qemu/hw/pcie.c
Isaku Yamahata 0ead87c8de pcie: add flr support
Support flr: trigger device reset on flr config write.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-22 09:01:53 +02:00

545 lines
19 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* pcie.c
*
* Copyright (c) 2010 Isaku Yamahata <yamahata at valinux co jp>
* VA Linux Systems Japan K.K.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "sysemu.h"
#include "range.h"
#include "pci_bridge.h"
#include "pcie.h"
#include "msix.h"
#include "msi.h"
#include "pci_internals.h"
#include "pcie_regs.h"
#include "range.h"
//#define DEBUG_PCIE
#ifdef DEBUG_PCIE
# define PCIE_DPRINTF(fmt, ...) \
fprintf(stderr, "%s:%d " fmt, __func__, __LINE__, ## __VA_ARGS__)
#else
# define PCIE_DPRINTF(fmt, ...) do {} while (0)
#endif
#define PCIE_DEV_PRINTF(dev, fmt, ...) \
PCIE_DPRINTF("%s:%x "fmt, (dev)->name, (dev)->devfn, ## __VA_ARGS__)
/***************************************************************************
* pci express capability helper functions
*/
int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, uint8_t port)
{
int pos;
uint8_t *exp_cap;
assert(pci_is_express(dev));
pos = pci_add_capability(dev, PCI_CAP_ID_EXP, offset,
PCI_EXP_VER2_SIZEOF);
if (pos < 0) {
return pos;
}
dev->exp.exp_cap = pos;
exp_cap = dev->config + pos;
/* capability register
interrupt message number defaults to 0 */
pci_set_word(exp_cap + PCI_EXP_FLAGS,
((type << PCI_EXP_FLAGS_TYPE_SHIFT) & PCI_EXP_FLAGS_TYPE) |
PCI_EXP_FLAGS_VER2);
/* device capability register
* table 7-12:
* roll based error reporting bit must be set by all
* Functions conforming to the ECN, PCI Express Base
* Specification, Revision 1.1., or subsequent PCI Express Base
* Specification revisions.
*/
pci_set_long(exp_cap + PCI_EXP_DEVCAP, PCI_EXP_DEVCAP_RBER);
pci_set_long(exp_cap + PCI_EXP_LNKCAP,
(port << PCI_EXP_LNKCAP_PN_SHIFT) |
PCI_EXP_LNKCAP_ASPMS_0S |
PCI_EXP_LNK_MLW_1 |
PCI_EXP_LNK_LS_25);
pci_set_word(exp_cap + PCI_EXP_LNKSTA,
PCI_EXP_LNK_MLW_1 | PCI_EXP_LNK_LS_25);
pci_set_long(exp_cap + PCI_EXP_DEVCAP2,
PCI_EXP_DEVCAP2_EFF | PCI_EXP_DEVCAP2_EETLPP);
pci_set_word(dev->wmask + pos, PCI_EXP_DEVCTL2_EETLPPB);
return pos;
}
void pcie_cap_exit(PCIDevice *dev)
{
pci_del_capability(dev, PCI_CAP_ID_EXP, PCI_EXP_VER2_SIZEOF);
}
uint8_t pcie_cap_get_type(const PCIDevice *dev)
{
uint32_t pos = dev->exp.exp_cap;
assert(pos > 0);
return (pci_get_word(dev->config + pos + PCI_EXP_FLAGS) &
PCI_EXP_FLAGS_TYPE) >> PCI_EXP_FLAGS_TYPE_SHIFT;
}
/* MSI/MSI-X */
/* pci express interrupt message number */
/* 7.8.2 PCI Express Capabilities Register: Interrupt Message Number */
void pcie_cap_flags_set_vector(PCIDevice *dev, uint8_t vector)
{
uint8_t *exp_cap = dev->config + dev->exp.exp_cap;
assert(vector < 32);
pci_word_test_and_clear_mask(exp_cap + PCI_EXP_FLAGS, PCI_EXP_FLAGS_IRQ);
pci_word_test_and_set_mask(exp_cap + PCI_EXP_FLAGS,
vector << PCI_EXP_FLAGS_IRQ_SHIFT);
}
uint8_t pcie_cap_flags_get_vector(PCIDevice *dev)
{
return (pci_get_word(dev->config + dev->exp.exp_cap + PCI_EXP_FLAGS) &
PCI_EXP_FLAGS_IRQ) >> PCI_EXP_FLAGS_IRQ_SHIFT;
