing: -drive driver=null-co,snapshot=on
QEMU_PROG: -drive driver=null-co,snapshot=on: Could not open temporary file SNAPSHOT_PATH: No such file or directory
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,read-only=on,if=none,id=drive0
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) info block
drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}}, "driver": "qcow2", "file": {"driver": "file", "filename": SNAPSHOT_PATH}} (qcow2, read-only)
Removable device: not locked, tray closed
Cache mode: writeback, ignore flushes
Backing file: TEST_DIR/t.qcow2 (chain depth: 1)
(qemu) quit
*** done