system/qemu
system/qemu
1
0
Fork 0
mirror of https://gitlab.com/qemu-project/qemu synced 2024-11-05 20:35:44 +00:00
Code Issues Projects Releases Packages Wiki Activity
qemu/hw/vfio/pci-quirks.c
Alex Williamson db32d0f438 vfio/pci: Add option to disable GeForce quirks 
These quirks are necessary for GeForce, but not for Quadro/GRID/Tesla
assignment.  Leaving them enabled is fully functional and provides the
most compatibility, but due to the unique NVIDIA MSI ACK behavior[1],
it also introduces latency in re-triggering the MSI interrupt.  This
overhead is typically negligible, but has been shown to adversely
affect some (very) high interrupt rate applications.  This adds the
vfio-pci device option "x-no-geforce-quirks=" which can be set to
"on" to disable this additional overhead.

A follow-on optimization for GeForce might be to make use of an
ioeventfd to allow KVM to trigger an irqfd in the kernel vfio-pci
driver, avoiding the bounce through userspace to handle this device
write.

[1] Background: the NVIDIA driver has been observed to issue a write
to the MMIO mirror of PCI config space in BAR0 in order to allow the
MSI interrupt for the device to retrigger.  Older reports indicated a
write of 0xff to the (read-only) MSI capability ID register, while
more recently a write of 0x0 is observed at config space offset 0x704,
non-architected, extended config space of the device (BAR0 offset
0x88704).  Virtualization of this range is only required for GeForce.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-02-06 11:08:27 -07:00

1973 lines
68 KiB
C
Raw Blame History

/*
* device quirks for PCI devices
*
* Copyright Red Hat, Inc. 2012-2015
*
* Authors:
* Alex Williamson <alex.williamson@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/error-report.h"
#include "qemu/range.h"
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "hw/nvram/fw_cfg.h"
#include "pci.h"
#include "trace.h"
/* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
static bool vfio_pci_is(VFIOPCIDevice *vdev, uint32_t vendor, uint32_t device)
{
return (vendor == PCI_ANY_ID || vendor == vdev->vendor_id) &&
(device == PCI_ANY_ID || device == vdev->device_id);
}
static bool vfio_is_vga(VFIOPCIDevice *vdev)
{
PCIDevice *pdev = &vdev->pdev;
uint16_t class = pci_get_word(pdev->config + PCI_CLASS_DEVICE);
return class == PCI_CLASS_DISPLAY_VGA;
}
/*
* List of device ids/vendor ids for which to disable
* option rom loading. This avoids the guest hangs during rom
* execution as noticed with the BCM 57810 card for lack of a
* more better way to handle such issues.
* The user can still override by specifying a romfile or
* rombar=1.
* Please see https://bugs.launchpad.net/qemu/+bug/1284874
* for an analysis of the 57810 card hang. When adding
* a new vendor id/device id combination below, please also add
* your card/environment details and information that could
* help in debugging to the bug tracking this issue
*/
static const struct {
uint32_t vendor;
uint32_t device;
} romblacklist[] = {
{ 0x14e4, 0x168e }, /* Broadcom BCM 57810 */
};
bool vfio_blacklist_opt_rom(VFIOPCIDevice *vdev)
{
int i;
for (i = 0 ; i < ARRAY_SIZE(romblacklist); i++) {
if (vfio_pci_is(vdev, romblacklist[i].vendor, romblacklist[i].device)) {
trace_vfio_quirk_rom_blacklisted(vdev->vbasedev.name,
romblacklist[i].vendor,
romblacklist[i].device);
return true;
}
}
return false;
}
/*
* Device specific region quirks (mostly backdoors to PCI config space)
*/
/*
* The generic window quirks operate on an address and data register,
* vfio_generic_window_address_quirk handles the address register and
* vfio_generic_window_data_quirk handles the data register. These ops
* pass reads and writes through to hardware until a value matching the
* stored address match/mask is written. When this occurs, the data
* register access emulated PCI config space for the device rather than
* passing through accesses. This enables devices where PCI config space
* is accessible behind a window register to maintain the virtualization
* provided through vfio.
*/
typedef struct VFIOConfigWindowMatch {
uint32_t match;
uint32_t mask;
} VFIOConfigWindowMatch;
typedef struct VFIOConfigWindowQuirk {
struct VFIOPCIDevice *vdev;
uint32_t address_val;
uint32_t address_offset;
uint32_t data_offset;
bool window_enabled;
uint8_t bar;
MemoryRegion *addr_mem;
MemoryRegion *data_mem;
uint32_t nr_matches;
VFIOConfigWindowMatch matches[];
} VFIOConfigWindowQuirk;
static uint64_t vfio_generic_window_quirk_address_read(void *opaque,
hwaddr addr,
unsigned size)
{
VFIOConfigWindowQuirk *window = opaque;
VFIOPCIDevice *vdev = window->vdev;
return vfio_region_read(&vdev->bars[window->bar].region,
addr + window->address_offset, size);
}
static void vfio_generic_window_quirk_address_write(void *opaque, hwaddr addr,
uint64_t data,
unsigned size)
{
VFIOConfigWindowQuirk *window = opaque;
VFIOPCIDevice *vdev = window->vdev;
int i;
window->window_enabled = false;
vfio_region_write(&vdev->bars[window->bar].region,
addr + window->address_offset, data, size);
for (i = 0; i < window->nr_matches; i++) {
if ((data & ~window->matches[i].mask) == window->matches[i].match) {
window->window_enabled = true;
window->address_val = data & window->matches[i].mask;
trace_vfio_quirk_generic_window_address_write(vdev->vbasedev.name,
memory_region_name(window->addr_mem), data);
break;
}
}
}
static const MemoryRegionOps vfio_generic_window_address_quirk = {
.read = vfio_generic_window_quirk_address_read,
.write = vfio_generic_window_quirk_address_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static uint64_t vfio_generic_window_quirk_data_read(void *opaque,
hwaddr addr, unsigned size)
{
VFIOConfigWindowQuirk *window = opaque;
VFIOPCIDevice *vdev = window->vdev;
uint64_t data;
/* Always read data reg, discard if window enabled */
data = vfio_region_read(&vdev->bars[window->bar].region,
addr + window->data_offset, size);
if (window->window_enabled) {
data = vfio_pci_read_config(&vdev->pdev, window->address_val, size);
trace_vfio_quirk_generic_window_data_read(vdev->vbasedev.name,
memory_region_name(window->data_mem), data);
}
return data;
}
static void vfio_generic_window_quirk_data_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
VFIOConfigWindowQuirk *window = opaque;
VFIOPCIDevice *vdev = window->vdev;
if (window->window_enabled) {
vfio_pci_write_config(&vdev->pdev, window->address_val, data, size);
trace_vfio_quirk_generic_window_data_write(vdev->vbasedev.name,
memory_region_name(window->data_mem), data);
return;
}
vfio_region_write(&vdev->bars[window->bar].region,
addr + window->data_offset, data, size);
}
static const MemoryRegionOps vfio_generic_window_data_quirk = {
.read = vfio_generic_window_quirk_data_read,
.write = vfio_generic_window_quirk_data_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
/*
* The generic mirror quirk handles devices which expose PCI config space
* through a region within a BAR. When enabled, reads and writes are
* redirected through to emulated PCI config space. XXX if PCI config space
* used memory regions, this could just be an alias.
*/
typedef struct VFIOConfigMirrorQuirk {
struct VFIOPCIDevice *vdev;
uint32_t offset;
uint8_t bar;
MemoryRegion *mem;
} VFIOConfigMirrorQuirk;
static uint64_t vfio_generic_quirk_mirror_read(void *opaque,
hwaddr addr, unsigned size)
{
VFIOConfigMirrorQuirk *mirror = opaque;
VFIOPCIDevice *vdev = mirror->vdev;
uint64_t data;
/* Read and discard in case the hardware cares */
(void)vfio_region_read(&vdev->bars[mirror->bar].region,
addr + mirror->offset, size);
data = vfio_pci_read_config(&vdev->pdev, addr, size);
trace_vfio_quirk_generic_mirror_read(vdev->vbasedev.name,
memory_region_name(mirror->mem),
addr, data);
return data;
}
static void vfio_generic_quirk_mirror_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
VFIOConfigMirrorQuirk *mirror = opaque;
VFIOPCIDevice *vdev = mirror->vdev;
vfio_pci_write_config(&vdev->pdev, addr, data, size);
trace_vfio_quirk_generic_mirror_write(vdev->vbasedev.name,
memory_region_name(mirror->mem),
addr, data);
}
static const MemoryRegionOps vfio_generic_mirror_quirk = {
.read = vfio_generic_quirk_mirror_read,
.write = vfio_generic_quirk_mirror_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
/* Is range1 fully contained within range2? */
static bool vfio_range_contained(uint64_t first1, uint64_t len1,
uint64_t first2, uint64_t len2) {
return (first1 >= first2 && first1 + len1 <= first2 + len2);
}
#define PCI_VENDOR_ID_ATI 0x1002
/*
* Radeon HD cards (HD5450 & HD7850) report the upper byte of the I/O port BAR
* through VGA register 0x3c3. On newer cards, the I/O port BAR is always
* BAR4 (older cards like the X550 used BAR1, but we don't care to support
* those). Note that on bare metal, a read of 0x3c3 doesn't always return the
* I/O port BAR address. Originally this was coded to return the virtual BAR
* address only if the physical register read returns the actual BAR address,
* but users have reported greater success if we return the virtual address
* unconditionally.