}
void pcie_cap_deverr_init(PCIDevice *dev)
{
uint32_t pos = dev->exp.exp_cap;
pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_DEVCAP,
PCI_EXP_DEVCAP_RBER);
pci_long_test_and_set_mask(dev->wmask + pos + PCI_EXP_DEVCTL,
PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE |
PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE);
pci_long_test_and_set_mask(dev->w1cmask + pos + PCI_EXP_DEVSTA,
PCI_EXP_DEVSTA_CED | PCI_EXP_DEVSTA_NFED |
PCI_EXP_DEVSTA_URD | PCI_EXP_DEVSTA_URD);
}
void pcie_cap_deverr_reset(PCIDevice *dev)
{
uint8_t *devctl = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL;
pci_long_test_and_clear_mask(devctl,
PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE |
PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE);
}
static void hotplug_event_update_event_status(PCIDevice *dev)
{
uint32_t pos = dev->exp.exp_cap;
uint8_t *exp_cap = dev->config + pos;
uint16_t sltctl = pci_get_word(exp_cap + PCI_EXP_SLTCTL);
uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
dev->exp.hpev_notified = (sltctl & PCI_EXP_SLTCTL_HPIE) &&
(sltsta & sltctl & PCI_EXP_HP_EV_SUPPORTED);
}
static void hotplug_event_notify(PCIDevice *dev)
{
bool prev = dev->exp.hpev_notified;
hotplug_event_update_event_status(dev);
if (prev == dev->exp.hpev_notified) {
return;
}
/* Note: the logic above does not take into account whether interrupts
* are masked. The result is that interrupt will be sent when it is
* subsequently unmasked. This appears to be legal: Section 6.7.3.4:
* The Port may optionally send an MSI when there are hot-plug events that
* occur while interrupt generation is disabled, and interrupt generation is
* subsequently enabled. */
if (msix_enabled(dev)) {
msix_notify(dev, pcie_cap_flags_get_vector(dev));
} else if (msi_enabled(dev)) {
msi_notify(dev, pcie_cap_flags_get_vector(dev));
} else {
qemu_set_irq(dev->irq[dev->exp.hpev_intx], dev->exp.hpev_notified);
}
}
/*
* A PCI Express Hot-Plug Event has occured, so update slot status register
* and notify OS of the event if necessary.
*
* 6.7.3 PCI Express Hot-Plug Events
* 6.7.3.4 Software Notification of Hot-Plug Events
*/
static void pcie_cap_slot_event(PCIDevice *dev, PCIExpressHotPlugEvent event)
{
/* Minor optimization: if nothing changed - no event is needed. */
if (pci_word_test_and_set_mask(dev->config + dev->exp.exp_cap +
PCI_EXP_SLTSTA, event)) {
return;
}
hotplug_event_notify(dev);
}
static int pcie_cap_slot_hotplug(DeviceState *qdev,
PCIDevice *pci_dev, PCIHotplugState state)
{
PCIDevice *d = DO_UPCAST(PCIDevice, qdev, qdev);
uint8_t *exp_cap = d->config + d->exp.exp_cap;
uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
/* Don't send event when device is enabled during qemu machine creation:
* it is present on boot, no hotplug event is necessary. We do send an
* event when the device is disabled later. */
if (state == PCI_COLDPLUG_ENABLED) {
pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_PDS);
return 0;
}
PCIE_DEV_PRINTF(pci_dev, "hotplug state: %d\n", state);
if (sltsta & PCI_EXP_SLTSTA_EIS) {
/* the slot is electromechanically locked.
