qemu/hw/sensor/dps310.c
Joel Stanley 46560cb105 hw/misc: Add Infineon DPS310 sensor model
This contains some hardcoded register values that were obtained from the
hardware after reading the temperature.

It does enough to test the Linux kernel driver. The FIFO mode, IRQs and
operation modes other than the default as used by Linux are not modelled.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20210616073358.750472-2-joel@jms.id.au>
[ clg: - Fixed sequential reading
       - Reworked regs_reset_state array
       - Moved model under hw/sensor/ ]
Message-Id: <20210629142336.750058-4-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-20 08:50:59 +02:00

226 lines
5.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2017-2021 Joel Stanley <joel@jms.id.au>, IBM Corporation
*
* Infineon DPS310 temperature and humidity sensor
*
* https://www.infineon.com/cms/en/product/sensor/pressure-sensors/pressure-sensors-for-iot/dps310/
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "hw/hw.h"
#include "hw/i2c/i2c.h"
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "migration/vmstate.h"
#define NUM_REGISTERS 0x33
typedef struct DPS310State {
/*< private >*/
I2CSlave i2c;
/*< public >*/
uint8_t regs[NUM_REGISTERS];
uint8_t len;
uint8_t pointer;
} DPS310State;
#define TYPE_DPS310 "dps310"
#define DPS310(obj) OBJECT_CHECK(DPS310State, (obj), TYPE_DPS310)
#define DPS310_PRS_B2 0x00
#define DPS310_PRS_B1 0x01
#define DPS310_PRS_B0 0x02
#define DPS310_TMP_B2 0x03
#define DPS310_TMP_B1 0x04
#define DPS310_TMP_B0 0x05
#define DPS310_PRS_CFG 0x06
#define DPS310_TMP_CFG 0x07
#define DPS310_TMP_RATE_BITS (0x70)
#define DPS310_MEAS_CFG 0x08
#define DPS310_MEAS_CTRL_BITS (0x07)
#define DPS310_PRESSURE_EN BIT(0)
#define DPS310_TEMP_EN BIT(1)
#define DPS310_BACKGROUND BIT(2)
#define DPS310_PRS_RDY BIT(4)
#define DPS310_TMP_RDY BIT(5)
#define DPS310_SENSOR_RDY BIT(6)
#define DPS310_COEF_RDY BIT(7)
#define DPS310_CFG_REG 0x09
#define DPS310_RESET 0x0c
#define DPS310_RESET_MAGIC (BIT(0) | BIT(3))
#define DPS310_COEF_BASE 0x10
#define DPS310_COEF_LAST 0x21
#define DPS310_COEF_SRC 0x28
static void dps310_reset(DeviceState *dev)
{
DPS310State *s = DPS310(dev);
static const uint8_t regs_reset_state[sizeof(s->regs)] = {
0xfe, 0x2f, 0xee, 0x02, 0x69, 0xa6, 0x00, 0x80, 0xc7, 0x00, 0x00, 0x00,
0x00, 0x10, 0x00, 0x00, 0x0e, 0x1e, 0xdd, 0x13, 0xca, 0x5f, 0x21, 0x52,
0xf9, 0xc6, 0x04, 0xd1, 0xdb, 0x47, 0x00, 0x5b, 0xfb, 0x3a, 0x00, 0x00,
0x20, 0x49, 0x4e, 0xa5, 0x90, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x60, 0x15, 0x02
};
memcpy(s->regs, regs_reset_state, sizeof(s->regs));
s->pointer = 0;
/* TODO: assert these after some timeout ? */
s->regs[DPS310_MEAS_CFG] = DPS310_COEF_RDY | DPS310_SENSOR_RDY
| DPS310_TMP_RDY | DPS310_PRS_RDY;
}
static uint8_t dps310_read(DPS310State *s, uint8_t reg)
{
if (reg >= sizeof(s->regs)) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: register 0x%02x out of bounds\n",
__func__, s->pointer);
return 0xFF;
}
switch (reg) {
case DPS310_PRS_B2:
case DPS310_PRS_B1:
case DPS310_PRS_B0:
case DPS310_TMP_B2:
case DPS310_TMP_B1:
case DPS310_TMP_B0:
case DPS310_PRS_CFG:
case DPS310_TMP_CFG:
case DPS310_MEAS_CFG:
case DPS310_CFG_REG:
case DPS310_COEF_BASE...DPS310_COEF_LAST:
case DPS310_COEF_SRC:
case 0x32: /* Undocumented register to indicate workaround not required */
return s->regs[reg];
default:
qemu_log_mask(LOG_UNIMP, "%s: register 0x%02x unimplemented\n",
__func__, reg);
return 0xFF;
}
}
static void dps310_write(DPS310State *s, uint8_t reg, uint8_t data)
{
if (reg >= sizeof(s->regs)) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: register %d out of bounds\n",
__func__, s->pointer);
return;
}
switch (reg) {
case DPS310_RESET:
if (data == DPS310_RESET_MAGIC) {
device_cold_reset(DEVICE(s));
}
break;
case DPS310_PRS_CFG:
case DPS310_TMP_CFG:
case DPS310_MEAS_CFG:
case DPS310_CFG_REG:
s->regs[reg] = data;
break;
default:
qemu_log_mask(LOG_UNIMP, "%s: register 0x%02x unimplemented\n",
__func__, reg);
return;
}
}
static uint8_t dps310_rx(I2CSlave *i2c)
{
DPS310State *s = DPS310(i2c);
if (s->len == 1) {
return dps310_read(s, s->pointer++);
} else {
return 0xFF;
}
}
static int dps310_tx(I2CSlave *i2c, uint8_t data)
{
DPS310State *s = DPS310(i2c);
if (s->len == 0) {
/*
* first byte is the register pointer for a read or write
* operation
*/
s->pointer = data;
s->len++;
} else if (s->len == 1) {
dps310_write(s, s->pointer++, data);
}
return 0;
}
static int dps310_event(I2CSlave *i2c, enum i2c_event event)
{
DPS310State *s = DPS310(i2c);
switch (event) {
case I2C_START_SEND:
s->pointer = 0xFF;
s->len = 0;
break;
case I2C_START_RECV:
if (s->len != 1) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid recv sequence\n",
__func__);
}
break;
default:
break;
}
return 0;
}
static const VMStateDescription vmstate_dps310 = {
.name = "DPS310",
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_UINT8(len, DPS310State),
VMSTATE_UINT8_ARRAY(regs, DPS310State, NUM_REGISTERS),
VMSTATE_UINT8(pointer, DPS310State),
VMSTATE_I2C_SLAVE(i2c, DPS310State),
VMSTATE_END_OF_LIST()
}
};
static void dps310_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
k->event = dps310_event;
k->recv = dps310_rx;
k->send = dps310_tx;
dc->reset = dps310_reset;
dc->vmsd = &vmstate_dps310;
}
static const TypeInfo dps310_info = {
.name = TYPE_DPS310,
.parent = TYPE_I2C_SLAVE,
.instance_size = sizeof(DPS310State),
.class_init = dps310_class_init,
};
static void dps310_register_types(void)
{
type_register_static(&dps310_info);
}
type_init(dps310_register_types)