*/
static uint64_t vfio_ati_3c3_quirk_read(void *opaque,
hwaddr addr, unsigned size)
{
VFIOPCIDevice *vdev = opaque;
uint64_t data = vfio_pci_read_config(&vdev->pdev,
PCI_BASE_ADDRESS_4 + 1, size);
trace_vfio_quirk_ati_3c3_read(vdev->vbasedev.name, data);
return data;
}
static const MemoryRegionOps vfio_ati_3c3_quirk = {
.read = vfio_ati_3c3_quirk_read,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static void vfio_vga_probe_ati_3c3_quirk(VFIOPCIDevice *vdev)
{
VFIOQuirk *quirk;
/*
* As long as the BAR is >= 256 bytes it will be aligned such that the
* lower byte is always zero. Filter out anything else, if it exists.
*/
if (!vfio_pci_is(vdev, PCI_VENDOR_ID_ATI, PCI_ANY_ID) ||
!vdev->bars[4].ioport || vdev->bars[4].region.size < 256) {
return;
}
quirk = g_malloc0(sizeof(*quirk));
quirk->mem = g_new0(MemoryRegion, 1);
quirk->nr_mem = 1;
memory_region_init_io(quirk->mem, OBJECT(vdev), &vfio_ati_3c3_quirk, vdev,
"vfio-ati-3c3-quirk", 1);
memory_region_add_subregion(&vdev->vga->region[QEMU_PCI_VGA_IO_HI].mem,
3 /* offset 3 bytes from 0x3c0 */, quirk->mem);
QLIST_INSERT_HEAD(&vdev->vga->region[QEMU_PCI_VGA_IO_HI].quirks,
quirk, next);
trace_vfio_quirk_ati_3c3_probe(vdev->vbasedev.name);
}
/*
* Newer ATI/AMD devices, including HD5450 and HD7850, have a mirror to PCI
* config space through MMIO BAR2 at offset 0x4000. Nothing seems to access
* the MMIO space directly, but a window to this space is provided through
* I/O port BAR4. Offset 0x0 is the address register and offset 0x4 is the
* data register. When the address is programmed to a range of 0x4000-0x4fff
* PCI configuration space is available. Experimentation seems to indicate
* that read-only may be provided by hardware.
*/
static void vfio_probe_ati_bar4_quirk(VFIOPCIDevice *vdev, int nr)
{
VFIOQuirk *quirk;
VFIOConfigWindowQuirk *window;
/* This windows doesn't seem to be used except by legacy VGA code */
if (!vfio_pci_is(vdev, PCI_VENDOR_ID_ATI, PCI_ANY_ID) ||
!vdev->vga || nr != 4) {
return;
}
quirk = g_malloc0(sizeof(*quirk));
quirk->mem = g_new0(MemoryRegion, 2);
quirk->nr_mem = 2;
window = quirk->data = g_malloc0(sizeof(*window) +
sizeof(VFIOConfigWindowMatch));
window->vdev = vdev;
window->address_offset = 0;
window->data_offset = 4;
window->nr_matches = 1;
window->matches[0].match = 0x4000;
window->matches[0].mask = vdev->config_size - 1;
window->bar = nr;
window->addr_mem = &quirk->mem[0];
window->data_mem = &quirk->mem[1];
memory_region_init_io(window->addr_mem, OBJECT(vdev),
&vfio_generic_window_address_quirk, window,
"vfio-ati-bar4-window-address-quirk", 4);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
window->address_offset,
window->addr_mem, 1);
memory_region_init_io(window->data_mem, OBJECT(vdev),
&vfio_generic_window_data_quirk, window,
"vfio-ati-bar4-window-data-quirk", 4);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
window->data_offset,
window->data_mem, 1);
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
trace_vfio_quirk_ati_bar4_probe(vdev->vbasedev.name);
}
/*
* Trap the BAR2 MMIO mirror to config space as well.
*/
static void vfio_probe_ati_bar2_quirk(VFIOPCIDevice *vdev, int nr)
{
VFIOQuirk *quirk;
VFIOConfigMirrorQuirk *mirror;
/* Only enable on newer devices where BAR2 is 64bit */
if (!vfio_pci_is(vdev, PCI_VENDOR_ID_ATI, PCI_ANY_ID) ||
!vdev->vga || nr != 2 || !vdev->bars[2].mem64) {
return;
}
quirk = g_malloc0(sizeof(*quirk));
mirror = quirk->data = g_malloc0(sizeof(*mirror));
mirror->mem = quirk->mem = g_new0(MemoryRegion, 1);
quirk->nr_mem = 1;
mirror->vdev = vdev;
mirror->offset = 0x4000;
mirror->bar = nr;
memory_region_init_io(mirror->mem, OBJECT(vdev),
&vfio_generic_mirror_quirk, mirror,
"vfio-ati-bar2-4000-quirk", PCI_CONFIG_SPACE_SIZE);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
mirror->offset, mirror->mem, 1);
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
trace_vfio_quirk_ati_bar2_probe(vdev->vbasedev.name);
}
/*
* Older ATI/AMD cards like the X550 have a similar window to that above.
* I/O port BAR1 provides a window to a mirror of PCI config space located
* in BAR2 at offset 0xf00. We don't care to support such older cards, but
* note it for future reference.
*/
#define PCI_VENDOR_ID_NVIDIA 0x10de
/*
* Nvidia has several different methods to get to config space, the
* nouveu project has several of these documented here:
* https://github.com/pathscale/envytools/tree/master/hwdocs
*
* The first quirk is actually not documented in envytools and is found
* on 10de:01d1 (NVIDIA Corporation G72 [GeForce 7300 LE]). This is an
* NV46 chipset. The backdoor uses the legacy VGA I/O ports to access
* the mirror of PCI config space found at BAR0 offset 0x1800. The access
* sequence first writes 0x338 to I/O port 0x3d4. The target offset is
* then written to 0x3d0. Finally 0x538 is written for a read and 0x738
* is written for a write to 0x3d4. The BAR0 offset is then accessible
* through 0x3d0. This quirk doesn't seem to be necessary on newer cards
* that use the I/O port BAR5 window but it doesn't hurt to leave it.