* This error is propagated up to qdev and then to HMP/QMP.
*/
return -EBUSY;
}
/* TODO: multifunction hot-plug.
* Right now, only a device of function = 0 is allowed to be
* hot plugged/unplugged.
*/
assert(PCI_FUNC(pci_dev->devfn) == 0);
if (state == PCI_HOTPLUG_ENABLED) {
pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_PDS);
pcie_cap_slot_event(d, PCI_EXP_HP_EV_PDC);
} else {
qdev_free(&pci_dev->qdev);
pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_PDS);
pcie_cap_slot_event(d, PCI_EXP_HP_EV_PDC);
}
return 0;
}
/* pci express slot for pci express root/downstream port
PCI express capability slot registers */
void pcie_cap_slot_init(PCIDevice *dev, uint16_t slot)
{
uint32_t pos = dev->exp.exp_cap;
pci_word_test_and_set_mask(dev->config + pos + PCI_EXP_FLAGS,
PCI_EXP_FLAGS_SLOT);
pci_long_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCAP,
~PCI_EXP_SLTCAP_PSN);
pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCAP,
(slot << PCI_EXP_SLTCAP_PSN_SHIFT) |
PCI_EXP_SLTCAP_EIP |
PCI_EXP_SLTCAP_HPS |
PCI_EXP_SLTCAP_HPC |
PCI_EXP_SLTCAP_PIP |
PCI_EXP_SLTCAP_AIP |
PCI_EXP_SLTCAP_ABP);
pci_word_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCTL,
PCI_EXP_SLTCTL_PIC |
PCI_EXP_SLTCTL_AIC);
pci_word_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCTL,
PCI_EXP_SLTCTL_PIC_OFF |
PCI_EXP_SLTCTL_AIC_OFF);
pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL,
PCI_EXP_SLTCTL_PIC |
PCI_EXP_SLTCTL_AIC |
PCI_EXP_SLTCTL_HPIE |
PCI_EXP_SLTCTL_CCIE |
PCI_EXP_SLTCTL_PDCE |
PCI_EXP_SLTCTL_ABPE);
/* Although reading PCI_EXP_SLTCTL_EIC returns always 0,
* make the bit writable here in order to detect 1b is written.
* pcie_cap_slot_write_config() test-and-clear the bit, so
* this bit always returns 0 to the guest.
*/
pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL,
PCI_EXP_SLTCTL_EIC);
pci_word_test_and_set_mask(dev->w1cmask + pos + PCI_EXP_SLTSTA,
PCI_EXP_HP_EV_SUPPORTED);
dev->exp.hpev_notified = false;
pci_bus_hotplug(pci_bridge_get_sec_bus(DO_UPCAST(PCIBridge, dev, dev)),
pcie_cap_slot_hotplug, &dev->qdev);
}
void pcie_cap_slot_reset(PCIDevice *dev)
{
uint8_t *exp_cap = dev->config + dev->exp.exp_cap;
PCIE_DEV_PRINTF(dev, "reset\n");
pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL,
PCI_EXP_SLTCTL_EIC |
PCI_EXP_SLTCTL_PIC |
PCI_EXP_SLTCTL_AIC |
PCI_EXP_SLTCTL_HPIE |
PCI_EXP_SLTCTL_CCIE |
PCI_EXP_SLTCTL_PDCE |
PCI_EXP_SLTCTL_ABPE);
pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTCTL,
PCI_EXP_SLTCTL_PIC_OFF |
PCI_EXP_SLTCTL_AIC_OFF);
pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA,
PCI_EXP_SLTSTA_EIS |/* on reset,
the lock is released */
PCI_EXP_SLTSTA_CC |
PCI_EXP_SLTSTA_PDC |
PCI_EXP_SLTSTA_ABP);
hotplug_event_update_event_status(dev);
}
void pcie_cap_slot_write_config(PCIDevice *dev,
uint32_t addr, uint32_t val, int len)
{
uint32_t pos = dev->exp.exp_cap;
uint8_t *exp_cap = dev->config + pos;
uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
if (!ranges_overlap(addr, len, pos + PCI_EXP_SLTCTL, 2)) {
return;
}
if (pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL,