*/
typedef enum {NONE = 0, SELECT, WINDOW, READ, WRITE} VFIONvidia3d0State;
static const char *nv3d0_states[] = { "NONE", "SELECT",
"WINDOW", "READ", "WRITE" };
typedef struct VFIONvidia3d0Quirk {
VFIOPCIDevice *vdev;
VFIONvidia3d0State state;
uint32_t offset;
} VFIONvidia3d0Quirk;
static uint64_t vfio_nvidia_3d4_quirk_read(void *opaque,
hwaddr addr, unsigned size)
{
VFIONvidia3d0Quirk *quirk = opaque;
VFIOPCIDevice *vdev = quirk->vdev;
quirk->state = NONE;
return vfio_vga_read(&vdev->vga->region[QEMU_PCI_VGA_IO_HI],
addr + 0x14, size);
}
static void vfio_nvidia_3d4_quirk_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
VFIONvidia3d0Quirk *quirk = opaque;
VFIOPCIDevice *vdev = quirk->vdev;
VFIONvidia3d0State old_state = quirk->state;
quirk->state = NONE;
switch (data) {
case 0x338:
if (old_state == NONE) {
quirk->state = SELECT;
trace_vfio_quirk_nvidia_3d0_state(vdev->vbasedev.name,
nv3d0_states[quirk->state]);
}
break;
case 0x538:
if (old_state == WINDOW) {
quirk->state = READ;
trace_vfio_quirk_nvidia_3d0_state(vdev->vbasedev.name,
nv3d0_states[quirk->state]);
}
break;
case 0x738:
if (old_state == WINDOW) {
quirk->state = WRITE;
trace_vfio_quirk_nvidia_3d0_state(vdev->vbasedev.name,
nv3d0_states[quirk->state]);
}
break;
}
vfio_vga_write(&vdev->vga->region[QEMU_PCI_VGA_IO_HI],
addr + 0x14, data, size);
}
static const MemoryRegionOps vfio_nvidia_3d4_quirk = {
.read = vfio_nvidia_3d4_quirk_read,
.write = vfio_nvidia_3d4_quirk_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static uint64_t vfio_nvidia_3d0_quirk_read(void *opaque,
hwaddr addr, unsigned size)
{
VFIONvidia3d0Quirk *quirk = opaque;
VFIOPCIDevice *vdev = quirk->vdev;
VFIONvidia3d0State old_state = quirk->state;
uint64_t data = vfio_vga_read(&vdev->vga->region[QEMU_PCI_VGA_IO_HI],
addr + 0x10, size);
quirk->state = NONE;
if (old_state == READ &&
(quirk->offset & ~(PCI_CONFIG_SPACE_SIZE - 1)) == 0x1800) {
uint8_t offset = quirk->offset & (PCI_CONFIG_SPACE_SIZE - 1);
data = vfio_pci_read_config(&vdev->pdev, offset, size);
trace_vfio_quirk_nvidia_3d0_read(vdev->vbasedev.name,
offset, size, data);
}
return data;
}
static void vfio_nvidia_3d0_quirk_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
VFIONvidia3d0Quirk *quirk = opaque;
VFIOPCIDevice *vdev = quirk->vdev;
VFIONvidia3d0State old_state = quirk->state;
quirk->state = NONE;
if (old_state == SELECT) {
quirk->offset = (uint32_t)data;
quirk->state = WINDOW;
trace_vfio_quirk_nvidia_3d0_state(vdev->vbasedev.name,
nv3d0_states[quirk->state]);
} else if (old_state == WRITE) {
if ((quirk->offset & ~(PCI_CONFIG_SPACE_SIZE - 1)) == 0x1800) {
uint8_t offset = quirk->offset & (PCI_CONFIG_SPACE_SIZE - 1);
vfio_pci_write_config(&vdev->pdev, offset, data, size);
trace_vfio_quirk_nvidia_3d0_write(vdev->vbasedev.name,
offset, data, size);
return;
}
}
vfio_vga_write(&vdev->vga->region[QEMU_PCI_VGA_IO_HI],
addr + 0x10, data, size);
}
static const MemoryRegionOps vfio_nvidia_3d0_quirk = {
.read = vfio_nvidia_3d0_quirk_read,
.write = vfio_nvidia_3d0_quirk_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static void vfio_vga_probe_nvidia_3d0_quirk(VFIOPCIDevice *vdev)
{
VFIOQuirk *quirk;
VFIONvidia3d0Quirk *data;
if (vdev->no_geforce_quirks ||
!vfio_pci_is(vdev, PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID) ||
!vdev->bars[1].region.size) {
return;
}
quirk = g_malloc0(sizeof(*quirk));
quirk->data = data = g_malloc0(sizeof(*data));
quirk->mem = g_new0(MemoryRegion, 2);
quirk->nr_mem = 2;
data->vdev = vdev;
memory_region_init_io(&quirk->mem[0], OBJECT(vdev), &vfio_nvidia_3d4_quirk,
data, "vfio-nvidia-3d4-quirk", 2);
memory_region_add_subregion(&vdev->vga->region[QEMU_PCI_VGA_IO_HI].mem,
0x14 /* 0x3c0 + 0x14 */, &quirk->mem[0]);
memory_region_init_io(&quirk->mem[1], OBJECT(vdev), &vfio_nvidia_3d0_quirk,
data, "vfio-nvidia-3d0-quirk", 2);
memory_region_add_subregion(&vdev->vga->region[QEMU_PCI_VGA_IO_HI].mem,
0x10 /* 0x3c0 + 0x10 */, &quirk->mem[1]);
QLIST_INSERT_HEAD(&vdev->vga->region[QEMU_PCI_VGA_IO_HI].quirks,
quirk, next);
trace_vfio_quirk_nvidia_3d0_probe(vdev->vbasedev.name);
}
/*
* The second quirk is documented in envytools. The I/O port BAR5 is just
* a set of address/data ports to the MMIO BARs. The BAR we care about is
* again BAR0. This backdoor is apparently a bit newer than the one above
* so we need to not only trap 256 bytes @0x1800, but all of PCI config
* space, including extended space is available at the 4k @0x88000.
*/
typedef struct VFIONvidiaBAR5Quirk {
uint32_t master;
uint32_t enable;
MemoryRegion *addr_mem;
MemoryRegion *data_mem;
bool enabled;
VFIOConfigWindowQuirk window; /* last for match data */
} VFIONvidiaBAR5Quirk;
static void vfio_nvidia_bar5_enable(VFIONvidiaBAR5Quirk *bar5)
{
VFIOPCIDevice *vdev = bar5->window.vdev;
if (((bar5->master & bar5->enable) & 0x1) == bar5->enabled) {
return;
}
bar5->enabled = !bar5->enabled;
trace_vfio_quirk_nvidia_bar5_state(vdev->vbasedev.name,
bar5->enabled ? "Enable" : "Disable");
memory_region_set_enabled(bar5->addr_mem, bar5->enabled);
memory_region_set_enabled(bar5->data_mem, bar5->enabled);
}
static uint64_t vfio_nvidia_bar5_quirk_master_read(void *opaque,
hwaddr addr, unsigned size)
{
VFIONvidiaBAR5Quirk *bar5 = opaque;
VFIOPCIDevice *vdev = bar5->window.vdev;
return vfio_region_read(&vdev->bars[5].region, addr, size);
}
static void vfio_nvidia_bar5_quirk_master_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
VFIONvidiaBAR5Quirk *bar5 = opaque;
VFIOPCIDevice *vdev = bar5->window.vdev;
vfio_region_write(&vdev->bars[5].region, addr, data, size);
bar5->master = data;
vfio_nvidia_bar5_enable(bar5);
}
static const MemoryRegionOps vfio_nvidia_bar5_quirk_master = {
.read = vfio_nvidia_bar5_quirk_master_read,
.write = vfio_nvidia_bar5_quirk_master_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static uint64_t vfio_nvidia_bar5_quirk_enable_read(void *opaque,
hwaddr addr, unsigned size)
{
VFIONvidiaBAR5Quirk *bar5 = opaque;
VFIOPCIDevice *vdev = bar5->window.vdev;
return vfio_region_read(&vdev->bars[5].region, addr + 4, size);
}
static void vfio_nvidia_bar5_quirk_enable_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
VFIONvidiaBAR5Quirk *bar5 = opaque;
VFIOPCIDevice *vdev = bar5->window.vdev;
vfio_region_write(&vdev->bars[5].region, addr + 4, data, size);
bar5->enable = data;
vfio_nvidia_bar5_enable(bar5);
}
static const MemoryRegionOps vfio_nvidia_bar5_quirk_enable = {
.read = vfio_nvidia_bar5_quirk_enable_read,
.write = vfio_nvidia_bar5_quirk_enable_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static void vfio_probe_nvidia_bar5_quirk(VFIOPCIDevice *vdev, int nr)
{
VFIOQuirk *quirk;
VFIONvidiaBAR5Quirk *bar5;
VFIOConfigWindowQuirk *window;
if (vdev->no_geforce_quirks ||
!vfio_pci_is(vdev, PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID) ||
!vdev->vga || nr != 5 || !vdev->bars[5].ioport) {
return;
}
quirk = g_malloc0(sizeof(*quirk));
quirk->mem = g_new0(MemoryRegion, 4);
quirk->nr_mem = 4;
bar5 = quirk->data = g_malloc0(sizeof(*bar5) +
(sizeof(VFIOConfigWindowMatch) * 2));
window = &bar5->window;
window->vdev = vdev;
window->address_offset = 0x8;
window->data_offset = 0xc;
window->nr_matches = 2;
window->matches[0].match = 0x1800;
window->matches[0].mask = PCI_CONFIG_SPACE_SIZE - 1;
window->matches[1].match = 0x88000;
window->matches[1].mask = vdev->config_size - 1;
window->bar = nr;
window->addr_mem = bar5->addr_mem = &quirk->mem[0];
window->data_mem = bar5->data_mem = &quirk->mem[1];
memory_region_init_io(window->addr_mem, OBJECT(vdev),
&vfio_generic_window_address_quirk, window,
"vfio-nvidia-bar5-window-address-quirk", 4);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
window->address_offset,
window->addr_mem, 1);
memory_region_set_enabled(window->addr_mem, false);
memory_region_init_io(window->data_mem, OBJECT(vdev),
&vfio_generic_window_data_quirk, window,
"vfio-nvidia-bar5-window-data-quirk", 4);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
window->data_offset,
window->data_mem, 1);
memory_region_set_enabled(window->data_mem, false);
memory_region_init_io(&quirk->mem[2], OBJECT(vdev),
&vfio_nvidia_bar5_quirk_master, bar5,
"vfio-nvidia-bar5-master-quirk", 4);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
0, &quirk->mem[2], 1);
memory_region_init_io(&quirk->mem[3], OBJECT(vdev),
&vfio_nvidia_bar5_quirk_enable, bar5,
"vfio-nvidia-bar5-enable-quirk", 4);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
4, &quirk->mem[3], 1);
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
trace_vfio_quirk_nvidia_bar5_probe(vdev->vbasedev.name);
}
/*
* Finally, BAR0 itself. We want to redirect any accesses to either
* 0x1800 or 0x88000 through the PCI config space access functions.
*/
static void vfio_nvidia_quirk_mirror_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
VFIOConfigMirrorQuirk *mirror = opaque;
VFIOPCIDevice *vdev = mirror->vdev;
PCIDevice *pdev = &vdev->pdev;
vfio_generic_quirk_mirror_write(opaque, addr, data, size);
/*
* Nvidia seems to acknowledge MSI interrupts by writing 0xff to the
* MSI capability ID register. Both the ID and next register are
* read-only, so we allow writes covering either of those to real hw.
*/
if ((pdev->cap_present & QEMU_PCI_CAP_MSI) &&
vfio_range_contained(addr, size, pdev->msi_cap, PCI_MSI_FLAGS)) {
vfio_region_write(&vdev->bars[mirror->bar].region,
addr + mirror->offset, data, size);
trace_vfio_quirk_nvidia_bar0_msi_ack(vdev->vbasedev.name);
}
}
static const MemoryRegionOps vfio_nvidia_mirror_quirk = {
.read = vfio_generic_quirk_mirror_read,
.write = vfio_nvidia_quirk_mirror_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static void vfio_probe_nvidia_bar0_quirk(VFIOPCIDevice *vdev, int nr)
{
VFIOQuirk *quirk;
VFIOConfigMirrorQuirk *mirror;
if (vdev->no_geforce_quirks ||
!vfio_pci_is(vdev, PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID) ||
!vfio_is_vga(vdev) || nr != 0) {
return;
}
quirk = g_malloc0(sizeof(*quirk));
mirror = quirk->data = g_malloc0(sizeof(*mirror));
mirror->mem = quirk->mem = g_new0(MemoryRegion, 1);
quirk->nr_mem = 1;
mirror->vdev = vdev;
mirror->offset = 0x88000;
mirror->bar = nr;
memory_region_init_io(mirror->mem, OBJECT(vdev),
&vfio_nvidia_mirror_quirk, mirror,
"vfio-nvidia-bar0-88000-mirror-quirk",
vdev->config_size);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
mirror->offset, mirror->mem, 1);
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
/* The 0x1800 offset mirror only seems to get used by legacy VGA */
if (vdev->vga) {
quirk = g_malloc0(sizeof(*quirk));
mirror = quirk->data = g_malloc0(sizeof(*mirror));
mirror->mem = quirk->mem = g_new0(MemoryRegion, 1);
quirk->nr_mem = 1;
mirror->vdev = vdev;
mirror->offset = 0x1800;
mirror->bar = nr;
memory_region_init_io(mirror->mem, OBJECT(vdev),
&vfio_nvidia_mirror_quirk, mirror,
"vfio-nvidia-bar0-1800-mirror-quirk",
PCI_CONFIG_SPACE_SIZE);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
mirror->offset, mirror->mem, 1);
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
}
trace_vfio_quirk_nvidia_bar0_probe(vdev->vbasedev.name);
}
/*
* TODO - Some Nvidia devices provide config access to their companion HDA
* device and even to their parent bridge via these config space mirrors.
* Add quirks for those regions.
*/
#define PCI_VENDOR_ID_REALTEK 0x10ec
/*
* RTL8168 devices have a backdoor that can access the MSI-X table. At BAR2
* offset 0x70 there is a dword data register, offset 0x74 is a dword address
* register. According to the Linux r8169 driver, the MSI-X table is addressed
* when the "type" portion of the address register is set to 0x1. This appears
* to be bits 16:30. Bit 31 is both a write indicator and some sort of
* "address latched" indicator. Bits 12:15 are a mask field, which we can
* ignore because the MSI-X table should always be accessed as a dword (full
* mask). Bits 0:11 is offset within the type.
*
* Example trace:
*
* Read from MSI-X table offset 0
* vfio: vfio_bar_write(0000:05:00.0:BAR2+0x74, 0x1f000, 4) // store read addr
* vfio: vfio_bar_read(0000:05:00.0:BAR2+0x74, 4) = 0x8001f000 // latch
* vfio: vfio_bar_read(0000:05:00.0:BAR2+0x70, 4) = 0xfee00398 // read data
*
* Write 0xfee00000 to MSI-X table offset 0
* vfio: vfio_bar_write(0000:05:00.0:BAR2+0x70, 0xfee00000, 4) // write data
* vfio: vfio_bar_write(0000:05:00.0:BAR2+0x74, 0x8001f000, 4) // do write
* vfio: vfio_bar_read(0000:05:00.0:BAR2+0x74, 4) = 0x1f000 // complete
*/
typedef struct VFIOrtl8168Quirk {
VFIOPCIDevice *vdev;
uint32_t addr;
uint32_t data;
bool enabled;
} VFIOrtl8168Quirk;
static uint64_t vfio_rtl8168_quirk_address_read(void *opaque,
hwaddr addr, unsigned size)
{
VFIOrtl8168Quirk *rtl = opaque;
VFIOPCIDevice *vdev = rtl->vdev;
uint64_t data = vfio_region_read(&vdev->bars[2].region, addr + 0x74, size);
if (rtl->enabled) {
data = rtl->addr ^ 0x80000000U; /* latch/complete */
trace_vfio_quirk_rtl8168_fake_latch(vdev->vbasedev.name, data);
}
return data;
}
static void vfio_rtl8168_quirk_address_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
VFIOrtl8168Quirk *rtl = opaque;
VFIOPCIDevice *vdev = rtl->vdev;
rtl->enabled = false;
if ((data & 0x7fff0000) == 0x10000) { /* MSI-X table */
rtl->enabled = true;
rtl->addr = (uint32_t)data;
if (data & 0x80000000U) { /* Do write */
if (vdev->pdev.cap_present & QEMU_PCI_CAP_MSIX) {
hwaddr offset = data & 0xfff;
uint64_t val = rtl->data;
trace_vfio_quirk_rtl8168_msix_write(vdev->vbasedev.name,
(uint16_t)offset, val);
/* Write to the proper guest MSI-X table instead */
memory_region_dispatch_write(&vdev->pdev.msix_table_mmio,
offset, val, size,
MEMTXATTRS_UNSPECIFIED);
}
return; /* Do not write guest MSI-X data to hardware */
}
}
vfio_region_write(&vdev->bars[2].region, addr + 0x74, data, size);
}
static const MemoryRegionOps vfio_rtl_address_quirk = {
.read = vfio_rtl8168_quirk_address_read,
.write = vfio_rtl8168_quirk_address_write,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
.unaligned = false,
},
.endianness = DEVICE_LITTLE_ENDIAN,
};
static uint64_t vfio_rtl8168_quirk_data_read(void *opaque,
hwaddr addr, unsigned size)
{
VFIOrtl8168Quirk *rtl = opaque;
VFIOPCIDevice *vdev = rtl->vdev;
uint64_t data = vfio_region_read(&vdev->bars[2].region, addr + 0x70, size);
if (rtl->enabled && (vdev->pdev.cap_present & QEMU_PCI_CAP_MSIX)) {
hwaddr offset = rtl->addr & 0xfff;
memory_region_dispatch_read(&vdev->pdev.msix_table_mmio, offset,
&data, size, MEMTXATTRS_UNSPECIFIED);
trace_vfio_quirk_rtl8168_msix_read(vdev->vbasedev.name, offset, data);
}
return data;
}
static void vfio_rtl8168_quirk_data_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
VFIOrtl8168Quirk *rtl = opaque;
VFIOPCIDevice *vdev = rtl->vdev;
rtl->data = (uint32_t)data;
vfio_region_write(&vdev->bars[2].region, addr + 0x70, data, size);
}
static const MemoryRegionOps vfio_rtl_data_quirk = {
.read = vfio_rtl8168_quirk_data_read,
.write = vfio_rtl8168_quirk_data_write,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
.unaligned = false,
},
.endianness = DEVICE_LITTLE_ENDIAN,
};
static void vfio_probe_rtl8168_bar2_quirk(VFIOPCIDevice *vdev, int nr)
{
VFIOQuirk *quirk;
VFIOrtl8168Quirk *rtl;
if (!vfio_pci_is(vdev, PCI_VENDOR_ID_REALTEK, 0x8168) || nr != 2) {
return;
}
quirk = g_malloc0(sizeof(*quirk));
quirk->mem = g_new0(MemoryRegion, 2);
quirk->nr_mem = 2;
quirk->data = rtl = g_malloc0(sizeof(*rtl));
rtl->vdev = vdev;
memory_region_init_io(&quirk->mem[0], OBJECT(vdev),
&vfio_rtl_address_quirk, rtl,
"vfio-rtl8168-window-address-quirk", 4);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
0x74, &quirk->mem[0], 1);
memory_region_init_io(&quirk->mem[1], OBJECT(vdev),
&vfio_rtl_data_quirk, rtl,
"vfio-rtl8168-window-data-quirk", 4);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
0x70, &quirk->mem[1], 1);
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
trace_vfio_quirk_rtl8168_probe(vdev->vbasedev.name);
}
/*
* Intel IGD support
*
* Obviously IGD is not a discrete device, this is evidenced not only by it
* being integrated into the CPU, but by the various chipset and BIOS
* dependencies that it brings along with it. Intel is trying to move away
* from this and Broadwell and newer devices can run in what Intel calls
* "Universal Pass-Through" mode, or UPT. Theoretically in UPT mode, nothing
* more is required beyond assigning the IGD device to a VM. There are
* however support limitations to this mode. It only supports IGD as a
* secondary graphics device in the VM and it doesn't officially support any
* physical outputs.