PCI_EXP_SLTCTL_EIC)) {
sltsta ^= PCI_EXP_SLTSTA_EIS; /* toggle PCI_EXP_SLTSTA_EIS bit */
pci_set_word(exp_cap + PCI_EXP_SLTSTA, sltsta);
PCIE_DEV_PRINTF(dev, "PCI_EXP_SLTCTL_EIC: "
"sltsta -> 0x%02"PRIx16"\n",
sltsta);
}
hotplug_event_notify(dev);
/*
* 6.7.3.2 Command Completed Events
*
* Software issues a command to a hot-plug capable Downstream Port by
* issuing a write transaction that targets any portion of the Ports Slot
* Control register. A single write to the Slot Control register is
* considered to be a single command, even if the write affects more than
* one field in the Slot Control register. In response to this transaction,
* the Port must carry out the requested actions and then set the
* associated status field for the command completed event. */
/* Real hardware might take a while to complete requested command because
* physical movement would be involved like locking the electromechanical
* lock. However in our case, command is completed instantaneously above,
* so send a command completion event right now.
*/
pcie_cap_slot_event(dev, PCI_EXP_HP_EV_CCI);
}
int pcie_cap_slot_post_load(void *opaque, int version_id)
{
PCIDevice *dev = opaque;
hotplug_event_update_event_status(dev);
return 0;
}
void pcie_cap_slot_push_attention_button(PCIDevice *dev)
{
pcie_cap_slot_event(dev, PCI_EXP_HP_EV_ABP);
}
/* root control/capabilities/status. PME isn't emulated for now */
void pcie_cap_root_init(PCIDevice *dev)
{
pci_set_word(dev->wmask + dev->exp.exp_cap + PCI_EXP_RTCTL,
PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE |
PCI_EXP_RTCTL_SEFEE);
}
void pcie_cap_root_reset(PCIDevice *dev)
{
pci_set_word(dev->config + dev->exp.exp_cap + PCI_EXP_RTCTL, 0);
}
/* function level reset(FLR) */
void pcie_cap_flr_init(PCIDevice *dev)
{
pci_long_test_and_set_mask(dev->config + dev->exp.exp_cap + PCI_EXP_DEVCAP,
PCI_EXP_DEVCAP_FLR);
/* Although reading BCR_FLR returns always 0,
* the bit is made writable here in order to detect the 1b is written
* pcie_cap_flr_write_config() test-and-clear the bit, so
* this bit always returns 0 to the guest.
*/
pci_word_test_and_set_mask(dev->wmask + dev->exp.exp_cap + PCI_EXP_DEVCTL,
PCI_EXP_DEVCTL_BCR_FLR);
}
void pcie_cap_flr_write_config(PCIDevice *dev,
uint32_t addr, uint32_t val, int len)
{
uint8_t *devctl = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL;
if (pci_get_word(devctl) & PCI_EXP_DEVCTL_BCR_FLR) {
/* Clear PCI_EXP_DEVCTL_BCR_FLR after invoking the reset handler
so the handler can detect FLR by looking at this bit. */
pci_device_reset(dev);
pci_word_test_and_clear_mask(devctl, PCI_EXP_DEVCTL_BCR_FLR);
}
}
/* Alternative Routing-ID Interpretation (ARI) */
/* ari forwarding support for down stream port */
void pcie_cap_ari_init(PCIDevice *dev)
{
uint32_t pos = dev->exp.exp_cap;
pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_DEVCAP2,
PCI_EXP_DEVCAP2_ARI);
pci_long_test_and_set_mask(dev->wmask + pos + PCI_EXP_DEVCTL2,
PCI_EXP_DEVCTL2_ARI);
}
void pcie_cap_ari_reset(PCIDevice *dev)
{
uint8_t *devctl2 = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL2;