*
* The code here attempts to enable what we'll call legacy mode assignment,
* IGD retains most of the capabilities we expect for it to have on bare
* metal. To enable this mode, the IGD device must be assigned to the VM
* at PCI address 00:02.0, it must have a ROM, it very likely needs VGA
* support, we must have VM BIOS support for reserving and populating some
* of the required tables, and we need to tweak the chipset with revisions
* and IDs and an LPC/ISA bridge device. The intention is to make all of
* this happen automatically by installing the device at the correct VM PCI
* bus address. If any of the conditions are not met, we cross our fingers
* and hope the user knows better.
*
* NB - It is possible to enable physical outputs in UPT mode by supplying
* an OpRegion table. We don't do this by default because the guest driver
* behaves differently if an OpRegion is provided and no monitor is attached
* vs no OpRegion and a monitor being attached or not. Effectively, if a
* headless setup is desired, the OpRegion gets in the way of that.
*/
/*
* This presumes the device is already known to be an Intel VGA device, so we
* take liberties in which device ID bits match which generation. This should
* not be taken as an indication that all the devices are supported, or even
* supportable, some of them don't even support VT-d.
* See linux:include/drm/i915_pciids.h for IDs.
*/
static int igd_gen(VFIOPCIDevice *vdev)
{
if ((vdev->device_id & 0xfff) == 0xa84) {
return 8; /* Broxton */
}
switch (vdev->device_id & 0xff00) {
/* Old, untested, unavailable, unknown */
case 0x0000:
case 0x2500:
case 0x2700:
case 0x2900:
case 0x2a00:
case 0x2e00:
case 0x3500:
case 0xa000:
return -1;
/* SandyBridge, IvyBridge, ValleyView, Haswell */
case 0x0100:
case 0x0400:
case 0x0a00:
case 0x0c00:
case 0x0d00:
case 0x0f00:
return 6;
/* BroadWell, CherryView, SkyLake, KabyLake */
case 0x1600:
case 0x1900:
case 0x2200:
case 0x5900:
return 8;
}
return 8; /* Assume newer is compatible */
}
typedef struct VFIOIGDQuirk {
struct VFIOPCIDevice *vdev;
uint32_t index;
uint32_t bdsm;
} VFIOIGDQuirk;
#define IGD_GMCH 0x50 /* Graphics Control Register */
#define IGD_BDSM 0x5c /* Base Data of Stolen Memory */
#define IGD_ASLS 0xfc /* ASL Storage Register */
/*
* The OpRegion includes the Video BIOS Table, which seems important for
* telling the driver what sort of outputs it has. Without this, the device
* may work in the guest, but we may not get output. This also requires BIOS
* support to reserve and populate a section of guest memory sufficient for
* the table and to write the base address of that memory to the ASLS register
* of the IGD device.
*/
int vfio_pci_igd_opregion_init(VFIOPCIDevice *vdev,
struct vfio_region_info *info, Error **errp)
{
int ret;
vdev->igd_opregion = g_malloc0(info->size);
ret = pread(vdev->vbasedev.fd, vdev->igd_opregion,
info->size, info->offset);
if (ret != info->size) {
error_setg(errp, "failed to read IGD OpRegion");
g_free(vdev->igd_opregion);
vdev->igd_opregion = NULL;
return -EINVAL;
}
/*
* Provide fw_cfg with a copy of the OpRegion which the VM firmware is to
* allocate 32bit reserved memory for, copy these contents into, and write
* the reserved memory base address to the device ASLS register at 0xFC.
* Alignment of this reserved region seems flexible, but using a 4k page
* alignment seems to work well. This interface assumes a single IGD
* device, which may be at VM address 00:02.0 in legacy mode or another
* address in UPT mode.
*
* NB, there may be future use cases discovered where the VM should have
* direct interaction with the host OpRegion, in which case the write to
* the ASLS register would trigger MemoryRegion setup to enable that.
*/
fw_cfg_add_file(fw_cfg_find(), "etc/igd-opregion",
vdev->igd_opregion, info->size);
trace_vfio_pci_igd_opregion_enabled(vdev->vbasedev.name);
pci_set_long(vdev->pdev.config + IGD_ASLS, 0);
pci_set_long(vdev->pdev.wmask + IGD_ASLS, ~0);
pci_set_long(vdev->emulated_config_bits + IGD_ASLS, ~0);
return 0;
}
/*
* The rather short list of registers that we copy from the host devices.
* The LPC/ISA bridge values are definitely needed to support the vBIOS, the
* host bridge values may or may not be needed depending on the guest OS.
* Since we're only munging revision and subsystem values on the host bridge,
* we don't require our own device. The LPC/ISA bridge needs to be our very
* own though.
*/
typedef struct {
uint8_t offset;
uint8_t len;
} IGDHostInfo;
static const IGDHostInfo igd_host_bridge_infos[] = {
{PCI_REVISION_ID, 2},
{PCI_SUBSYSTEM_VENDOR_ID, 2},
{PCI_SUBSYSTEM_ID, 2},
};
static const IGDHostInfo igd_lpc_bridge_infos[] = {
{PCI_VENDOR_ID, 2},
{PCI_DEVICE_ID, 2},
{PCI_REVISION_ID, 2},
{PCI_SUBSYSTEM_VENDOR_ID, 2},
{PCI_SUBSYSTEM_ID, 2},
};
static int vfio_pci_igd_copy(VFIOPCIDevice *vdev, PCIDevice *pdev,
struct vfio_region_info *info,
const IGDHostInfo *list, int len)
{
int i, ret;
for (i = 0; i < len; i++) {
ret = pread(vdev->vbasedev.fd, pdev->config + list[i].offset,
list[i].len, info->offset + list[i].offset);
if (ret != list[i].len) {
error_report("IGD copy failed: %m");
return -errno;
}
}
return 0;
}
/*
* Stuff a few values into the host bridge.
*/
static int vfio_pci_igd_host_init(VFIOPCIDevice *vdev,
struct vfio_region_info *info)
{
PCIBus *bus;
PCIDevice *host_bridge;
int ret;
bus = pci_device_root_bus(&vdev->pdev);
host_bridge = pci_find_device(bus, 0, PCI_DEVFN(0, 0));
if (!host_bridge) {
error_report("Can't find host bridge");
return -ENODEV;
}
ret = vfio_pci_igd_copy(vdev, host_bridge, info, igd_host_bridge_infos,
ARRAY_SIZE(igd_host_bridge_infos));
if (!ret) {
trace_vfio_pci_igd_host_bridge_enabled(vdev->vbasedev.name);
}
return ret;
}
/*
* IGD LPC/ISA bridge support code. The vBIOS needs this, but we can't write
* arbitrary values into just any bridge, so we must create our own. We try
* to handle if the user has created it for us, which they might want to do
* to enable multifunction so we don't occupy the whole PCI slot.
*/
static void vfio_pci_igd_lpc_bridge_realize(PCIDevice *pdev, Error **errp)
{
if (pdev->devfn != PCI_DEVFN(0x1f, 0)) {
error_setg(errp, "VFIO dummy ISA/LPC bridge must have address 1f.0");
}
}
static void vfio_pci_igd_lpc_bridge_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
dc->desc = "VFIO dummy ISA/LPC bridge for IGD assignment";
dc->hotpluggable = false;
k->realize = vfio_pci_igd_lpc_bridge_realize;
k->class_id = PCI_CLASS_BRIDGE_ISA;
}
static TypeInfo vfio_pci_igd_lpc_bridge_info = {
.name = "vfio-pci-igd-lpc-bridge",
.parent = TYPE_PCI_DEVICE,
.class_init = vfio_pci_igd_lpc_bridge_class_init,
.interfaces = (InterfaceInfo[]) {
{ INTERFACE_CONVENTIONAL_PCI_DEVICE },
{ },
},
};
static void vfio_pci_igd_register_types(void)
{
type_register_static(&vfio_pci_igd_lpc_bridge_info);
}
type_init(vfio_pci_igd_register_types)
static int vfio_pci_igd_lpc_init(VFIOPCIDevice *vdev,
struct vfio_region_info *info)
{
PCIDevice *lpc_bridge;
int ret;
lpc_bridge = pci_find_device(pci_device_root_bus(&vdev->pdev),
0, PCI_DEVFN(0x1f, 0));
if (!lpc_bridge) {
lpc_bridge = pci_create_simple(pci_device_root_bus(&vdev->pdev),
PCI_DEVFN(0x1f, 0), "vfio-pci-igd-lpc-bridge");
}
ret = vfio_pci_igd_copy(vdev, lpc_bridge, info, igd_lpc_bridge_infos,
ARRAY_SIZE(igd_lpc_bridge_infos));
if (!ret) {
trace_vfio_pci_igd_lpc_bridge_enabled(vdev->vbasedev.name);
}
return ret;
}
/*
* IGD Gen8 and newer support up to 8MB for the GTT and use a 64bit PTE
* entry, older IGDs use 2MB and 32bit. Each PTE maps a 4k page. Therefore
* we either have 2M/4k * 4 = 2k or 8M/4k * 8 = 16k as the maximum iobar index
* for programming the GTT.
*
* See linux:include/drm/i915_drm.h for shift and mask values.
*/
static int vfio_igd_gtt_max(VFIOPCIDevice *vdev)
{
uint32_t gmch = vfio_pci_read_config(&vdev->pdev, IGD_GMCH, sizeof(gmch));
int ggms, gen = igd_gen(vdev);
gmch = vfio_pci_read_config(&vdev->pdev, IGD_GMCH, sizeof(gmch));
ggms = (gmch >> (gen < 8 ? 8 : 6)) & 0x3;
if (gen > 6) {
ggms = 1 << ggms;
}
ggms *= 1024 * 1024;
return (ggms / (4 * 1024)) * (gen < 8 ? 4 : 8);
}
/*
* The IGD ROM will make use of stolen memory (GGMS) for support of VESA modes.
* Somehow the host stolen memory range is used for this, but how the ROM gets
* it is a mystery, perhaps it's hardcoded into the ROM. Thankfully though, it
* reprograms the GTT through the IOBAR where we can trap it and transpose the
* programming to the VM allocated buffer. That buffer gets reserved by the VM
* firmware via the fw_cfg entry added below. Here we're just monitoring the
* IOBAR address and data registers to detect a write sequence targeting the
* GTTADR. This code is developed by observed behavior and doesn't have a
* direct spec reference, unfortunately.
*/
static uint64_t vfio_igd_quirk_data_read(void *opaque,
hwaddr addr, unsigned size)
{
VFIOIGDQuirk *igd = opaque;
VFIOPCIDevice *vdev = igd->vdev;
igd->index = ~0;
return vfio_region_read(&vdev->bars[4].region, addr + 4, size);
}
static void vfio_igd_quirk_data_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
VFIOIGDQuirk *igd = opaque;
VFIOPCIDevice *vdev = igd->vdev;
uint64_t val = data;
int gen = igd_gen(vdev);
/*
* Programming the GGMS starts at index 0x1 and uses every 4th index (ie.
* 0x1, 0x5, 0x9, 0xd,...). For pre-Gen8 each 4-byte write is a whole PTE
* entry, with 0th bit enable set. For Gen8 and up, PTEs are 64bit, so
* entries 0x5 & 0xd are the high dword, in our case zero. Each PTE points
* to a 4k page, which we translate to a page from the VM allocated region,
* pointed to by the BDSM register. If this is not set, we fail.
*
* We trap writes to the full configured GTT size, but we typically only
* see the vBIOS writing up to (nearly) the 1MB barrier. In fact it often
* seems to miss the last entry for an even 1MB GTT. Doing a gratuitous
* write of that last entry does work, but is hopefully unnecessary since
* we clear the previous GTT on initialization.
*/
if ((igd->index % 4 == 1) && igd->index < vfio_igd_gtt_max(vdev)) {
if (gen < 8 || (igd->index % 8 == 1)) {
uint32_t base;
base = pci_get_long(vdev->pdev.config + IGD_BDSM);
if (!base) {
hw_error("vfio-igd: Guest attempted to program IGD GTT before "
"BIOS reserved stolen memory. Unsupported BIOS?");
}
val = data - igd->bdsm + base;
} else {
val = 0; /* upper 32bits of pte, we only enable below 4G PTEs */
}
trace_vfio_pci_igd_bar4_write(vdev->vbasedev.name,
igd->index, data, val);
}
vfio_region_write(&vdev->bars[4].region, addr + 4, val, size);
igd->index = ~0;
}
static const MemoryRegionOps vfio_igd_data_quirk = {
.read = vfio_igd_quirk_data_read,
.write = vfio_igd_quirk_data_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static uint64_t vfio_igd_quirk_index_read(void *opaque,
hwaddr addr, unsigned size)
{
VFIOIGDQuirk *igd = opaque;
VFIOPCIDevice *vdev = igd->vdev;
igd->index = ~0;
return vfio_region_read(&vdev->bars[4].region, addr, size);
}
static void vfio_igd_quirk_index_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
VFIOIGDQuirk *igd = opaque;
VFIOPCIDevice *vdev = igd->vdev;
igd->index = data;
vfio_region_write(&vdev->bars[4].region, addr, data, size);
}
static const MemoryRegionOps vfio_igd_index_quirk = {
.read = vfio_igd_quirk_index_read,
.write = vfio_igd_quirk_index_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static void vfio_probe_igd_bar4_quirk(VFIOPCIDevice *vdev, int nr)
{
struct vfio_region_info *rom = NULL, *opregion = NULL,
*host = NULL, *lpc = NULL;
VFIOQuirk *quirk;
VFIOIGDQuirk *igd;
PCIDevice *lpc_bridge;
int i, ret, ggms_mb, gms_mb = 0, gen;
uint64_t *bdsm_size;
uint32_t gmch;
uint16_t cmd_orig, cmd;
Error *err = NULL;
/*
* This must be an Intel VGA device at address 00:02.0 for us to even
* consider enabling legacy mode. The vBIOS has dependencies on the
* PCI bus address.
*/
if (!vfio_pci_is(vdev, PCI_VENDOR_ID_INTEL, PCI_ANY_ID) ||
!vfio_is_vga(vdev) || nr != 4 ||
&vdev->pdev != pci_find_device(pci_device_root_bus(&vdev->pdev),
0, PCI_DEVFN(0x2, 0))) {
return;
}
/*
* We need to create an LPC/ISA bridge at PCI bus address 00:1f.0 that we
* can stuff host values into, so if there's already one there and it's not
* one we can hack on, legacy mode is no-go. Sorry Q35.
*/
lpc_bridge = pci_find_device(pci_device_root_bus(&vdev->pdev),
0, PCI_DEVFN(0x1f, 0));
if (lpc_bridge && !object_dynamic_cast(OBJECT(lpc_bridge),
"vfio-pci-igd-lpc-bridge")) {
error_report("IGD device %s cannot support legacy mode due to existing "
"devices at address 1f.0", vdev->vbasedev.name);
return;
}
/*
* IGD is not a standard, they like to change their specs often. We
* only attempt to support back to SandBridge and we hope that newer
* devices maintain compatibility with generation 8.
*/
gen = igd_gen(vdev);
if (gen != 6 && gen != 8) {
error_report("IGD device %s is unsupported in legacy mode, "
"try SandyBridge or newer", vdev->vbasedev.name);
return;
}
/*
* Most of what we're doing here is to enable the ROM to run, so if
* there's no ROM, there's no point in setting up this quirk.
* NB. We only seem to get BIOS ROMs, so a UEFI VM would need CSM support.
*/
ret = vfio_get_region_info(&vdev->vbasedev,
VFIO_PCI_ROM_REGION_INDEX, &rom);
if ((ret || !rom->size) && !vdev->pdev.romfile) {
error_report("IGD device %s has no ROM, legacy mode disabled",
vdev->vbasedev.name);
goto out;
}
/*
* Ignore the hotplug corner case, mark the ROM failed, we can't
* create the devices we need for legacy mode in the hotplug scenario.
*/
if (vdev->pdev.qdev.hotplugged) {
error_report("IGD device %s hotplugged, ROM disabled, "
"legacy mode disabled", vdev->vbasedev.name);
vdev->rom_read_failed = true;
goto out;
}
/*
* Check whether we have all the vfio device specific regions to
* support legacy mode (added in Linux v4.6). If not, bail.
*/
ret = vfio_get_dev_region_info(&vdev->vbasedev,
VFIO_REGION_TYPE_PCI_VENDOR_TYPE | PCI_VENDOR_ID_INTEL,
VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION, &opregion);
if (ret) {
error_report("IGD device %s does not support OpRegion access,"
"legacy mode disabled", vdev->vbasedev.name);
goto out;
}
ret = vfio_get_dev_region_info(&vdev->vbasedev,
VFIO_REGION_TYPE_PCI_VENDOR_TYPE | PCI_VENDOR_ID_INTEL,
VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG, &host);
if (ret) {
error_report("IGD device %s does not support host bridge access,"
"legacy mode disabled", vdev->vbasedev.name);
goto out;
}
ret = vfio_get_dev_region_info(&vdev->vbasedev,
VFIO_REGION_TYPE_PCI_VENDOR_TYPE | PCI_VENDOR_ID_INTEL,
VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG, &lpc);
if (ret) {
error_report("IGD device %s does not support LPC bridge access,"
"legacy mode disabled", vdev->vbasedev.name);
goto out;
}
gmch = vfio_pci_read_config(&vdev->pdev, IGD_GMCH, 4);
/*
* If IGD VGA Disable is clear (expected) and VGA is not already enabled,
* try to enable it. Probably shouldn't be using legacy mode without VGA,
* but also no point in us enabling VGA if disabled in hardware.