pci_long_test_and_clear_mask(devctl2, PCI_EXP_DEVCTL2_ARI);
}
bool pcie_cap_is_ari_enabled(const PCIDevice *dev)
{
if (!pci_is_express(dev)) {
return false;
}
if (!dev->exp.exp_cap) {
return false;
}
return pci_get_long(dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL2) &
PCI_EXP_DEVCTL2_ARI;
}
/**************************************************************************
* pci express extended capability allocation functions
* uint16_t ext_cap_id (16 bit)
* uint8_t cap_ver (4 bit)
* uint16_t cap_offset (12 bit)
* uint16_t ext_cap_size
*/
static uint16_t pcie_find_capability_list(PCIDevice *dev, uint16_t cap_id,
uint16_t *prev_p)
{
uint16_t prev = 0;
uint16_t next;
uint32_t header = pci_get_long(dev->config + PCI_CONFIG_SPACE_SIZE);
if (!header) {
/* no extended capability */
next = 0;
goto out;
}
for (next = PCI_CONFIG_SPACE_SIZE; next;
prev = next, next = PCI_EXT_CAP_NEXT(header)) {
assert(next >= PCI_CONFIG_SPACE_SIZE);
assert(next <= PCIE_CONFIG_SPACE_SIZE - 8);
header = pci_get_long(dev->config + next);
if (PCI_EXT_CAP_ID(header) == cap_id) {
break;
}
}
out:
if (prev_p) {
*prev_p = prev;
}
return next;
}
uint16_t pcie_find_capability(PCIDevice *dev, uint16_t cap_id)
{
return pcie_find_capability_list(dev, cap_id, NULL);
}
static void pcie_ext_cap_set_next(PCIDevice *dev, uint16_t pos, uint16_t next)
{
uint16_t header = pci_get_long(dev->config + pos);
assert(!(next & (PCI_EXT_CAP_ALIGN - 1)));
header = (header & ~PCI_EXT_CAP_NEXT_MASK) |
((next << PCI_EXT_CAP_NEXT_SHIFT) & PCI_EXT_CAP_NEXT_MASK);
pci_set_long(dev->config + pos, header);
}
/*
* caller must supply valid (offset, size) * such that the range shouldn't
* overlap with other capability or other registers.
* This function doesn't check it.
*/
void pcie_add_capability(PCIDevice *dev,
uint16_t cap_id, uint8_t cap_ver,
uint16_t offset, uint16_t size)
{
uint32_t header;
uint16_t next;
assert(offset >= PCI_CONFIG_SPACE_SIZE);
assert(offset < offset + size);
assert(offset + size < PCIE_CONFIG_SPACE_SIZE);
assert(size >= 8);
assert(pci_is_express(dev));
if (offset == PCI_CONFIG_SPACE_SIZE) {
header = pci_get_long(dev->config + offset);
next = PCI_EXT_CAP_NEXT(header);
} else {
uint16_t prev;
/* 0 is reserved cap id. use internally to find the last capability
in the linked list */
next = pcie_find_capability_list(dev, 0, &prev);
assert(prev >= PCI_CONFIG_SPACE_SIZE);
assert(next == 0);
pcie_ext_cap_set_next(dev, prev, offset);
}
pci_set_long(dev->config + offset, PCI_EXT_CAP(cap_id, cap_ver, next));
/* Make capability read-only by default */
memset(dev->wmask + offset, 0, size);
memset(dev->w1cmask + offset, 0, size);
/* Check capability by default */
memset(dev->cmask + offset, 0xFF, size);
}
/**************************************************************************
* pci express extended capability helper functions
*/
/* ARI */
void pcie_ari_init(PCIDevice *dev, uint16_t offset, uint16_t nextfn)
{
pcie_add_capability(dev, PCI_EXT_CAP_ID_ARI, PCI_ARI_VER,
offset, PCI_ARI_SIZEOF);
pci_set_long(dev->config + offset + PCI_ARI_CAP, PCI_ARI_CAP_NFN(nextfn));
}