*/
if (!(gmch & 0x2) && !vdev->vga && vfio_populate_vga(vdev, &err)) {
error_reportf_err(err, ERR_PREFIX, vdev->vbasedev.name);
error_report("IGD device %s failed to enable VGA access, "
"legacy mode disabled", vdev->vbasedev.name);
goto out;
}
/* Create our LPC/ISA bridge */
ret = vfio_pci_igd_lpc_init(vdev, lpc);
if (ret) {
error_report("IGD device %s failed to create LPC bridge, "
"legacy mode disabled", vdev->vbasedev.name);
goto out;
}
/* Stuff some host values into the VM PCI host bridge */
ret = vfio_pci_igd_host_init(vdev, host);
if (ret) {
error_report("IGD device %s failed to modify host bridge, "
"legacy mode disabled", vdev->vbasedev.name);
goto out;
}
/* Setup OpRegion access */
ret = vfio_pci_igd_opregion_init(vdev, opregion, &err);
if (ret) {
error_append_hint(&err, "IGD legacy mode disabled\n");
error_reportf_err(err, ERR_PREFIX, vdev->vbasedev.name);
goto out;
}
/* Setup our quirk to munge GTT addresses to the VM allocated buffer */
quirk = g_malloc0(sizeof(*quirk));
quirk->mem = g_new0(MemoryRegion, 2);
quirk->nr_mem = 2;
igd = quirk->data = g_malloc0(sizeof(*igd));
igd->vdev = vdev;
igd->index = ~0;
igd->bdsm = vfio_pci_read_config(&vdev->pdev, IGD_BDSM, 4);
igd->bdsm &= ~((1 << 20) - 1); /* 1MB aligned */
memory_region_init_io(&quirk->mem[0], OBJECT(vdev), &vfio_igd_index_quirk,
igd, "vfio-igd-index-quirk", 4);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
0, &quirk->mem[0], 1);
memory_region_init_io(&quirk->mem[1], OBJECT(vdev), &vfio_igd_data_quirk,
igd, "vfio-igd-data-quirk", 4);
memory_region_add_subregion_overlap(vdev->bars[nr].region.mem,
4, &quirk->mem[1], 1);
QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
/* Determine the size of stolen memory needed for GTT */
ggms_mb = (gmch >> (gen < 8 ? 8 : 6)) & 0x3;
if (gen > 6) {
ggms_mb = 1 << ggms_mb;
}
/*
* Assume we have no GMS memory, but allow it to be overrided by device
* option (experimental). The spec doesn't actually allow zero GMS when
* when IVD (IGD VGA Disable) is clear, but the claim is that it's unused,
* so let's not waste VM memory for it.
*/
gmch &= ~((gen < 8 ? 0x1f : 0xff) << (gen < 8 ? 3 : 8));
if (vdev->igd_gms) {
if (vdev->igd_gms <= 0x10) {
gms_mb = vdev->igd_gms * 32;
gmch |= vdev->igd_gms << (gen < 8 ? 3 : 8);
} else {
error_report("Unsupported IGD GMS value 0x%x", vdev->igd_gms);
vdev->igd_gms = 0;
}
}
/*
* Request reserved memory for stolen memory via fw_cfg. VM firmware
* must allocate a 1MB aligned reserved memory region below 4GB with
* the requested size (in bytes) for use by the Intel PCI class VGA
* device at VM address 00:02.0. The base address of this reserved
* memory region must be written to the device BDSM regsiter at PCI
* config offset 0x5C.
*/
bdsm_size = g_malloc(sizeof(*bdsm_size));
*bdsm_size = cpu_to_le64((ggms_mb + gms_mb) * 1024 * 1024);
fw_cfg_add_file(fw_cfg_find(), "etc/igd-bdsm-size",
bdsm_size, sizeof(*bdsm_size));
/* GMCH is read-only, emulated */
pci_set_long(vdev->pdev.config + IGD_GMCH, gmch);
pci_set_long(vdev->pdev.wmask + IGD_GMCH, 0);
pci_set_long(vdev->emulated_config_bits + IGD_GMCH, ~0);
/* BDSM is read-write, emulated. The BIOS needs to be able to write it */
pci_set_long(vdev->pdev.config + IGD_BDSM, 0);
pci_set_long(vdev->pdev.wmask + IGD_BDSM, ~0);
pci_set_long(vdev->emulated_config_bits + IGD_BDSM, ~0);
/*
* This IOBAR gives us access to GTTADR, which allows us to write to
* the GTT itself. So let's go ahead and write zero to all the GTT
* entries to avoid spurious DMA faults. Be sure I/O access is enabled
* before talking to the device.
*/
if (pread(vdev->vbasedev.fd, &cmd_orig, sizeof(cmd_orig),
vdev->config_offset + PCI_COMMAND) != sizeof(cmd_orig)) {
error_report("IGD device %s - failed to read PCI command register",
vdev->vbasedev.name);
}
cmd = cmd_orig | PCI_COMMAND_IO;
if (pwrite(vdev->vbasedev.fd, &cmd, sizeof(cmd),
vdev->config_offset + PCI_COMMAND) != sizeof(cmd)) {
error_report("IGD device %s - failed to write PCI command register",
vdev->vbasedev.name);
}
for (i = 1; i < vfio_igd_gtt_max(vdev); i += 4) {
vfio_region_write(&vdev->bars[4].region, 0, i, 4);
vfio_region_write(&vdev->bars[4].region, 4, 0, 4);
}
if (pwrite(vdev->vbasedev.fd, &cmd_orig, sizeof(cmd_orig),
vdev->config_offset + PCI_COMMAND) != sizeof(cmd_orig)) {
error_report("IGD device %s - failed to restore PCI command register",
vdev->vbasedev.name);
}
trace_vfio_pci_igd_bdsm_enabled(vdev->vbasedev.name, ggms_mb + gms_mb);
out:
g_free(rom);
g_free(opregion);
g_free(host);
g_free(lpc);
}
/*
* Common quirk probe entry points.
*/
void vfio_vga_quirk_setup(VFIOPCIDevice *vdev)
{
vfio_vga_probe_ati_3c3_quirk(vdev);
vfio_vga_probe_nvidia_3d0_quirk(vdev);
}
void vfio_vga_quirk_exit(VFIOPCIDevice *vdev)
{
VFIOQuirk *quirk;
int i, j;
for (i = 0; i < ARRAY_SIZE(vdev->vga->region); i++) {
QLIST_FOREACH(quirk, &vdev->vga->region[i].quirks, next) {
for (j = 0; j < quirk->nr_mem; j++) {
memory_region_del_subregion(&vdev->vga->region[i].mem,
&quirk->mem[j]);
}
}
}
}
void vfio_vga_quirk_finalize(VFIOPCIDevice *vdev)
{
int i, j;
for (i = 0; i < ARRAY_SIZE(vdev->vga->region); i++) {
while (!QLIST_EMPTY(&vdev->vga->region[i].quirks)) {
VFIOQuirk *quirk = QLIST_FIRST(&vdev->vga->region[i].quirks);
QLIST_REMOVE(quirk, next);
for (j = 0; j < quirk->nr_mem; j++) {
object_unparent(OBJECT(&quirk->mem[j]));
}
g_free(quirk->mem);
g_free(quirk->data);
g_free(quirk);
}
}
}
void vfio_bar_quirk_setup(VFIOPCIDevice *vdev, int nr)
{
vfio_probe_ati_bar4_quirk(vdev, nr);
vfio_probe_ati_bar2_quirk(vdev, nr);
vfio_probe_nvidia_bar5_quirk(vdev, nr);
vfio_probe_nvidia_bar0_quirk(vdev, nr);
vfio_probe_rtl8168_bar2_quirk(vdev, nr);
vfio_probe_igd_bar4_quirk(vdev, nr);
}
void vfio_bar_quirk_exit(VFIOPCIDevice *vdev, int nr)
{
VFIOBAR *bar = &vdev->bars[nr];
VFIOQuirk *quirk;
int i;
QLIST_FOREACH(quirk, &bar->quirks, next) {
for (i = 0; i < quirk->nr_mem; i++) {
memory_region_del_subregion(bar->region.mem, &quirk->mem[i]);
}
}
}
void vfio_bar_quirk_finalize(VFIOPCIDevice *vdev, int nr)
{
VFIOBAR *bar = &vdev->bars[nr];
int i;
while (!QLIST_EMPTY(&bar->quirks)) {
VFIOQuirk *quirk = QLIST_FIRST(&bar->quirks);
QLIST_REMOVE(quirk, next);
for (i = 0; i < quirk->nr_mem; i++) {
object_unparent(OBJECT(&quirk->mem[i]));
}
g_free(quirk->mem);
g_free(quirk->data);
g_free(quirk);
}
}
/*
* Reset quirks
*/
/*
* AMD Radeon PCI config reset, based on Linux:
* drivers/gpu/drm/radeon/ci_smc.c:ci_is_smc_running()
* drivers/gpu/drm/radeon/radeon_device.c:radeon_pci_config_reset
* drivers/gpu/drm/radeon/ci_smc.c:ci_reset_smc()
* drivers/gpu/drm/radeon/ci_smc.c:ci_stop_smc_clock()
* IDs: include/drm/drm_pciids.h
* Registers: http://cgit.freedesktop.org/~agd5f/linux/commit/?id=4e2aa447f6f0
*
* Bonaire and Hawaii GPUs do not respond to a bus reset. This is a bug in the
* hardware that should be fixed on future ASICs. The symptom of this is that
* once the accerlated driver loads, Windows guests will bsod on subsequent
* attmpts to load the driver, such as after VM reset or shutdown/restart. To
* work around this, we do an AMD specific PCI config reset, followed by an SMC
* reset. The PCI config reset only works if SMC firmware is running, so we
* have a dependency on the state of the device as to whether this reset will
* be effective. There are still cases where we won't be able to kick the
* device into working, but this greatly improves the usability overall. The
* config reset magic is relatively common on AMD GPUs, but the setup and SMC
* poking is largely ASIC specific.
*/
static bool vfio_radeon_smc_is_running(VFIOPCIDevice *vdev)
{
uint32_t clk, pc_c;
/*
* Registers 200h and 204h are index and data registers for accessing
* indirect configuration registers within the device.
*/
vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000004, 4);
clk = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000370, 4);
pc_c = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
return (!(clk & 1) && (0x20100 <= pc_c));
}
/*
* The scope of a config reset is controlled by a mode bit in the misc register
* and a fuse, exposed as a bit in another register. The fuse is the default
* (0 = GFX, 1 = whole GPU), the misc bit is a toggle, with the forumula
* scope = !(misc ^ fuse), where the resulting scope is defined the same as
* the fuse. A truth table therefore tells us that if misc == fuse, we need
* to flip the value of the bit in the misc register.
*/
static void vfio_radeon_set_gfx_only_reset(VFIOPCIDevice *vdev)
{
uint32_t misc, fuse;
bool a, b;
vfio_region_write(&vdev->bars[5].region, 0x200, 0xc00c0000, 4);
fuse = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
b = fuse & 64;
vfio_region_write(&vdev->bars[5].region, 0x200, 0xc0000010, 4);
misc = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
a = misc & 2;
if (a == b) {
vfio_region_write(&vdev->bars[5].region, 0x204, misc ^ 2, 4);
vfio_region_read(&vdev->bars[5].region, 0x204, 4); /* flush */
}
}
static int vfio_radeon_reset(VFIOPCIDevice *vdev)
{
PCIDevice *pdev = &vdev->pdev;
int i, ret = 0;
uint32_t data;
/* Defer to a kernel implemented reset */
if (vdev->vbasedev.reset_works) {
trace_vfio_quirk_ati_bonaire_reset_skipped(vdev->vbasedev.name);
return -ENODEV;
}
/* Enable only memory BAR access */
vfio_pci_write_config(pdev, PCI_COMMAND, PCI_COMMAND_MEMORY, 2);
/* Reset only works if SMC firmware is loaded and running */
if (!vfio_radeon_smc_is_running(vdev)) {
ret = -EINVAL;
trace_vfio_quirk_ati_bonaire_reset_no_smc(vdev->vbasedev.name);
goto out;
}
/* Make sure only the GFX function is reset */
vfio_radeon_set_gfx_only_reset(vdev);
/* AMD PCI config reset */
vfio_pci_write_config(pdev, 0x7c, 0x39d5e86b, 4);
usleep(100);
/* Read back the memory size to make sure we're out of reset */
for (i = 0; i < 100000; i++) {
if (vfio_region_read(&vdev->bars[5].region, 0x5428, 4) != 0xffffffff) {
goto reset_smc;
}
usleep(1);
}
trace_vfio_quirk_ati_bonaire_reset_timeout(vdev->vbasedev.name);
reset_smc:
/* Reset SMC */
vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000000, 4);
data = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
data |= 1;
vfio_region_write(&vdev->bars[5].region, 0x204, data, 4);
/* Disable SMC clock */
vfio_region_write(&vdev->bars[5].region, 0x200, 0x80000004, 4);
data = vfio_region_read(&vdev->bars[5].region, 0x204, 4);
data |= 1;
vfio_region_write(&vdev->bars[5].region, 0x204, data, 4);
trace_vfio_quirk_ati_bonaire_reset_done(vdev->vbasedev.name);
out:
/* Restore PCI command register */
vfio_pci_write_config(pdev, PCI_COMMAND, 0, 2);
return ret;
}
void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
{
switch (vdev->vendor_id) {
case 0x1002:
switch (vdev->device_id) {
/* Bonaire */
case 0x6649: /* Bonaire [FirePro W5100] */
case 0x6650:
case 0x6651:
case 0x6658: /* Bonaire XTX [Radeon R7 260X] */
case 0x665c: /* Bonaire XT [Radeon HD 7790/8770 / R9 260 OEM] */
case 0x665d: /* Bonaire [Radeon R7 200 Series] */
/* Hawaii */
case 0x67A0: /* Hawaii XT GL [FirePro W9100] */
case 0x67A1: /* Hawaii PRO GL [FirePro W8100] */
case 0x67A2:
case 0x67A8:
case 0x67A9:
case 0x67AA:
case 0x67B0: /* Hawaii XT [Radeon R9 290X] */
case 0x67B1: /* Hawaii PRO [Radeon R9 290] */
case 0x67B8:
case 0x67B9:
case 0x67BA:
case 0x67BE:
vdev->resetfn = vfio_radeon_reset;
trace_vfio_quirk_ati_bonaire_reset(vdev->vbasedev.name);
break;
}
break;
}
}
/*
* The NVIDIA GPUDirect P2P Vendor capability allows the user to specify
* devices as a member of a clique. Devices within the same clique ID
* are capable of direct P2P. It's the user's responsibility that this
* is correct. The spec says that this may reside at any unused config
* offset, but reserves and recommends hypervisors place this at C8h.
* The spec also states that the hypervisor should place this capability
* at the end of the capability list, thus next is defined as 0h.
*
* +----------------+----------------+----------------+----------------+
* | sig 7:0 ('P') | vndr len (8h) | next (0h) | cap id (9h) |
* +----------------+----------------+----------------+----------------+
* | rsvd 15:7(0h),id 6:3,ver 2:0(0h)| sig 23:8 ('P2') |
* +---------------------------------+---------------------------------+
*
* https://lists.gnu.org/archive/html/qemu-devel/2017-08/pdfUda5iEpgOS.pdf
*/
static void get_nv_gpudirect_clique_id(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
DeviceState *dev = DEVICE(obj);
Property *prop = opaque;
uint8_t *ptr = qdev_get_prop_ptr(dev, prop);
visit_type_uint8(v, name, ptr, errp);
}
static void set_nv_gpudirect_clique_id(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
DeviceState *dev = DEVICE(obj);
Property *prop = opaque;
uint8_t value, *ptr = qdev_get_prop_ptr(dev, prop);
Error *local_err = NULL;
if (dev->realized) {
qdev_prop_set_after_realize(dev, name, errp);
return;
}
visit_type_uint8(v, name, &value, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (value & ~0xF) {
error_setg(errp, "Property %s: valid range 0-15", name);
return;
}
*ptr = value;
}
const PropertyInfo qdev_prop_nv_gpudirect_clique = {
.name = "uint4",
.description = "NVIDIA GPUDirect Clique ID (0 - 15)",
.get = get_nv_gpudirect_clique_id,
.set = set_nv_gpudirect_clique_id,
};
static int vfio_add_nv_gpudirect_cap(VFIOPCIDevice *vdev, Error **errp)
{
PCIDevice *pdev = &vdev->pdev;
int ret, pos = 0xC8;
if (vdev->nv_gpudirect_clique == 0xFF) {
return 0;
}
if (!vfio_pci_is(vdev, PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID)) {
error_setg(errp, "NVIDIA GPUDirect Clique ID: invalid device vendor");
return -EINVAL;
}
if (pci_get_byte(pdev->config + PCI_CLASS_DEVICE + 1) !=
PCI_BASE_CLASS_DISPLAY) {
error_setg(errp, "NVIDIA GPUDirect Clique ID: unsupported PCI class");
return -EINVAL;
}
ret = pci_add_capability(pdev, PCI_CAP_ID_VNDR, pos, 8, errp);
if (ret < 0) {
error_prepend(errp, "Failed to add NVIDIA GPUDirect cap: ");
return ret;
}
memset(vdev->emulated_config_bits + pos, 0xFF, 8);
pos += PCI_CAP_FLAGS;
pci_set_byte(pdev->config + pos++, 8);
pci_set_byte(pdev->config + pos++, 'P');
pci_set_byte(pdev->config + pos++, '2');
pci_set_byte(pdev->config + pos++, 'P');
pci_set_byte(pdev->config + pos++, vdev->nv_gpudirect_clique << 3);
pci_set_byte(pdev->config + pos, 0);
return 0;
}
int vfio_add_virt_caps(VFIOPCIDevice *vdev, Error **errp)
{
int ret;
ret = vfio_add_nv_gpudirect_cap(vdev, errp);
if (ret) {
return ret;
}
return 0;
}
Reference in a new issue View git blame Copy permalink